RE: Compile errors for gnome-pilot 0.1.66

[jruscio <jruscio vt edu>]

All,

You are on the right track. I went and talked to some of the guys on the 
#pilot-link channel and got the issue tracked down....mad props and thanks to 
"jpr" and "setuid" for all their help.

After running configure but BEFORE running make, the makefile needs to be 
hacked...here is the Perl command to do it:

perl -pi -e 's/PISOCK_LIBS = -lpisock/PISOCK_LIBS = -lpisock -lpisync/g' `find 
. -name Makefile`

That typed in exactly as posted here will alter the makefile to append a 
"-lpisync" to all definitions of PISOCK_LIBS or you could just do what Pavel 
Hlavnicka suggest when you run configure

I did this and it compiled fine...now I "just" need to get Evolution 
recompiled...looks linke fun from the Readme they included.....:-)

-Joe Ruscio
Virginia Tech CS

>===== Original Message From Pavel Hlavnicka <pavel gingerall cz> =====
>There is somthing strange in the aclocal.m4, somebody competent should
>take a look :)
>
>If you specify the --with-pisock to the configure script, all works
>quite fine. try ./configure --with-pisock=/usr/local (or whatever else).
>
>If one doesn't add this switch, there if -lpisock added to the library
>list, but -lpisync (what is definitely needed) is omitted.
>
>jruscio wrote:
>> All,
>>
>> In an attempt to get my new Visor Edge and evolution playing together, 
today I
>> downloaded the source for the following pkgs:
>>
>> pilot-link-0.11.4.tar.gz
>> gnome-pilot-0.1.66.tar.gz
>> gnome-pilot-conduits-0.10.tar.gz
>> evolution-1.0.8.99-snap.ximian.200208120601.src.rpm
>>
>> 1.) I removed every exsisting gnome-pilot/pilot-link/*libs I could find on 
my
>> system(Mandrake 8.2).
>>
>> 2.) I compiled and installed pilot-link
>>
>> 3.) I tested the new pilot-xfer and it works flawlessly
>>
>> 4.)I ran ./configure on gnome-pilot and it found the new version of
>> pilot-link:
>>   Configuration :
>>
>>           gnome-vfs    : no
>>           network sync : yes
>>           usb          : yes
>>           oaf          : no
>>           gob          : yes
>>           pilot-link   : 0.11.4
>>
>> 5.)I attempted to compile gnome-pilot but always run into these errors:
>>
>> gpilotd.c: In function `do_sync':
>> gpilotd.c:454: warning: implicit declaration of function `gethostname'
>> manager.c:380:25: warning: pasting ""gpilotd: "" and ""Base %s is to be
>> ignored by sync"" does not give a valid preprocessing token
>> queue_io.c:324:9: warning: pasting ""gpilotd: "" and ""assigned handle num
>> %u"" does not give a valid preprocessing token
>> queue_io.c:368:9: warning: pasting ""gpilotd: "" and
>> ""gpc_queue_purge_request()"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:218:25: warning: pasting ""gpilotd: "" and ""unable to
>> resolve IOR for client"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:317:9: warning: pasting ""gpilotd: "" and ""corba:
>> request_install(pilot_name=%s (%d),filename=%s,survival=%d,timeout=%d)"" 
does
>> not give a valid preprocessing token
>> orbit_daemon_glue.c:372:9: warning: pasting ""gpilotd: "" and ""corba:
>> request_restore(pilot_name=%s (%d), directory=%s,survival=%d,timeout=%d)""
>> does not give a valid preprocessing token
>> orbit_daemon_glue.c:426:9: warning: pasting ""gpilotd: "" and ""corba:
>> request_conduit(pilot=%s (%d), conduit=%s)"" does not give a valid
>> preprocessing token
>> orbit_daemon_glue.c:486:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_user_info(cradle=%s,survival=%d,timeout=%d)"" does not give a valid
>> preprocessing token
>> orbit_daemon_glue.c:513:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_system_info(cradle=%s,survival=%d,timeout=%d)"" does not give a valid
>> preprocessing token
>> orbit_daemon_glue.c:542:9: warning: pasting ""gpilotd: "" and ""corba:
>> set_user_info(cradle=%s,survival=%d,timeout=%d"" does not give a valid
>> preprocessing token
>> orbit_daemon_glue.c:544:9: warning: pasting ""gpilotd: "" and ""corba:
>>       device = %s,"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:545:9: warning: pasting ""gpilotd: "" and ""corba:
>>       user_id = %d,"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:546:9: warning: pasting ""gpilotd: "" and ""corba:
>>       user    = %s)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:621:25: warning: pasting ""gpilotd: "" and ""*** Client
>> appears to be disconnected..."" does not give a valid preprocessing token
>> orbit_daemon_glue.c:624:25: warning: pasting ""gpilotd: "" and ""Client 
seems
>> ok"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:628:25: warning: pasting ""gpilotd: "" and ""**** 
Client
>> appears to be disconnected..."" does not give a valid preprocessing token
>> orbit_daemon_glue.c:632:25: warning: pasting ""gpilotd: "" and ""Client 
seems
>> ok"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:639:9: warning: pasting ""gpilotd: "" and
>> ""monitor_on(pilot_name=\"%s\",client_id = %.20s...)"" does not give a 
valid
>> preprocessing token
>> orbit_daemon_glue.c:695:9: warning: pasting ""gpilotd: "" and ""removing
>> monitor on %s for %.10s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:784:25: warning: pasting ""gpilotd: "" and ""Could not
>> find any link for %s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:786:33: warning: pasting ""gpilotd: "" and ""pilots 
slist
>> dump: %s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:792:17: warning: pasting ""gpilotd: "" and ""couldn't 
find
