RE: configuration problem

[Ian Stewart VerizonWireless com]

Also, if you're using a USB cradle, make sure you read the USB-Serial README
in the kernel documentation (/usr/src/linux/Documentation/usb/usbserial.txt
on most systems).


Ian

> -----Original Message-----
> From: James Smith [mailto:j smith vapourtech com]
> Sent: Friday, November 23, 2001 5:33 AM
> To: gnome-pilot-list gnome org
> Subject: Re: configuration problem
> 
> 
> Hi,
> 
> On Fri, 2001-11-23 at 10:15, Jean-Francois LECOMTE wrote:
> > I've got the following trouble. In my gnome control center 
> i did't have
> > access to the Palm Conduits options. So i can't enable any 
> conduits...
> 
> There were a few messages on this a while ago - if it's the 
> same thing,
> I would guess that you're running Ximian's gnome-pilot packages, in
> which case you have to install the new control centre (in the ximian
> preview channel in red carpet) in order to see the conduit settings.
> 
> Hope this helps,
> 
> cheers,
> -- 
> James Smith - Vapour Technology - james vapourtech com
> www: http://www.vapourtech.com/          ICQ: 53372434
> PGP: B42F 9ACD D166 018C 57F8 8698 098E FAA2 C03B C9ED
> ======================================================
> "There's no explaining the things that might happen;
>  there's now a new home for technology in fashion."
>         - The Clint Boon Experience
> ======================================================
>