Re: Problem building garnome 0.24.2 on Solaris 9 - HELP needed

[Eric Damphousse <ericdamphousse darwingroup net>]

Hey Bob..... very good! I am running the Solaris one. I have SOlaris 9 and
thought the -C is documented in the man, it complains when I try using it.
I will go and get the GNU tar and try that out.

Thanks


Bob Kashani wrote:
> On Fri, 2003-06-06 at 13:10, Eric Damphousse wrote:
> > Again, another error....
> >
> > It seems to me that the bunzip2 thing aint working right. This error
> > looks strangely like the other I previously mentionned. In this case,
> > the pkgconfig-0.15.0 directory was empty, and therefore, could not run
> > the .configure. I manually bunzip and untar and the .configure ran. 
> >   
>
> Are you using GNU tar or the Solaris tar? Check to see whether the tar
> that you're using accepts the -C option? -C --> change to directory DIR.
> I just checked Sun OS 5.8 (Solaris 8) and it doesn't recognize the -C
> option.
>
> Bob
>
> > make[6]: Entering directory
> > `/home/ericd/Projects/garnome-0.24.2/bootstrap/pkgconfig'
> > --15:41:34-- 
> > http://ftp.gnome.org/pub/GNOME/sources/pkgconfig/0.15/pkgconfig-0.15.0.tar.bz2
> >            => `download/partial/pkgconfig-0.15.0.tar.bz2'
> > Resolving ftp.gnome.org... done.
> > Connecting to ftp.gnome.org[130.239.18.173]:80... connected.
> > HTTP request sent, awaiting response... 200 OK
> > Length: 490,351 [application/x-tar]
> >
> > 100%[====================================================>]
> > 490,351      151.87K/s    ETA 00:00
> >
> > 15:41:37 (151.87 KB/s) - `download/partial/pkgconfig-0.15.0.tar.bz2'
> > saved [490351/490351]
> >
> > make[6]: Leaving directory
> > `/home/ericd/Projects/garnome-0.24.2/bootstrap/pkgconfig'
> >     [fetch] complete for pkgconfig.
> >  ==> Running checksum on pkgconfig-0.15.0.tar.bz2
> > 8e3f44717a76069fcc8fdae9c252369b  download/pkgconfig-0.15.0.tar.bz2
> > /bin/sh: md5sum: not found
> > file pkgconfig-0.15.0.tar.bz2 passes checksum test!
> >     [checksum] complete for pkgconfig.
> > install -d work/main.d
> >  ==> Extracting download/pkgconfig-0.15.0.tar.bz2
> >     [extract] complete for pkgconfig.
> > install -d work/main.d/pkgconfig-0.15.0
> >     [patch] complete for pkgconfig.
> >  ==> Running configure in work/main.d/pkgconfig-0.15.0
> > /bin/sh: ./configure: not found
> >
> > I now have a another problem... ie:
> >
> > configure: error: I can't find the libraries for the thread
> > implementation
> > posix. Please choose another thread implementation or
> > provide information on your thread implementation.
> > You can also run 'configure --disable-threads' 
> > to compile without thread support.
> >
> > But my guess, its another set of problems, unrelated to the first one.
> >
> > Eric Damphousse wrote:
> > > Found out a few interesting things:
> > >
> > > If I manually gunzip2 | tar xvf the gtk+-2.2.1 file then rerun the
> > > make... I still get the previously noted msg, but this time, if I
> > > specified the full path of the file it wants to diff, ie:
> > > gtk+-2.2.1/gtk/gtkstyle.c, then it works, but complains about the
> > > next file its trying to diff.
> > >
> > > So, I could potentially make this work, but I doubt very much that
> > > this is the way it has been planned.
> > >
> > > Any ideas?
> > >
> > > Eric
> > >
> > > Eric Damphousse wrote:
> > > > Ok,
> > > >
> > > > You have assumed right, garnome uses recent GAR. I have tried both
> > > > methods you have specified, and the problem now is as such:
> > > >
> > > >  ==> Applying patch download/insensitive-iain.diff
> > > > can't find file to patch at input line 4
> > > > Perhaps you used the wrong -p or --strip option?
> > > > The text leading up to this was:
> > > > --------------------------
> > > > |diff --speed-large-files --minimal -Nru gtk+-2.2.1/gtk/gtkstyle.c
> > > > gtk+-2.2.1/gtk/gtkstyle.c
> > > > |--- gtk+-2.2.1/gtk/gtkstyle.c    2003-01-31 15:42:34.000000000
> > > > +1100
> > > > |+++ gtk+-2.2.1/gtk/gtkstyle.c    2003-02-08 08:11:30.000000000
> > > > +1100
> > > > --------------------------
> > > > File to patch: "it expects something from me,"
> > > >
> > > > Any clues,,,
> > > >
> > > > I will do my googleing to see if anyone else had those issues....
> > > >
> > > >
> > > > Eric Damphousse wrote:
> > > > > Will do!... and thanks
> > > > >
> > > > > Nick Moffitt wrote:
> > > > > > begin  Eric Damphousse  quotation:
> > > > > >   
> > > > > > >  You either have to fix gar.conf.mk to use gpatch,
> > > > > > >  >or symlink /usr/bin/gpatch to "some path/patch" such
> > > > > > >  >that "some path" is in front of /usr/bin, which is
> > > > > > >  >where the patch binary you're getting output from
> > > > > > >  >is.  I assume you're trying to build on Solaris.
> > > > > > >     
> > > > > > >             
> > > > > > 	Yeah, that's a likely culprit.  
> > > > > >
> > > > > > First of all, make sure you install GNU patch.
> > > > > >
> > > > > > Second, I'm assuming garnome 0.24.2 (242 sighting!) uses recent GAR,
> > > > > > which has the following at about line 204 of gar.lib.mk:
> > > > > >
> > > > > > PATCHDIR ?= $(WORKDIR)
> > > > > > PATCHDIRLEVEL ?= 1
> > > > > > PATCHDIRFUZZ ?= 2
> > > > > > GARPATCH = patch -d$(PATCHDIR) -p$(PATCHDIRLEVEL) -F$(PATCHDIRFUZZ)
> > > > > >
> > > > > > 	if this is so, then you can do:
> > > > > >
> > > > > > make GARPATCH='/usr/bin/gpatch -d$(PATCHDIR) -p$(PATCHDIRLEVEL) -F$(PATCHDIRFUZZ)' install
> > > > > >
> > > > > > and the patch rules will use the new patch utility.  Barring that,
> > > > > > just edit gar.lib.mk and swap in the location for GNU patch wherever
> > > > > > you have the system calling the raw "patch" executable.
> > > > > >
> > > > > >   
> > > > > >           
> > > > >         
> > > >       
> > >     
> >