[gnome-color-manager] Update Chinese (Taiwan) translation

From: Damned-Lies <translations src gnome org>
To: commits-list gnome org
Cc:
Subject: [gnome-color-manager] Update Chinese (Taiwan) translation
Date: Wed, 1 Mar 2017 00:55:58 +0000 (UTC)
commit 4e50d3f9f16a135401b5ff81fdbcec9b44dc1598
Author: Chao-Hsiung Liao <j_h_liau yahoo com tw>
Date:   Wed Mar 1 00:55:48 2017 +0000

    Update Chinese (Taiwan) translation

 po/zh_TW.po |  799 ++++++++++++++++++++++++++++++++---------------------------
 1 files changed, 431 insertions(+), 368 deletions(-)
---
diff --git a/po/zh_TW.po b/po/zh_TW.po
index f514c26..34efa08 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -7,34 +7,34 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: gnome-color-manager 2.91.4\n"
-"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-";
+"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=gnome-";
 "color-manager&keywords=I18N+L10N&component=general\n"
-"POT-Creation-Date: 2016-08-15 10:01+0000\n"
-"PO-Revision-Date: 2016-10-09 22:15+0800\n"
-"Last-Translator: Cheng-Chia Tseng <pswo10680 gmail com>\n"
+"POT-Creation-Date: 2017-02-23 16:47+0000\n"
+"PO-Revision-Date: 2017-03-01 06:37+0800\n"
+"Last-Translator: Chao-Hsiung Liao <j_h_liau yahoo com tw>\n"
 "Language-Team: Chinese (Taiwan) <zh-l10n lists linux org tw>\n"
 "Language: zh_TW\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 1.8.8\n"
+"X-Generator: Poedit 1.8.11\n"
 
 #. TRANSLATORS: this is the application name for libcanberra
-#: ../data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in.h:1
-#: ../src/gcm-calibrate-argyll.c:1920 ../src/gcm-calibrate-argyll.c:2007
-#: ../src/gcm-calibrate-argyll.c:2044 ../src/gcm-calibrate-argyll.c:2070
-#: ../src/gcm-calibrate.c:380 ../src/gcm-calibrate.c:416
-#: ../src/gcm-calibrate.c:455 ../src/gcm-calibrate-main.c:182
+#: data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in:7
+#: src/gcm-calibrate-argyll.c:1914 src/gcm-calibrate-argyll.c:2001
+#: src/gcm-calibrate-argyll.c:2038 src/gcm-calibrate-argyll.c:2064
+#: src/gcm-calibrate.c:380 src/gcm-calibrate.c:416 src/gcm-calibrate.c:455
+#: src/gcm-calibrate-main.c:182
 msgid "GNOME Color Manager"
 msgstr "GNOME 顏色管理員"
 
-#: ../data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in.h:2
-#: ../data/org.gnome.ColorProfileViewer.desktop.in.h:2
+#: data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in:8
+#: data/org.gnome.ColorProfileViewer.desktop.in:4
 msgid "Inspect and compare installed color profiles"
 msgstr "檢查並比較已安裝的色彩描述檔"
 
-#: ../data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in.h:3
+#: data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in:10
 msgid ""
 "GNOME Color Profile Viewer shows installed color profiles on your system and "
 "allows you to calibrate displays, printers and cameras using a wizard."
@@ -42,329 +42,357 @@ msgstr ""
 "GNOME 色彩描述檔檢視器可顯示您系統上安裝的色彩描述檔，並讓您使用精靈校準顯示"
 "器、印表機、攝影機。"
 
-#: ../data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in.h:4
+#: data/appdata/org.gnome.ColorProfileViewer.appdata.xml.in:15
 msgid ""
 "This functionality is typically used by GNOME Control Center from the color "
 "panel although can be used on its own."
 msgstr "此功能通常經由 GNOME 控制中心的顏色面板使用，但也可自行使用。"
 
-#: ../data/gcm-calibrate.desktop.in.h:1
+#: data/gcm-calibrate.desktop.in:3
 msgid "Color"
 msgstr "顏色"
 
-#: ../data/gcm-calibrate.desktop.in.h:2
+#: data/gcm-calibrate.desktop.in:4
 msgid "Color Calibration"
 msgstr "色彩校準"
 
