Re: [Ekiga-list] opal 3.6.6 config issue for linux

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

Sohil Shah wrote:
> Hi,
>         I am getting the following config error for opal 3.6.6 ( on
> fedora 11 ).
> 
> [sohil EICPU1065 opal]$ ./configure
> checking for pkg-config... /usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for g++... g++
> checking for C++ compiler default output file name... a.out
> checking whether the C++ compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking for gcc... gcc
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking for a BSD-compatible install... /usr/bin/install -c
> checking for ranlib... ranlib
> checking how to run the C preprocessor... gcc -E
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for ANSI C header files... yes
> checking for ar... ar
> configure: gcc version is 4.4.1
> checking if gcc version is valid... yes
> checking for working bit scan intrinsic... yes
> .6nfigure: Opal version is 3
> .6ecking where plugins are being installed... /usr/local/lib/opal-3
> checking wether to build a shared library... yes
> checking build system type... i686-pc-linux-gnu
> checking host system type... i686-pc-linux-gnu
> checking target system type... i686-pc-linux-gnu
> checking Debugging support... no
> checking for PTLIB... yes
> Version:  2.6.5
> CFLAGS:   -DPTRACING=1 -D_REENTRANT -D_GNU_SOURCE=1 -fno-exceptions
> -I/usr/local/include -I/usr/include/SDL
> CXXFLAGS: -felide-constructors -Wreorder
> DEBUG:    -L/usr/local/lib -lpt_d -lrt -lsasl2 -lldap -llber -lldap_r
> -lssl -lcrypto -lz -lexpat -lSDL -lpthread -lresolv -ldl
> RELEASE:  -L/usr/local/lib -lpt -lrt -lsasl2 -lldap -llber -lldap_r
> -lssl -lcrypto -lz -lexpat -lSDL -lpthread -lresolv -ldl
> checking ptlib version... 2.6.5
> checking PTLIB has URL... yes
> checking PTLIB has STUN... yes
> checking PTLIB has SSL... yes
> checking PTLIB has ASN.1... yes
> checking PTLIB has expat... yes
> checking PTLIB has video... yes
> checking PTLIB has wavfile... yes
> checking PTLIB has vxml... yes
> checking PTLIB has ipv6... yes
> checking PTLIB has dtmf... yes
> checking PTLIB has ldap... yes
> checking PTLIB has dns... yes
> checking PTLIB has audio... yes
> checking PTLIB has config... yes
> checking PTLIB has option ssl/aes... no
> checking for sys/types.h... no
> checking for sys/stat.h... no
> checking for stdlib.h... no
> checking for string.h... no
> checking for memory.h... no
> checking for strings.h... no
> checking for inttypes.h... no
> checking for stdint.h... no
> checking for unistd.h... no
> checking how to run the C++ preprocessor... g++ -E
> checking dlfcn.h usability... no
> checking dlfcn.h presence... yes
> configure: WARNING: dlfcn.h: present but cannot be compiled
> configure: WARNING: dlfcn.h:     check for missing prerequisite headers?
> configure: WARNING: dlfcn.h: see the Autoconf documentation
> configure: WARNING: dlfcn.h:     section "Present But Cannot Be Compiled"
> configure: WARNING: dlfcn.h: proceeding with the preprocessor's result
> configure: WARNING: dlfcn.h: in the future, the compiler will take
> precedence
> checking for dlfcn.h... yes
> checking if dlopen is available... no
> checking for short... no
> checking size of short... 0
> checking for int... no
> checking size of int... 0
> checking for long... no
> checking size of long... 0
> checking for long long... no
> checking size of long long... 0
> checking for SPEEXDSP... yes
> checking speex/speex.h usability... no
> checking speex/speex.h presence... yes
> configure: WARNING: speex/speex.h: present but cannot be compiled
> configure: WARNING: speex/speex.h:     check for missing prerequisite
> headers?
> configure: WARNING: speex/speex.h: see the Autoconf documentation
> configure: WARNING: speex/speex.h:     section "Present But Cannot Be
> Compiled"
> configure: WARNING: speex/speex.h: proceeding with the preprocessor's
> result
> configure: WARNING: speex/speex.h: in the future, the compiler will take
> precedence
> checking for speex/speex.h... yes
> checking for speex/speex.h... (cached) yes
> checking Speex has float... no
> checking ZRTP protocol support... no
> checking libsrtp support... no
> checking jni.h usability... no
> checking jni.h presence... no
> checking for jni.h... no
> checking for swig... /usr/bin/swig
> checking whether to enable video codec support... yes
> checking whether to enable SIP protocol support... yes
> checking whether to enable H.323 protocol support... yes
> checking PTLIB has ASN... yes
> checking whether to enable IAX2 protocol support... yes
> checking whether to enable H.224 protocol support... yes
> checking whether to enable H.281 (Far End Camera Control) protocol
> support... yes
> checking whether to enable T.38 capability support... yes
> checking whether to enable MSRP support... no
> checking whether to enable SIPIM session support... yes
> checking whether to enable RFC4103 support... yes
> checking whether to enable T.38 FAX protocol support... yes
> checking whether to enable H.450... yes
> checking whether to enable H.460... yes
> checking whether to enable H.501... yes
> checking whether to enable LID support... yes
> checking whether to enable IVR support... yes
> checking whether to enable RFC4175 support... yes
> checking whether to enable accoustic echo cancellation support... yes
> checking whether to enable Packet Loss Concealment for G.711... yes
> checking whether to enable statistics gathering support... yes
> checking whether to enable plugin support... yes
> checking whether to enable samples build... no
> configure: creating ./config.status
> config.status: creating opal_defs.mak
> config.status: creating Makefile
> config.status: creating opal.pc
> config.status: creating opal.spec
> config.status: creating opal_cfg.dxy
> config.status: creating src/codec/speex/libspeex/speex_config_types.h
> config.status: creating include/opal/buildopts.h
> === configuring in plugins
> (/home/sohil/Desktop/Ekiga_Reference_Code/opal/plugins)
> configure: running /bin/sh ./configure '--prefix=/usr/local' 
> --cache-file=/dev/null --srcdir=.
> : command not found2:
> '/configure: line 23: syntax error near unexpected token `in
> '/configure: line 23: `  case `(set -o) 2>/dev/null` in
> configure: error: ./configure failed for plugins
> 
> 
> I executed dos2unix * in opal folder before ./configure.

Why?  Maybe this is the problem.

Where did you get the sources from?

-- 
Eugen