[gnome-db] libgda autogen.sh ERROR
- From: Jaime Anguiano Olarra <jaime gcubo org>
- To: Rodrigo Moya <rodrigo gnome-db org>
- Cc: GDA <gnome-db-list gnome org>
- Subject: [gnome-db] libgda autogen.sh ERROR
- Date: 28 Aug 2001 18:46:21 +0200
Hi!.
I updated my gettext to the version you recommend me ...39 I have
dowloaded the cvs version of libgda a few minutes ago and tried to run
autogen.sh the result is autogen.sh gives an ERROR in ./configure: line
3106: syntax error near unexpected token `GOB_CHECK(1.0.5)`
./configure: line 306: `GOB_CHECK(1.0.5)`. Then it stops there.
Removing the lines that refer to GOB_CHECK in configure.in and in
configure was enough for me so here I send my version of these files.
I really think that the configure file is not necessary to change it,
but the configure.in.
Love,
Jaime.
AC_INIT(lib/gda-common/gda-common.h)
AM_CONFIG_HEADER(config.h)
AM_INIT_AUTOMAKE(libgda,0.2.91)
AM_MAINTAINER_MODE
AM_ACLOCAL_INCLUDE(macros)
AM_PROG_XML_I18N_TOOLS
dnl
dnl Checks for programs
dnl
AC_ISC_POSIX
AC_PROG_CC
AC_PROG_CXX
AC_STDC_HEADERS
AM_PROG_XML_I18N_TOOLS
AM_PROG_LIBTOOL
dnl
dnl Checks for libraries
dnl
AM_PATH_GLIB(1.2.0,,AC_MSG_ERROR(glib test failed),gthread)
AM_PATH_GTK(1.0.0,,AC_MSG_ERROR(gtk+ test failed))
gda_base_libs="$GLIB_LIBS $GTK_LIBS"
gda_base_cflags="$GLIB_CFLAGS $GTK_CFLAGS"
dnl Check for ORBit
AC_MSG_CHECKING(for ORBit)
if orbit-config --libs > /dev/null 2>&1
then
AC_MSG_RESULT(found)
ORBIT_IDL=`which orbit-idl`
else
AC_MSG_ERROR(not found)
fi
dnl Check for GConf
use_gconf=false
gconfminver="0.9"
AC_MSG_CHECKING(for GConf >= $gconfminver)
if gconf-config --libs gconf > /dev/null 2>&1
then
gconfver=`gconf-config --version | awk 'BEGIN {FS="."}{printf "%d", $1*1000+$2}'`
if test "$gconfver" -ge 9
then
AC_MSG_RESULT(found)
gda_gconf_libs=`gconf-config --libs gconf`
gda_gconf_cflags=`gconf-config --cflags gconf`
use_gconf=true
fi
fi
if test -z $use_gconf
then
AC_MSG_ERROR([
*** GConf $gconfminver or later is necessary in order to build libgda.])
fi
# Bonobo checks
AM_PATH_BONOBO(1.0,,AC_MSG_ERROR(Bonobo >= 1.0 is needed to compile GNOME-DB))
gda_bonobo_cflags=`gnome-config --cflags bonobo`
gda_bonobo_libs=`gnome-config --libs bonobo`
dnl Check for libxml
AC_MSG_CHECKING(for libxml)
if xml-config --libs > /dev/null 2>&1
then
gda_xml_libs=`xml-config --libs`
gda_xml_cflags=`xml-config --cflags`
AC_MSG_RESULT(found)
else
AC_MSG_ERROR(not found)
fi
dnl Check for libxslt
AC_MSG_CHECKING(for libxslt)
if xslt-config --libs > /dev/null 2>&1
then
AC_MSG_RESULT(found)
gda_xslt_libs=`xslt-config --libs`
gda_xslt_cflags=`xslt-config --cflags`
else
AC_MSG_WARN(not found)
fi
dnl ******************************
dnl gtk-doc
dnl ******************************
AC_CHECK_PROG(GTKDOC, gtkdoc-mkdb, true, false)
AM_CONDITIONAL(HAVE_GTK_DOC, $GTKDOC)
AC_SUBST(HAVE_GTK_DOC)
AM_CONDITIONAL(ENABLE_GTK_DOC, $GTKDOC)
dnl
dnl Checks for providers
dnl
dnl Test for ODBC
AC_ARG_WITH(odbc,
[ --with-odbc=<directory> use ODBC libraries in <directory>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
odbcdir=""
AC_MSG_CHECKING(for ODBC files)
for d in $dir /usr /usr/local
do
if test -f $d/lib/libodbc.so
then
AC_MSG_RESULT(found ODBC in $d)
odbclib="-lodbc"
odbcdir=$d
break
fi
if test -f $d/lib/libiodbc.so
then
AC_MSG_RESULT(found iODBC in $d)
odbclib="-liodbc"
odbcdir=$d
break
fi
done
if test x$odbcdir = x
then
AC_MSG_WARN(ODBC backend not used)
else
AC_DEFINE(HAVE_ODBC)
ODBC_CFLAGS="-I${odbcdir}/include"
ODBC_LIBS="-L${odbcdir}/lib ${odbclib}"
fi
])
AM_CONDITIONAL(ODBC, test x$odbcdir != x)
dnl Test for MySQL
AC_ARG_WITH(mysql,
[ --with-mysql=<directory> use mysql backend in <directory>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
mysqldir=""
AC_MSG_CHECKING(for MySQL files)
for d in $dir /usr /usr/local /usr/local/mysql /opt/mysql /opt/packages/mysql
do
if test -f $d/include/mysql/mysql.h
then
mysqldir_suffix=/mysql
else
mysqldir_suffix=
fi
if test -f $d/lib/mysql/libmysqlclient.a -o -f $d/lib/libmysqlclient.so
then
AC_MSG_RESULT(found mysql in $d)
mysqldir=$d
mysqllibdir_suffix=/mysql
break
fi
if test -f $d/lib/libmysqlclient.a -o -f $d/lib/libmysqlclient.so
then
AC_MSG_RESULT(found mysql in $d)
mysqldir=$d
mysqllibdir_suffix=
break
fi
done
if test x$mysqldir = x
then
AC_MSG_WARN(MySQL backend not used)
else
AC_DEFINE(HAVE_MYSQL)
MYSQL_CFLAGS="-I${mysqldir}/include${mysqldir_suffix}"
MYSQL_LIBS="-L${mysqldir}/lib${mysqllibdir_suffix} -lmysqlclient"
if test -f ${mysqldir}/lib${mysqllibdir_suffix}/libmystrings.a
then
MYSQL_LIBS="${MYSQL_LIBS} -lmystrings"
fi
fi
])
AM_CONDITIONAL(MYSQL, test x$mysqldir != x)
dnl Test for PostgreSQL
AC_ARG_WITH(postgres,
[ --with-postgres=<directory> use postgres backend in <directory>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
AC_MSG_CHECKING(for Postgres files)
postgresdir=""
for d in $dir /usr /usr/local/postgres /opt/postgres /opt/packages/postgres /disk/postgres /usr/local/pgsql
do
if test -f $d/lib/libpq.so
then
AC_MSG_RESULT(found Postgres in $d)
postgresdir=$d
break
fi
done
if test x$postgresdir = x
then
AC_MSG_WARN(Postgres backend not used)
else
if test -f ${postgresdir}/include/libpq-fe.h
then
POSTGRES_CFLAGS=-I${postgresdir}/include
elif test -f ${postgresdir}/include/pgsql/libpq-fe.h
then
POSTGRES_CFLAGS=-I${postgresdir}/include/pgsql
elif test -f ${postgresdir}/include/postgresql/libpq-fe.h
then
POSTGRES_CFLAGS=-I${postgresdir}/include/postgresql
else
AC_MSG_WARN(Postgres include files not found, backend not used)
postgresdir=""
fi
POSTGRES_LIBS="-L${postgresdir}/lib -lpq"
AC_DEFINE(HAVE_POSTGRES)
fi
])
AM_CONDITIONAL(POSTGRES, test x$postgresdir != x)
dnl Check for Primebase
AC_ARG_WITH(primebase,
[ --with-primebase=<directory> use primebase sdk in <directory>],[
if test $withval != yes
then
dir=$withval
else
dir="/opt/primebase/sdk"
fi
primebasedir=""
AC_MSG_CHECKING(for PrimeBase SDK >= 4.0 Pre-final)
for d in $dir /opt/primebase /usr/local/primebase
do
if test -e ${d}/lib/libpbvm.so
then
for i in sdk include
do
if test -e ${d}/${i}/pbapi.h
then
primebasedir=${d}
PRIMEBASE_LIBS="-lm -lnsl -L${d}/lib -lpbvm"
PRIMEBASE_CFLAGS="-I${d}/${i}"
AC_DEFINE(HAVE_PRIMEBASE)
break
fi
done
fi
done
if test x$primebasedir != x
then
AC_MSG_RESULT(found PrimeBase SDK in $primebasedir)
else
AC_MSG_RESULT(not found)
fi
])
AM_CONDITIONAL(PRIMEBASE, test x$primebasedir != x)
dnl Test for freetds provider
AC_ARG_WITH(tds,
[ --with-tds=<directory> use freetds library in <directory>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local/freetds"
fi
AC_MSG_CHECKING(for freetds files)
freetdsdir=""
for d in $dir /usr/local/freetds /opt/freetds /opt/packages/freetds /opt/freetds-0.50
do
if test -f $d/include/ctpublic.h
then
AC_MSG_RESULT(found freetds in $d)
freetdsdir=$d
break
fi
done
if test x$freetdsdir = x
then
AC_MSG_WARN(tds backend not used)
else
TDS_CFLAGS=-I${freetdsdir}/include
TDS_LIBS="-L${freetdsdir}/lib -lct"
AC_DEFINE(HAVE_TDS)
fi
])
AM_CONDITIONAL(TDS, test x$freetdsdir != x)
dnl Test for Sybase
AC_ARG_WITH(sybase,
[ --with-sybase=<directory> use Sybase backend in <directory>],[
AC_MSG_CHECKING(for Sybase files)
if test $withval != yes
then
dir=$withval
else
dir="/opt2/sybase"
fi
sybasedir=""
for d in $dir /usr/local/sybase /opt/sybase /opt/packages/sybase
do
if test -f "$d/include/ctpublic.h"
then
AC_MSG_RESULT(found Sybase in $d)
sybasedir="$d"
break
fi
for v in 11.9.2 11.0.3.3
do
if test -f "$d-$v/include/ctpublic.h"
then
AC_MSG_RESULT(found Sybase in $d-$v)
sybasedir="$d-$v"
break
fi
done
done
if test x$sybasedir = x
then
AC_MSG_WARN(Sybase backend not used)
else
SYBASE_CFLAGS="-I${sybasedir}/include"
SYBASE_LIBS="-lnsl -ldl -lm -L${sybasedir}/lib"
AC_MSG_CHECKING(for Sybase host system type)
AC_MSG_RESULT($host)
case "$host" in
*linux*) sybase_ctlibs="-lct -lcs -lsybtcl -lcomn -lintl"
sybase_blklibs="-lblk ${sybase_ctlibs}"
SYBASE_LIBS="${SYBASE_LIBS} ${sybase_ctlibs} ${sybase_blklibs}"
AC_DEFINE(HAVE_SYBASE)
;;
*) AC_MSG_WARN(this host type is unsupported; sybase backend not used)
sybasedir=""
;;
esac
fi
])
AM_CONDITIONAL(SYBASE, test x$sybasedir != x)
dnl Link gda-sybase-srv against debugable libs
AC_ARG_ENABLE(sybase-debug,
[ --enable-sybase-debug=[no/min/max] no=none, min=debug msgs, max=min and link against sybase devlibs (which are static!).],,enable_sybase_debug=no)
