[Ekiga-devel-list] Video Not working with Ekiga Trunk Version dated 7/2/07



Hello List,

I was wondering if anyone else is running into the same issue as me and if there
is a known/suggested workaround. With the introduction of directshow support
in the Ekiga2 stream, my webcam works rather well there whereas I get a blank
screen with no video when I try to compile and run the bleeding edge version of
Ekiga(compiled yesterday July 2,2007) from the SVN trunk. The rest of the GUI
works fine and even the video acts as though it is displaying something with
suspend video/resume video but with no actual displayed output.

Any insight into this issue is much appreciated.

Here is the output of ekiga.exe -d 5

> H.264 plugin: successfully loaded .\avcodec
> H.264 Plugin: Found GPL process executable in .\plugins\libH264_pwplugin_helper.exe
> H.264 Plugin: Successfully created child process 3324
> H.264 Plugin: Successfully established communication with child process
> MPEG4 plugin: ff_check_alignment() reports failure; stack alignment is not correct
> 2007/07/03 10:55:59.555	  0:01.778	       ekiga		Version 2.1.0 by  on Windows XP (v5.1.2600-i586) at 2007/7/3 10:55:59.555
> 2007/07/03 10:55:59.555	  0:01.778	       ekiga	Detected audio plugins: WindowsMultimedia
> 2007/07/03 10:55:59.555	  0:01.778	       ekiga	Detected video plugins: DirectShow,VideoForWindows,Picture
> 2007/07/03 10:55:59.555	  0:01.779	       ekiga	Detected audio plugins: WindowsMultimedia
> 2007/07/03 10:55:59.555	  0:01.779	       ekiga	Detected video plugins: DirectShow,VideoForWindows,Picture
> 2007/07/03 10:55:59.555	  0:01.779	       ekiga	PVidDirectShow	GetInputDeviceNames()
> 2007/07/03 10:55:59.571	  0:01.792	       ekiga	PVidDirectShow	GetInputDeviceNames() Found this capture device 'Live! Cam Notebook Pro #2'
> 2007/07/03 10:55:59.571	  0:01.792	       ekiga	PVidDirectShow	GetInputDeviceNames() Found this capture device 'Live! Cam Notebook Pro (VFW)'
> 2007/07/03 10:55:59.571	  0:01.792	       ekiga	PVidDirectShow	GetInputDeviceNames() No more video capture device
> 2007/07/03 10:55:59.696	  0:01.911	       ekiga	Detected the following audio input devices: SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> 2007/07/03 10:55:59.696	  0:01.911	       ekiga	Detected the following audio output devices: SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> 2007/07/03 10:55:59.696	  0:01.911	       ekiga	Detected the following video input devices: Live! Cam Notebook Pro #2,Live! Cam Notebook Pro (VFW) with plugin DirectShow
> 2007/07/03 10:55:59.696	  0:01.911	       ekiga	Detected the following audio input devices: SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> 2007/07/03 10:55:59.696	  0:01.912	       ekiga	Detected the following audio output devices: SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin WindowsMultimedia
> 2007/07/03 10:55:59.696	  0:01.912	       ekiga	Detected the following video input devices: Live! Cam Notebook Pro #2,Live! Cam Notebook Pro (VFW) with plugin DirectShow
> 
> (ekiga.exe:4956): Pango-WARNING **: couldn't load font "Tahoma Condensed Not-Rotated 8", falling back to "Sans Condensed Not-Rotated 8", expect ugly output.
> 
> (ekiga.exe:4956): Pango-WARNING **: couldn't load font "Sans Condensed Not-Rotated 8", falling back to "Sans Not-Rotated 8", expect ugly output.
> 2007/07/03 10:56:00.290	  0:02.505	       ekiga	Ekiga version 2.1.0
> 2007/07/03 10:56:00.290	  0:02.505	       ekiga	OPAL version 2.3.2
> 2007/07/03 10:56:00.290	  0:02.505	       ekiga	PWLIB version 1.11.3
> 2007/07/03 10:56:00.290	  0:02.505	       ekiga	GNOME support disabled
> 2007/07/03 10:56:00.290	  0:02.505	       ekiga	Fullscreen support disabled
> 2007/07/03 10:56:00.290	  0:02.506	       ekiga	DBUS support disabled
> 2007/07/03 10:56:00.305	  0:02.531	       ekiga	Set TCP port range to 30000:30010
> 2007/07/03 10:56:00.305	  0:02.531	       ekiga	Set RTP port range to 5000:5059
> 2007/07/03 10:56:00.321	  0:02.531	       ekiga	Set UDP port range to 5060:5100
