Re: [Ekiga-devel-list] Video Not working with Ekiga Trunk Version dated 7/2/07
- From: Matthias Schneider <ma30002000 yahoo de>
- To: Ekiga development mailing list <ekiga-devel-list gnome org>
- Subject: Re: [Ekiga-devel-list] Video Not working with Ekiga Trunk Version dated 7/2/07
- Date: Tue, 3 Jul 2007 18:23:03 +0200 (CEST)
Hello Anand,
according to the debug output you sent you did not establish any call, so I suppose that you just
tried the video in preview mode. The windows development version makes use of DirectDraw for video
output (if available). Its implementation right now does depend on incoming video to display any
frame (its not really a bug but rather a missing feature that is known and will be resolved once a
good approach has been decided upon). So DirectDraw video will work once a call is established and
if receiving video, but not in preview mode and not when only sending video. (Could you perhaps
check that?)
Also I think this alignment error in mpeg4 should have been fixed un June 16 I think....
Matthias
--- Anand R Setlur <asetlur alcatel-lucent com> schrieb:
> Hello List,
>
> I was wondering if anyone else is running into the same issue as me and if there
> is a known/suggested workaround. With the introduction of directshow support
> in the Ekiga2 stream, my webcam works rather well there whereas I get a blank
> screen with no video when I try to compile and run the bleeding edge version of
> Ekiga(compiled yesterday July 2,2007) from the SVN trunk. The rest of the GUI
> works fine and even the video acts as though it is displaying something with
> suspend video/resume video but with no actual displayed output.
>
> Any insight into this issue is much appreciated.
>
> Here is the output of ekiga.exe -d 5
>
> > H.264 plugin: successfully loaded .\avcodec
> > H.264 Plugin: Found GPL process executable in .\plugins\libH264_pwplugin_helper.exe
> > H.264 Plugin: Successfully created child process 3324
> > H.264 Plugin: Successfully established communication with child process
> > MPEG4 plugin: ff_check_alignment() reports failure; stack alignment is not correct
> > 2007/07/03 10:55:59.555 0:01.778 ekiga Version 2.1.0 by on Windows XP
> (v5.1.2600-i586) at 2007/7/3 10:55:59.555
> > 2007/07/03 10:55:59.555 0:01.778 ekiga Detected audio plugins: WindowsMultimedia
> > 2007/07/03 10:55:59.555 0:01.778 ekiga Detected video plugins:
> DirectShow,VideoForWindows,Picture
> > 2007/07/03 10:55:59.555 0:01.779 ekiga Detected audio plugins: WindowsMultimedia
> > 2007/07/03 10:55:59.555 0:01.779 ekiga Detected video plugins:
> DirectShow,VideoForWindows,Picture
> > 2007/07/03 10:55:59.555 0:01.779 ekiga PVidDirectShow GetInputDeviceNames()
> > 2007/07/03 10:55:59.571 0:01.792 ekiga PVidDirectShow GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:55:59.571 0:01.792 ekiga PVidDirectShow GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro (VFW)'
> > 2007/07/03 10:55:59.571 0:01.792 ekiga PVidDirectShow GetInputDeviceNames() No more
> video capture device
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the following audio input devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the following audio output devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the following video input devices:
> Live! Cam Notebook Pro #2,Live! Cam Notebook Pro (VFW) with plugin DirectShow
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the following audio input devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.912 ekiga Detected the following audio output devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.912 ekiga Detected the following video input devices:
> Live! Cam Notebook Pro #2,Live! Cam Notebook Pro (VFW) with plugin DirectShow
> >
> > (ekiga.exe:4956): Pango-WARNING **: couldn't load font "Tahoma Condensed Not-Rotated 8",
> falling back to "Sans Condensed Not-Rotated 8", expect ugly output.
> >
> > (ekiga.exe:4956): Pango-WARNING **: couldn't load font "Sans Condensed Not-Rotated 8", falling
> back to "Sans Not-Rotated 8", expect ugly output.
