Re: [Ekiga-list] h323

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

On 21/09/11 17:21, Mike Westman wrote:
> OK, I was able to get it working.  I had to disable every network adapter in my computer except for the one that was actively providing internet access.

There are many chances that your problem be solved in the current 
unstable branch.  (Something with Contact field.)

> -----Original Message-----
> From: ekiga-list-bounces gnome org [mailto:ekiga-list-bounces gnome org] On Behalf Of Eugen Dedu
> Sent: Wednesday, September 21, 2011 10:20 AM
> To: Ekiga mailing list
> Subject: Re: [Ekiga-list] h323
>
> On 15/09/11 23:47, Mike Westman wrote:
> > That didn't help.  I don't get any indication at the far end that a connection attempt is being made.  I also can't receive a connection.  Is there logging that I can turn on to see if anything is happening?
>
> Yes, -d 4 output gives much information about what is going on.
>
> > From: Thierry Simonnet [mailto:t simonnet esiee fr]
> > Sent: Thursday, September 15, 2011 8:46 AM
> > To: Ekiga mailing list
> > Cc: Mike Westman
> > Subject: Re: [Ekiga-list] h323
> >
> > Could you make a try : only select H261 video codec. It seems to me that there are compatibility trouble with H263 and H264 codecs with Polycom and Tandberg system
> >
> > Le 15/09/2011 15:41, Mike Westman a écrit :
> > Sorry, I should have mentioned that this is on Windows 7 x64.  Version 3.2.7
> >
> > From: ekiga-list-bounces gnome org<mailto:ekiga-list-bounces gnome org>   [mailto:ekiga-list-bounces gnome org] On Behalf Of Thierry Simonnet
> > Sent: Thursday, September 15, 2011 1:53 AM
> > To: Ekiga mailing list
> > Subject: Re: [Ekiga-list] h323
> >
> > I work on 3.3.3 git version and I noticed that there is a trouble with H323. It works for Win32 version but not for Linux version. I use and manage network and Polycom device for tests (same test environment for Linux and win32).
> > I will post an ekiga -d 4 file soon.
> >
> > Best regards
> >
> > Le 15/09/2011 07:39, Dave Koelmeyer a écrit :
> >
> >
> > On 15 Sep, 2011,at 01:12 AM, Mike Westman<mike combatmedic net><mailto:mike combatmedic net>   wrote:
> > I'm trying to use Ekiga to connect to my company's LiveTime VTC systems.  On my Mac I can connect to the system's IP address using h323 without any problems.   When I try using Ekiga the software immediately states that it is unable to connect to remote host and replaces the address with sip:.
> >
> > What am I missing?  Thank you.
> >
> >
> > Hi Mike,
> >
> > When you enter the IP address of your system, be sure to enter it with the H323 prefix. For example, this is what you would enter in the Ekiga address bar (replace the IP address obviously):
> >
> > H323:192.168.1.1
> >
> > See if that works.
> >
> > Cheers,
> > --
> > Dave Koelmeyer
> > http://blog.davekoelmeyer.co.nz<http://blog.davekoelmeyer.co.nz/>
> _______________________________________________
> ekiga-list mailing list
> ekiga-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-list
> _______________________________________________
> ekiga-list mailing list
> ekiga-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-list