if test "x$sybasedir" != "x"
then
AC_MSG_CHECKING(for Sybase debugging level)
if test "x$enable_sybase_debug" = "xmax"
then
AC_DEFINE(SYBASE_DEBUG)
if test -f $sybasedir/devlib/libct.a
then
AC_MSG_RESULT(max)
AC_MSG_WARN(erase passwords in bug-buddy debug output before sending bugreports)
SYBASE_LIBS=${sybasedir}/devlib
else
AC_MSG_RESULT(min)
AC_MSG_WARN(no debug libraries found, using --enable-sybase-debug=min)
enable_sybase_debug=min
fi
else
AC_MSG_RESULT($enable_sybase_debug)
if test "x$enable_sybase_debug" != "x"
then
if test "x$enable_sybase_debug" != "xno"
then
AC_DEFINE(SYBASE_DEBUG)
fi
fi
fi
else
if test "x$enable_sybase_debug" != "xno"
then
AC_MSG_WARN(you applied sybase debugging options, but sybase has not been found or is unsupported, disabling debug options)
fi
enable_sybase_debug=no
fi
dnl test for LDAP
AC_ARG_WITH(ldap,
[ --with-ldap=<directory> use LDAP backend in <directory>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
AC_MSG_CHECKING(for LDAP files)
ldapdir=""
for d in $dir /usr /usr/local/ldap /opt/ldap /opt/packages/ldap /usr/local/openldap /opt/openldap /opt/packages/openldap
do
if test -f $d/lib/libldap.so
then
AC_MSG_RESULT(found LDAP in $d)
LDAP_LIBS="-lldap -llber"
ldapdir=$d
break
fi
if test -f $d/lib/libopenldap.so
then
AC_MSG_RESULT(found OpenLDAP in $d)
LDAP_LIBS="-lopenldap -llber-openldap"
ldapdir=$d
break
fi
done
if test x$ldapdir = x
then
AC_MSG_WARN(LDAP backend not used)
else
if test -f ${ldapdir}/include/ldap.h
then
LDAP_CFLAGS="-I${ldapdir}/include"
elif test -f ${ldapdir}/include/openldap/ldap.h
then
LDAP_CFLAGS="-I${ldapdir}/include/openldap"
else
AC_MSG_WARN(LDAP include files not found. backend not used)
ldapdir=""
fi
AC_DEFINE(HAVE_LDAP)
LDAP_LIBS="-L${ldapdir}/lib ${LDAP_LIBS}"
fi
])
AM_CONDITIONAL(LDAP, test x$ldapdir != x)
dnl test for ORACLE
AC_ARG_WITH(oracle,
[ --with-oracle=<directory> use ORACLE backend in <directoty>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
AC_MSG_CHECKING(for ORACLE installation)
for d in $dir $ORACLE_HOME /opt/oracle
do
if test -f $d/lib/libclntsh.so
then
AC_MSG_RESULT(found ORACLE in $d)
oracledir=$d
break
fi
done
if test x$oracledir = x
then
AC_MSG_WARN(ORACLE backend not used)
else
AC_DEFINE(HAVE_ORACLE)
ORACLE_CFLAGS="-I${ORACLE_HOME}/rdbms/demo -I${ORACLE_HOME}/rdbms/public -I${ORACLE_HOME}/plsql/public -I${ORACLE_HOME}/network/public"
ORACLE_LIBS="-L${ORACLE_HOME}/lib -lm -ldl -lserver8 -lclient8 \
-lgeneric8 -lcommon8 -lvsn8 -lagent8 -lmm -lclntst8 \
-lslax8 -lsql8 -lcore8 -lnls8 -lplc8 -lplp8 -lpls8 \
-lpsa8"
fi
])
AM_CONDITIONAL(ORACLE, test x$oracledir != x)
dnl test for INTERBASE
AC_ARG_WITH(interbase,
[ --with-interbase=<directory> use INTERBASE backend in <directoty>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
AC_MSG_CHECKING(for INTERBASE installation)
for d in $dir /usr/local/interbase /usr/local /usr /opt/interbase
do
if test -f $d/include/ibase.h
then
AC_MSG_RESULT(found INTERBASE in $d)
interbasedir=$d
break
fi
done
if test x$interbasedir = x
then
AC_MSG_WARN(INTERBASE backend not used)
else
AC_DEFINE(HAVE_INTERBASE)
INTERBASE_CFLAGS="-I${interbasedir}/include"
INTERBASE_LIBS="-L${interbasedir}/lib -lgds -ldl -lcrypt"
fi
])
AM_CONDITIONAL(INTERBASE, test x$interbasedir != x)
dnl test for MDB libraries
AC_ARG_WITH(mdb,
[ --with-mdb=<directory> use MDB libraries in <directoty>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
AC_MSG_CHECKING(for MDB installation)
for d in $dir /usr/local/mdbtools /usr/local /usr /opt/mdbtools
do
if test -f $d/include/mdbtools.h
then
AC_MSG_RESULT(found MDB in $d)
mdbdir=$d
break
fi
done
if test x$mdbdir = x
then
AC_MSG_WARN(MDB libraries not used)
else
AC_DEFINE(HAVE_MDB)
MDB_CFLAGS="-I${mdbdir}/include"
MDB_LIBS="-L{mdbdir}/lib -lmdb"
fi
])
AM_CONDITIONAL(MDB, test x$mdbdir != x)
dnl test for Camel
AC_ARG_WITH(camel,
[ --with-camel=<directory> use Mail backend in <directory>],[
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
AC_MSG_CHECKING(for Camel files)
cameldir=""
for d in $dir /usr /usr/local
do
if test -f $d/bin/evolution
then
AC_MSG_RESULT(found Camel in $d)
cameldir=$d
break
fi
done
if test x$cameldir = x
then
AC_MSG_WARN(Mail backend not used)
else
CAMEL_CFLAGS="-I$d/include"
CAMEL_LIBS="-L${cameldir}/lib -lcamel"
AC_DEFINE(HAVE_CAMEL)
fi
])
AM_CONDITIONAL(MAIL, test x$cameldir != x)
dnl
dnl Translations
dnl
ALL_LINGUAS="ca da de el es fi fr ga gl hu it ja nl nn no pl pt_BR ru sk sl sv uk"
AM_GNOME_GETTEXT
dnl
dnl Variables
dnl
GDA_CLIENT_LIBS="$gda_base_libs $gda_xml_libs $gda_gconf_libs $gda_bonobo_libs"
GDA_CLIENT_CFLAGS="$gda_base_cflags $gda_xml_cflags $gda_gconf_cflags $gda_bonobo_cflags"
GDA_PROVIDER_LIBS="$gda_base_libs $gda_xml_libs $gda_gconf_libs $gda_bonobo_libs"
GDA_PROVIDER_CFLAGS="$gda_base_cflags $gda_xml_cflags $gda_gconf_cflags $gda_bonobo_cflags"
XML_LIBS="$gda_xslt_libs"
XML_CFLAGS="$gda_xslt_cflags"
IDL_FLAGS=`gnome-config --cflags idl`
AC_SUBST(IDL_FLAGS)
AC_SUBST(GDA_CLIENT_LIBS)
AC_SUBST(GDA_CLIENT_CFLAGS)
AC_SUBST(GDA_PROVIDER_LIBS)
AC_SUBST(GDA_PROVIDER_CFLAGS)
AC_SUBST(ODBC_LIBS)
AC_SUBST(ODBC_CFLAGS)
AC_SUBST(MYSQL_LIBS)
AC_SUBST(MYSQL_CFLAGS)
AC_SUBST(POSTGRES_LIBS)
AC_SUBST(POSTGRES_CFLAGS)
AC_SUBST(PRIMEBASE_LIBS)
AC_SUBST(PRIMEBASE_CFLAGS)
AC_SUBST(TDS_LIBS)
AC_SUBST(TDS_CFLAGS)
AC_SUBST(SYBASE_LIBS)
AC_SUBST(SYBASE_CFLAGS)
AC_SUBST(LDAP_LIBS)
AC_SUBST(LDAP_CFLAGS)
AC_SUBST(ORACLE_LIBS)
AC_SUBST(ORACLE_CFLAGS)
AC_SUBST(INTERBASE_LIBS)
AC_SUBST(INTERBASE_CFLAGS)
AC_SUBST(MDB_LIBS)
AC_SUBST(MDB_CFLAGS)
AC_SUBST(CAMEL_LIBS)
AC_SUBST(CAMEL_CFLAGS)
AC_SUBST(XML_LIBS)
AC_SUBST(XML_CFLAGS)
GDA_oafdir=`oaf-config --prefix`/share/oaf
AC_SUBST(ORBIT_IDL)
AC_SUBST(GDA_oafdir)
AC_OUTPUT([
Makefile
libgda.spec
macros/Makefile
po/Makefile.in
intl/Makefile
idl/Makefile
lib/Makefile
lib/gda-common/Makefile
lib/gda-client/Makefile
lib/gda-server/Makefile
bindings/Makefile
bindings/c++/Makefile
providers/Makefile
providers/gda-default-server/Makefile
providers/gda-odbc-server/Makefile
providers/gda-mysql-server/Makefile
providers/gda-postgres-server/Makefile
providers/gda-primebase-server/Makefile
providers/gda-sybase-server/Makefile
providers/gda-tds-server/Makefile
providers/gda-ldap-server/Makefile
providers/gda-oracle-server/Makefile
providers/gda-interbase-server/Makefile
providers/gda-mdb-server/Makefile
providers/gda-mail-server/Makefile
tools/Makefile
tools/gda-config
tools/gda-buildserver
tools/gda-buildclient
tools/templates/Makefile
testing/Makefile
doc/Makefile
doc/es/Makefile
doc/C/Makefile
doc/C/reference/Makefile
doc/C/reference/libgda-common/Makefile
doc/C/reference/libgda-client/Makefile
doc/pt_BR/Makefile
stamp.h
],[sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile])
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
--enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
ac_help="$ac_help
--enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--with-glib-prefix=PFX Prefix where GLIB is installed (optional)"
ac_help="$ac_help
--with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)"
ac_help="$ac_help
--disable-glibtest Do not try to compile and run a test GLIB program"
ac_help="$ac_help
--with-gtk-prefix=PFX Prefix where GTK is installed (optional)"
ac_help="$ac_help
--with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
ac_help="$ac_help
--disable-gtktest Do not try to compile and run a test GTK program"
ac_help="$ac_help
--with-bonobo-prefix=PFX Prefix where Bonobo is installed (optional)"
ac_help="$ac_help
--with-bonobo-exec-prefix=PFX Exec prefix where Bonobo is installed (optional)"
ac_help="$ac_help
--disable-bonobotest Do not try to compile and run a test Bonobo program"
ac_help="$ac_help
--with-odbc=<directory> use ODBC libraries in <directory>"
ac_help="$ac_help
--with-mysql=<directory> use mysql backend in <directory>"
ac_help="$ac_help
--with-postgres=<directory> use postgres backend in <directory>"
ac_help="$ac_help
--with-primebase=<directory> use primebase sdk in <directory>"
ac_help="$ac_help
--with-tds=<directory> use freetds library in <directory>"
ac_help="$ac_help
--with-sybase=<directory> use Sybase backend in <directory>"
ac_help="$ac_help
--enable-sybase-debug=[no/min/max] no=none, min=debug msgs, max=min and link against sybase devlibs (which are static!)."
