Dear Alexandre and Jehan:
My tablet is "np10 10.1 tablet PC" :
http://www.yiynova.com/En/proddetails.php?proid=8&clsid=4?%3E
I am a Debian Linux user, the tablet screen and pen was well supported by Linux kernel (3.2.0) and Xorg(1.12.1.902), I posted the /var/log/Xorg.0.log at the end of this mail.
I had checked the setting in Input device, the input device (pen) of this tablet had been set as "Screen" mode, and I can drawing with pen pressure, So I think the tablet and pen was enabled in Gimp.
In Gimp 2.4.7, this "No response" problem only happened in the second time I opened and tried to type filename in "Save dialog". The reproduce procedure is:
(1) File > New > Creat a new Image
(2) Draw anything on the image and Save it as XXX.xcf by clicking virtul keyboard on screen with tablet pen. Everything is OK so far.
(3) Clicking "File > Save as" with then pen, then you will see the "Save as" dialog do not accept any clicking or operation form the tablet pen, but the "Save as" dialog still accepted other input like usb keyboard or mouse if they were available.
Besides, I found, in Gimp-2.6, "sometimes" the toolbox became "unclickable" for tablet pen, but drawing in the image window with the tablet pen still worked fine at the same time. It happened randomly, I cannot find the rule so far. After searching on Google, I guess this gimp-2.6 problem is similar to this bug report:
https://bugs.launchpad.net/ubuntu/+source/gimp/+bug/556670Do I need to offer any information?
Thank you so much :)
Regards,
Minhsien
---
The following information of this tablet device in /var/log/Xorg.0.log was:
[ 14.811] (II) config/udev: Adding input device WALTOP Tablet (/dev/input/event1)
[ 14.811] (**) WALTOP Tablet : Applying InputClass "evdev tablet catchall"
[ 14.811] (II) Using input driver 'evdev' for ' WALTOP Tablet '
[ 14.811] (**) WALTOP Tablet : always reports core events
[ 14.811] (**) evdev: WALTOP Tablet : Device: "/dev/input/event1"
[ 14.811] (--) evdev: WALTOP Tablet : Vendor 0x172f Product 0x5a
[ 14.811] (--) evdev: WALTOP Tablet : Found 1 mouse buttons
[ 14.811] (--) evdev: WALTOP Tablet : Found absolute axes
[ 14.811] (--) evdev: WALTOP Tablet : Found x and y absolute axes
[ 14.811] (--) evdev: WALTOP Tablet : Found absolute tablet.
[ 14.811] (II) evdev: WALTOP Tablet : Configuring as tablet
[ 14.811] (**) evdev: WALTOP Tablet : YAxisMapping: buttons 4 and 5
[ 14.811] (**) evdev: WALTOP Tablet : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.811] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/event1"
[ 14.811] (II) XINPUT: Adding extended input device " WALTOP Tablet " (type: TABLET, id 10)
[ 14.812] (II) evdev: WALTOP Tablet : initialized for absolute axes.
[ 14.812] (**) WALTOP Tablet : (accel) keeping acceleration scheme 1
[ 14.812] (**) WALTOP Tablet : (accel) acceleration profile 0
[ 14.812] (**) WALTOP Tablet : (accel) acceleration factor: 2.000
[ 14.812] (**) WALTOP Tablet : (accel) acceleration threshold: 4
[ 14.813] (II) config/udev: Adding input device WALTOP Tablet (/dev/input/mouse0)
