[chronojump] Revert "Photocell emitter. Fixed printf issues"

[Xavier Padullés <xpadulles src gnome org>]

commit b3431727ff0d69e17149261a3218f9e86d3a33a2
Author: Xavier Padullés <x padulles gmail com>
Date:   Tue Aug 3 13:00:01 2021 +0200

    Revert "Photocell emitter. Fixed printf issues"
    
    This reverts commit 79132f8579a5729844127476620612a688bce1e4.

 arduino/PhotocellWifi/emitter/emitter.ino | 11 ++++-------
 arduino/lightChro/terminal/terminal.ino   |  2 ++
 2 files changed, 6 insertions(+), 7 deletions(-)
---
diff --git a/arduino/PhotocellWifi/emitter/emitter.ino b/arduino/PhotocellWifi/emitter/emitter.ino
index cd81bd806..5f06a690f 100644
--- a/arduino/PhotocellWifi/emitter/emitter.ino
+++ b/arduino/PhotocellWifi/emitter/emitter.ino
@@ -19,9 +19,9 @@
 
 // Set up nRF24L01 radio on SPI bus plus pins  (CE & CS)
 
-RF24 radio(A3, A4);   //Version 3.2 of photocells
-//RF24 radio(10, 9);  //Version 4.0+ of photocells
+RF24 radio(A3, A4);   //9,10 originalmente , ahora A3,A4
 
+const int intPin = 0;         //Para definir pin interrupción  0 = interrupción  por pin D2
 const int debounceTime = 1;
 bool pinState = LOW;                //estado pin 2 Alto/Bajo
 bool lastPinState = LOW;
@@ -118,10 +118,8 @@ void setup(void)
   //  printf(" Versión Emisor 1.02 \n\r");
   Serial.println("Emitter version 1.03");
   //----------------------------------------------------
-  
-  printf("----");
-  delay(1000);
-  radio.printDetails();  //imprime configuración del emisor
+
+//  radio.printDetails();  //imprime configuración del emisor
 
   //------------------------------------------------------
 
@@ -194,7 +192,6 @@ void controlint()
 }
 
 void debounce(){
-  Serial.println("interrupt");
   MsTimer2::stop();
   debounceFlag = HIGH;
   }
diff --git a/arduino/lightChro/terminal/terminal.ino b/arduino/lightChro/terminal/terminal.ino
index c5128fc55..30124bb61 100644
--- a/arduino/lightChro/terminal/terminal.ino
+++ b/arduino/lightChro/terminal/terminal.ino
@@ -110,6 +110,8 @@ void setup(void)
   //Remember to change comment/uncomment depending on the hardware version
 //  pinMode(7, INPUT_PULLUP);   //Most significant bit
 
+  //¡¡¡¡Atention!!!!, the first version of the hardware the pin7 is associated to the buzzer.
+  //Remember to change comment/uncomment depending on the hardware version
   for (int pin = 6; pin >= 3; pin--)
   {
     sample.termNum = sample.termNum * 2; //Each bit will be multiplied by 2 as much times as his significance