Re: Problems with palm500 installation

[JP Rosevear <jpr ximian com>]

On Mon, 2001-12-03 at 16:26, Jochen Wargulski wrote:
> Dear List,
> 
> I try to install my palm500 with the USB port. So I use the gnome-link
> to install ist but it do not work. 
> I read the Mailinglist carefully but do not find the right answer. When
> I start the hotsync then I get the follwoing message out of
> /var/log/messages

> So I think the device where found but the Config Tool "Gnome-link" hang. 
> I use the /dev/ttyUSB1 port and have Suse 7.3 with ximian1.4 for 7.2 but
> have compile all packages for pilot for 7.3
> Can anybody tell me what I have to change.
> If have to create a new device like /dev/pilot with mknod .... and use a
> sym link.

The m500 series is not currently supported by pilot-link because of
protocol changes.  I've been working on it and have basic support going
in pilot-link cvs, protocol-rewrite-branch.

-JP
-- 
--
=======================================================================
JP Rosevear				jpr ximian com
Ximian Inc.				http://www.ximian.com