ac_help="$ac_help
--with-ldap=<directory> use LDAP backend in <directory>"
ac_help="$ac_help
--with-oracle=<directory> use ORACLE backend in <directoty>"
ac_help="$ac_help
--with-interbase=<directory> use INTERBASE backend in <directoty>"
ac_help="$ac_help
--with-mdb=<directory> use MDB libraries in <directoty>"
ac_help="$ac_help
--with-camel=<directory> use Mail backend in <directory>"
ac_help="$ac_help
--disable-nls do not use Native Language Support"
ac_help="$ac_help
--with-catgets use catgets functions if available"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=lib/gda-common/gda-common.h
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi caip rutgers edu
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:619: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:672: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "$*" != "X $srcdir/configure conftestfile" \
&& test "$*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
{ echo "configure: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
fi
test "$2" = conftestfile
)
then
# Ok.
:
else
{ echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:729: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
all:
@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
eval ac_cv_prog_make_${ac_make}_set=yes
else
eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
echo "$ac_t""yes" 1>&6
SET_MAKE=
else
echo "$ac_t""no" 1>&6
SET_MAKE="MAKE=${MAKE-make}"
fi
PACKAGE=libgda
VERSION=0.2.91
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF
cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:775: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
ACLOCAL=aclocal
echo "$ac_t""found" 1>&6
else
ACLOCAL="$missing_dir/missing aclocal"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:788: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
AUTOCONF=autoconf
echo "$ac_t""found" 1>&6
else
AUTOCONF="$missing_dir/missing autoconf"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:801: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
AUTOMAKE=automake
echo "$ac_t""found" 1>&6
else
AUTOMAKE="$missing_dir/missing automake"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:814: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
AUTOHEADER=autoheader
echo "$ac_t""found" 1>&6
else
AUTOHEADER="$missing_dir/missing autoheader"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:827: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
MAKEINFO=makeinfo
echo "$ac_t""found" 1>&6
else
MAKEINFO="$missing_dir/missing makeinfo"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:841: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
USE_MAINTAINER_MODE=$enableval
else
USE_MAINTAINER_MODE=no
fi
echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
else
MAINTAINER_MODE_TRUE='#'
MAINTAINER_MODE_FALSE=
fi
MAINT=$MAINTAINER_MODE_TRUE
if test x = y; then
INSIDE_GNOME_COMMON_TRUE=
INSIDE_GNOME_COMMON_FALSE='#'
else
INSIDE_GNOME_COMMON_TRUE='#'
INSIDE_GNOME_COMMON_FALSE=
fi
test -n "$ACLOCAL_FLAGS" && ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
for k in macros ; do ACLOCAL="$ACLOCAL -I $k" ; done
XML_I18N_MERGE_OAF_RULE='\%.oaf : \%.oaf.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -o $(top_srcdir)/po $< $*.oaf'
XML_I18N_MERGE_KEYS_RULE='\%.keys : \%.keys.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -k $(top_srcdir)/po $< $*.keys'
XML_I18N_MERGE_DESKTOP_RULE='\%.desktop : \%.desktop.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.desktop'
XML_I18N_MERGE_DIRECTORY_RULE='\%.directory : \%.directory.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.directory'
XML_I18N_MERGE_SOUNDLIST_RULE='\%.soundlist : \%.soundlist.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.soundlist'
XML_I18N_MERGE_PONG_RULE='\%.pong : \%.pong.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -x $(top_srcdir)/po $< $*.pong'
XML_I18N_MERGE_XML_RULE='\%.xml : \%.xml.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -x $(top_srcdir)/po $< $*.xml'
# Always use our own xml-i18n-tools.
XML_I18N_EXTRACT='$(top_builddir)/xml-i18n-extract'
XML_I18N_MERGE='$(top_builddir)/xml-i18n-merge'
XML_I18N_UPDATE='$(top_builddir)/xml-i18n-update'
XML_I18N_MERGE_SOUNDLIST_RULE='\%.soundlist : \%.soundlist.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.soundlist'
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:914: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XML_I18N_TOOLS_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XML_I18N_TOOLS_PERL" in
/*)
ac_cv_path_XML_I18N_TOOLS_PERL="$XML_I18N_TOOLS_PERL" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_XML_I18N_TOOLS_PERL="$XML_I18N_TOOLS_PERL" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_XML_I18N_TOOLS_PERL="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
;;
esac
fi
XML_I18N_TOOLS_PERL="$ac_cv_path_XML_I18N_TOOLS_PERL"
if test -n "$XML_I18N_TOOLS_PERL"; then
echo "$ac_t""$XML_I18N_TOOLS_PERL" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$XML_I18N_TOOLS_PERL"; then
{ echo "configure: error: perl not found; required for xml-i18n-tools" 1>&2; exit 1; }
fi
if test -z "`$XML_I18N_TOOLS_PERL -v | fgrep '5.' 2> /dev/null`"; then
{ echo "configure: error: perl 5.x required for xml-i18n-tools" 1>&2; exit 1; }
fi
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:963: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:993: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
break
fi
done
IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "$@"
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
case "`uname -s`" in
*win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1044: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="cl"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
;;
esac
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1076: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 1087 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:1092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_cross=no
else
ac_cv_prog_cc_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1118: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1123: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
else
GCC=
fi
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1151: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
else
ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
echo "configure:1183: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
echo "$ac_t""yes" 1>&6
ISC=yes # If later tests want to check for ISC.
cat >> confdefs.h <<\EOF
#define _POSIX_SOURCE 1
EOF
if test "$GCC" = yes; then
CC="$CC -posix"
else
CC="$CC -Xp"
fi
else
echo "$ac_t""no" 1>&6
ISC=
fi
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1206: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1236: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
break
fi
done
IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "$@"
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
case "`uname -s`" in
*win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1287: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="cl"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
;;
esac
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1319: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 1330 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:1335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_cross=no
else
ac_cv_prog_cc_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1361: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1366: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
else
GCC=
fi
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1394: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
else
ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1430: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CXX"; then
ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CXX="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CXX="$ac_cv_prog_CXX"
if test -n "$CXX"; then
echo "$ac_t""$CXX" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -n "$CXX" && break
done
test -n "$CXX" || CXX="gcc"
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1462: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
cat > conftest.$ac_ext << EOF
#line 1473 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
if { (eval echo configure:1478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cxx_cross=no
else
ac_cv_prog_cxx_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cxx_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
if test $ac_cv_prog_cxx_works = no; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1504: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:1509: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.C <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1518: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
fi
fi
echo "$ac_t""$ac_cv_prog_gxx" 1>&6
if test $ac_cv_prog_gxx = yes; then
GXX=yes
else
GXX=
fi
ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:1537: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.cc
if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
ac_cv_prog_cxx_g=yes
else
ac_cv_prog_cxx_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
if test "$GXX" = yes; then
CXXFLAGS="-g -O2"
else
CXXFLAGS="-g"
fi
else
if test "$GXX" = yes; then
CXXFLAGS="-O2"
else
CXXFLAGS=
fi
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1569: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# substituted into the Makefile and "${CC-cc}" will confuse make.
CPP="${CC-cc} -E"
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
#line 1584 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1590: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
#line 1601 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1607: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
#line 1618 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1624: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
CPP="$ac_cv_prog_CPP"
else
ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1649: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1654 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1662: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_cv_header_stdc=yes
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1679 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "memchr" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1697 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "free" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 1718 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
if { (eval echo configure:1729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_header_stdc=no
fi
rm -fr conftest*
fi
fi
fi
echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF
fi
XML_I18N_MERGE_OAF_RULE='\%.oaf : \%.oaf.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -o $(top_srcdir)/po $< $*.oaf'
XML_I18N_MERGE_KEYS_RULE='\%.keys : \%.keys.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -k $(top_srcdir)/po $< $*.keys'
XML_I18N_MERGE_DESKTOP_RULE='\%.desktop : \%.desktop.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.desktop'
XML_I18N_MERGE_DIRECTORY_RULE='\%.directory : \%.directory.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.directory'
XML_I18N_MERGE_SOUNDLIST_RULE='\%.soundlist : \%.soundlist.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.soundlist'
XML_I18N_MERGE_PONG_RULE='\%.pong : \%.pong.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -x $(top_srcdir)/po $< $*.pong'
XML_I18N_MERGE_XML_RULE='\%.xml : \%.xml.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -x $(top_srcdir)/po $< $*.xml'
# Always use our own xml-i18n-tools.
XML_I18N_EXTRACT='$(top_builddir)/xml-i18n-extract'
XML_I18N_MERGE='$(top_builddir)/xml-i18n-merge'
XML_I18N_UPDATE='$(top_builddir)/xml-i18n-update'
XML_I18N_MERGE_SOUNDLIST_RULE='\%.soundlist : \%.soundlist.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
$(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< $*.soundlist'
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1789: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XML_I18N_TOOLS_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XML_I18N_TOOLS_PERL" in
/*)
ac_cv_path_XML_I18N_TOOLS_PERL="$XML_I18N_TOOLS_PERL" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_XML_I18N_TOOLS_PERL="$XML_I18N_TOOLS_PERL" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_XML_I18N_TOOLS_PERL="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
;;
esac
fi
XML_I18N_TOOLS_PERL="$ac_cv_path_XML_I18N_TOOLS_PERL"
if test -n "$XML_I18N_TOOLS_PERL"; then
echo "$ac_t""$XML_I18N_TOOLS_PERL" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$XML_I18N_TOOLS_PERL"; then
{ echo "configure: error: perl not found; required for xml-i18n-tools" 1>&2; exit 1; }
fi
if test -z "`$XML_I18N_TOOLS_PERL -v | fgrep '5.' 2> /dev/null`"; then
{ echo "configure: error: perl 5.x required for xml-i18n-tools" 1>&2; exit 1; }
fi
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_shared=yes
fi
# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_static=yes
fi
# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_fast_install=yes
fi
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1910: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:1931: checking build system type" >&5
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1951: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1990: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:2014: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:2017: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$ac_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:2052: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi
fi
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:2068: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi
fi
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:2104: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
rm -f conftestdata
ac_cv_prog_LN_S="ln -s"
else
ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
echo "$ac_t""yes" 1>&6
else
echo "$ac_t""no" 1>&6
fi
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
#
# the following will cause an existing older ltconfig to fail, so
# we ignore this at the expense of the cache file... Checking this
# will just take longer ... bummer!
#libtool_flags="--cache-file=$cache_file"
#
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
enableval="$enable_libtool_lock"
:
fi
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '#line 2158 "configure"' > conftest.$ac_ext
if { (eval echo configure:2159: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:2180: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2185 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { (eval echo configure:2192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
lt_cv_cc_needs_belf=no
fi
rm -f conftest*
fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
esac
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
# Check whether --with-glib-prefix or --without-glib-prefix was given.
if test "${with_glib_prefix+set}" = set; then
withval="$with_glib_prefix"
glib_config_prefix="$withval"
else
glib_config_prefix=""
fi
# Check whether --with-glib-exec-prefix or --without-glib-exec-prefix was given.
if test "${with_glib_exec_prefix+set}" = set; then
withval="$with_glib_exec_prefix"
glib_config_exec_prefix="$withval"
else
glib_config_exec_prefix=""
fi
# Check whether --enable-glibtest or --disable-glibtest was given.
if test "${enable_glibtest+set}" = set; then
enableval="$enable_glibtest"
:
else
enable_glibtest=yes
fi
if test x$glib_config_exec_prefix != x ; then
glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
if test x${GLIB_CONFIG+set} != xset ; then
GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
fi
fi
if test x$glib_config_prefix != x ; then
glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
if test x${GLIB_CONFIG+set} != xset ; then
GLIB_CONFIG=$glib_config_prefix/bin/glib-config
fi
fi
for module in . gthread
do
case "$module" in
gmodule)
glib_config_args="$glib_config_args gmodule"
;;
gthread)
glib_config_args="$glib_config_args gthread"
;;
esac
done
# Extract the first word of "glib-config", so it can be a program name with args.
set dummy glib-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2348: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GLIB_CONFIG" in
/*)
ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GLIB_CONFIG="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_GLIB_CONFIG" && ac_cv_path_GLIB_CONFIG="no"
;;
esac
fi
GLIB_CONFIG="$ac_cv_path_GLIB_CONFIG"
if test -n "$GLIB_CONFIG"; then
echo "$ac_t""$GLIB_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
min_glib_version=1.2.0
echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
echo "configure:2383: checking for GLIB - version >= $min_glib_version" >&5
no_glib=""
if test "$GLIB_CONFIG" = "no" ; then
no_glib=yes
else
GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
if test "x$enable_glibtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$GLIB_LIBS $LIBS"
rm -f conf.glibtest
if test "$cross_compiling" = yes; then
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
#line 2406 "configure"
#include "confdefs.h"
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.glibtest");
/* HP/UX 9 (% #!) writes to sscanf strings */
tmp_version = g_strdup("$min_glib_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_glib_version");
exit(1);
}
if ((glib_major_version != $glib_config_major_version) ||
(glib_minor_version != $glib_config_minor_version) ||
(glib_micro_version != $glib_config_micro_version))
{
printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
$glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
glib_major_version, glib_minor_version, glib_micro_version);
printf ("*** was found! If glib-config was correct, then it is best\n");
printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
}
else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
(glib_minor_version != GLIB_MINOR_VERSION) ||
(glib_micro_version != GLIB_MICRO_VERSION))
{
printf("*** GLIB header files (version %d.%d.%d) do not match\n",
GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
glib_major_version, glib_minor_version, glib_micro_version);
}
else
{
if ((glib_major_version > major) ||
((glib_major_version == major) && (glib_minor_version > minor)) ||
((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
glib_major_version, glib_minor_version, glib_micro_version);
printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GLIB is always available from ftp://ftp.gtk.org.\n";);
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the glib-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
printf("*** correct copy of glib-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
EOF
if { (eval echo configure:2482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
no_glib=yes
fi
rm -fr conftest*
fi
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_glib" = x ; then
echo "$ac_t""yes" 1>&6
:
else
echo "$ac_t""no" 1>&6
if test "$GLIB_CONFIG" = "no" ; then
echo "*** The glib-config script installed by GLIB could not be found"
echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GLIB_CONFIG environment variable to the"
echo "*** full path to glib-config."
else
if test -f conf.glibtest ; then
:
else
echo "*** Could not run GLIB test program, checking why..."
