Re: [Ekiga-list] ekiga 2.0.11 wont start

[alex <alex schlossadler net>]

alex wrote:
> Hi Guys,
>
> I managed to get the proper pwlib and opal given on the ekiga.net site, 
> built and installed.
>
> But when I run it, I get errors and it wont start:
>
> bash-3.00$ /usr/local/bin/ekiga
> ld.so.1: ekiga: fatal: libopal_solaris_x86_r.so.2.2: open failed: No 
> such file or directory
> Killed
>
> bash-3.00$ ls -l /usr/local/lib
> total 49396
> drwxr-xr-x   3 root     root         512 Oct 12 10:50 bonobo
> lrwxrwxrwx   1 root     root          31 Oct 12 10:38 libopal.so -> 
> libopal_solaris_x86_r.so.2.2.11
> lrwxrwxrwx   1 root     root          31 Oct 12 10:38 
> libopal_solaris_x86_r.so -> libopal_solaris_x86_r.so.2.2.11
> lrwxrwxrwx   1 root     root          31 Oct 12 10:38 
> libopal_solaris_x86_r.so.2 -> libopal_solaris_x86_r.so.2.2.11
> lrwxrwxrwx   1 root     root          31 Oct 12 10:38 
> libopal_solaris_x86_r.so.2.2 -> libopal_solaris_x86_r.so.2.2.11
> -rwxr-xr-x   1 root     root     19260752 Oct 12 10:38 
> libopal_solaris_x86_r.so.2.2.11
> lrwxrwxrwx   1 root     root          22 Oct 12 10:26 libpt.so -> 
> libpt_solaris_x86_r.so
> lrwxrwxrwx   1 root     root          30 Oct 12 10:26 
> libpt_solaris_x86_r.so -> libpt_solaris_x86_r.so.1.10.10
> lrwxrwxrwx   1 root     root          30 Oct 12 10:26 
> libpt_solaris_x86_r.so.1 -> libpt_solaris_x86_r.so.1.10.10
> lrwxrwxrwx   1 root     root          30 Oct 12 10:26 
> libpt_solaris_x86_r.so.1.10 -> libpt_solaris_x86_r.so.1.10.10
> -r--r--r--   1 root     root     5975888 Oct 12 10:26 
> libpt_solaris_x86_r.so.1.10.10
> drwxr-xr-x   3 root     root         512 Oct 12 10:26 pwlib
>
> What could be the problem?
>
> _______________________________________________
> ekiga-list mailing list
> ekiga-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-list
>
>   

Ok, I fixed this, but I dont understand why I had to do, what I did. 
When I built pwlib, opal and ekiga, I used --prefix=/usr/local on each.
For some reason ekiga was looking in /usr/lib instead of /usr/local/lib, 
I re-ran the install for each of the libraries, but this time installed 
them in
/usr, ekiga now starts, but I get an error message about no suitable 
audio plugins being found. I have ekiga 2.0.9 installed on the same system
and it works..

bash-3.00$ /usr/local/bin/ekiga -d 4
2007/10/12 11:05:00.981   0:00.382                        ekiga Detected 
audio plugins:
2007/10/12 11:05:00.981   0:00.382                        ekiga Detected 
video plugins: Picture,V4L
2007/10/12 11:05:00.982   0:00.383                        ekiga Detected 
audio plugins:
2007/10/12 11:05:00.982   0:00.383                        ekiga Detected 
video plugins: Picture,V4L
2007/10/12 11:05:51.168   0:50.569                        ekiga OpalMan 
Deleted manager.

Any ideas?