Re: Having a lot of trouble using the new gnome-pilot, pilot-link

[Ralph Thomas <ralpht freeola com>]

Hi there,
  I had the same trouble when I built with OAF support. I found that if
I ran gpilotd in a terminal, it complained about authentication errors.
It worked fine without oaf, though, and Evolution seems fairly happy to
sync with it now. Does anyone know if this has been fixed in the CVS
version?

Best regards,
Ralph Thomas.

On 04 Aug 2001 23:29:04 -0600, Dan Hensley wrote:
> I downloaded the latest releases of these packages (gnome-pilot 0.1.61,
> gnome-pilot-conduits-0.6, pilot-link 0.9.6), and I've been having
> nothing but trouble since I started.
> 
> The first problem was that gnome-pilot did not compile.  There were
> several header files that pointed either to the wrong prefix to include
> other header files, or didn't have the correct directory listed.
> Basically several header files were mixed up between gpilotd/ and
> libgpilotdCM.  I don't remember what was what, but I had to edit several
> header files to get things to compile.
> 
> The next round of fun began when I tried to configure my Pilot (Palm
> IIIe on a serial port).  Basically, the druid did not work at all.  If
> gpilotd was running, the control center panel did not show anything.
> The only way to get the conduits or the pilot configure window to show
> was to manually kill gpilotd.  And I could not get it to retrieve my
> Pilot settings.  I had to go through several steps of watching gpilotd
> output to determine my ID #, etc.  Basically for every step along the
> way, I have to manually kill gpilotd because it blocks the next dialog
> from appearing.
> 
> Finally, when I got past all that, I tried setting my conduits.  The
> EAddress conduit gave me an error dialog about not being able to
> instantiate it when I tried to enable it.  And when I tried to sync my
> Pilot, gpilotd segfaulted right after completing the calendar conduit
> sync.  When I try to enable the MemoFile conduit, it crashes with the
> backtrace shown below.  I haven't tried any of the other ones yet.
> 
> Are any of these problems common/known issues?  I'd like to start
> testing out my Pilot with Evolution (I was able to compile Evolution
> with these releases, to my surprise).  However, configuring a Palm pilot
> has always been problematic (I tried going through this about a year ago
> on my old machine, but I don't remember having this much trouble).  What
> can I do to either make it better on my machine or give feedback so it
> works?
> 
> One final question is, where is bugzilla for gnome-pilot?  It doesn't
> appear to be at bugzilla.eazel.com, as mentioned in the README.
> 
> Thanks,
> Dan
> 
> P.S.  There's a grammar error in the one-line help when you select Pilot
> Link in control-center.  It should read
> "Configure the link between the user's Pilot and the computer."
> 
> -------------------------------------
> [New Thread 1024 (LWP 7322)]
> 0x407f1689 in wait4 () from /lib/libc.so.6
> #0  0x407f1689 in wait4 () from /lib/libc.so.6
> #1  0x408626ec in __check_rhosts_file () from /lib/libc.so.6
> #2  0x40403aa6 in waitpid (pid=7423, stat_loc=0xbfffe4ec, options=0)
>     at wrapsyscall.c:172
> #3  0x402d6bf6 in gnome_segv_handle (signum=11) at gnome-init.c:659