> 2007/07/03 10:56:00.321	  0:02.531	       ekiga	OpalEP	Created endpoint: h323
> 2007/07/03 10:56:00.321	  0:02.531	       ekiga	H323	Created endpoint.
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	OpalMan	Added route "pc:.*=h323:<da>"
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	OpalEP	Created endpoint: sip
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	SIP	Created endpoint.
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	OpalMan	Added route "pc:.*=sip:<da>"
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	OpalEP	Created endpoint: pc
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	PCSS	Created PC sound system endpoint.
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	OpalMan	Added route "h323:.*=pc:<da>"
> 2007/07/03 10:56:00.321	  0:02.532	       ekiga	OpalMan	Added route "sip:.*=pc:<da>"
> 2007/07/03 10:56:00.321	  0:02.533	       ekiga	PVidDirectShow	GetInputDeviceNames()
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	GetInputDeviceNames() Found this capture device 'Live! Cam Notebook Pro #2'
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	GetInputDeviceNames() Found this capture device 'Live! Cam Notebook Pro (VFW)'
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	GetInputDeviceNames() No more video capture device
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	PVideoInputDevice_DirectShow: constructor
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	Open(Live! Cam Notebook Pro #2,0)
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	IsOpen()
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	InitializeCapture()
> 2007/07/03 10:56:00.321	  0:02.540	       ekiga	PVidDirectShow	Initialize_Interfaces()
> 2007/07/03 10:56:00.462	  0:02.672	       ekiga	PVidDirectShow	SetDevice(Live! Cam Notebook Pro #2)
> 2007/07/03 10:56:00.462	  0:02.679	       ekiga	PVidDirectShow	SetDevice() current capture device 'Live! Cam Notebook Pro #2'
> 2007/07/03 10:56:00.540	  0:02.755	       ekiga	PVidDirectShow	SetDevice() This one is kept 'Live! Cam Notebook Pro #2'
> 2007/07/03 10:56:00.555	  0:02.775	       ekiga	PVidDirectShow	ListSupportedFormats()
> 2007/07/03 10:56:00.571	  0:02.781	       ekiga	PVidDirectShow	Fmt[0] = (YUV420P, 320x240, 30fps)
> 2007/07/03 10:56:00.571	  0:02.782	       ekiga	PVidDirectShow	Fmt[1] = (YUV420P, 640x480, 15fps)
> 2007/07/03 10:56:00.571	  0:02.782	       ekiga	PVidDirectShow	Fmt[2] = (YUV420P, 352x288, 30fps)
> 2007/07/03 10:56:00.571	  0:02.783	       ekiga	PVidDirectShow	Fmt[3] = (YUV420P, 176x144, 30fps)
> 2007/07/03 10:56:00.571	  0:02.783	       ekiga	PVidDirectShow	Fmt[4] = (YUV420P, 160x120, 30fps)
> 2007/07/03 10:56:00.571	  0:02.783	       ekiga	PVidDirectShow	Fmt[5] = (BGR24, 320x240, 30fps)
> 2007/07/03 10:56:00.571	  0:02.783	       ekiga	PVidDirectShow	Fmt[6] = (BGR24, 640x480, 15fps)
> 2007/07/03 10:56:00.571	  0:02.783	       ekiga	PVidDirectShow	Fmt[7] = (BGR24, 352x288, 30fps)
> 2007/07/03 10:56:00.571	  0:02.783	       ekiga	PVidDirectShow	Fmt[8] = (BGR24, 176x144, 30fps)
> 2007/07/03 10:56:00.571	  0:02.784	       ekiga	PVidDirectShow	Fmt[9] = (BGR24, 160x120, 30fps)
> 2007/07/03 10:56:00.571	  0:02.784	       ekiga	PVidDirectShow	GetDefaultFormat()
> 2007/07/03 10:56:00.571	  0:02.784	       ekiga	PVidDirectShow	Default format is: YUV420P, 320x240, 30fps)
> 2007/07/03 10:56:00.571	  0:02.784	       ekiga	PVidDirectShow	SetColourFormat(YUV420P)
> 2007/07/03 10:56:00.571	  0:02.784	       ekiga	PVidDirectShow	SetFormat("YUV420P", 320x240, 30fps)
> 2007/07/03 10:56:00.571	  0:02.785	       ekiga	PVidDirectShow	Using setting [0] = (YUV420P, 320x240, 30fps, max:30fps)
> 2007/07/03 10:56:00.665	  0:02.855	       ekiga	PVidDirectShow	Ok
> 2007/07/03 10:56:00.665	  0:02.855	       ekiga	PVidDev	SetColourFormatConverter success for native YUV420P
> 2007/07/03 10:56:00.665	  0:02.855	       ekiga	PVidDirectShow	SetFrameRate(30fps)
> 2007/07/03 10:56:00.665	  0:02.855	       ekiga	PVidDirectShow	SetFormat("YUV420P", 320x240, 30fps)
> 2007/07/03 10:56:00.665	  0:02.856	       ekiga	PVidDirectShow	Using setting [0] = (YUV420P, 320x240, 30fps, max:30fps)
