gst-plugins-base 1.12.3

[Sebastian Dröge <install-module master gnome org>]

ChangeLog
=========

2017-09-18  Sebastian Dröge <slomo coaxion net>

        * configure.ac:
          releasing 1.12.3

2017-09-18 16:00:48 +0300  Sebastian Dröge <sebastian centricular com>

        * po/cs.po:
          po: Update translations

2017-07-25 12:37:19 -0400  Thibault Saunier <thibault saunier osg samsung com>

        * gst/audioconvert/gstaudioconvert.c:
          audioconvert: Consider channel=1, channel-mask=0x0 as mono
          channels=1 is always mono, having it 'unpositioned' does not make
          sense.
          This fixes pipeline such as:
          gst-validate-1.0 audiotestsrc ! audio/x-raw,channels=2,rate=44100,layout=interleaved ! audioconvert 
! audioresample ! audio/x-raw, rate=44100, channels=1 ! avenc_mp2 ! fakesink
          https://bugzilla.gnome.org/show_bug.cgi?id=785407

2017-08-20 12:09:52 +0200  Mark Nauwelaerts <mnauw users sourceforge net>

        * gst/playback/gstplaybin2.c:
          playbin: ref_sink() sink rather than pointer to sink

2017-08-17 12:13:38 +0100  Tim-Philipp Müller <tim centricular com>

        * README:
        * common:
          Automatic update of common submodule
          From 48a5d85 to dd9d403

2016-09-09 10:29:01 +0900  Seungha Yang <sh yang lge com>

        * gst/playback/gstdecodebin3.c:
          decodebin3: Don't send duplicated stream-start event
          group-id in stream-start event might be updated in
          parse_chain_output_probe (). This cause duplicated stream-start
          twice with identical stream-id and seq-num, but only group-id is
          different. Although there is no change, stream-start event will
          be followed by the first buffer.
          https://bugzilla.gnome.org/show_bug.cgi?id=771088

2017-01-25 19:20:44 +0900  Seungha Yang <sh yang lge com>

        * gst/playback/gsturisourcebin.c:
          urisourcebin: Push EOS if slot is still eos state
          linked input of slot can be old input, so urisourcebin should check
          eos state to figure out whether it's new one or not.
          If not, urisourcebin never ever forwards EOS to downstream at the end
          of presentation, because the old input is still there without removal
          https://bugzilla.gnome.org/show_bug.cgi?id=777735

2017-08-09 16:23:03 +0200  Edward Hervey <edward centricular com>

        * gst/playback/gstdecodebin3-parse.c:
        * gst/playback/gstdecodebin3.c:
        * gst/playback/gsturisourcebin.c:
          decodebin3/urisourcebin: Switch to actual EOS events internally
          Use the intended sequence for re-using elements:
          * EOS
          * STREAM_START if element is to be re-used
          This avoids having elements (such as queue/multiqueue/queue2) not
          properly resetting themselves.
          When delaying EOS propagation (because we want to wait until all
          streams of a group are done for example), we re-trigger them by
          first sending the cached STREAM_START and then EOS (which will
          cause elements to re-set themselves if needed and accept new
          buffers/events).
          https://bugzilla.gnome.org/show_bug.cgi?id=785951

2017-01-25 19:51:17 +0900  Seungha Yang <sh yang lge com>

        * gst/playback/gstdecodebin3.c:
          decodebin3: Push EOS to output stream if they are all drained
          decodebin3 checks input streams and pushes EOS if all input streams
          are EOSed. If not, fake EOS is pushed to the corresponding slot.
          When adaptivedemux is used with multi-track configuration,
          adaptivedemux never ever push EOS to non-selected track
          because streaming thread for the slot stops with not-linked flow return.
          So, decodebin3 should generate EOS itself to finish playback.
          https://bugzilla.gnome.org/show_bug.cgi?id=777735

2017-08-12 15:46:28 +0100  Philippe Normand <philn igalia com>

        * gst-libs/gst/app/gstappsrc.c:
          appsrc: handle duration query only if the property was set
          https://bugzilla.gnome.org/show_bug.cgi?id=786200

2017-08-08 20:35:25 +0200  Mark Nauwelaerts <mnauw users sourceforge net>

        * gst-libs/gst/audio/gstaudioencoder.c:
          audioencoder: also adjust sample count upon discont to avoid ts overflow
          Only adjusting the base_ts might lead to a negative ts and as such integer
          overflow into a huge timestamp which then propagates into the granulepos
          and so on.  Instead, resync to incoming buffer timestamp using both base_ts
          and sample count rather than only base_ts.
          Fixes https://bugzilla.gnome.org/show_bug.cgi?id=785948

2017-08-07 15:27:45 +0300  Sebastian Dröge <sebastian centricular com>

        * gst/playback/gstplaybin2.c:
          playbin: Make sure to ref_sink() any sinks before calling activate_sink()
          It is forwarding messages to the playbin bus, thus forwarding messages
          that contain a floating reference to the application. This generally
          makes bindings unhappy, we must not leak floating references to them.

2017-08-04 13:39:04 +0300  Sebastian Dröge <sebastian centricular com>

        * gst-libs/gst/tag/gstxmptag.c:
          xmptag: Stop parsing GPS coordinate if sscanf() fails
          CID 1139610

2017-07-24 16:48:17 +0300  Sebastian Dröge <sebastian centricular com>

        * gst-libs/gst/video/gstvideodecoder.c:
          videodecoder: Make sure we have an actually writable buffer when modifying metadata
          avviddec keeps references to the buffers internally for example, in
          which case we need to do a shallow copy of the buffer.

2017-07-24 19:18:49 +0530  Satya Prakash Gupta <sp gupta samsung com>

        * gst-libs/gst/video/gstvideofilter.c:
          videofilter: Unmap input frame if mapping output frame failed
          https://bugzilla.gnome.org/show_bug.cgi?id=785341

2017-07-24 16:29:53 +0300  Sebastian Dröge <sebastian centricular com>

        * gst-libs/gst/video/gstvideometa.c:
          videometa: Don't crash if adding the timecode meta to a buffer failed

2017-07-24 13:23:17 +0530  Satya Prakash Gupta <sp gupta samsung com>

        * gst/subparse/gstssaparse.c:
          ssaparse: Fix buffer leak in error case
          https://bugzilla.gnome.org/show_bug.cgi?id=785331

2017-07-19 09:02:26 +0530  Satya Prakash Gupta <sp gupta samsung com>

        * gst/encoding/gstencodebin.c:
          encodebin: fix possible pad ref leak in error code path
          https://bugzilla.gnome.org/show_bug.cgi?id=785065



Download
========
https://download.gnome.org/sources/gst-plugins-base/1.12/gst-plugins-base-1.12.3.tar.xz (2.97M)
  sha256sum: d3d37b8489d37fa0018973d850bd2067b98af335fef2fa543ee7d40359e3cea5