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$LIBS $GLIB_LIBS"
cat > conftest.$ac_ext <<EOF
#line 2516 "configure"
#include "confdefs.h"
#include <glib.h>
#include <stdio.h>
int main() {
return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
; return 0; }
EOF
if { (eval echo configure:2526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GLIB or finding the wrong"
echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"
echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
echo "*** came with the system with the command"
echo "***"
echo "*** rpm --erase --nodeps gtk gtk-devel"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
echo "*** may want to edit the glib-config script: $GLIB_CONFIG"
fi
rm -f conftest*
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GLIB_CFLAGS=""
GLIB_LIBS=""
{ echo "configure: error: glib test failed" 1>&2; exit 1; }
fi
rm -f conf.glibtest
# Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
withval="$with_gtk_prefix"
gtk_config_prefix="$withval"
else
gtk_config_prefix=""
fi
# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
if test "${with_gtk_exec_prefix+set}" = set; then
withval="$with_gtk_exec_prefix"
gtk_config_exec_prefix="$withval"
else
gtk_config_exec_prefix=""
fi
# Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
enableval="$enable_gtktest"
:
else
enable_gtktest=yes
fi
for module in .
do
case "$module" in
gthread)
gtk_config_args="$gtk_config_args gthread"
;;
esac
done
if test x$gtk_config_exec_prefix != x ; then
gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
fi
fi
if test x$gtk_config_prefix != x ; then
gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
fi
fi
# Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2614: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GTK_CONFIG" in
/*)
ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
;;
esac
fi
GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
if test -n "$GTK_CONFIG"; then
echo "$ac_t""$GTK_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
min_gtk_version=1.0.0
echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:2649: checking for GTK - version >= $min_gtk_version" >&5
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
else
GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$GTK_LIBS $LIBS"
rm -f conf.gtktest
if test "$cross_compiling" = yes; then
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
#line 2672 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.gtktest");
/* HP/UX 9 (% #!) writes to sscanf strings */
tmp_version = g_strdup("$min_gtk_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
printf("%s, bad version string\n", "$min_gtk_version");
exit(1);
}
if ((gtk_major_version != $gtk_config_major_version) ||
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf ("*** was found! If gtk-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
}
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
(gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
}
#endif /* defined (GTK_MAJOR_VERSION) ... */
else
{
if ((gtk_major_version > major) ||
((gtk_major_version == major) && (gtk_minor_version > minor)) ||
((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n";);
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
printf("*** correct copy of gtk-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
EOF
if { (eval echo configure:2750: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
no_gtk=yes
fi
rm -fr conftest*
fi
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_gtk" = x ; then
echo "$ac_t""yes" 1>&6
:
else
echo "$ac_t""no" 1>&6
if test "$GTK_CONFIG" = "no" ; then
echo "*** The gtk-config script installed by GTK could not be found"
echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GTK_CONFIG environment variable to the"
echo "*** full path to gtk-config."
else
if test -f conf.gtktest ; then
:
else
echo "*** Could not run GTK test program, checking why..."
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
cat > conftest.$ac_ext <<EOF
#line 2784 "configure"
#include "confdefs.h"
#include <gtk/gtk.h>
#include <stdio.h>
int main() {
return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
; return 0; }
EOF
if { (eval echo configure:2794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"
echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
echo "*** came with the system with the command"
echo "***"
echo "*** rpm --erase --nodeps gtk gtk-devel"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GTK was incorrectly installed"
echo "*** or that you have moved GTK since it was installed. In the latter case, you"
echo "*** may want to edit the gtk-config script: $GTK_CONFIG"
fi
rm -f conftest*
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GTK_CFLAGS=""
GTK_LIBS=""
{ echo "configure: error: gtk+ test failed" 1>&2; exit 1; }
fi
rm -f conf.gtktest
gda_base_libs="$GLIB_LIBS $GTK_LIBS"
gda_base_cflags="$GLIB_CFLAGS $GTK_CFLAGS"
echo $ac_n "checking for ORBit""... $ac_c" 1>&6
echo "configure:2836: checking for ORBit" >&5
if orbit-config --libs > /dev/null 2>&1
then
echo "$ac_t""found" 1>&6
ORBIT_IDL=`which orbit-idl`
else
{ echo "configure: error: not found" 1>&2; exit 1; }
fi
use_gconf=false
gconfminver="0.9"
echo $ac_n "checking for GConf >= $gconfminver""... $ac_c" 1>&6
echo "configure:2848: checking for GConf >= $gconfminver" >&5
if gconf-config --libs gconf > /dev/null 2>&1
then
gconfver=`gconf-config --version | awk 'BEGIN {FS="."}{printf "%d", $1*1000+$2}'`
if test "$gconfver" -ge 9
then
echo "$ac_t""found" 1>&6
gda_gconf_libs=`gconf-config --libs gconf`
gda_gconf_cflags=`gconf-config --cflags gconf`
use_gconf=true
fi
fi
if test -z $use_gconf
then
{ echo "configure: error:
*** GConf $gconfminver or later is necessary in order to build libgda." 1>&2; exit 1; }
fi
# Bonobo checks
# Check whether --with-bonobo-prefix or --without-bonobo-prefix was given.
if test "${with_bonobo_prefix+set}" = set; then
withval="$with_bonobo_prefix"
bonobo_prefix="$withval"
else
bonobo_prefix=""
fi
# Check whether --with-bonobo-exec-prefix or --without-bonobo-exec-prefix was given.
if test "${with_bonobo_exec_prefix+set}" = set; then
withval="$with_bonobo_exec_prefix"
bonobo_exec_prefix="$withval"
else
bonobo_exec_prefix=""
fi
# Check whether --enable-bonobotest or --disable-bonobotest was given.
if test "${enable_bonobotest+set}" = set; then
enableval="$enable_bonobotest"
:
else
enable_bonobotest=yes
fi
if test x$bonobo_exec_prefix != x ; then
bonobo_args="$bonobo_args --exec-prefix=$bonobo_exec_prefix"
if test x${GNOME_CONFIG+set} != xset ; then
GNOME_CONFIG=$bonobo_exec_prefix/bin/gnome-config
fi
fi
if test x$bonobo_prefix != x ; then
bonobo_args="$bonobo_args --prefix=$bonobo_prefix"
if test x${GNOME_CONFIG+set} != xset ; then
GNOME_CONFIG=$bonobo_prefix/bin/gnome-config
fi
fi
# Extract the first word of "gnome-config", so it can be a program name with args.
set dummy gnome-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2910: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GNOME_CONFIG" in
/*)
ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
echo "$ac_t""$GNOME_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
min_bonobo_version=1.0
echo $ac_n "checking for BONOBO - version >= $min_bonobo_version""... $ac_c" 1>&6
echo "configure:2945: checking for BONOBO - version >= $min_bonobo_version" >&5
no_bonobo=""
if test "$GNOME_CONFIG" = "no" ; then
no_bonobo=yes
else
BONOBO_CFLAGS=`$GNOME_CONFIG $bonoboconf_args --cflags bonobo bonobox`
BONOBO_LIBS=`$GNOME_CONFIG $bonoboconf_args --libs bonobo bonobox`
bonobo_major_version=`$GNOME_CONFIG $bonobo_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
bonobo_minor_version=`$GNOME_CONFIG $bonobo_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
bonobo_micro_version=`$GNOME_CONFIG $bonobo_config_args --version | \
sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
if test "x$enable_bonobotest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $BONOBO_CFLAGS"
LIBS="$LIBS $BONOBO_LIBS"
rm -f conf.bonobotest
if test "$cross_compiling" = yes; then
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
#line 2969 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <bonobo.h>
static char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.bonobotest");
bonobo_object_get_type ();
return 0;
}
EOF
if { (eval echo configure:3005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
no_bonobo=yes
fi
rm -fr conftest*
fi
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_bonobo" = x ; then
echo "$ac_t""yes" 1>&6
:
else
echo "$ac_t""no" 1>&6
if test "$GNOME_CONFIG" = "no" ; then
echo "*** The gnome-config script installed by GNOME-LIBS could not be found"
echo "*** If BONOBO was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GNOME_CONFIG environment variable to the"
echo "*** full path to gnome-config."
else
if test -f conf.bonobotest ; then
:
else
echo "*** Could not run BONOBO test program, checking why..."
CFLAGS="$CFLAGS $BONOBO_CFLAGS"
LIBS="$LIBS $BONOBO_LIBS"
cat > conftest.$ac_ext <<EOF
#line 3039 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <bonobo/gnome-object.h>
int main() {
return 0;
; return 0; }
EOF
if { (eval echo configure:3049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding BONOBO or finding the wrong"
echo "*** version of BONOBO. If it is not finding BONOBO, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means BONOBO was incorrectly installed"
echo "*** or that you have moved BONOBO since it was installed. In the latter case, you"
echo "*** may want to edit the gnome-config script: $GNOME_CONFIG"
fi
rm -f conftest*
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
BONOBO_CFLAGS=""
BONOBO_LIBS=""
{ echo "configure: error: Bonobo >= 1.0 is needed to compile GNOME-DB" 1>&2; exit 1; }
fi
rm -f conf.bonobotest
gda_bonobo_cflags=`gnome-config --cflags bonobo`
gda_bonobo_libs=`gnome-config --libs bonobo`
echo $ac_n "checking for libxml""... $ac_c" 1>&6
echo "configure:3086: checking for libxml" >&5
if xml-config --libs > /dev/null 2>&1
then
gda_xml_libs=`xml-config --libs`
gda_xml_cflags=`xml-config --cflags`
echo "$ac_t""found" 1>&6
else
{ echo "configure: error: not found" 1>&2; exit 1; }
fi
echo $ac_n "checking for libxslt""... $ac_c" 1>&6
echo "configure:3097: checking for libxslt" >&5
if xslt-config --libs > /dev/null 2>&1
then
echo "$ac_t""found" 1>&6
gda_xslt_libs=`xslt-config --libs`
gda_xslt_cflags=`xslt-config --cflags`
else
echo "configure: warning: not found" 1>&2
fi
# Extract the first word of "gtkdoc-mkdb", so it can be a program name with args.
set dummy gtkdoc-mkdb; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3112: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GTKDOC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$GTKDOC"; then
ac_cv_prog_GTKDOC="$GTKDOC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_GTKDOC="true"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_GTKDOC" && ac_cv_prog_GTKDOC="false"
fi
fi
GTKDOC="$ac_cv_prog_GTKDOC"
if test -n "$GTKDOC"; then
echo "$ac_t""$GTKDOC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if $GTKDOC; then
HAVE_GTK_DOC_TRUE=
HAVE_GTK_DOC_FALSE='#'
else
HAVE_GTK_DOC_TRUE='#'
HAVE_GTK_DOC_FALSE=
fi
if $GTKDOC; then
ENABLE_GTK_DOC_TRUE=
ENABLE_GTK_DOC_FALSE='#'
else
ENABLE_GTK_DOC_TRUE='#'
