gst-plugins-good 1.10.5


2017-06-15  Sebastian Dröge <slomo coaxion net>

          releasing 1.10.5

2017-06-15 11:50:44 +0300  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/atoms.c:
          qtmux: Un-merge the last two stsc entries after serializing
          The last entry will most likely get new samples added to it in "robust"
          muxing mode, changing the samples_per_chunk and thus making it wrong to
          keep the last two entries merged. It will run into an assertion later
          when adding a new sample to the chunk.
          Thanks to gdiener cardinalpeak com for the analysis of the bug and
          proposal for a solution.

2017-06-14 00:09:25 +0300  Sebastian Dröge <sebastian centricular com>

        * gst/wavparse/gstwavparse.c:
          wavparse: Actually clip to upstream size instead of size of the data chunk
          There might be other chunks after the data chunk, so clipping the chunk
          size with the data size can lead to a negative number and all following
          calculations go wrong and cause crashes or worse.
          This was introduced in 3ac119bbe2c360e28c087cf3852ea769d611b120.

2017-03-22 18:52:51 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/gstqtmux.c:
        * gst/isomp4/gstqtmux.h:
          qtmux: Do timecode handling per track, not per muxer instance
          There could be multiple video tracks with timecodes.

2017-04-04 15:07:40 +0300  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/gstqtmux.c:
          qtmux: Error out immediately if a timecode is to be written but downstream return not-OK

2017-05-16 12:56:15 +0300  Vivia Nikolaidou <vivia ahiru eu>

        * gst/isomp4/gstqtmux.c:
          qtmux: Do not check timecode data for mp4 container
          Timecode trak is only supported for mov right now, not for mp4. That
          code would otherwise create an invalid trak if the muxed video contained
          timecode metadata.

2017-05-08 18:22:48 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/qtdemux.c:
          Revert "qtdemux: Fix leak on QtDemuxStreamStsdEntry"
          This reverts commit 6578c44a92a92b922ef45871097eb60831807173.
          This commit is not relevant for 1.10.

2017-05-08 18:22:12 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/qtdemux.c:
          Revert "qtdemux: Fix crash on mss stream caused by invalid stsd entry access"
          This reverts commit 84cb0852e1184176ab953bda459b811a050dfcd1.
          It actually requires further changes to qtdemux.

2017-04-14 13:38:53 +0300  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/atoms.c:
          qtmux: Fix timescale of timecode tracks
          They should have ideally the same timescale of the video track, which we
          can't guarantee here as in theory timecode configuration and video
          framerate could be different. However we should set a correct timescale
          based on the framerate given in the timecode configuration, and not just
          use the framerate numerator.
          Different than the 1.12 version of the patch, this uses the previous,
          suboptimal calculation of the timescale for video tracks to be
          consistent with the video track.

2017-05-02 10:32:30 +0900  Seungha Yang <sh yang lge com>

        * gst/isomp4/qtdemux.c:
          qtdemux: Fix crash on mss stream caused by invalid stsd entry access
          Since mss has no moov, default stsd entry should be created with media-caps.

2017-04-25 17:11:27 +0300  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/qtdemux.c:
          qtdemux: Don't perform seeks with inconsistent seek values
          If gst_segment_do_seek() fails, we shouldn't try seeking on that
          resulting segment but just error out. Crashes further down the line

2017-04-21 19:09:14 +0100  Sebastian Dröge <sebastian centricular com>

        * gst/rtsp/gstrtspsrc.c:
          rtspsrc: Chain up to the parent class' provide_clock() implementation
          If no clock was provided directly by rtspsrc. This behaviour was removed
          by f8013487c91a6ffc552a4b25aa1a70f0bd5377f8 and results in rtspsrc not
          providing the system clock via the rtpjitterbuffer.
          As a result, if another element like an audio sink, provides a clock,
          the pipeline would select that (when going to PAUSED/PLAYING again later).
          Audio clocks usually don't progress in PAUSED, and thus our live source
          won't be able to use the clock to produce data, making the sink never
          preroll and everything is stuck.

2017-04-20 13:16:24 +0100  Sebastian Dröge <sebastian centricular com>

        * gst/multifile/gstsplitmuxsink.c:
          splitmuxsink: Don't use an explicit name for requesting audio pads
          ... unless the muxer uses the same audio pad template name as
          splitmuxsink. We can't request a pad called "audio_0" on a muxer that
          wants pads to be "sink_%d".

