Re: [Ekiga-list] linksys SPA-3102 + ekiga
- From: Damien Sandras <dsandras seconix com>
- To: Ekiga mailing list <ekiga-list gnome org>
- Subject: Re: [Ekiga-list] linksys SPA-3102 + ekiga
- Date: Fri, 29 Jun 2007 17:51:47 +0200
Le vendredi 29 juin 2007 �5:57 +0200, Alessio Sangalli a �it :
> Hi, I've been trying to call in local network (same switch, no routing
> no NAT, no SIP registration, direct IP call) a linksys-sipura SPA-3102
> with a regular analog phone attached.
>
> I only had success using the codec "PCMA" or "PCMU", any other codec
> would let the telephone ring but, when I picked up the receiver, I
> continued to get the calling tone at the ekiga side, altough there was
> "connected with IP" on the status label.
>
> At first I thought that there were "pitch" problems with PCMU but it
> seems I had a false alarm due to the eccessive gain used on my headset
> microphone.
>
> The Linksys SPA-3102 shows these choices as "preferred codecs":
> G711a
> G711u
> G726-8
> G726-16
> G726-24
> G726-32
> G726-40
> G729a
> G723
A -d 4 debug trace would be useful, but I think the only common codecs
are G.711a and G.711u...
--
_ Damien Sandras
(o-
//\ Ekiga Softphone : http://www.ekiga.org/
v_/_ NOVACOM : http://www.novacom.be/
FOSDEM : http://www.fosdem.org/
SIP Phone : sip:dsandras ekiga net
[
Date Prev][Date Next] [
Thread Prev][Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]