> > 2007/07/03 10:56:00.290 0:02.505 ekiga Ekiga version 2.1.0
> > 2007/07/03 10:56:00.290 0:02.505 ekiga OPAL version 2.3.2
> > 2007/07/03 10:56:00.290 0:02.505 ekiga PWLIB version 1.11.3
> > 2007/07/03 10:56:00.290 0:02.505 ekiga GNOME support disabled
> > 2007/07/03 10:56:00.290 0:02.505 ekiga Fullscreen support disabled
> > 2007/07/03 10:56:00.290 0:02.506 ekiga DBUS support disabled
> > 2007/07/03 10:56:00.305 0:02.531 ekiga Set TCP port range to 30000:30010
> > 2007/07/03 10:56:00.305 0:02.531 ekiga Set RTP port range to 5000:5059
> > 2007/07/03 10:56:00.321 0:02.531 ekiga Set UDP port range to 5060:5100
> > 2007/07/03 10:56:00.321 0:02.531 ekiga OpalEP Created endpoint: h323
> > 2007/07/03 10:56:00.321 0:02.531 ekiga H323 Created endpoint.
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added route "pc:.*=h323:<da>"
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalEP Created endpoint: sip
> > 2007/07/03 10:56:00.321 0:02.532 ekiga SIP Created endpoint.
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added route "pc:.*=sip:<da>"
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalEP Created endpoint: pc
> > 2007/07/03 10:56:00.321 0:02.532 ekiga PCSS Created PC sound system endpoint.
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added route "h323:.*=pc:<da>"
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added route "sip:.*=pc:<da>"
> > 2007/07/03 10:56:00.321 0:02.533 ekiga PVidDirectShow GetInputDeviceNames()
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro (VFW)'
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow GetInputDeviceNames() No more
> video capture device
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow PVideoInputDevice_DirectShow:
> constructor
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow Open(Live! Cam Notebook Pro
> #2,0)
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow IsOpen()
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow InitializeCapture()
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow Initialize_Interfaces()
> > 2007/07/03 10:56:00.462 0:02.672 ekiga PVidDirectShow SetDevice(Live! Cam Notebook
> Pro #2)
> > 2007/07/03 10:56:00.462 0:02.679 ekiga PVidDirectShow SetDevice() current capture
> device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:00.540 0:02.755 ekiga PVidDirectShow SetDevice() This one is kept
> 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:00.555 0:02.775 ekiga PVidDirectShow ListSupportedFormats()
> > 2007/07/03 10:56:00.571 0:02.781 ekiga PVidDirectShow Fmt[0] = (YUV420P, 320x240,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.782 ekiga PVidDirectShow Fmt[1] = (YUV420P, 640x480,
> 15fps)
> > 2007/07/03 10:56:00.571 0:02.782 ekiga PVidDirectShow Fmt[2] = (YUV420P, 352x288,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow Fmt[3] = (YUV420P, 176x144,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow Fmt[4] = (YUV420P, 160x120,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow Fmt[5] = (BGR24, 320x240,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow Fmt[6] = (BGR24, 640x480,
> 15fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow Fmt[7] = (BGR24, 352x288,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow Fmt[8] = (BGR24, 176x144,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow Fmt[9] = (BGR24, 160x120,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow GetDefaultFormat()
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow Default format is: YUV420P,
> 320x240, 30fps)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow SetColourFormat(YUV420P)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow SetFormat("YUV420P", 320x240,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.785 ekiga PVidDirectShow Using setting [0] = (YUV420P,
> 320x240, 30fps, max:30fps)
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDirectShow Ok
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDev SetColourFormatConverter success for
> native YUV420P
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDirectShow SetFrameRate(30fps)
