Re: SSH on gnome-terminal 1.0.41 doesn't work

[Matthijs Melchior <mmelchio xs4all nl>]

Kevin Atkinson wrote:
> 
> Matthijs Melchior wrote:
> >
....
> >
> >         I just had a simmilar experience on Solaris7 with CDE1.3, and
> > there it turned out to be a problem with the terminal speed setting
> > in the environment where I start ssh.  If the speed is 0 there, you
> > get a HUP signal when sshd uses that to set the tty properties for your
> > new shell.  The last [sending HUP on `stty 0'] is according to standard
> > unix behaviour, the first [tty speed being 0] is not...
> >
....
> 
> Maybe.  Here is what stty -a gives:
> 
> [kevina@kevins-linux kevina]$ stty -a
> speed 9600 baud; rows 42; columns 80; line = 0;
> intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
> eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
> lnext = ^V; flush = ^O; min = 1; time = 0;
> -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts
> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff
> -iuclc -ixany -imaxbel
> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
> isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
> echoctl echoke
> 
> Do you notice any problems?
> 
....

	NO, this looks OK.  In my case the speed was 0.  So this is a dead
end....

-- Regards,
----------------------------------------------------------------  -o)
Matthijs Melchior                                       Maarssen  /\\
mmelchio@xs4all.nl          +31 346 570616           Netherlands _\_v
---------------------------------------------------------------- ----