> #4  0x4040147b in pthread_sighandler (signo=11, ctx=
>       {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds =
> 43, __dsh = 0, edi = 3221219908, esi = 1, ebp = 3221219848, esp =
> 3221219468, ebx = 1080496792, edx = 1, ecx = 1, eax = 1, trapno = 14,
> err = 4, eip = 1081856831, cs = 35, __csh = 0, eflags = 2163202,
> esp_at_signal = 3221219468, ss = 43, __ssh = 0, fpstate = 0xbfffe610,
> oldmask = 2147483648, cr2 = 1}) at signals.c:97
> #5  0x40766128 in killpg () from /lib/libc.so.6
> #6  0x4056703e in gtk_args_collect (object_type=58901, 
>     arg_info_hash_table=0x805ec48, arg_list_p=0xbfffeab4, 
>     info_list_p=0xbfffeab8, 
>     first_arg_name=0x40041d80 "GnomePilotConduitStandard::db_name", 
>     var_args=0xbfffead8) at gtkarg.c:267
> #7  0x405ea273 in gtk_object_args_collect (object_type=58901, 
>     arg_list_p=0xbfffeab4, info_list_p=0xbfffeab8, 
>     first_arg_name=0x40041d80 "GnomePilotConduitStandard::db_name", 
>     var_args=0xbfffead8) at gtkobject.c:986
> #8  0x405e934d in gtk_object_new (object_type=58901, 
>     first_arg_name=0x40041d80 "GnomePilotConduitStandard::db_name")
>     at gtkobject.c:584
> #9  0x40038abd in gnome_pilot_conduit_standard_abs_new (
>     db_name=0x408ac364 "MemoDB", creator_id=1835363695)
>     at gnome-pilot-conduit-standard-abs.c:127
> #10 0x408ab3a2 in conduit_get_gpilot_conduit (pilotId=6786)
>     at memo_file_conduit.c:1314
> #11 0x4004925f in gnome_pilot_conduit_management_instantiate_conduit (
>     self=0x80a5100, pilot=0x80965a8, instance=0x80a5034)
>     at gnome-pilot-conduit-management.gob:720
> #12 0x0804f559 in gpcc_conduits_settings (widget=0x80a0d90, 
>     user_data=0x80964f0) at gnome-pilot-conduitcap.c:557
> #13 0x0804f474 in gpcc_conduits_enable (widget=0x80a0d90,
> user_data=0x80964f0)
>     at gnome-pilot-conduitcap.c:518
> #14 0x405d5d21 in gtk_marshal_NONE__NONE (object=0x80a0d90, 
>     func=0x804f3c0 <gpcc_conduits_enable>, func_data=0x80964f0, 
>     args=0xbfffecc0) at gtkmarshal.c:312
> #15 0x40608946 in gtk_handlers_run (handlers=0x8067a48,
> signal=0xbfffec60, 
>     object=0x80a0d90, params=0xbfffecc0, after=0) at gtksignal.c:1917
> #16 0x40607ca6 in gtk_signal_real_emit (object=0x80a0d90, signal_id=68, 
>     params=0xbfffecc0) at gtksignal.c:1477
> #17 0x40605ae0 in gtk_signal_emit (object=0x80a0d90, signal_id=68)
>     at gtksignal.c:552
> #18 0x4056e9dc in gtk_button_clicked (button=0x80a0d90) at
> gtkbutton.c:336
> #19 0x4057012e in gtk_real_button_released (button=0x80a0d90)
>     at gtkbutton.c:861
> #20 0x405d5d21 in gtk_marshal_NONE__NONE (object=0x80a0d90, 
>     func=0x40570080 <gtk_real_button_released>, func_data=0x0,
> args=0xbffff050)
>     at gtkmarshal.c:312
> #21 0x40607b32 in gtk_signal_real_emit (object=0x80a0d90, signal_id=67, 
>     params=0xbffff050) at gtksignal.c:1440
> #22 0x40605ae0 in gtk_signal_emit (object=0x80a0d90, signal_id=67)
>     at gtksignal.c:552
> #23 0x4056e90c in gtk_button_released (button=0x80a0d90) at
> gtkbutton.c:327
> #24 0x4056fa37 in gtk_button_button_release (widget=0x80a0d90,
> event=0x80e2af8)
>     at gtkbutton.c:721
> #25 0x405d5a2b in gtk_marshal_BOOL__POINTER (object=0x80a0d90, 
>     func=0x4056f960 <gtk_button_button_release>, func_data=0x0, 