-#: ../data/gcm-import.desktop.in.h:1
+#. Translators: Do NOT translate or transliterate this text (this is an icon file name)!
+#: data/gcm-calibrate.desktop.in:6 data/gcm-picker.desktop.in:6
+#: data/org.gnome.ColorProfileViewer.desktop.in:6
+msgid "gnome-color-manager"
+msgstr "gnome-color-manager"
+
+#: data/gcm-import.desktop.in:3
 msgid "ICC Profile Installer"
 msgstr "ICC 色彩描述檔安裝程式"
 
-#: ../data/gcm-import.desktop.in.h:2
+#: data/gcm-import.desktop.in:4
 msgid "Install ICC profiles"
 msgstr "安裝 ICC 色彩描述檔"
 
+#. Translators: Do NOT translate or transliterate this text (this is an icon file name)!
+#: data/gcm-import.desktop.in:10
+msgid "application-vnd.iccprofile"
+msgstr "application-vnd.iccprofile"
+
 #. Window title, where the user can pick spot colors using a measuring device
-#: ../data/gcm-picker.desktop.in.h:1 ../data/gcm-picker.ui.h:2
+#: data/gcm-picker.desktop.in:3 data/gcm-picker.ui:27
 msgid "Color Picker"
 msgstr "顏色挑選器"
 
-#: ../data/gcm-picker.desktop.in.h:2
+#: data/gcm-picker.desktop.in:4
 msgid "Use the color sensor to sample spot colors"
 msgstr "使用色彩感測器來取樣點色彩"
 
 #. the color representation
 #. TRANSLATORS: this the ICC colorspace type
-#: ../data/gcm-picker.ui.h:4 ../src/gcm-viewer.c:587
+#: data/gcm-picker.ui:93 src/gcm-viewer.c:587
 msgid "XYZ"
 msgstr "XYZ"
 
 #. Lab is the color representation and D50 is the white point
-#: ../data/gcm-picker.ui.h:6
+#: data/gcm-picker.ui:108
 msgid "Lab (D50)"
 msgstr "Lab (D50)"
 
 #. This refers to the amount of ambient light on the sensor
-#: ../data/gcm-picker.ui.h:8
+#: data/gcm-picker.ui:123
 msgid "Media whitepoint"
 msgstr "媒體白點"
 
 #. This refers to the amount of ambient light on the sensor
-#: ../data/gcm-picker.ui.h:10
+#: data/gcm-picker.ui:138
 msgid "Color Temperature"
 msgstr "色溫"
 
 #. This refers to the amount of ambient light on the sensor
-#: ../data/gcm-picker.ui.h:12
+#: data/gcm-picker.ui:153
 msgid "Ambient"
 msgstr "周遭"
 
 #. This is the title to a combobox that switches the RGB conversion between different colorspaces such as 
Adobe RGB and sRGB
 #. The profile colorspace, e.g. RGB
-#: ../data/gcm-picker.ui.h:14 ../data/gcm-viewer.ui.h:6
+#: data/gcm-picker.ui:168 data/gcm-viewer.ui:122
 msgid "Colorspace"
 msgstr "色彩空間"
 
 #. These are the values of the chosen color in Red, Green, Blue encoding
 #. TRANSLATORS: this is the colorspace, e.g. red, green, blue
 #. TRANSLATORS: this the ICC colorspace type
-#: ../data/gcm-picker.ui.h:16 ../src/gcm-utils.c:285 ../src/gcm-viewer.c:607
+#: data/gcm-picker.ui:183 src/gcm-utils.c:285 src/gcm-viewer.c:607
 msgid "RGB"
 msgstr "RGB"
 
 #. This shows the error in the conversion to RGB.
-#: ../data/gcm-picker.ui.h:18
+#: data/gcm-picker.ui:198
 msgid "Error"
 msgstr "錯誤"
 
 #. Expander title, the results from the color picker
-#: ../data/gcm-picker.ui.h:20
+#: data/gcm-picker.ui:297
 msgid "Results"
 msgstr "結果"
 
 #. Button text, to get a single sample of color
-#: ../data/gcm-picker.ui.h:22
+#: data/gcm-picker.ui:328
 msgid "_Measure"
 msgstr "測量(_M)"
 
