Re: [Ekiga-list] Problems with firewire capture

["jamesmikedupont googlemail com" <jamesmikedupont googlemail com>]

Here is my message without attachments
because of bounce.

On Sat, Mar 28, 2009 at 9:03 AM, jamesmikedupont googlemail com
<jamesmikedupont googlemail com> wrote:
> Hi,
>
> I am running on ubuntu unstable on a amd operon x86 - 64
> Linux mdupontdesktop2 2.6.27-7-generic #1 SMP Fri Oct 24 06:42:44 UTC
> 2008 i686 GNU/Linux
>
> I have the vloopback that was packaged in  flashcam-1.3 loaded
>
> lsmod {{{
> vloopback              20192  1
> compat_ioctl32          9344  1 vloopback
> video1394              23868  0
> videodev               41344  2 vloopback
> v4l1_compat            22404  1 videodev
> dv1394                 25180  0
> raw1394                32348  2
> }}}
>
> Ekiga : GNOME ekiga 2.0.12
>
> Using both direct capture : green screen
> {{{
>        GMVideoGrabber:b2502008 trying to open Panasonic NV-GS60 NV-GS60
> 2009/03/28 08:16:41.565
> 0:11.857        GMVideoGrabber:b2502008 Successfully opened avc1394
> 2009/03/28 08:16:41.565
> 0:11.857        GMVideoGrabber:b2502008 PColCnv SetFrameSize: 352x288 OK
> 2009/03/28 08:16:41.566
> 0:11.858        GMVideoGrabber:b2502008 PColCnv SetFrameSize: 176x144 OK
> 2009/03/28 08:16:41.568
> 0:11.860        GMVideoGrabber:b2502008 PVidDev SetFrameSize to 176x144
> 2009/03/28 08:16:41.568
> 0:11.860        GMVideoGrabber:b2502008 PVidDev SetColourFormatConverter,
> want YUV420P trying RGB32
> 2009/03/28 08:16:41.570
> 0:11.862        GMVideoGrabber:b2502008 PVidDev SetColourFormatConverter,
> want YUV420P trying BGR32
> 2009/03/28 08:16:41.570
> 0:11.862        GMVideoGrabber:b2502008 PVidDev SetColourFormatConverter,
> want YUV420P trying RGB24
> 2009/03/28 08:16:41.571
> 0:11.863        GMVideoGrabber:b2502008 PVidDev SetColourFormatConverter set
> renderer to RGB24
> 2009/03/28 08:16:41.572
> 0:11.864        GMVideoGrabber:b2502008 PColCnv SetFrameSize: 176x144 OK
> 2009/03/28 08:16:41.572
> 0:11.864        GMVideoGrabber:b2502008 PVidDev SetColourFormatConverter
> succeeded for YUV420P and device using RGB24
> 2009/03/28 08:16:41.574   0:11.866      GMVideoGrabber:b2502008 Cannot
> receive data on channel 63
> 2009/03/28 08:16:41.582   0:11.874      GMVideoGrabber:b2502008 Cannot
> receive data on channel 63
> }}}
>
>
> and loopback dv4l : no video
>
>  ekiga Detected the following video input devices: DV4Linux dv1394 to
> V4L,/dev/.static/dev/video9 with plugin V4L
>  GMVideoGrabber:09fb6da8 PVideoInputDevice_V4L::GetFrameData mcapture2
> failed : Inappropriate ioctl for device
>
> but xawtv runs fine
>
> xawtv now freezing up sometimes
>   {{{
>  ioctl: VIDIOCGCAP(name="DV4Linux dv1394 to V4L";type=0x1
> [CAPTURE];channels=1;audios=0;maxwidth=720;maxheight=576;minwidth=128;minheight=96):
> Inappropriate ioctl for device
>  ioctl: VIDIOCMCAPTURE(frame=0;height=288;width=384;format=4):
> Inappropriate ioctl for device}}}
>
> When i reselect the device "dvcam" then the video in awtv works.
>
> Mencoder :
> mencoder /dev/video0 success: format: 0  data: 0x0 - 0x0
>
> See the attached log files -v6
> I start in dvmode and switch to loopback.
>
>
> Thanks
> mike
>