Re: [Ekiga-list] Ekiga version 2.0.12 no longer compatible with

Le lundi 08 décembre 2008 à 22:17 +1100, Colin Alie a écrit :
> Good evening Damien and Palo,
> Thanks for your replies.
> Damien, I'm sorry the expected debugging information was not included in my 
> last message.  I've since installed the correct libraries.  I've attached to 
> this message the file ekiga.log which contains the output from a session in 
> which the following actions were taken:
> - started ekiga ($ ekiga -d 4 2> ekiga.log)
> - Edit-->Accounts and activated account
> - dialed 500 ekiga net
> - waited for call to connect and said a few words
> - terminated call
> - quit Ekiga
> Palo, I read the thread "remote user cleared the call" that you started late 
> November.  I've taken your comment regarding NAT to heart.  Connecting my 
> laptop directly to the Internet was on my list of things to try as I'm able 
> to use Ekiga on my workstation at work which has a public IP address.
> One more thing...whenever I register to any account using Ekiga, I always see 
> two messages in the General History confirming registration.  Does this imply 
> anything?
> Anyway, thanks for your help.

There are a few things I do not understand :

1) the following
2008/12/08 21:52:44.348	  2:37.091	  SIP Transport:8527488	SIP	Bad
Request-Line received on udp$<if=udp
2008/12/08 21:52:44.349	  2:37.091	  SIP Transport:8527488	SIP	Malformed
request received on udp$<if=udp$>

It tells you are receiving a malformed request from, right
after you have sent the initial request yourself. But is not
sending anything yet.

2) it thinks the Malformed Packet is related to the INVITE

3) NAT settings are ok, but you are receiving no audio

4) 2.0.12 works for a few hundreds other users

Do you have a way to try 3.0 ?

 _     Damien Sandras
//\    Ekiga Softphone :
v_/_   Be IP           :
       FOSDEM          :
       SIP Phone       : sip:dsandras ekiga net

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]