Re: [Ekiga-devel-list] 3.2.5 release

[Damien Sandras <dsandras seconix com>]

Le lundi 06 juillet 2009 à 20:20 +0100, Peter Robinson a écrit :
> >> >> So we are preparing a new stable release.  What are the blocking bugs?
> >> >>
> >> >> - picture in picture does not work sometimes
> >> >> - -d 4 warnings about too many consecutive I-frames, still investigating
> >> >> if it is harmful or not
> >> >> - initially greyed image, seems only cosmetic, still investigating
> >> >>
> >> >> Are there others?
> >> >>
> >> >
> >> > The PDU>1500 issue?
> >> >
> >> > Here is a report from a Ubnutu user (I know, I should not trust blindly
> >> > a user, but i wont be able to test before tomorrow...):
> >> > "No I hadn't installed any non-free codecs (not knowingly anyway).
> >> >
> >> > I wanted to confirm this so I booted from clean live USB memory stick
> >> > image (Jaunty).
> >> > Selected ekiga for installation.
> >> > Synaptic informs that the following are required: libgsm1, libopal3.6.1,
> >> > libpt2.6.1, libpt2.6.1-plugins-alsa, libpt2.6.1-plugins-v4l2. (All of
> >> > these come from the Main repository).
> >> >
> >> > Once above are installed: Ekiga has the same problem as described above
> >> > (PDU exceed 1500) and same solution as you describe above also works.
> >> >
> >> > Out-of-the-box Audio codecs: G722, Speex(16kHz), PCMA, PCMU, G726-16,
> >> > G726-24, G726-32, G726-40, gsm, ms-gsm, Speex(8kHz).
> >> >
> >> > Out-of-the-box Video codecs: h261, theora.
> >> >
> >> > So, in answer to your question, only using default packages from Ubuntu
> >> > is sufficient for PDU to exceed 1500."
> >> >
> >> > Do we need a workaround for this before a proper fix? (TCP support)
> >>
> >> A workaround would be to switch off some codecs by default (for initial
> >> installation), for ex. G726-24, G726-32, G726-40, gsm, ms-gsm,
> >> Speex(8kHz).  What do you think?
> >>
> >
> > Isn't that already the case ?
> >
> > I need to check.
> 
> The default in Fedora certainly doesn't enable them by default and we
> don't do anything with that sort of config so I assume its the
> default.
> 

That's what I thought. By default, only a few codecs are enabled.
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   Be IP           : http://www.beip.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras ekiga net