-#: ../data/gcm-viewer.ui.h:1
+#: data/gcm-viewer.ui:52
 msgid "Add a profile for the device"
 msgstr "加入這個裝置的描述檔"
 
-#: ../data/gcm-viewer.ui.h:2
+#: data/gcm-viewer.ui:67
 msgid "Remove a profile from the device"
 msgstr "移除這個裝置的描述檔"
 
 #. The type of profile, e.g. display, scanner, etc.
-#: ../data/gcm-viewer.ui.h:4
+#: data/gcm-viewer.ui:106
 msgid "Profile type"
 msgstr "描述檔類型"
 
 #. When the profile was created
-#: ../data/gcm-viewer.ui.h:8
+#: data/gcm-viewer.ui:138
 msgid "Created"
 msgstr "建立於"
 
 #. The version of the profile
-#: ../data/gcm-viewer.ui.h:10
+#: data/gcm-viewer.ui:155
 msgid "Version"
 msgstr "版本"
 
 #. The manufacturer of the profile
-#: ../data/gcm-viewer.ui.h:12
+#: data/gcm-viewer.ui:172
 msgid "Manufacturer"
 msgstr "製造商"
 
 #. The manufacturer of the profile
-#: ../data/gcm-viewer.ui.h:14
+#: data/gcm-viewer.ui:189
 msgid "Model"
 msgstr "型號"
 
 #. If the profile contains a display correction table
-#: ../data/gcm-viewer.ui.h:16
+#: data/gcm-viewer.ui:205
 msgid "Display correction"
 msgstr "顯示器校正"
 
 #. The basename (the last section of the filename) of the profile
-#: ../data/gcm-viewer.ui.h:18
+#: data/gcm-viewer.ui:221
 msgid "White point"
 msgstr "白點"
 
 #. The licence of the profile, normally non-free
-#: ../data/gcm-viewer.ui.h:20
+#: data/gcm-viewer.ui:238
 msgid "Copyright"
 msgstr "著作權"
 
 #. The file size in bytes of the profile
-#: ../data/gcm-viewer.ui.h:22
+#: data/gcm-viewer.ui:254
 msgid "File size"
 msgstr "檔案大小"
 
 #. The basename (the last section of the filename) of the profile
-#: ../data/gcm-viewer.ui.h:24
+#: data/gcm-viewer.ui:271
 msgid "Filename"
 msgstr "檔案名稱"
 
 #. warnings for the profile
-#: ../data/gcm-viewer.ui.h:26
+#: data/gcm-viewer.ui:288
 msgid "Warnings"
 msgstr "警告"
 
-#: ../data/gcm-viewer.ui.h:27
+#: data/gcm-viewer.ui:474
 msgid "Information"
 msgstr "資訊"
 
-#: ../data/gcm-viewer.ui.h:28
+#: data/gcm-viewer.ui:502
 msgid "y"
 msgstr "y"
 
-#: ../data/gcm-viewer.ui.h:29
+#: data/gcm-viewer.ui:521
 msgid "x"
 msgstr "x"
 
-#: ../data/gcm-viewer.ui.h:30
+#: data/gcm-viewer.ui:552
 msgid "A CIE 1931 diagram shows a 2D representation of the profile gamut"
 msgstr "CIE 1931 圖表顯示的是描述檔色域的 2D 呈現樣貌"
 
-#: ../data/gcm-viewer.ui.h:31
+#: data/gcm-viewer.ui:569
 msgid "CIE 1931"
 msgstr "CIE 1931"
 
-#: ../data/gcm-viewer.ui.h:32
+#: data/gcm-viewer.ui:591
 msgid "Response out"
 msgstr "反應輸出"
 
-#: ../data/gcm-viewer.ui.h:33
+#: data/gcm-viewer.ui:611 data/gcm-viewer.ui:699
 msgid "Response in"
 msgstr "反應輸入"
 
-#: ../data/gcm-viewer.ui.h:34
+#: data/gcm-viewer.ui:640
 msgid ""
 "A tone reproduction curve is the mapping of scene luminance to display "
 "luminance"
 msgstr "色調再製曲線顯示的是場景輝度與顯示器輝度之間的映射關係"
 
-#: ../data/gcm-viewer.ui.h:35
+#: data/gcm-viewer.ui:657
 msgid "TRC"
 msgstr "TRC"
 
