Re: [Ekiga-devel-list] [ekiga 3.3.1] trouble with NetworkManager (not installed)



On 02/07/2011 08:57 PM, Eugen Dedu wrote:
On 07/02/11 15:17, Thierry Simonnet wrote:
Hello,

I'm running slackware 13.1 and I don't have NetworkManager installed

With the last version I have the following messages :

*2011/02/07 15:14:58.076 0:00.258 PWLib File handle high water mark set:
13 Thread unblock pipe
2011/02/07 15:14:58.078 0:00.260 PTLib No permission to set priority
level 4
2011/02/07 15:14:58.078 0:00.260 PTLib Thread high water mark set: 4
2011/02/07 15:14:58.091 0:00.272 HalManager_dbus Initialising HAL Manager
2011/02/07 15:14:58.096 0:00.278 HalManager_dbus Populating device list
2011/02/07 15:14:58.145 0:00.327 HalManager_dbus Detected V4L
capabilities on /dev/video0 name: Camera
2011/02/07 15:14:58.145 0:00.327 HalManager_dbus Detected V4L2
capabilities on /dev/video0 name: Camera
2011/02/07 15:14:58.300 0:00.481 HalManager_dbus Populated device list
with 12 devices
2011/02/07 15:14:58.300 0:00.482 HalManager_dbus Populating interface list
2011/02/07 15:14:58.302 0:00.483 HalManager_dbus Populating full
interface list failed - The name org.freedesktop.NetworkManager was not
provided by any .service files
Segmentation fault

It works here.  Please send us the gdb stacktrace.

Here it is.
Seems to be more a ptlib trouble.

--

Thierry Simonnet

ESIEE-Paris

Par respect pour l’environnement, n’imprimez ce mail que si nécessaire


GNU gdb (GDB) 7.2
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "i486-slackware-linux".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/local/bin/ekiga...done.
[?1034h(gdb) run
Starting program: /usr/local/bin/ekiga -d 4
Traceback (most recent call last):
  File "/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.2600.1-gdb.py", line 9, in <module>
    from gobject import register
  File "/usr/share/glib-2.0/gdb/gobject.py", line 3, in <module>
    import gdb.backtrace
ImportError: No module named backtrace
[Thread debugging using libthread_db enabled]
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to connect to socket /tmp/dbus-H69ZfVT7JM: Connection refused)
        dyna.cxx(136)		DYNA	Successfully loaded 'libavcodec.so.52'
        dyna.cxx(136)		DYNA	Successfully loaded '/usr/local/lib/libavutil.so'
        dyna.cxx(172)	H264	DYNA	Error /usr/local/lib/libavcodec.so.52: undefined symbol: h264_decoder
        dyna.cxx(247)	H264	DYNA	Failed to load h264_decoder
   h264-x264.cxx(831)	H264	Codec	Disabled
2011/02/11 10:11:59.747	  0:00.668	                       		Version 3.3.1 by  on Unix Linux (2.6.35.10-smp-i686) with PTLib (v2.9beta1 (svn:24531)) at 2011/2/11 10:11:59.747
2011/02/11 10:11:59.747	  0:00.668	                       	Ekiga git revision: EKIGA_3_3_0-90-g3b19809
2011/02/11 10:11:59.748	  0:00.669	                       	Couldn't connect to session bus : Failed to connect to socket /tmp/dbus-H69ZfVT7JM: Connection refused
2011/02/11 10:11:59.748	  0:00.669	                       	PWLib	File handle high water mark set: 11 Thread unblock pipe
2011/02/11 10:11:59.749	  0:00.670	                       	PTLib	No permission to set priority level 4
2011/02/11 10:11:59.764	  0:00.685	                       	PTLib	Thread high water mark set: 2
2011/02/11 10:11:59.764	  0:00.685	                       	PWLib	File handle high water mark set: 13 Thread unblock pipe
2011/02/11 10:11:59.764	  0:00.685	                       	PTLib	No permission to set priority level 4
2011/02/11 10:11:59.774	  0:00.695	                       	PTLib	Thread high water mark set: 3
[New Thread 0xb51dfb70 (LWP 3751)]
[New Thread 0xb519fb70 (LWP 3752)]
2011/02/11 10:11:59.811	  0:00.732	                       	PWLib	File handle high water mark set: 15 Thread unblock pipe
2011/02/11 10:11:59.814	  0:00.735	                       	PTLib	No permission to set priority level 4
2011/02/11 10:11:59.827	  0:00.748	                       	PTLib	Thread high water mark set: 4
2011/02/11 10:11:59.828	  0:00.749	                       	HalManager_dbus	Initialising HAL Manager
2011/02/11 10:11:59.832	  0:00.753	                       	HalManager_dbus	Populating device list
2011/02/11 10:11:59.873	  0:00.794	                       	HalManager_dbus	Detected V4L capabilities on /dev/video0 name: Camera
2011/02/11 10:11:59.873	  0:00.794	                       	HalManager_dbus	Detected V4L2 capabilities on /dev/video0 name: Camera
2011/02/11 10:12:00.013	  0:00.934	                       	HalManager_dbus	Populated device list with 12 devices
2011/02/11 10:12:00.014	  0:00.935	                       	HalManager_dbus	Populating interface list
2011/02/11 10:12:00.016	  0:00.936	                       	HalManager_dbus	Populating full interface list failed - The name org.freedesktop.NetworkManager was not provided by any .service files
[New Thread 0xb515cb70 (LWP 3753)]

