[Glade-devel] gdk_x_error on solaris 10

[tcs.jain at gmail.com (neha jain)]

  Hi,

Need help in finding the solution to the following problem :

I am trying to evoke a glade application on Solaris 10 ( glade-2 ), and
facing the following error:


Error :

           The program '' received an X Window System error.
           This probably reflects a bug in the program.
           The error was 'BadLength (poly request too large or internal Xlib
length erro'.
           (Details: serial 12 error_code 16 request_code 155 minor_code 4)
           (Note to programmers: normally, X errors are reported
asynchronously;
           that is, you will receive the error a while after causing it.
           To debug your program, run it with the --sync command line
           option to change this behavior. You can then get a meaningful
           backtrace from your debugger if you break on the gdk_x_error()
function.)


  Also I tried running this application using the dbx debugger and stopped
at the _XError to get the following backtrace:

    (dbx) stop in main
    (dbx) stop in _XError
    dbx: warning: '_XError' has no debugger info -- will trigger on first
instruction
     dbx:   stop in _XError
   (dbx) stop in gnome_init
    dbx: "gnome_init" is not defined as a function or procedure in the scope
`tablist`main.C`main`
   dbx: see `help scope' for details
   (dbx) run $RUN
   Running: tablist -featureClass PTWPRO
   t at 1 (l at 1) stopped in main at 0x000d36e8
   0x000d36e8: main : save %sp, -1256, %sp
  (dbx) cont
   t at 1 (l at 1) stopped in _XError at 0xfd4bdc8c
   0xfd4bdc8c: _XError : save %sp, -192, %sp
  (dbx) where




current thread: t at 1

=>[1] _XError(0x8cf0e0, 0x8d0ed8, 0x8cea04, 0x10, 0x0, 0x8cf0e0), at
0xfd4bdc8c

   [2] _XReply(0x8cf0e0, 0x8d0ed8, 0x6b, 0x0, 0x0, 0x20), at 0xfd49e208

  [3] XGetXineramaInfo(0x8cf0e0, 0x0, 0x145, 0x8d0d08, 0x8d0ed8, 0x8ce440),
at 0xfa453740

  [4] XineramaGetInfo(0x8cf0e0, 0x0, 0xffbfebd0, 0xffbfebc0, 0x2, 0x8d0d08),
at 0xfa4535b4

  [5] check_solaris_xinerama(0x8d0b10, 0xfd3fed14, 0x2b9b8, 0xfd49f300,
0xffbfecb4, 0x0), at 0xfd3d33a8

 [6] init_xinerama_support(0x8d0b10, 0x0, 0x2b88c, 0xfbd6ce70, 0x0, 0x1), at
0xfd3d34d8

 [7] _gdk_x11_screen_new(0x8cf938, 0x0, 0x0, 0x2ba64, 0x0, 0xfd3fed14), at
0xfd3d332c

 [8] gdk_display_open(0x0, 0x8cf938, 0x8cf0e0, 0x0, 0x1, 0xfd3fed14), at
0xfd3b8c00

 [9] gdk_display_open_default_libgtk_only(0x0, 0x69cf4, 0xfc0e98a4, 0x0,
0xfd3fed14, 0x3c), at 0xfd3950b0

 [10] gtk_init_check(0xffbfef5c, 0xffbfef58, 0x0, 0x0, 0x0, 0x0), at
0xfbf2a3ac

 [11] gtk_init(0xffbfef5c, 0xffbfef58, 0xfbda8800, 0x1b4900, 0x0,
0xfc0decd0), at 0xfbf2a3e8

 [12] bonobo_ui_gtk_post_args_parse(0x8ca2d0, 0x32c, 0x4c650, 0x0,
0xfbbf0588, 0x8c7a58), at 0xfbba3fa4

 [13] gnome_program_postinit(0x8ca2d0, 0x0, 0x1673c, 0xfd43402c, 0x6f7854,
0xfd433a0c), at 0xfd41d3c8

 [14] gnome_program_initv(0x8ca2d0, 0x14522e, 0x145234, 0x1, 0x1,
0xffbff5fc), at 0xfd41d850

 [15] gnome_program_init(0x14522e, 0x145234, 0xfbcaa52c, 0x1, 0xffbff5fc,
0xfbc91eec), at 0xfd41d438

 [16] gnome_init_with_popt_table(0x14522e, 0x145234, 0x1, 0xffbff5fc, 0x0,
0x0), at 0xfbc5a3e0

 [17] main(0x3, 0xffbff674, 0xffbff684, 0x168c00, 0xf97c0fc0, 0xf97c1000),
at 0xd378c

(dbx)



   FYI, the piece of code which is calling the function gnome_init is:

    int main(int argc, char *argv[]) {
    GladeXML *xml;
    poptContext ctx;
    char *args[2] = {"",""};
    int i;
    wellID            wellid;
    char             *wellName[2];
    long              ier;
    LsdDialog        *well_select;

    char *configfile = NULL;
    char *wellfile = NULL;
    char *lsdtype = NULL;
    int daemon_mode = 0;
    int keepalive = 0;
    int pid = 0;
    char *fullpath;
    char command[1024];
    GdkWindow *Gwin;
    Window  win;
    GtkWidget *gwid;
    Display *xdis;
    Display *xdis2;
    TabOW *Tabow = new TabOW(&argc, argv);
    gnome_init("tabui", "0.0.1",1,args);
    glade_gnome_init();
    glade_init_subtree_widgets();
   fullpath = ptw_get_file_path("gtk.rc");


Kindly suggest what can be the possible reason for this error and how to
proceed further to solve it.

  Thanks in advance.

   Neha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ximian.com/pipermail/glade-devel/attachments/20070411/d869fa22/attachment.html