2017-04-16 18:47:56 +0900  Seungha Yang <sh yang lge com>

        * gst/isomp4/qtdemux.c:
          qtdemux: Fix leak on QtDemuxStreamStsdEntry
          Fix unit test failure

2017-04-12 18:46:53 +0530  Nirbheek Chauhan <nirbheek centricular com>

        * ext/
          meson: Print message when disabling taglib on MSVC

2017-03-23 22:13:05 +0100  Carlos Rafael Giani <dv pseudoterminal org>

        * sys/v4l2/gstv4l2object.c:
          v4l2object: Also add videometa if there is padding to the right and bottom

2017-03-22 18:18:40 +0000  Enrique Ocaña González <eocanha igalia com>

        * gst/isomp4/qtdemux.c:
          qtdemux: distinguish TFDT with value 0 from no TFDT at all
          TFDTs with time 0 are being ignored since commit 1fc3d42f. They're
          mistaken with the case of not having TFDT, but those two cases
          must be distinguished in some way.
          This patch passes an extra boolean flag when the TFDT is present.
          This is now the condition being evaluated, instead of checking for
          0 time.

2017-03-08 15:27:32 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/atoms.c:
        * gst/isomp4/gstqtmux.c:
          qtmux: Fix some memory leaks related to timecode tracks

2017-03-17 12:19:53 +0200  Sebastian Dröge <sebastian centricular com>

        * gst/rtpmanager/gstrtpsession.c:
        * gst/rtpmanager/rtpsession.c:
        * gst/rtpmanager/rtpsession.h:
          Revert "rtpbin: pipeline gets an EOS when any rtpsources byes"
          This reverts commit eeea2a7fe88a17b15318d5b6ae6e190b2f777030.
          It breaks EOS in some sender pipelines, see

2017-03-16 00:41:44 +0000  Tim-Philipp Müller <tim centricular com>

        * gst/rtp/gstrtph264depay.c:
          rtph264depay: fix crash with empty sprops-parameters

2017-03-15 22:13:12 -0700  Sebastian Dröge <sebastian centricular com>

        * gst/isomp4/atoms.c:
          qtmux: Join chunks together if they have the same size
          Previously we were switching from one chunk to another on every single
          buffer. This wastes some space in the headers and, depending on the
          software, might depend in more reads (e.g. if the software is reading
          multiple samples in one go if they're in the same chunk).

2017-03-11 21:20:40 -0800  Thiago Santos <thiagossantos gmail com>

        * gst/isomp4/atomsrecovery.c:
        * gst/isomp4/atomsrecovery.h:
          atomsrecovery: also handle extra atoms after 'mdia' in a 'trak'
          Take into account the atoms at the end of the 'trak' atom when
          recovering it. So that its size (already computed and added in the trak
          size) isn't making offsets wrong.

2017-03-11 12:56:33 -0800  Thiago Santos <thiagossantos gmail com>

        * gst/isomp4/gstqtmux.c:
          qtmux: avoid fallthrough to moovrecovery failure section
          Return before that to preserve our successfull results, otherwise no
          moov recovery information would be written

2017-03-11 12:27:28 -0800  Thiago Santos <thiagossantos gmail com>

        * gst/isomp4/atomsrecovery.c:
          atomsrecovery: expect more atom types at the headers
          Skip more atoms at the header until it finds the 'mdat' to continue the
          moov recovery

2016-12-15 12:38:40 +0100  Michael Dutka <mail michael-dutka de>

        * gst/rtp/gstrtph264depay.c:
        * gst/rtp/gstrtph265depay.c:
          rtph264depay, rtph265depay: remove stray g_debug()

2017-02-08 13:36:00 +0000  Andrew <nifigase gmail com>

        * gst/rtpmanager/gstrtpjitterbuffer.c:
        * gst/rtpmanager/rtpjitterbuffer.c:
        * gst/rtpmanager/rtpjitterbuffer.h:
          rtpjitterbuffer: Don't always reset PTS to 0 after a gap
          In function rtp_jitter_buffer_calculate_pts: If gap in incoming RTP
          timestamps is more than (3 * jbuf->clock_rate) we call
          rtp_jitter_buffer_reset_skew which resets pts to 0. So components down
          the pipeline (playes, mixers) just skip frames/samples until pts becomes
          equal to pts before gap.
          In version 1.10.2 and before this checking was bypassed for packets with
          "estimated dts", and gaps were handled correctly.

2016-11-22 21:00:25 -0800  Scott D Phillips <scott d phillips intel com>

          meson: add libm to has_function checks
          The functions from math.h may be implemented in libm.

2017-02-23 17:22:59 +0000  Tim-Philipp Müller <tim centricular com>

          meson: update version

======== (3.27M)
  sha256sum: be053f6ed716eeb517cec148cec637cdce571c6e04d5c21409e2876fb76c7639

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]