>     args=0xbffff3f0) at gtkmarshal.c:28
> #26 0x40607ce9 in gtk_signal_real_emit (object=0x80a0d90, signal_id=27, 
>     params=0xbffff3f0) at gtksignal.c:1492
> #27 0x40605ae0 in gtk_signal_emit (object=0x80a0d90, signal_id=27)
>     at gtksignal.c:552
> #28 0x4063fff9 in gtk_widget_event (widget=0x80a0d90, event=0x80e2af8)
>     at gtkwidget.c:2864
> #29 0x405d5984 in gtk_propagate_event (widget=0x80a0d90,
> event=0x80e2af8)
>     at gtkmain.c:1378
> #30 0x405d49f5 in gtk_main_do_event (event=0x80e2af8) at gtkmain.c:818
> #31 0x4068bb4f in gdk_event_dispatch (source_data=0x0, 
>     current_time=0xbffff7c0, user_data=0x0) at gdkevents.c:2139
> #32 0x406bd390 in g_main_dispatch (dispatch_time=0xbffff7c0) at
> gmain.c:656
> #33 0x406bd96f in g_main_iterate (block=1, dispatch=1) at gmain.c:877
> #34 0x406bdb2b in g_main_run (loop=0x80d2368) at gmain.c:935
> #35 0x405d42b3 in gtk_main () at gtkmain.c:524
> #36 0x400507ed in capplet_corba_gtk_main () at capplet-widget-libs.c:140
> #37 0x40050116 in capplet_gtk_main () at capplet-widget.c:208
> #38 0x0804d2f1 in main (argc=4, argv=0xbffff96c)
>     at gpilotd-control-applet.c:173
> #39 0x407551f0 in __libc_start_main () from /lib/libc.so.6
> #0  0x407f1689 in wait4 () from /lib/libc.so.6
> No symbol table info available.
> #1  0x408626ec in __check_rhosts_file () from /lib/libc.so.6
> No symbol table info available.
> #2  0x40403aa6 in waitpid (pid=7423, stat_loc=0xbfffe4ec, options=0)
>     at wrapsyscall.c:172
> 	in wrapsyscall.c
> stat_loc = (int *) 0xbfffe4ec
> options = 0
> result = 0
> oldtype = 0
> #3  0x402d6bf6 in gnome_segv_handle (signum=11) at gnome-init.c:659
> 659			eret = waitpid(pid, &estatus, 0);
> estatus = 1073792285
> in_segv.5 = 1
> pid = 0
> #4  0x4040147b in pthread_sighandler (signo=11, ctx=
>       {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds =
> 43, __dsh = 0, edi = 3221219908, esi = 1, ebp = 3221219848, esp =
> 3221219468, ebx = 1080496792, edx = 1, ecx = 1, eax = 1, trapno = 14,
> err = 4, eip = 1081856831, cs = 35, __csh = 0, eflags = 2163202,
> esp_at_signal = 3221219468, ss = 43, __ssh = 0, fpstate = 0xbfffe610,
> oldmask = 2147483648, cr2 = 1}) at signals.c:97
> 	in signals.c
> self = 0x4040a940
> in_sighandler = 0x0
> self = 0x4040a940
> in_sighandler = 0x0
> #5  0x40766128 in killpg () from /lib/libc.so.6
> No symbol table info available.
> #6  0x4056703e in gtk_args_collect (object_type=58901, 
>     arg_info_hash_table=0x805ec48, arg_list_p=0xbfffeab4, 
>     info_list_p=0xbfffeab8, 
>     first_arg_name=0x40041d80 "GnomePilotConduitStandard::db_name", 
>     var_args=0xbfffead8) at gtkarg.c:267
> 	in gtkarg.c
> info = (GtkArgInfo *) 0x0
> error = (gchar *) 0x0
> var_args = 0x1
> arg_list = (GSList *) 0x80657e8
> info_list = (GSList *) 0x80656c8
> arg_name = (gchar *) 0x1 <Address 0x1 out of bounds>
> #7  0x405ea273 in gtk_object_args_collect (object_type=58901, 
>     arg_list_p=0xbfffeab4, info_list_p=0xbfffeab8, 
>     first_arg_name=0x40041d80 "GnomePilotConduitStandard::db_name", 
>     var_args=0xbfffead8) at gtkobject.c:986
> 	in gtkobject.c
> No locals.
> 
> 
> 
> 
> _______________________________________________
> gnome-pilot-list mailing list
> gnome-pilot-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list
>