-#: ../data/gcm-viewer.ui.h:36
+#: data/gcm-viewer.ui:679
 msgid "Video card out"
 msgstr "顯示卡輸出"
 
-#: ../data/gcm-viewer.ui.h:37
+#: data/gcm-viewer.ui:728
 msgid "A video card gamma table shows the curves loaded into the display"
 msgstr "顯示卡 Gamma 表顯示的是該顯示器載入的曲線"
 
-#: ../data/gcm-viewer.ui.h:38
+#: data/gcm-viewer.ui:745
 msgid "VCGT"
 msgstr "VCGT"
 
-#: ../data/gcm-viewer.ui.h:39
+#: data/gcm-viewer.ui:780 data/gcm-viewer.ui:902
 msgid "Previous Image"
 msgstr "前個影像"
 
 #. This is an example image that is saved in sRGB gamut
-#: ../data/gcm-viewer.ui.h:41
+#: data/gcm-viewer.ui:798 data/gcm-viewer.ui:920
 msgid "sRGB example"
 msgstr "sRGB 樣本"
 
-#: ../data/gcm-viewer.ui.h:42
+#: data/gcm-viewer.ui:829 data/gcm-viewer.ui:951
 msgid "Next Image"
 msgstr "下個影像"
 
-#: ../data/gcm-viewer.ui.h:43
+#: data/gcm-viewer.ui:850
 msgid "This shows what an image would look like if saved with the profile"
 msgstr "這顯示的是若以該描述檔儲存影像時看來會是什麼樣貌"
 
-#: ../data/gcm-viewer.ui.h:44
+#: data/gcm-viewer.ui:867
 msgid "From sRGB"
 msgstr "從 sRGB"
 
-#: ../data/gcm-viewer.ui.h:45
+#: data/gcm-viewer.ui:972
 msgid "This shows what an image would look like if opened with the profile"
 msgstr "這顯示的是若以該描述檔開啟影像時看來會是什麼樣貌"
 
-#: ../data/gcm-viewer.ui.h:46
+#: data/gcm-viewer.ui:989
 msgid "To sRGB"
 msgstr "至 sRGB"
 
-#: ../data/gcm-viewer.ui.h:47
+#: data/gcm-viewer.ui:1040
 msgid "Named colors are specific colors that are defined in the profile"
 msgstr "命名的色彩是描述檔中定義過的特定色彩"
 
-#: ../data/gcm-viewer.ui.h:48
+#: data/gcm-viewer.ui:1057
 msgid "Named Colors"
 msgstr "已命名的色彩"
 
-#: ../data/gcm-viewer.ui.h:49
+#: data/gcm-viewer.ui:1096
 msgid ""
 "Metadata is additional information stored in the profile for programs to use."
 msgstr "中介資料是儲存於描述檔中供程式使用的額外資訊。"
 
-#: ../data/gcm-viewer.ui.h:50
+#: data/gcm-viewer.ui:1113
 msgid "Metadata"
 msgstr "中介資料"
 
-#: ../data/gcm-viewer.ui.h:51
-#: ../data/org.gnome.ColorProfileViewer.desktop.in.h:1
+#: data/gcm-viewer.ui:1133 data/org.gnome.ColorProfileViewer.desktop.in:3
 msgid "Color Profile Viewer"
 msgstr "色彩描述檔檢視器"
 
-#: ../data/org.gnome.ColorProfileViewer.desktop.in.h:3
+#. Translators: Search terms to find this application. Do NOT translate or localize the semicolons! The list 
MUST also end with a semicolon!
+#: data/org.gnome.ColorProfileViewer.desktop.in:13
 msgid "Color;ICC;"
 msgstr "Color;ICC;顏色;"
 
-#: ../src/gcm-calibrate-argyll.c:362
+#. TRANSLATORS: title, default paramters needed to calibrate_argyll
+#: src/gcm-calibrate-argyll.c:362
 msgid "Getting default parameters"
 msgstr "正在取得預設的參數"
 
-#: ../src/gcm-calibrate-argyll.c:367
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:367
 msgid ""
 "This pre-calibrates the screen by sending colored and gray patches to your "
 "screen and measuring them with the hardware device."
 msgstr ""
 "這樣會預先校準螢幕，它會傳送有顏色與灰階的色塊到螢幕上並以硬體裝置測量它們。"
 
