Re: 'make' compilation error with gnopernicus

["Padraig O'Briain" <Padraig Obriain Sun COM>]

I noticed a recent (last few minutes) CVS commit which gets rid of errno in 
libbrl.

Perhaps this will cause the problem to go away.

Padraig

> Subject: Re: 'make' compilation error with gnopernicus
> To: malcolm commsecure com au, gnome-accessibility-list gnome org, 
dosferatu hotmail com
> Mime-Version: 1.0
> Content-MD5: rJ9JXzRHdLpzD4jrLQN9kQ==
> 
> errno should be in libc.so which ought to be linked in automatically.
> 
> It builds on Solaris. I have checked a Linux build and it does not have the 
> following at the end of the link line
> 
> -Wl,--rpath -Wl,/usr/local/lib
> 
> What do did specify in autogen.sh command?
> 
> Padraig
> 
> > 
> > Hey all,
> > 
> > Thanks for the quick responses.  Sorry about the lack of information.  Here 
> > is some more:
> > 
> > OS:
> > Redhat8.1 Beta5 "Phoebe"
> > Gnome version 2.2 - stack is located in /usr/share
> > 
> > Hardware:
> > 2.0 GHz/400fsb P4 Northwood Processor
> > Intel 845 Chipset planar
> > 40GB Maxtor Hard Drive
> > 128MB DDR-SDRAM
> > 48x cdrom
> > Intel 845 On Board video (sharing 8mb system ram through bios)
> > Intel ADI 1981 On Board audio
> > 
> > Device Drivers:
> > All device drivers are stock Redhat drivers
> > 
> > Here is a larger cut and paste from the 'make' output:
> > 
> > /bin/sh ../../mkinstalldirs /usr/local/include/gnopernicus-1.0/libbrl
> > /usr/bin/install -c -m 644 brlxmlapi.h 
> > /usr/local/include/gnopernicus-1.0/libbrl/brlxmlapi.h
> > make[3]: Leaving directory 
> > `/opt/gnopernicus_install_files/gnopernicus/braille/libbrl'
> > make[2]: Leaving directory 
> > `/opt/gnopernicus_install_files/gnopernicus/braille/libbrl'
> > Making install in test
> > make[2]: Entering directory 
> > `/opt/gnopernicus_install_files/gnopernicus/braille/test'
> > /bin/sh ../../libtool --mode=link gcc  -Wall -g  
> > -DGNOPERNICUSLOCALEDIR=\""/usr/local/share/locale"\"  -o tester  tester.o 
> > brlinp.o ../libbrl/libbrl.la ../../srutil/libsrutil.la 
> > ../../srconf/libsrconf/libsrconf.la -Wl,--export-dynamic -pthread 
> > -L/usr/local/lib -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 
> > -lgnomecanvas-2 -lgnome-2 -lart_lgpl_2 -lpangoft2-1.0 -lgtk-x11-2.0 
> > -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 
> > -lpango-1.0 -lbonobo-2 -lgconf-2 -lgnomevfs-2 -lbonobo-activation -lORBit-2 
> > -lgmodule-2.0 -ldl -llinc -lgobject-2.0 -lgthread-2.0 -lglib-2.0 -lxml2 -lz 
> > -lm   -lpopt
> > gcc -Wall -g -DGNOPERNICUSLOCALEDIR=\"/usr/local/share/locale\" -o 
> > .libs/tester tester.o brlinp.o -Wl,--export-dynamic -pthread  
> > ../libbrl/.libs/libbrl.so -L/opt/gnome-2.0/lib 
> > ../../srutil/.libs/libsrutil.so -L/usr/X11R6/lib 
> > ../../srconf/libsrconf/.libs/libsrconf.so /usr/local/lib/libcspi.so 
> > /usr/local/lib/libspi.so -lX11 /usr/lib/libgailutil.so -lXtst 
> > -L/usr/local/lib /usr/local/lib/libgnomeui-2.so /usr/lib/libjpeg.so -lSM 
> > -lICE -lbonoboui-2 -lgnomecanvas-2 /usr/local/lib/libgnome-2.so 
> > /usr/lib/libxml2.so -lesd -laudiofile -lart_lgpl_2 -lpangoft2-1.0 
> > /usr/local/lib/libgtk-x11-2.0.so /usr/local/lib/libgdk-x11-2.0.so -latk-1.0 
> > /usr/local/lib/libgdk_pixbuf-2.0.so -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 
> > -lbonobo-2 /usr/local/lib/libgconf-2.so
> > -lgnomevfs-2 -lbonobo-activation -lORBit-2 /usr/local/lib/libgmodule-2.0.so 
> > -ldl /usr/lib/liblinc.so /usr/local/lib/libgobject-2.0.so 
> > /usr/local/lib/libgthread-2.0.so -lpthread /usr/local/lib/libglib-2.0.so 
> > /usr/local/lib/libxml2.so -lz -lm /usr/lib/libpopt.so -Wl,--rpath 
> > -Wl,/usr/local/lib/gnopernicus-1.0 -Wl,--rpath -Wl,/usr/local/lib
> > ../libbrl/.libs/libbrl.so: undefined reference to `errno'
> > collect2: ld returned 1 exit status
> > make[2]: *** [tester] Error 1
> > make[2]: Leaving directory 
> > `/opt/gnopernicus_install_files/gnopernicus/braille/test'
> > make[1]: *** [install-recursive] Error 1
> > make[1]: Leaving directory 
> > `/opt/gnopernicus_install_files/gnopernicus/braille'
> > make: *** [install-recursive] Error 1
> > 
> > 
> > Please let me know if this is enough information.  Thanks for all the input.
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > _________________________________________________________________
> > STOP MORE SPAM with the new MSN 8 and get 2 months FREE*  
> > http://join.msn.com/?page=features/junkmail
> > 
> > _______________________________________________
> > gnome-accessibility-list mailing list
> > gnome-accessibility-list gnome org
> > http://mail.gnome.org/mailman/listinfo/gnome-accessibility-list