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDirectShow SetFormat("YUV420P", 320x240,
> 30fps)
> > 2007/07/03 10:56:00.665 0:02.856 ekiga PVidDirectShow Using setting [0] = (YUV420P,
> 320x240, 30fps, max:30fps)
> > 2007/07/03 10:56:00.665 0:02.857 ekiga PVidDirectShow Ok
> > 2007/07/03 10:56:00.665 0:02.857 ekiga PVidDirectShow SetFrameSize(176, 144)
> > 2007/07/03 10:56:00.665 0:02.857 ekiga PVidDirectShow SetFormat("YUV420P", 176x144,
> 30fps)
> > 2007/07/03 10:56:00.665 0:02.859 ekiga PVidDirectShow Using setting [3] = (YUV420P,
> 176x144, 30fps, max:30fps)
> > 2007/07/03 10:56:00.665 0:02.860 ekiga PVidDirectShow Ok
> > 2007/07/03 10:56:00.665 0:02.860 ekiga PVidDirectShow SetFrameSize 176x144 is
> suported in hardware
> > 2007/07/03 10:56:00.665 0:02.860 ekiga PVidDev SetFrameSize to 176x144
> > 2007/07/03 10:56:00.665 0:02.861 ekiga PVidDirectShow set frame size 176x144
> frameBytes=38016
> > 2007/07/03 10:56:00.665 0:02.861 ekiga PVidDirectShow Start()
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev SetFrameSize to 176x144
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev SetColourFormatConverter, want YUV420P
> trying RGB32
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev SetColourFormatConverter, want YUV420P
> trying BGR32
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev SetColourFormatConverter, want YUV420P
> trying RGB24
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev SetColourFormatConverter set renderer
> to RGB24
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev SetColourFormatConverter succeeded for
> YUV420P and device using RGB24
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDirectShow IsOpen()
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow GetWhiteness() = 39321
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow GetBrighness() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow GetColour() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow GetContrast() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow GetHue() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow GetInputDeviceNames()
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro (VFW)'
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow GetInputDeviceNames() No more
> video capture device
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow PVideoInputDevice_DirectShow:
> constructor
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow IsOpen()
> > 2007/07/03 10:56:02.774 0:04.963 Opal Liste...er:3fa6860 Listen Started listening thread on
> tcp$135.185.54.110:1720
> > 2007/07/03 10:56:02.774 0:04.963 Opal Liste...er:3fa6860 Listen Waiting on socket accept on
> tcp$135.185.54.110:1720
> > 2007/07/03 10:56:02.790 0:04.983 Opal Liste...er:3f6a4a8 Listen Started listening thread on
> udp$135.185.54.110:5060
> > 2007/07/03 10:56:02.852 0:05.041 ekiga Detected audio codecs:
>
G.711-ALaw-64k,G.711-uLaw-64k,GSM-06.10,iLBC-13k3,SpeexNB,SpeexIETFNarrow-8k,SpeexWNarrow-8k,SpeexWB,SpeexIETFWide-20.6k,SpeexWide-20.6k
> > 2007/07/03 10:56:02.930 0:05.123 ekiga Detected video codecs:
> H.261,H.261-CIF,H.261-QCIF,H.264,MPEG4,MPEG4-CIF,MPEG4-QCIF
>
> > 2007/07/03 10:56:24.009 0:26.209 ekiga SIP Deleted endpoint.
> > 2007/07/03 10:56:24.009 0:26.209 ekiga OpalEP sip endpoint destroyed.
> > 2007/07/03 10:56:24.009 0:26.210 ekiga PCSS Deleted PC sound system endpoint.
> > 2007/07/03 10:56:24.009 0:26.210 ekiga OpalEP pc endpoint destroyed.
> > 2007/07/03 10:56:24.009 0:26.210 ekiga OpalMan Deleted manager.
> > Compiler did not align stack variables. Libavcodec has been miscompiled
> > and may be very slow or crash. This is not a bug in libavcodec,
> > but in the compiler. Do not report crashes to FFmpeg developers.
>
>
> _______________________________________________
> Ekiga-devel-list mailing list
> Ekiga-devel-list gnome org
> http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
>
__________________________________ BE A BETTER GRILLMEISTER: Jetzt Frage stellen und einen von 44 iPods gewinnen! www.yahoo.de/clever
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