>> any monitor for %.10s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:812:9: warning: pasting ""gpilotd: "" and
>> ""monitor_off(pilot_name=\"%.10s\", client_id = %.20s...)"" does not give a
>> valid preprocessing token
>> orbit_daemon_glue.c:910:17: warning: pasting ""gpilotd: "" and ""corba:
>> notify_on(event_type=%s,callback=%.20s...)"" does not give a valid
>> preprocessing token
>> orbit_daemon_glue.c:959:17: warning: pasting ""gpilotd: "" and ""corba:
>> notify_off(event_type=%s,callback=%.20s...)"" does not give a valid
>> preprocessing token
>> orbit_daemon_glue.c:985:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_users()"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1006:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_cradles(...)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1031:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_pilots(...)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1056:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_pilot_ids(...)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1082:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_pilots_by_name(%s)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1088:17: warning: pasting ""gpilotd: "" and
>> ""g_list_length(orb_context->gpilotd_context->pilots) = %d"" does not give 
a
>> valid preprocessing token
>> orbit_daemon_glue.c:1096:33: warning: pasting ""gpilotd: "" and ""match on
>> %s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1101:25: warning: pasting ""gpilotd: "" and ""no 
matches
>> on %s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1131:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_pilots_by_login(%s)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1149:17: warning: pasting ""gpilotd: "" and ""no 
realname
>> for %s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1166:2: warning: #warning
>> gpilotd_corba_get_user_name_by_pilot not implemented
>> orbit_daemon_glue.c:1168:9: warning: pasting ""gpilotd: "" and ""corba: 
FIXME
>> %s:%d get_user_name_by_pilot"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1180:2: warning: #warning
>> gpilotd_corba_get_user_login_by_pilot not implemented
>> orbit_daemon_glue.c:1182:9: warning: pasting ""gpilotd: "" and ""corba: 
FIXME
>> %s:%d get_user_login_by_pilot"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1193:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_pilot_base_dir(id=%s)"" does not give a valid preprocessing
>> token
>> orbit_daemon_glue.c:1202:33: warning: pasting ""gpilotd: "" and ""match on
>> %s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1210:17: warning: pasting ""gpilotd: "" and ""no 
matches
>> on %s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1220:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_user_pilot_id_from_name"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1231:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_pilot_name_from_id(id=%d)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1248:9: warning: pasting ""gpilotd: "" and ""corba:
>> get_databases_from_cache(...)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1423:17: warning: pasting ""gpilotd: "" and ""Client
>> appears to be disconnected..."" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1489:25: warning: pasting ""gpilotd: "" and ""Client
>> appears to be disconnected..."" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1526:9: warning: pasting ""gpilotd: "" and ""corba:
>> orbed_notify_user, notifications->connect.size = %d, id = %s"" does not 
give a
>> valid preprocessing token
>> orbit_daemon_glue.c:1558:9: warning: pasting ""gpilotd: "" and ""corba:
>> orbed_notify_user, notifications->disconnect.size = %d, id = %s"" does not
>> give a valid preprocessing token
>> orbit_daemon_glue.c:1581:9: warning: pasting ""gpilotd: "" and
>> ""orbed_notify_completion(...)"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1588:17: warning: pasting ""gpilotd: "" and ""%s: no
>> client_id in request"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1592:9: warning: pasting ""gpilotd: "" and ""%s: 
client_id
>> = %.20s"" does not give a valid preprocessing token
>> orbit_daemon_glue.c:1603:17: warning: pasting ""gpilotd: "" and ""unable to
>> resolve object for IOR"" does not give a valid preprocessing token
>> ./.libs/libgpilotdconduit.so: undefined reference to `sync_CopyToPilot'
>> ./.libs/libgpilotdconduit.so: undefined reference to `sync_Synchronize'
>> ./.libs/libgpilotdconduit.so: undefined reference to `sync_CopyFromPilot'
>> ./.libs/libgpilotdconduit.so: undefined reference to `sync_MergeToPilot'
>> ./.libs/libgpilotdconduit.so: undefined reference to `sync_MergeFromPilot'
>> collect2: ld returned 1 exit status
>> make[2]: *** [gpilotd] Error 1
>> make[1]: *** [all-recursive] Error 1
>> make: *** [all-recursive-am] Error 2
>>
>>
>> Any help you can give me is appreciated, I think the problem must be that
>> there is an old library or pkg that I am linking against, but i have 
scoured
>> my system high and low for anything palm related and I can't find anything
>> that I missed.
>>
>> thanks,
>> Joe
>>
>>
>> _______________________________________________
>> gnome-pilot-list mailing list
>> gnome-pilot-list gnome org
>> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list
>
>--
>Pavel Hlavnicka
>Ginger Alliance
>www.gingerall.com
>
>_______________________________________________
>gnome-pilot-list mailing list
>gnome-pilot-list gnome org
>http://mail.gnome.org/mailman/listinfo/gnome-pilot-list