Program received signal SIGSEGV, Segmentation fault.
0x03f81cc3 in ?? ()
(gdb) th
thbreak  thread   
(gdb) thread apply all b
Display all 7119 possibilities? (y or n)
(gdb) thread apply all bt

Thread 4 (Thread 0xb515cb70 (LWP 3753)):
#0  0xb65ea732 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0
#1  0xb74390bd in PSyncPoint::Wait() () from /usr/local/lib/libpt.so.2.9-beta1
#2  0xb7f9a4ae in GMVideoOutputManager::Main (this=0x812c550)
    at ../lib/engine/components/common-videooutput/videooutput-manager-common.cpp:88
#3  0xb7438f0f in PThread::PX_ThreadStart(void*) () from /usr/local/lib/libpt.so.2.9-beta1
#4  0xb65e5c04 in start_thread () from /lib/libpthread.so.0
#5  0xb640648e in clone () from /lib/libc.so.6

Thread 3 (Thread 0xb519fb70 (LWP 3752)):
#0  0xb65ea732 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0
#1  0xb74390bd in PSyncPoint::Wait() () from /usr/local/lib/libpt.so.2.9-beta1
#2  0xb7e9043f in Ekiga::AudioEventScheduler::Main (this=0x8129bf4)
    at ../lib/engine/audiooutput/audiooutput-scheduler.cpp:84
#3  0xb7438f0f in PThread::PX_ThreadStart(void*) () from /usr/local/lib/libpt.so.2.9-beta1
#4  0xb65e5c04 in start_thread () from /lib/libpthread.so.0
#5  0xb640648e in clone () from /lib/libc.so.6

Thread 2 (Thread 0xb51dfb70 (LWP 3751)):
#0  0xb65ea732 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0
#1  0xb74390bd in PSyncPoint::Wait() () from /usr/local/lib/libpt.so.2.9-beta1
#2  0xb7e85e51 in Ekiga::VideoInputCore::VideoPreviewManager::Main (this=0x8129380)
    at ../lib/engine/videoinput/videoinput-core.cpp:106
#3  0xb7438f0f in PThread::PX_ThreadStart(void*) () from /usr/local/lib/libpt.so.2.9-beta1
#4  0xb65e5c04 in start_thread () from /lib/libpthread.so.0
#5  0xb640648e in clone () from /lib/libc.so.6

Thread 1 (Thread 0xb5f987f0 (LWP 3748)):
#0  0x03f81cc3 in ?? ()
#1  0xb74544e3 in PPluginManager::GetPluginsDeviceNames(PString const&, PString const&, int) const ()
   from /usr/local/lib/libpt.so.2.9-beta1
#2  0xb736b576 in PVideoInputDevice::GetDriversDeviceNames(PString const&, PPluginManager*) ()
   from /usr/local/lib/libpt.so.2.9-beta1
#3  0xb7878930 in OpalManager::OpalManager() () from /usr/local/lib/libopal.so.3.9-beta1
#4  0xb7ef0107 in Opal::CallManager::CallManager (this=0x817ffe0, _core=...)
    at ../lib/engine/components/opal/opal-call-manager.cpp:100
#5  0xb7f21167 in OPALSpark::try_initialize_more (this=0x813dce0, core=...)
    at ../lib/engine/components/opal/opal-main.cpp:116
#6  0xb7e4d11f in Ekiga::KickStart::kick (this=0xbffff310, core=..., argc=0xbffff474, argv=0xbffff478)
    at ../lib/engine/framework/kickstart.cpp:134
#7  0xb7e3c55b in engine_init (service_core=..., argc=1, argv=0xbffff634) at ../lib/engine/engine.cpp:191
#8  0x0808b6b4 in main (argc=1, argv=0xbffff634) at gui/main_window.cpp:4811
(gdb) quit
A debugging session is active.

	Inferior 1 [process 3748] will be killed.

Quit anyway? (y or n) 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]