Re: [Ekiga-list] Incoming call failure with 3.1.1

Damien Sandras wrote:
Le jeudi 26 février 2009 à 10:30 +0100, Alec Leamas a écrit :
Damien Sandras wrote:
Le mercredi 25 février 2009 à 21:02 -0500, Mark T.B. Carroll a écrit :
Damien Sandras <dsandras seconix com> writes:

Le jeudi 19 février 2009 à 00:32 -0500, Mark T.B. Carroll a écrit :
I have run through the configuration assistant thing from start to
finish. I can call the 500 ekiga net echo test and that works just fine. However, calling the 520 ekiga net callback service has it hang up on me
and then ... nothing, though the -d 5 output shows that it is indeed
getting a callback initiated from from sip:500 ekiga net which is then aborted. I am behind NAT and the router forwards incoming UDP from port 5060 to 5100 to the machine I'm using and acts as a gateway to let all
my outgoing packets out.

Should I gzip my -d 4 output and send it to somebody? I can also sniff
packets and send pcap files. I use Debian; software versions are,
There is a known problem with incoming calls and the current snapshot. I
will fix it this week-end.
Now with the 20090225 one, the incoming call does arrive (yay!), I hit
`accept', and it segfaults.

I can still send my -d 4 output to somebody. (-:
A gdb backtrace would be more useful.
waiting for some kind of customer "service", taking a backtrace (yes, same problem, trunk as of yesterday).

Despite trying 50 times, I can not reproduce it. Are you sure something
is not corrupted?

Eugen, can you reproduce it?
Hm... I'm not the only one with this issue, seems to pop up now and then, last this morning. Is it the build options? I's all very simple for me: call 520 ekiga net, wait until there is a incoming call, see a coredump for either "Accept" or "Reject", doesn't seem to matter which.

configure:      dummy
      export PTLIBDIR=$$PWD;    \
      ./configure               \
         --prefix=/usr          \
         --libdir=/usr/lib64    \
         --enable-debug         \
         --enable-tracing       \
         --disable-static       \
         --enable-plugins       \
         --disable-oss          \
         --enable-v4l2          \
         --disable-avc          \
hemulen ptlib-2.7.0$ svnversion
22117M # Some trace/logging changes, I think they are under control...

./configure --prefix=/usr --libdir=%{_libdir} --enable-debug    # OPAL
hemulen opal-3.7.0$ svnversion

================ Final configuration ===================
        Installing into prefix  :  /usr

                 GNOME support  :  disabled
                 GConf support  :  enabled
 Evolution-Data-Server support  :  enabled
                NOTIFY support  :  disabled
                  LDAP support  :  enabled

                XVideo support  :  enabled

                 H.323 support  :  yes
                   SIP support  :  yes

                  DBUS support  :  enabled
          DBUS service support  :  enabled
           mDNS/DNS-SD support  :  enabled
             GStreamer support  :  disabled
          KAddressBook support  :  disabled
                   KDE support  :  disabled
                  XCAP support  :  disabled
             libnotify support  :  disabled

                       OS Type  :  linux-gnu
                  Machine Type  :  x86_64
                    Byte Order  :  little endian

If all settings are OK, type make and make install
$ svnversion

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]