Re: [Evolution] Evo 1.2 and Visor sync

[James Gallagher <jgallagher gso uri edu>]

On Wed, 2002-11-20 at 11:13, Mark Gordon wrote:
> On Wed, 2002-11-20 at 13:12, James Gallagher wrote:
> > Hi,
> >
> > I have a visor which was syncing nicely with 1.08. It won't sync with
> > 1.2. I've run gpilotd from the command line (in the past that helped me
> > get it set up properly) and here's what I see:
> >
> >         [jimg zanzibar jimg]$ gpilotd
> >         gpilotd-Message: gnome-pilot 0.1.69 starting...
> >         gpilotd-Message: compiled for pilot-link version 0.11.5
> >         gpilotd-Message: compiled with [VFS] [GOAD] [USB] [IrDA]
> >         [Network] 
> >         gpilotd-Message: Activating CORBA server
> >         gpilotd-Message: Watching Cradle (/dev/pilot)
> >         gpilotd-Message: setting PILOTRATE=9600
> >         HOME environment variable not set?
> >         
> >         Gtk-WARNING **: cannot open display: 
> >         [jimg zanzibar jimg]$ 
> >
> > I have a stock Red Hat 7.3 system running on a Dell Inspiron 4100 laptop
> > (P III) with Ximian Gnome.
> >
> > Any help would be greatly appreciated!
> >
> > James
> >
> > PS. I read on the list that slowing things down to 9600 would fix this
> > but for me that produced no visible change.
>
> USB or serial? There was an earlier thread with a similar error using a
> USB connection, and the resolution was to configure gnome-pilot to use a
> "serial" connection.

USB. You say 'serial' in quotes; is there a trick so that I can still
use the USB? Right now I have /dev/pilot linked to /dev/ttyUSB1.

Again, thanks!

James
-- 
__________________________________________________________________________
James Gallagher                  The Distributed Oceanographic Data System
jgallagher gso uri edu               http://unidata.ucar.edu/packages/dods
Voice: 775.337.8612                                      Fax: 775.337.2105