ENABLE_GTK_DOC_FALSE=
fi
# Check whether --with-odbc or --without-odbc was given.
if test "${with_odbc+set}" = set; then
withval="$with_odbc"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
odbcdir=""
echo $ac_n "checking for ODBC files""... $ac_c" 1>&6
echo "configure:3173: checking for ODBC files" >&5
for d in $dir /usr /usr/local
do
if test -f $d/lib/libodbc.so
then
echo "$ac_t""found ODBC in $d" 1>&6
odbclib="-lodbc"
odbcdir=$d
break
fi
if test -f $d/lib/libiodbc.so
then
echo "$ac_t""found iODBC in $d" 1>&6
odbclib="-liodbc"
odbcdir=$d
break
fi
done
if test x$odbcdir = x
then
echo "configure: warning: ODBC backend not used" 1>&2
else
cat >> confdefs.h <<\EOF
#define HAVE_ODBC 1
EOF
ODBC_CFLAGS="-I${odbcdir}/include"
ODBC_LIBS="-L${odbcdir}/lib ${odbclib}"
fi
fi
if test x$odbcdir != x; then
ODBC_TRUE=
ODBC_FALSE='#'
else
ODBC_TRUE='#'
ODBC_FALSE=
fi
# Check whether --with-mysql or --without-mysql was given.
if test "${with_mysql+set}" = set; then
withval="$with_mysql"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
mysqldir=""
echo $ac_n "checking for MySQL files""... $ac_c" 1>&6
echo "configure:3228: checking for MySQL files" >&5
for d in $dir /usr /usr/local /usr/local/mysql /opt/mysql /opt/packages/mysql
do
if test -f $d/include/mysql/mysql.h
then
mysqldir_suffix=/mysql
else
mysqldir_suffix=
fi
if test -f $d/lib/mysql/libmysqlclient.a -o -f $d/lib/libmysqlclient.so
then
echo "$ac_t""found mysql in $d" 1>&6
mysqldir=$d
mysqllibdir_suffix=/mysql
break
fi
if test -f $d/lib/libmysqlclient.a -o -f $d/lib/libmysqlclient.so
then
echo "$ac_t""found mysql in $d" 1>&6
mysqldir=$d
mysqllibdir_suffix=
break
fi
done
if test x$mysqldir = x
then
echo "configure: warning: MySQL backend not used" 1>&2
else
cat >> confdefs.h <<\EOF
#define HAVE_MYSQL 1
EOF
MYSQL_CFLAGS="-I${mysqldir}/include${mysqldir_suffix}"
MYSQL_LIBS="-L${mysqldir}/lib${mysqllibdir_suffix} -lmysqlclient"
if test -f ${mysqldir}/lib${mysqllibdir_suffix}/libmystrings.a
then
MYSQL_LIBS="${MYSQL_LIBS} -lmystrings"
fi
fi
fi
if test x$mysqldir != x; then
MYSQL_TRUE=
MYSQL_FALSE='#'
else
MYSQL_TRUE='#'
MYSQL_FALSE=
fi
# Check whether --with-postgres or --without-postgres was given.
if test "${with_postgres+set}" = set; then
withval="$with_postgres"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
echo $ac_n "checking for Postgres files""... $ac_c" 1>&6
echo "configure:3292: checking for Postgres files" >&5
postgresdir=""
for d in $dir /usr /usr/local/postgres /opt/postgres /opt/packages/postgres /disk/postgres /usr/local/pgsql
do
if test -f $d/lib/libpq.so
then
echo "$ac_t""found Postgres in $d" 1>&6
postgresdir=$d
break
fi
done
if test x$postgresdir = x
then
echo "configure: warning: Postgres backend not used" 1>&2
else
if test -f ${postgresdir}/include/libpq-fe.h
then
POSTGRES_CFLAGS=-I${postgresdir}/include
elif test -f ${postgresdir}/include/pgsql/libpq-fe.h
then
POSTGRES_CFLAGS=-I${postgresdir}/include/pgsql
elif test -f ${postgresdir}/include/postgresql/libpq-fe.h
then
POSTGRES_CFLAGS=-I${postgresdir}/include/postgresql
else
echo "configure: warning: Postgres include files not found" 1>&2
postgresdir=""
fi
POSTGRES_LIBS="-L${postgresdir}/lib -lpq"
cat >> confdefs.h <<\EOF
#define HAVE_POSTGRES 1
EOF
fi
fi
if test x$postgresdir != x; then
POSTGRES_TRUE=
POSTGRES_FALSE='#'
else
POSTGRES_TRUE='#'
POSTGRES_FALSE=
fi
# Check whether --with-primebase or --without-primebase was given.
if test "${with_primebase+set}" = set; then
withval="$with_primebase"
if test $withval != yes
then
dir=$withval
else
dir="/opt/primebase/sdk"
fi
primebasedir=""
echo $ac_n "checking for PrimeBase SDK >= 4.0 Pre-final""... $ac_c" 1>&6
echo "configure:3352: checking for PrimeBase SDK >= 4.0 Pre-final" >&5
for d in $dir /opt/primebase /usr/local/primebase
do
if test -e ${d}/lib/libpbvm.so
then
for i in sdk include
do
if test -e ${d}/${i}/pbapi.h
then
primebasedir=${d}
PRIMEBASE_LIBS="-lm -lnsl -L${d}/lib -lpbvm"
PRIMEBASE_CFLAGS="-I${d}/${i}"
cat >> confdefs.h <<\EOF
#define HAVE_PRIMEBASE 1
EOF
break
fi
done
fi
done
if test x$primebasedir != x
then
echo "$ac_t""found PrimeBase SDK in $primebasedir" 1>&6
else
echo "$ac_t""not found" 1>&6
fi
fi
if test x$primebasedir != x; then
PRIMEBASE_TRUE=
PRIMEBASE_FALSE='#'
else
PRIMEBASE_TRUE='#'
PRIMEBASE_FALSE=
fi
# Check whether --with-tds or --without-tds was given.
if test "${with_tds+set}" = set; then
withval="$with_tds"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local/freetds"
fi
echo $ac_n "checking for freetds files""... $ac_c" 1>&6
echo "configure:3403: checking for freetds files" >&5
freetdsdir=""
for d in $dir /usr/local/freetds /opt/freetds /opt/packages/freetds /opt/freetds-0.50
do
if test -f $d/include/ctpublic.h
then
echo "$ac_t""found freetds in $d" 1>&6
freetdsdir=$d
break
fi
done
if test x$freetdsdir = x
then
echo "configure: warning: tds backend not used" 1>&2
else
TDS_CFLAGS=-I${freetdsdir}/include
TDS_LIBS="-L${freetdsdir}/lib -lct"
cat >> confdefs.h <<\EOF
#define HAVE_TDS 1
EOF
fi
fi
if test x$freetdsdir != x; then
TDS_TRUE=
TDS_FALSE='#'
else
TDS_TRUE='#'
TDS_FALSE=
fi
# Check whether --with-sybase or --without-sybase was given.
if test "${with_sybase+set}" = set; then
withval="$with_sybase"
echo $ac_n "checking for Sybase files""... $ac_c" 1>&6
echo "configure:3444: checking for Sybase files" >&5
if test $withval != yes
then
dir=$withval
else
dir="/opt2/sybase"
fi
sybasedir=""
for d in $dir /usr/local/sybase /opt/sybase /opt/packages/sybase
do
if test -f "$d/include/ctpublic.h"
then
echo "$ac_t""found Sybase in $d" 1>&6
sybasedir="$d"
break
fi
for v in 11.9.2 11.0.3.3
do
if test -f "$d-$v/include/ctpublic.h"
then
echo "$ac_t""found Sybase in $d-$v" 1>&6
sybasedir="$d-$v"
break
fi
done
done
if test x$sybasedir = x
then
echo "configure: warning: Sybase backend not used" 1>&2
else
SYBASE_CFLAGS="-I${sybasedir}/include"
SYBASE_LIBS="-lnsl -ldl -lm -L${sybasedir}/lib"
echo $ac_n "checking for Sybase host system type""... $ac_c" 1>&6
echo "configure:3477: checking for Sybase host system type" >&5
echo "$ac_t""$host" 1>&6
case "$host" in
*linux*) sybase_ctlibs="-lct -lcs -lsybtcl -lcomn -lintl"
sybase_blklibs="-lblk ${sybase_ctlibs}"
SYBASE_LIBS="${SYBASE_LIBS} ${sybase_ctlibs} ${sybase_blklibs}"
cat >> confdefs.h <<\EOF
#define HAVE_SYBASE 1
EOF
;;
*) echo "configure: warning: this host type is unsupported; sybase backend not used" 1>&2
sybasedir=""
;;
esac
fi
fi
if test x$sybasedir != x; then
SYBASE_TRUE=
SYBASE_FALSE='#'
else
SYBASE_TRUE='#'
SYBASE_FALSE=
fi
# Check whether --enable-sybase-debug or --disable-sybase-debug was given.
if test "${enable_sybase_debug+set}" = set; then
enableval="$enable_sybase_debug"
:
else
enable_sybase_debug=no
fi
if test "x$sybasedir" != "x"
then
echo $ac_n "checking for Sybase debugging level""... $ac_c" 1>&6
echo "configure:3518: checking for Sybase debugging level" >&5
if test "x$enable_sybase_debug" = "xmax"
then
cat >> confdefs.h <<\EOF
#define SYBASE_DEBUG 1
EOF
if test -f $sybasedir/devlib/libct.a
then
echo "$ac_t""max" 1>&6
echo "configure: warning: erase passwords in bug-buddy debug output before sending bugreports" 1>&2
SYBASE_LIBS=${sybasedir}/devlib
else
echo "$ac_t""min" 1>&6
echo "configure: warning: no debug libraries found" 1>&2
enable_sybase_debug=min
fi
else
echo "$ac_t""$enable_sybase_debug" 1>&6
if test "x$enable_sybase_debug" != "x"
then
if test "x$enable_sybase_debug" != "xno"
then
cat >> confdefs.h <<\EOF
#define SYBASE_DEBUG 1
EOF
fi
fi
fi
else
if test "x$enable_sybase_debug" != "xno"
then
echo "configure: warning: you applied sybase debugging options" 1>&2
fi
enable_sybase_debug=no
fi
# Check whether --with-ldap or --without-ldap was given.
if test "${with_ldap+set}" = set; then
withval="$with_ldap"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
echo $ac_n "checking for LDAP files""... $ac_c" 1>&6
echo "configure:3567: checking for LDAP files" >&5
ldapdir=""
for d in $dir /usr /usr/local/ldap /opt/ldap /opt/packages/ldap /usr/local/openldap /opt/openldap /opt/packages/openldap
do
if test -f $d/lib/libldap.so
then
echo "$ac_t""found LDAP in $d" 1>&6
LDAP_LIBS="-lldap -llber"
ldapdir=$d
break
fi
if test -f $d/lib/libopenldap.so
then
echo "$ac_t""found OpenLDAP in $d" 1>&6
LDAP_LIBS="-lopenldap -llber-openldap"
ldapdir=$d
break
fi
done
if test x$ldapdir = x
then
echo "configure: warning: LDAP backend not used" 1>&2
else
if test -f ${ldapdir}/include/ldap.h
then
LDAP_CFLAGS="-I${ldapdir}/include"
elif test -f ${ldapdir}/include/openldap/ldap.h
then
LDAP_CFLAGS="-I${ldapdir}/include/openldap"
else
echo "configure: warning: LDAP include files not found. backend not used" 1>&2
ldapdir=""
fi
cat >> confdefs.h <<\EOF
#define HAVE_LDAP 1
EOF
LDAP_LIBS="-L${ldapdir}/lib ${LDAP_LIBS}"
fi
fi
if test x$ldapdir != x; then
LDAP_TRUE=
LDAP_FALSE='#'
else
LDAP_TRUE='#'