> 2007/07/03 10:56:00.665	  0:02.857	       ekiga	PVidDirectShow	Ok
> 2007/07/03 10:56:00.665	  0:02.857	       ekiga	PVidDirectShow	SetFrameSize(176, 144)
> 2007/07/03 10:56:00.665	  0:02.857	       ekiga	PVidDirectShow	SetFormat("YUV420P", 176x144, 30fps)
> 2007/07/03 10:56:00.665	  0:02.859	       ekiga	PVidDirectShow	Using setting [3] = (YUV420P, 176x144, 30fps, max:30fps)
> 2007/07/03 10:56:00.665	  0:02.860	       ekiga	PVidDirectShow	Ok
> 2007/07/03 10:56:00.665	  0:02.860	       ekiga	PVidDirectShow	SetFrameSize 176x144 is suported in hardware
> 2007/07/03 10:56:00.665	  0:02.860	       ekiga	PVidDev	SetFrameSize to 176x144
> 2007/07/03 10:56:00.665	  0:02.861	       ekiga	PVidDirectShow	set frame size 176x144  frameBytes=38016
> 2007/07/03 10:56:00.665	  0:02.861	       ekiga	PVidDirectShow	Start()
> 2007/07/03 10:56:02.759	  0:04.947	       ekiga	PVidDev	SetFrameSize to 176x144
> 2007/07/03 10:56:02.759	  0:04.947	       ekiga	PVidDev	SetColourFormatConverter, want YUV420P trying RGB32
> 2007/07/03 10:56:02.759	  0:04.947	       ekiga	PVidDev	SetColourFormatConverter, want YUV420P trying BGR32
> 2007/07/03 10:56:02.759	  0:04.947	       ekiga	PVidDev	SetColourFormatConverter, want YUV420P trying RGB24
> 2007/07/03 10:56:02.759	  0:04.947	       ekiga	PVidDev	SetColourFormatConverter set renderer to RGB24
> 2007/07/03 10:56:02.759	  0:04.947	       ekiga	PVidDev	SetColourFormatConverter succeeded for YUV420P and device using RGB24
> 2007/07/03 10:56:02.759	  0:04.947	       ekiga	PVidDirectShow	IsOpen()
> 2007/07/03 10:56:02.759	  0:04.948	       ekiga	PVidDirectShow	GetWhiteness() = 39321
> 2007/07/03 10:56:02.759	  0:04.948	       ekiga	PVidDirectShow	GetBrighness() = 32768
> 2007/07/03 10:56:02.759	  0:04.948	       ekiga	PVidDirectShow	GetColour() = 32768
> 2007/07/03 10:56:02.759	  0:04.948	       ekiga	PVidDirectShow	GetContrast() = 32768
> 2007/07/03 10:56:02.759	  0:04.948	       ekiga	PVidDirectShow	GetHue() = 32768
> 2007/07/03 10:56:02.759	  0:04.948	       ekiga	PVidDirectShow	GetInputDeviceNames()
> 2007/07/03 10:56:02.759	  0:04.958	       ekiga	PVidDirectShow	GetInputDeviceNames() Found this capture device 'Live! Cam Notebook Pro #2'
> 2007/07/03 10:56:02.759	  0:04.958	       ekiga	PVidDirectShow	GetInputDeviceNames() Found this capture device 'Live! Cam Notebook Pro (VFW)'
> 2007/07/03 10:56:02.759	  0:04.958	       ekiga	PVidDirectShow	GetInputDeviceNames() No more video capture device
> 2007/07/03 10:56:02.759	  0:04.958	       ekiga	PVidDirectShow	PVideoInputDevice_DirectShow: constructor
> 2007/07/03 10:56:02.759	  0:04.958	       ekiga	PVidDirectShow	IsOpen()
> 2007/07/03 10:56:02.774	  0:04.963	Opal Liste...er:3fa6860	Listen	Started listening thread on tcp$135.185.54.110:1720
> 2007/07/03 10:56:02.774	  0:04.963	Opal Liste...er:3fa6860	Listen	Waiting on socket accept on tcp$135.185.54.110:1720
> 2007/07/03 10:56:02.790	  0:04.983	Opal Liste...er:3f6a4a8	Listen	Started listening thread on udp$135.185.54.110:5060
> 2007/07/03 10:56:02.852	  0:05.041	       ekiga	Detected audio codecs: G.711-ALaw-64k,G.711-uLaw-64k,GSM-06.10,iLBC-13k3,SpeexNB,SpeexIETFNarrow-8k,SpeexWNarrow-8k,SpeexWB,SpeexIETFWide-20.6k,SpeexWide-20.6k
> 2007/07/03 10:56:02.930	  0:05.123	       ekiga	Detected video codecs: H.261,H.261-CIF,H.261-QCIF,H.264,MPEG4,MPEG4-CIF,MPEG4-QCIF

> 2007/07/03 10:56:24.009	  0:26.209	       ekiga	SIP	Deleted endpoint.
> 2007/07/03 10:56:24.009	  0:26.209	       ekiga	OpalEP	sip endpoint destroyed.
> 2007/07/03 10:56:24.009	  0:26.210	       ekiga	PCSS	Deleted PC sound system endpoint.
> 2007/07/03 10:56:24.009	  0:26.210	       ekiga	OpalEP	pc endpoint destroyed.
> 2007/07/03 10:56:24.009	  0:26.210	       ekiga	OpalMan	Deleted manager.
> Compiler did not align stack variables. Libavcodec has been miscompiled
> and may be very slow or crash. This is not a bug in libavcodec,
> but in the compiler. Do not report crashes to FFmpeg developers.





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]