Re: Gnome Pilot FTP locations

[Jack Coates <jack monkeynoodle org>]

On Thu, 2002-09-19 at 07:43, JP Rosevear wrote:
> On Thu, 2002-09-19 at 10:17, Jack Coates wrote:
> > On Thu, 2002-09-19 at 02:21, Frederic Crozat wrote:
> > > Le jeu 19/09/2002 à 04:02, Jack Coates a écrit :
> > > > Hi,
> > > > 
> > > > These and pilot-link 0.11.4 compiled and installed without a hitch on my
> > > > Linux Mandrake 8.2 system (VIA 686A chipset). However, they still cannot
> > > > talk to my Sony Clie 610C over USB, using /dev/usb/tts/0 or 1.
> > > > Pilot-xfer works on either port with no issues.
> 
> What does /proc/bus/usb/devices contain after you press the Hot Sync
> button?
> 

[jack felix jack]$ cat /proc/bus/usb/devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI-alt Root Hub
S:  SerialNumber=a800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI-alt Root Hub
S:  SerialNumber=a400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=1904 Rev= 1.00
S:  Manufacturer=Hewlett-Packard
S:  Product=DeskJet 3820
S:  SerialNumber=CN25G1D0GS18
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 19 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=054c ProdID=0066 Rev= 1.00
S:  Manufacturer=Palm, Inc.
S:  Product=Palm Handheld
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
E:  Ad=81(I) Atr=02(Bulk) MxPS=  16 Ivl=  0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  16 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
[jack felix jack]$ 


huh -- that's funny. Doesn't normally say Palm, Inc. Here's the syslog
output:
Sep 19 08:20:52 felix kernel: hub.c: USB new device connect on bus1/2,
assigned device number 19
Sep 19 08:20:52 felix kernel: usbserial.c: Sony Clié 4.0 converter
detected
Sep 19 08:20:52 felix kernel: visor.c: Sony Clié 4.0: Number of ports: 2
Sep 19 08:20:52 felix kernel: visor.c: Sony Clié 4.0: port 1, is for
Generic use and is bound to ttyUSB0
Sep 19 08:20:52 felix kernel: visor.c: Sony Clié 4.0: port 2, is for
HotSync use and is bound to ttyUSB1
Sep 19 08:20:52 felix kernel: visor.c: visor_startup - error getting
first unknown palm command
Sep 19 08:20:52 felix kernel: visor.c: visor_startup - error getting
second unknown palm command
Sep 19 08:20:52 felix kernel: usbserial.c: Sony Clié 4.0 converter now
attached to ttyUSB0 (or usb/tts/0 for devfs)
Sep 19 08:20:52 felix kernel: usbserial.c: Sony Clié 4.0 converter now
attached to ttyUSB1 (or usb/tts/1 for devfs)
Sep 19 08:20:52 felix /etc/hotplug/usb.agent: Setup visor for USB
product 54c/66/100
Sep 19 08:20:52 felix /etc/hotplug/usb.agent: missing kernel or user
mode driver visor 
Sep 19 08:21:52 felix kernel: usb.c: USB disconnect on device 19
Sep 19 08:21:52 felix kernel: usbserial.c: Sony Clié 4.0 converter now
disconnected from ttyUSB0
Sep 19 08:21:52 felix kernel: usbserial.c: Sony Clié 4.0 converter now
disconnected from ttyUSB1

-- 
Jack Coates
Monkeynoodle: A Scientific Venture...