Re: [Ekiga-list] Microphone not detected only with ekiga (Eugen Dedu)

On 25/08/11 17:13, Joseph Dumont wrote:
ekiga -d 4 output is posted here.

Please use a service which does not force to wait, such as or pastebin.

Looking at your output, I see that the communication is not established, is that right? Why do you say that you hear the audio?

In the above log I also see that you are not registered to, and I wonder if it is possible to cal 500 ekiga net without being registered (I cannot test right now).

On 08/25/2011 07:28 AM, ekiga-list-request gnome org wrote:

I've just installed Ekiga 3.2.7 on OpenSuse 11.4,,
on a Thinkpad T410 (single audio combo jack).

I've followed the Audio Setup page, set all audio devices to the Default
(PTLIB/ALSA) (and later everything else just to check), I confirmed that
my ALSA configuration was working properly as both echo tests functioned

$ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0
-c 1 -r 8000 -f S16_LE -
$ arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0
-c 1 -r 16000 -f S16_LE -

But I am unable to perform an echo test within Ekiga. I can receive
calls and hear the audio, but the microphone will not pick anything up.
Looking at other archives, I didn't see a solution that worked for me.

More info that might be useful:
$ alsamixer
tells me that Master and Capture are both 100%

$/sbin/lspci | grep Aud
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio (rev 06)

The codecs are set to their defaults: Speex, PCMU, PCMA, silence
detection and echo cancelation are not enabled.

The same headpiece performs under skype.

I'm happy to send any other information.
Send us the -d 4 output when calling 500 ekiga net and when you speak
you do not ehar yourself.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]