LDAP_FALSE=
fi
# Check whether --with-oracle or --without-oracle was given.
if test "${with_oracle+set}" = set; then
withval="$with_oracle"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
echo $ac_n "checking for ORACLE installation""... $ac_c" 1>&6
echo "configure:3631: checking for ORACLE installation" >&5
for d in $dir $ORACLE_HOME /opt/oracle
do
if test -f $d/lib/libclntsh.so
then
echo "$ac_t""found ORACLE in $d" 1>&6
oracledir=$d
break
fi
done
if test x$oracledir = x
then
echo "configure: warning: ORACLE backend not used" 1>&2
else
cat >> confdefs.h <<\EOF
#define HAVE_ORACLE 1
EOF
ORACLE_CFLAGS="-I${ORACLE_HOME}/rdbms/demo -I${ORACLE_HOME}/rdbms/public -I${ORACLE_HOME}/plsql/public -I${ORACLE_HOME}/network/public"
ORACLE_LIBS="-L${ORACLE_HOME}/lib -lm -ldl -lserver8 -lclient8 \
-lgeneric8 -lcommon8 -lvsn8 -lagent8 -lmm -lclntst8 \
-lslax8 -lsql8 -lcore8 -lnls8 -lplc8 -lplp8 -lpls8 \
-lpsa8"
fi
fi
if test x$oracledir != x; then
ORACLE_TRUE=
ORACLE_FALSE='#'
else
ORACLE_TRUE='#'
ORACLE_FALSE=
fi
# Check whether --with-interbase or --without-interbase was given.
if test "${with_interbase+set}" = set; then
withval="$with_interbase"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
echo $ac_n "checking for INTERBASE installation""... $ac_c" 1>&6
echo "configure:3680: checking for INTERBASE installation" >&5
for d in $dir /usr/local/interbase /usr/local /usr /opt/interbase
do
if test -f $d/include/ibase.h
then
echo "$ac_t""found INTERBASE in $d" 1>&6
interbasedir=$d
break
fi
done
if test x$interbasedir = x
then
echo "configure: warning: INTERBASE backend not used" 1>&2
else
cat >> confdefs.h <<\EOF
#define HAVE_INTERBASE 1
EOF
INTERBASE_CFLAGS="-I${interbasedir}/include"
INTERBASE_LIBS="-L${interbasedir}/lib -lgds -ldl -lcrypt"
fi
fi
if test x$interbasedir != x; then
INTERBASE_TRUE=
INTERBASE_FALSE='#'
else
INTERBASE_TRUE='#'
INTERBASE_FALSE=
fi
# Check whether --with-mdb or --without-mdb was given.
if test "${with_mdb+set}" = set; then
withval="$with_mdb"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
echo $ac_n "checking for MDB installation""... $ac_c" 1>&6
echo "configure:3726: checking for MDB installation" >&5
for d in $dir /usr/local/mdbtools /usr/local /usr /opt/mdbtools
do
if test -f $d/include/mdbtools.h
then
echo "$ac_t""found MDB in $d" 1>&6
mdbdir=$d
break
fi
done
if test x$mdbdir = x
then
echo "configure: warning: MDB libraries not used" 1>&2
else
cat >> confdefs.h <<\EOF
#define HAVE_MDB 1
EOF
MDB_CFLAGS="-I${mdbdir}/include"
MDB_LIBS="-L{mdbdir}/lib -lmdb"
fi
fi
if test x$mdbdir != x; then
MDB_TRUE=
MDB_FALSE='#'
else
MDB_TRUE='#'
MDB_FALSE=
fi
# Check whether --with-camel or --without-camel was given.
if test "${with_camel+set}" = set; then
withval="$with_camel"
if test $withval != yes
then
dir=$withval
else
dir="/usr/local"
fi
echo $ac_n "checking for Camel files""... $ac_c" 1>&6
echo "configure:3772: checking for Camel files" >&5
cameldir=""
for d in $dir /usr /usr/local
do
if test -f $d/bin/evolution
then
echo "$ac_t""found Camel in $d" 1>&6
cameldir=$d
break
fi
done
if test x$cameldir = x
then
echo "configure: warning: Mail backend not used" 1>&2
else
CAMEL_CFLAGS="-I$d/include"
CAMEL_LIBS="-L${cameldir}/lib -lcamel"
cat >> confdefs.h <<\EOF
#define HAVE_CAMEL 1
EOF
fi
fi
if test x$cameldir != x; then
MAIL_TRUE=
MAIL_FALSE='#'
else
MAIL_TRUE='#'
MAIL_FALSE=
fi
ALL_LINGUAS="ca da de el es fi fr ga gl hu it ja nl nn no pl pt_BR ru sk sl sv uk"
echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:3811: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3816 "configure"
#include "confdefs.h"
int main() {
/* Ultrix mips cc rejects this. */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this. */
char const *const *ccp;
char **p;
/* NEC SVR4.0.2 mips cc rejects this. */
struct point {int x, y;};
static struct point const zero = {0,0};
/* AIX XL C 1.02.0.0 rejects this.
It does not let you subtract one const X* pointer from another in an arm
of an if-expression whose if-part is not a constant expression */
const char *g = "string";
ccp = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this. */
char *t;
char const *s = 0 ? (char *) 0 : (char const *) 0;
*t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
int x[] = {25, 17};
const int *foo = &x[0];
++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
typedef const int *iptr;
iptr p = 0;
++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
"k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
struct s { int j; const int *ap[3]; };
struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
const int foo = 10;
}
; return 0; }
EOF
if { (eval echo configure:3865: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_c_const=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_c_const" 1>&6
if test $ac_cv_c_const = no; then
cat >> confdefs.h <<\EOF
#define const
EOF
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
echo "configure:3886: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
#line 3893 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
if { (eval echo configure:3900: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest*
done
fi
echo "$ac_t""$ac_cv_c_inline" 1>&6
case "$ac_cv_c_inline" in
inline | yes) ;;
no) cat >> confdefs.h <<\EOF
#define inline
EOF
;;
*) cat >> confdefs.h <<EOF
#define inline $ac_cv_c_inline
EOF
;;
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
echo "configure:3926: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3931 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_off_t=yes
else
rm -rf conftest*
ac_cv_type_off_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_off_t" 1>&6
if test $ac_cv_type_off_t = no; then
cat >> confdefs.h <<\EOF
#define off_t long
EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
echo "configure:3959: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3964 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_size_t=yes
else
rm -rf conftest*
ac_cv_type_size_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_size_t" 1>&6
if test $ac_cv_type_size_t = no; then
cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF
fi
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
echo "configure:3994: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3999 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
if { (eval echo configure:4006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_header_alloca_h=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
if test $ac_cv_header_alloca_h = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA_H 1
EOF
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
echo "configure:4027: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4032 "configure"
#include "confdefs.h"
#ifdef __GNUC__
# define alloca __builtin_alloca
#else
# ifdef _MSC_VER
# include <malloc.h>
# define alloca _alloca
# else
# if HAVE_ALLOCA_H
# include <alloca.h>
# else
# ifdef _AIX
#pragma alloca
# else
# ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
# endif
# endif
# endif
# endif
#endif
int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
if { (eval echo configure:4060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_func_alloca_works=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
if test $ac_cv_func_alloca_works = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA 1
EOF
fi
if test $ac_cv_func_alloca_works = no; then
# The SVR3 libPW and SVR4 libucb both contain incompatible functions
# that cause trouble. Some versions do not even contain alloca or
# contain a buggy version. If you still want to use their alloca,
# use ar to extract alloca.o from them instead of compiling alloca.c.
ALLOCA=alloca.${ac_objext}
cat >> confdefs.h <<\EOF
#define C_ALLOCA 1
EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
echo "configure:4092: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4097 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
#else
wenotbecray
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "webecray" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_os_cray=yes
else
rm -rf conftest*
ac_cv_os_cray=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4122: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4127 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:4150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<EOF
#define CRAY_STACKSEG_END $ac_func
EOF
break
else
echo "$ac_t""no" 1>&6
fi
done
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
echo "configure:4177: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
#line 4185 "configure"
#include "confdefs.h"
find_stack_direction ()
{
static char *addr = 0;
auto char dummy;
if (addr == 0)
{
addr = &dummy;
return find_stack_direction ();
}
else
return (&dummy > addr) ? 1 : -1;
}
main ()
{
exit (find_stack_direction() < 0);
}
EOF
if { (eval echo configure:4204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_c_stack_direction=-1
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
cat >> confdefs.h <<EOF
#define STACK_DIRECTION $ac_cv_c_stack_direction
EOF
fi
for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:4229: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4234 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:4239: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4268: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4273 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:4296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
echo "configure:4321: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
#line 4329 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
Here is a matrix of mmap possibilities:
mmap private not fixed
mmap private fixed at somewhere currently unmapped
mmap private fixed at somewhere already mapped
mmap shared not fixed
mmap shared fixed at somewhere currently unmapped
mmap shared fixed at somewhere already mapped
For private mappings, we should verify that changes cannot be read()
back from the file, nor mmap's back from the file at a different
address. (There have been systems where private was not correctly
implemented like the infamous i386 svr4.0, and systems where the
VM page cache was not coherent with the filesystem buffer cache
like early versions of FreeBSD and possibly contemporary NetBSD.)
For shared mappings, we should conversely verify that changes get
propogated back to all the places they're supposed to be.
Grep wants private fixed already mapped.
The main things grep needs to know about mmap are:
* does it exist and is it safe to write into the mmap'd area
* how to use it (BSD variants) */
#include <sys/types.h>
#include <fcntl.h>
#include <sys/mman.h>
/* This mess was copied from the GNU getpagesize.h. */
#ifndef HAVE_GETPAGESIZE
# ifdef HAVE_UNISTD_H
# include <unistd.h>
# endif
/* Assume that all systems that can run configure have sys/param.h. */
# ifndef HAVE_SYS_PARAM_H
# define HAVE_SYS_PARAM_H 1
# endif
# ifdef _SC_PAGESIZE
# define getpagesize() sysconf(_SC_PAGESIZE)
# else /* no _SC_PAGESIZE */
# ifdef HAVE_SYS_PARAM_H
# include <sys/param.h>
# ifdef EXEC_PAGESIZE
# define getpagesize() EXEC_PAGESIZE
# else /* no EXEC_PAGESIZE */
# ifdef NBPG
# define getpagesize() NBPG * CLSIZE
# ifndef CLSIZE
# define CLSIZE 1
# endif /* no CLSIZE */
# else /* no NBPG */
# ifdef NBPC
# define getpagesize() NBPC
# else /* no NBPC */
# ifdef PAGESIZE
# define getpagesize() PAGESIZE
# endif /* PAGESIZE */
# endif /* no NBPC */
# endif /* no NBPG */
# endif /* no EXEC_PAGESIZE */
# else /* no HAVE_SYS_PARAM_H */
# define getpagesize() 8192 /* punt totally */
# endif /* no HAVE_SYS_PARAM_H */
# endif /* no _SC_PAGESIZE */
#endif /* no HAVE_GETPAGESIZE */
#ifdef __cplusplus
extern "C" { void *malloc(unsigned); }
#else
char *malloc();
#endif
int
main()
{
char *data, *data2, *data3;
int i, pagesize;
int fd;
pagesize = getpagesize();
/*
* First, make a file with some known garbage in it.
*/
data = malloc(pagesize);
if (!data)
exit(1);
for (i = 0; i < pagesize; ++i)
*(data + i) = rand();
umask(0);
fd = creat("conftestmmap", 0600);
if (fd < 0)
exit(1);
if (write(fd, data, pagesize) != pagesize)
exit(1);
close(fd);
/*
* Next, try to mmap the file at a fixed address which
* already has something else allocated at it. If we can,
* also make sure that we see the same garbage.
*/
fd = open("conftestmmap", O_RDWR);
if (fd < 0)
exit(1);
data2 = malloc(2 * pagesize);
if (!data2)
exit(1);
data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_FIXED, fd, 0L))
exit(1);
for (i = 0; i < pagesize; ++i)
if (*(data + i) != *(data2 + i))
exit(1);
/*
* Finally, make sure that changes to the mapped area
* do not percolate back to the file as seen by read().
* (This is a bug on some variants of i386 svr4.0.)
