Re: Help! - CLIE NR70 and Evolution - Completely stuck!

["David A. Desrosiers" <hacker gnu-designs com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


> in case anyone doesn't want to re-compile the kernel, this version of
> visor.o works with the CLIE and the standard Redhat 7.3 kernel:
>
>   http://www.appenzeller.net/~appenz/visor.o
>
> Simply copy into  /lib/modules/2.4.18-3/kernel/drivers/usb/serial/ and
> add "insmod visor" somewhere in rc.d (eg. in rc.local).

	Or just use the visor.c/visor.h files, put them into
	$KERNEL_SRC_DIR/drivers/usb/serial, then execute:

	make modules SUBDIRS=drivers/usb/serial

	..and then:

	make modules_install SUBDIRS=drivers/usb/serial

> 2) pilot-link 10.99
>
> Compiles and installs without problems. Backing up the CLIE with "xfer
> -b .Clie" works perfectly but speed is somewhat slow (about 30 kBit/s).
> PILOTRATE seems to have no effect whatsoever on the transfer speed.

	pilot-xfer -p usb:/dev/ttyUSB{0|1} -b foo # choose your port
		      ^^^ note this change

> It also reports the pilot-link version as ".." but this seems to be fine.

	Then something is wrong. It should always report the 0.10.99 version
of pilot-link when you configure gnome-pilot. What was your --prefix when
you built pilot-link?

> 4) Evolution
>
> Nothing works. It attempts to start gpilot-control-applet which aborts.

	Did you also recompile evolution against the newly-compiled
gnome-pilot? That's a necessary step, after you build gnome-pilot against
the newly-compiled (and detected) pilot-link.



d.

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE9A0xukRQERnB1rkoRAjBIAKDcoEaGtUBEq2AjuHgeYjxm4GrsbwCfdFz0
O8SYcEV5/6RJhUUTjmBCiro=
=xpBW
-----END PGP SIGNATURE-----