*/
for (i = 0; i < pagesize; ++i)
*(data2 + i) = *(data2 + i) + 1;
data3 = malloc(pagesize);
if (!data3)
exit(1);
if (read(fd, data3, pagesize) != pagesize)
exit(1);
for (i = 0; i < pagesize; ++i)
if (*(data + i) != *(data3 + i))
exit(1);
close(fd);
unlink("conftestmmap");
exit(0);
}
EOF
if { (eval echo configure:4469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_func_mmap_fixed_mapped=no
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
if test $ac_cv_func_mmap_fixed_mapped = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_MMAP 1
EOF
fi
for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h sys/param.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:4497: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4502 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:4507: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4537: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4542 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:4565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
if test "${ac_cv_func_stpcpy+set}" != "set"; then
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4594: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4599 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:4622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
cat >> confdefs.h <<\EOF
#define HAVE_STPCPY 1
EOF
fi
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
echo "configure:4656: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4661 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
if { (eval echo configure:4668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
am_cv_val_LC_MESSAGES=no
fi
rm -f conftest*
fi
echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
if test $am_cv_val_LC_MESSAGES = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_LC_MESSAGES 1
EOF
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
echo "configure:4689: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
USE_NLS=$enableval
else
USE_NLS=yes
fi
echo "$ac_t""$USE_NLS" 1>&6
BUILD_INCLUDED_LIBINTL=no
USE_INCLUDED_LIBINTL=no
if test "$USE_NLS" = "yes"; then
# AC_DEFINE(ENABLE_NLS)
# AC_MSG_CHECKING([whether included gettext is requested])
# AC_ARG_WITH(included-gettext,
# [ --with-included-gettext use the GNU gettext library included here],
# nls_cv_force_use_gnu_gettext=$withval,
# nls_cv_force_use_gnu_gettext=no)
# AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_force_use_gnu_gettext="no"
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
echo "configure:4722: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4727 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:4732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
echo "configure:4749: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4754 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
if { (eval echo configure:4761: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
gt_cv_func_gettext_libc=no
fi
rm -f conftest*
fi
echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
echo "configure:4777: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4785 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char bindtextdomain();
int main() {
bindtextdomain()
; return 0; }
EOF
if { (eval echo configure:4796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
echo "configure:4812: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
echo "configure:4817: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4825 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char gettext();
int main() {
gettext()
; return 0; }
EOF
if { (eval echo configure:4836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
gt_cv_func_gettext_libintl=yes
else
echo "$ac_t""no" 1>&6
gt_cv_func_gettext_libintl=no
fi
fi
echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
cat >> confdefs.h <<\EOF
#define HAVE_GETTEXT 1
EOF
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4875: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
/*)
ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
ac_cv_path_MSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
;;
esac
fi
MSGFMT="$ac_cv_path_MSGFMT"
if test -n "$MSGFMT"; then
echo "$ac_t""$MSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test "$MSGFMT" != "no"; then
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:4909: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4914 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:4937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4964: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
;;
esac
fi
GMSGFMT="$ac_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
/*)
ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
;;
esac
fi
XGETTEXT="$ac_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
echo "$ac_t""$XGETTEXT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
cat > conftest.$ac_ext <<EOF
#line 5032 "configure"
#include "confdefs.h"
int main() {
extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr
; return 0; }
EOF
if { (eval echo configure:5040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CATOBJEXT=.mo
DATADIRNAME=lib
fi
rm -f conftest*
INSTOBJEXT=.mo
fi
fi
# Added by Martin Baulig 12/15/98 for libc5 systems
if test "$gt_cv_func_gettext_libc" != "yes" \
&& test "$gt_cv_func_gettext_libintl" = "yes"; then
INTLLIBS=-lintl
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
fi
else
echo "$ac_t""no" 1>&6
fi
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
echo "configure:5070: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
nls_cv_use_catgets=$withval
else
nls_cv_use_catgets=no
fi
echo "$ac_t""$nls_cv_use_catgets" 1>&6
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
echo "configure:5083: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5091 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:5098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-li $LIBS"
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
echo "configure:5126: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5131 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char catgets();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_catgets) || defined (__stub___catgets)
choke me
#else
catgets();
#endif
; return 0; }
EOF
if { (eval echo configure:5154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_catgets=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_CATGETS 1
EOF
INTLOBJS="\$(CATOBJS)"
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5176: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GENCAT" in
/*)
ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GENCAT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
;;
esac
fi
GENCAT="$ac_cv_path_GENCAT"
if test -n "$GENCAT"; then
echo "$ac_t""$GENCAT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# if test "$GENCAT" != "no"; then
# AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
# if test "$GMSGFMT" = "no"; then
# AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
# fi
# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
# USE_INCLUDED_LIBINTL=yes
# CATOBJEXT=.cat
# INSTOBJEXT=.cat
# DATADIRNAME=lib
# INTLDEPS='$(top_builddir)/intl/libintl.a'
# INTLLIBS=$INTLDEPS
# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
# nls_cv_header_intl=intl/libintl.h
# nls_cv_header_libgt=intl/libgettext.h
# fi
else
echo "$ac_t""no" 1>&6
fi
fi
fi
if test "$CATOBJEXT" = "NONE"; then
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" != "yes"; then
cat >> confdefs.h <<\EOF
#define ENABLE_NLS 1
EOF
else
# Unset this variable since we use the non-zero value as a flag.
CATOBJEXT=
# dnl Mark actions used to generate GNU NLS library.
# INTLOBJS="\$(GETTOBJS)"
# AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
# AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
# AC_SUBST(MSGFMT)
# USE_INCLUDED_LIBINTL=yes
# CATOBJEXT=.gmo
# INSTOBJEXT=.mo
# DATADIRNAME=share
# INTLDEPS='$(top_builddir)/intl/libintl.a'
# INTLLIBS=$INTLDEPS
# LIBS=`echo $LIBS | sed -e 's/-lintl//'`
# nls_cv_header_intl=intl/libintl.h
# nls_cv_header_libgt=intl/libgettext.h
fi
if test "$XGETTEXT" != ":"; then
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
echo "$ac_t""found xgettext program is not GNU xgettext; ignore it" 1>&6
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=intl/libintl.h
nls_cv_header_libgt=intl/libgettext.h
fi
# # If this is used in GNU gettext we have to set USE_NLS to `yes'
# # because some of the sources are only built for this goal.
# if test "$PACKAGE" = gettext; then
# USE_NLS=yes
# USE_INCLUDED_LIBINTL=yes
# fi
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
echo "configure:5317: checking for catalogs to be installed" >&5
NEW_LINGUAS=
if test "x$LINGUAS" = "x"; then
LINGUAS=$ALL_LINGUAS
fi
for lang in $LINGUAS; do
case "$ALL_LINGUAS" in
*\ $lang\ *|$lang\ *|*\ $lang) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
echo "$ac_t""$LINGUAS" 1>&6
fi
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
test -d intl || mkdir intl
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
echo "configure:5348: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5353 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
msgformat=linux
else
echo "$ac_t""no" 1>&6
msgformat=xopen
fi
sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
fi
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
MKINSTALLDIRS=
if test -n "$ac_aux_dir"; then
MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
fi
if test -z "$MKINSTALLDIRS"; then
MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
fi
l=
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
GDA_CLIENT_LIBS="$gda_base_libs $gda_xml_libs $gda_gconf_libs $gda_bonobo_libs"
GDA_CLIENT_CFLAGS="$gda_base_cflags $gda_xml_cflags $gda_gconf_cflags $gda_bonobo_cflags"
GDA_PROVIDER_LIBS="$gda_base_libs $gda_xml_libs $gda_gconf_libs $gda_bonobo_libs"
GDA_PROVIDER_CFLAGS="$gda_base_cflags $gda_xml_cflags $gda_gconf_cflags $gda_bonobo_cflags"
XML_LIBS="$gda_xslt_libs"
XML_CFLAGS="$gda_xslt_cflags"
IDL_FLAGS=`gnome-config --cflags idl`
GDA_oafdir=`oaf-config --prefix`/share/oaf
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
DEFS=-DHAVE_CONFIG_H
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
trap 'rm -fr `echo "
Makefile
libgda.spec
macros/Makefile
po/Makefile.in
intl/Makefile
idl/Makefile
lib/Makefile
lib/gda-common/Makefile
lib/gda-client/Makefile
lib/gda-server/Makefile
bindings/Makefile
bindings/c++/Makefile
providers/Makefile
providers/gda-default-server/Makefile
providers/gda-odbc-server/Makefile
providers/gda-mysql-server/Makefile
providers/gda-postgres-server/Makefile
providers/gda-primebase-server/Makefile
providers/gda-sybase-server/Makefile
providers/gda-tds-server/Makefile
providers/gda-ldap-server/Makefile
providers/gda-oracle-server/Makefile
providers/gda-interbase-server/Makefile
providers/gda-mdb-server/Makefile
providers/gda-mail-server/Makefile
tools/Makefile
tools/gda-config
tools/gda-buildserver
tools/gda-buildclient
tools/templates/Makefile
testing/Makefile
doc/Makefile
doc/es/Makefile
doc/C/Makefile
doc/C/reference/Makefile
doc/C/reference/libgda-common/Makefile
doc/C/reference/libgda-client/Makefile
doc/pt_BR/Makefile
stamp.h
config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s% SHELL@%$SHELL%g
s% CFLAGS@%$CFLAGS%g
s% CPPFLAGS@%$CPPFLAGS%g
s% CXXFLAGS@%$CXXFLAGS%g
s% FFLAGS@%$FFLAGS%g
s% DEFS@%$DEFS%g
s% LDFLAGS@%$LDFLAGS%g
s% LIBS@%$LIBS%g
s% exec_prefix@%$exec_prefix%g
s% prefix@%$prefix%g
s% program_transform_name@%$program_transform_name%g
s% bindir@%$bindir%g
s% sbindir@%$sbindir%g
s% libexecdir@%$libexecdir%g
s% datadir@%$datadir%g
s% sysconfdir@%$sysconfdir%g
s% sharedstatedir@%$sharedstatedir%g
s% localstatedir@%$localstatedir%g
s% libdir@%$libdir%g
s% includedir@%$includedir%g
s% oldincludedir@%$oldincludedir%g
s% infodir@%$infodir%g
s% mandir@%$mandir%g
s% INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s% INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s% INSTALL_DATA@%$INSTALL_DATA%g
s% PACKAGE@%$PACKAGE%g
s% VERSION@%$VERSION%g
s% ACLOCAL@%$ACLOCAL%g
s% AUTOCONF@%$AUTOCONF%g
s% AUTOMAKE@%$AUTOMAKE%g
s% AUTOHEADER@%$AUTOHEADER%g
s% MAKEINFO@%$MAKEINFO%g
s% SET_MAKE@%$SET_MAKE%g
s% MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s% MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s% MAINT@%$MAINT%g
s% INSIDE_GNOME_COMMON_TRUE@%$INSIDE_GNOME_COMMON_TRUE%g
s% INSIDE_GNOME_COMMON_FALSE@%$INSIDE_GNOME_COMMON_FALSE%g
s% XML_I18N_MERGE_OAF_RULE@%$XML_I18N_MERGE_OAF_RULE%g
s% XML_I18N_MERGE_KEYS_RULE@%$XML_I18N_MERGE_KEYS_RULE%g
s% XML_I18N_MERGE_DESKTOP_RULE@%$XML_I18N_MERGE_DESKTOP_RULE%g
s% XML_I18N_MERGE_DIRECTORY_RULE@%$XML_I18N_MERGE_DIRECTORY_RULE%g
s% XML_I18N_MERGE_SOUNDLIST_RULE@%$XML_I18N_MERGE_SOUNDLIST_RULE%g
s% XML_I18N_MERGE_PONG_RULE@%$XML_I18N_MERGE_PONG_RULE%g
s% XML_I18N_MERGE_XML_RULE@%$XML_I18N_MERGE_XML_RULE%g
s% XML_I18N_EXTRACT@%$XML_I18N_EXTRACT%g
s% XML_I18N_MERGE@%$XML_I18N_MERGE%g
s% XML_I18N_UPDATE@%$XML_I18N_UPDATE%g
s% XML_I18N_MERGE_SOUNDLIST_RULE@%$XML_I18N_MERGE_SOUNDLIST_RULE%g
s% XML_I18N_TOOLS_PERL@%$XML_I18N_TOOLS_PERL%g
s% CC@%$CC%g
s% CXX@%$CXX%g
s% CPP@%$CPP%g
s% XML_I18N_MERGE_OAF_RULE@%$XML_I18N_MERGE_OAF_RULE%g
s% XML_I18N_MERGE_KEYS_RULE@%$XML_I18N_MERGE_KEYS_RULE%g
s% XML_I18N_MERGE_DESKTOP_RULE@%$XML_I18N_MERGE_DESKTOP_RULE%g
s% XML_I18N_MERGE_DIRECTORY_RULE@%$XML_I18N_MERGE_DIRECTORY_RULE%g
s% XML_I18N_MERGE_SOUNDLIST_RULE@%$XML_I18N_MERGE_SOUNDLIST_RULE%g
s% XML_I18N_MERGE_PONG_RULE@%$XML_I18N_MERGE_PONG_RULE%g
s% XML_I18N_MERGE_XML_RULE@%$XML_I18N_MERGE_XML_RULE%g
s% XML_I18N_MERGE_SOUNDLIST_RULE@%$XML_I18N_MERGE_SOUNDLIST_RULE%g
s% host@%$host%g
s% host_alias@%$host_alias%g
s% host_cpu@%$host_cpu%g
s% host_vendor@%$host_vendor%g
s% host_os@%$host_os%g
s% build@%$build%g
s% build_alias@%$build_alias%g
s% build_cpu@%$build_cpu%g
s% build_vendor@%$build_vendor%g
s% build_os@%$build_os%g
s% RANLIB@%$RANLIB%g
s% LN_S@%$LN_S%g
s% LIBTOOL@%$LIBTOOL%g
s% GLIB_CONFIG@%$GLIB_CONFIG%g
s% GLIB_CFLAGS@%$GLIB_CFLAGS%g
s% GLIB_LIBS@%$GLIB_LIBS%g
s% GTK_CONFIG@%$GTK_CONFIG%g
s% GTK_CFLAGS@%$GTK_CFLAGS%g
s% GTK_LIBS@%$GTK_LIBS%g
s% GNOME_CONFIG@%$GNOME_CONFIG%g
s% BONOBO_CFLAGS@%$BONOBO_CFLAGS%g
s% BONOBO_LIBS@%$BONOBO_LIBS%g
s% GTKDOC@%$GTKDOC%g
s% HAVE_GTK_DOC_TRUE@%$HAVE_GTK_DOC_TRUE%g
s% HAVE_GTK_DOC_FALSE@%$HAVE_GTK_DOC_FALSE%g
s% HAVE_GTK_DOC@%$HAVE_GTK_DOC%g
s% ENABLE_GTK_DOC_TRUE@%$ENABLE_GTK_DOC_TRUE%g
s% ENABLE_GTK_DOC_FALSE@%$ENABLE_GTK_DOC_FALSE%g
s% ODBC_TRUE@%$ODBC_TRUE%g
s% ODBC_FALSE@%$ODBC_FALSE%g
s% MYSQL_TRUE@%$MYSQL_TRUE%g
s% MYSQL_FALSE@%$MYSQL_FALSE%g
s% POSTGRES_TRUE@%$POSTGRES_TRUE%g
s% POSTGRES_FALSE@%$POSTGRES_FALSE%g
s% PRIMEBASE_TRUE@%$PRIMEBASE_TRUE%g
s% PRIMEBASE_FALSE@%$PRIMEBASE_FALSE%g
s% TDS_TRUE@%$TDS_TRUE%g
s% TDS_FALSE@%$TDS_FALSE%g
s% SYBASE_TRUE@%$SYBASE_TRUE%g
s% SYBASE_FALSE@%$SYBASE_FALSE%g
s% LDAP_TRUE@%$LDAP_TRUE%g
s% LDAP_FALSE@%$LDAP_FALSE%g
s% ORACLE_TRUE@%$ORACLE_TRUE%g
s% ORACLE_FALSE@%$ORACLE_FALSE%g
s% INTERBASE_TRUE@%$INTERBASE_TRUE%g
s% INTERBASE_FALSE@%$INTERBASE_FALSE%g
s% MDB_TRUE@%$MDB_TRUE%g
s% MDB_FALSE@%$MDB_FALSE%g
s% MAIL_TRUE@%$MAIL_TRUE%g
s% MAIL_FALSE@%$MAIL_FALSE%g
s% ALLOCA@%$ALLOCA%g
s% USE_NLS@%$USE_NLS%g
s% MSGFMT@%$MSGFMT%g
s% GMSGFMT@%$GMSGFMT%g
s% XGETTEXT@%$XGETTEXT%g
s% GENCAT@%$GENCAT%g
s% BUILD_INCLUDED_LIBINTL@%$BUILD_INCLUDED_LIBINTL%g
s% USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
s% CATALOGS@%$CATALOGS%g
s% CATOBJEXT@%$CATOBJEXT%g
s% DATADIRNAME@%$DATADIRNAME%g
s% GMOFILES@%$GMOFILES%g
s% INSTOBJEXT@%$INSTOBJEXT%g
s% INTLDEPS@%$INTLDEPS%g
s% INTLLIBS@%$INTLLIBS%g
s% INTLOBJS@%$INTLOBJS%g
s% POFILES@%$POFILES%g
s% POSUB@%$POSUB%g
s% INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
s% GT_NO@%$GT_NO%g
s% GT_YES@%$GT_YES%g
s% MKINSTALLDIRS@%$MKINSTALLDIRS%g
s% l@%$l%g
s% IDL_FLAGS@%$IDL_FLAGS%g
s% GDA_CLIENT_LIBS@%$GDA_CLIENT_LIBS%g
s% GDA_CLIENT_CFLAGS@%$GDA_CLIENT_CFLAGS%g
s% GDA_PROVIDER_LIBS@%$GDA_PROVIDER_LIBS%g
s% GDA_PROVIDER_CFLAGS@%$GDA_PROVIDER_CFLAGS%g
s% ODBC_LIBS@%$ODBC_LIBS%g
s% ODBC_CFLAGS@%$ODBC_CFLAGS%g
s% MYSQL_LIBS@%$MYSQL_LIBS%g
s% MYSQL_CFLAGS@%$MYSQL_CFLAGS%g
s% POSTGRES_LIBS@%$POSTGRES_LIBS%g
s% POSTGRES_CFLAGS@%$POSTGRES_CFLAGS%g
s% PRIMEBASE_LIBS@%$PRIMEBASE_LIBS%g
s% PRIMEBASE_CFLAGS@%$PRIMEBASE_CFLAGS%g
s% TDS_LIBS@%$TDS_LIBS%g
s% TDS_CFLAGS@%$TDS_CFLAGS%g
s% SYBASE_LIBS@%$SYBASE_LIBS%g
s% SYBASE_CFLAGS@%$SYBASE_CFLAGS%g
s% LDAP_LIBS@%$LDAP_LIBS%g
s% LDAP_CFLAGS@%$LDAP_CFLAGS%g
s% ORACLE_LIBS@%$ORACLE_LIBS%g
s% ORACLE_CFLAGS@%$ORACLE_CFLAGS%g
s% INTERBASE_LIBS@%$INTERBASE_LIBS%g
s% INTERBASE_CFLAGS@%$INTERBASE_CFLAGS%g
s% MDB_LIBS@%$MDB_LIBS%g
s% MDB_CFLAGS@%$MDB_CFLAGS%g
s% CAMEL_LIBS@%$CAMEL_LIBS%g
s% CAMEL_CFLAGS@%$CAMEL_CFLAGS%g
s% XML_LIBS@%$XML_LIBS%g
s% XML_CFLAGS@%$XML_CFLAGS%g
s% ORBIT_IDL@%$ORBIT_IDL%g
s% GDA_oafdir@%$GDA_oafdir%g
CEOF
EOF
cat >> $CONFIG_STATUS <<\EOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile
libgda.spec
macros/Makefile
po/Makefile.in
intl/Makefile
idl/Makefile
lib/Makefile
lib/gda-common/Makefile
lib/gda-client/Makefile
lib/gda-server/Makefile
bindings/Makefile
bindings/c++/Makefile
providers/Makefile
providers/gda-default-server/Makefile
providers/gda-odbc-server/Makefile
providers/gda-mysql-server/Makefile
providers/gda-postgres-server/Makefile
providers/gda-primebase-server/Makefile
providers/gda-sybase-server/Makefile
providers/gda-tds-server/Makefile
providers/gda-ldap-server/Makefile
providers/gda-oracle-server/Makefile
providers/gda-interbase-server/Makefile
providers/gda-mdb-server/Makefile
providers/gda-mail-server/Makefile
tools/Makefile
tools/gda-config
tools/gda-buildserver
tools/gda-buildclient
tools/templates/Makefile
testing/Makefile
doc/Makefile
doc/es/Makefile
doc/C/Makefile
doc/C/reference/Makefile
doc/C/reference/libgda-common/Makefile
doc/C/reference/libgda-client/Makefile
doc/pt_BR/Makefile
stamp.h
"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
case "$ac_given_INSTALL" in
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s% configure_input@%$configure_input%g
s% srcdir@%$srcdir%g
s% top_srcdir@%$top_srcdir%g
s% INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='\([ ]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'
if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_HEADERS="config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
cat $ac_file_inputs > conftest.in
EOF
# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h. And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
rm -f conftest.tail
while :
do
ac_lines=`grep -c . conftest.vals`
# grep -c gives empty output for an empty file on some AIX systems.
if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
# Write a limited-size here document to conftest.frag.
echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
echo 'CEOF
sed -f conftest.frag conftest.in > conftest.out
rm -f conftest.in
mv conftest.out conftest.in
' >> $CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
rm -f conftest.vals
mv conftest.tail conftest.vals
done
rm -f conftest.vals
cat >> $CONFIG_STATUS <<\EOF
rm -f conftest.frag conftest.h
echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
cat conftest.in >> conftest.h
rm -f conftest.in
if cmp -s $ac_file conftest.h 2>/dev/null; then
echo "$ac_file is unchanged"
rm -f conftest.h
else
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
fi
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
EOF
cat >> $CONFIG_STATUS <<EOF
ac_sources="$nls_cv_header_libgt"
ac_dests="$nls_cv_header_intl"
EOF
cat >> $CONFIG_STATUS <<\EOF
srcdir=$ac_given_srcdir
while test -n "$ac_sources"; do
set $ac_dests; ac_dest=$1; shift; ac_dests=$*
set $ac_sources; ac_source=$1; shift; ac_sources=$*
echo "linking $srcdir/$ac_source to $ac_dest"
if test ! -r $srcdir/$ac_source; then
{ echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
fi
rm -f $ac_dest
# Make relative symlinks.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
# The dest file is in a subdirectory.
test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dest_dir_suffix.
ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dest_dir_suffix= ac_dots=
fi
case "$srcdir" in
[/$]*) ac_rel_source="$srcdir/$ac_source" ;;
*) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
esac
# Make a symlink if possible; otherwise try a hard link.
if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
ln $srcdir/$ac_source $ac_dest; then :
else
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
EOF
cat >> $CONFIG_STATUS <<EOF
XML_I18N_TOOLS_PERL=${XML_I18N_TOOLS_PERL}
XML_I18N_TOOLS_PERL=${XML_I18N_TOOLS_PERL}
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${ac_given_srcdir}/xml-i18n-extract.in > xml-i18n-extract;
chmod ugo+x xml-i18n-extract;
chmod u+w xml-i18n-extract;
sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${ac_given_srcdir}/xml-i18n-merge.in > xml-i18n-merge;
chmod ugo+x xml-i18n-merge;
chmod u+w xml-i18n-merge;
sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${ac_given_srcdir}/xml-i18n-update.in > xml-i18n-update;
chmod ugo+x xml-i18n-update;
chmod u+w xml-i18n-update;
sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${ac_given_srcdir}/xml-i18n-extract.in > xml-i18n-extract;
chmod ugo+x xml-i18n-extract;
chmod u+w xml-i18n-extract;
sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${ac_given_srcdir}/xml-i18n-merge.in > xml-i18n-merge;
chmod ugo+x xml-i18n-merge;
chmod u+w xml-i18n-merge;
sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${ac_given_srcdir}/xml-i18n-update.in > xml-i18n-update;
chmod ugo+x xml-i18n-update;
chmod u+w xml-i18n-update;
case "$CONFIG_FILES" in *po/Makefile.in*)
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
esac
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