-#: ../src/gcm-calibrate-argyll.c:445
+#. TRANSLATORS: title, patches are specific colours used in calibration
+#: src/gcm-calibrate-argyll.c:445
 msgid "Reading the patches"
 msgstr "正在讀取色塊"
 
-#: ../src/gcm-calibrate-argyll.c:450
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:450
 msgid "Reading the patches using the color measuring instrument."
 msgstr "正在使用顏色測量儀器讀取色塊。"
 
-#: ../src/gcm-calibrate-argyll.c:538
+#. TRANSLATORS: title, drawing means painting to the screen
+#: src/gcm-calibrate-argyll.c:538
 msgid "Drawing the patches"
 msgstr "正在繪製色塊"
 
-#: ../src/gcm-calibrate-argyll.c:543
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:543
 msgid ""
 "Drawing the generated patches to the screen, which will then be measured by "
 "the hardware device."
 msgstr "在螢幕上繪出產生的色塊，好用來讓硬體裝置測量。"
 
-#: ../src/gcm-calibrate-argyll.c:628 ../src/gcm-calibrate-argyll.c:919
+#. TRANSLATORS: title, a profile is a ICC file
+#: src/gcm-calibrate-argyll.c:628 src/gcm-calibrate-argyll.c:919
 msgid "Generating the profile"
 msgstr "正在產生描述檔"
 
-#: ../src/gcm-calibrate-argyll.c:633
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:633
 msgid "Generating the ICC color profile that can be used with this screen."
 msgstr "正在產生用於這個螢幕的 ICC 色彩描述檔。"
 
-#: ../src/gcm-calibrate-argyll.c:773
+#. TRANSLATORS: title, a profile is a ICC file
+#: src/gcm-calibrate-argyll.c:773
 msgid "Copying files"
 msgstr "正在複製檔案"
 
-#: ../src/gcm-calibrate-argyll.c:778
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:778
 msgid "Copying source image, chart data and CIE reference values."
 msgstr "正在複製來源影像、圖表資料和 CIE 參考數值。"
 
-#: ../src/gcm-calibrate-argyll.c:826
+#. TRANSLATORS: title, drawing means painting to the screen
+#: src/gcm-calibrate-argyll.c:826
 msgid "Measuring the patches"
 msgstr "正在測量色塊"
 
-#: ../src/gcm-calibrate-argyll.c:831
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:831
 msgid "Detecting the reference patches and measuring them."
 msgstr "正在偵測參考色塊並測量它們。"
 
-#: ../src/gcm-calibrate-argyll.c:924
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:924
 msgid "Generating the ICC color profile that can be used with this device."
 msgstr "產生這個裝置可適用的 ICC 色彩描述檔。"
 
-#: ../src/gcm-calibrate-argyll.c:1242
+#. TRANSLATORS: title, patches are specific colors used in calibration
+#: src/gcm-calibrate-argyll.c:1236
 msgid "Printing patches"
 msgstr "正在列印色塊"
 
-#: ../src/gcm-calibrate-argyll.c:1247
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:1241
 msgid "Rendering the patches for the selected paper and ink."
 msgstr "正在以選取的紙張和墨水繪製色塊。"
 
-#: ../src/gcm-calibrate-argyll.c:1571
+#. TRANSLATORS: title, patches are specific colours used in calibration
+#: src/gcm-calibrate-argyll.c:1565
 msgid "Wait for the ink to dry"
 msgstr "等待墨水乾掉"
 
-#: ../src/gcm-calibrate-argyll.c:1576
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:1570
 msgid ""
 "Please wait a few minutes for the ink to dry. Profiling damp ink will "
 "produce a poor profile and may damage your color measuring instrument."
@@ -372,45 +400,53 @@ msgstr ""
 "請等候幾分鐘讓墨水乾掉。使用未乾的墨水會產生不良的描述檔並且可能損壞您的顏色"
 "測量儀器。"
 
-#: ../src/gcm-calibrate-argyll.c:1720
+#. TRANSLATORS: title, instrument refers to a calibration device
+#: src/gcm-calibrate-argyll.c:1714
 msgid "Set up instrument"
 msgstr "設定儀器"
 
-#: ../src/gcm-calibrate-argyll.c:1725
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:1719
 msgid "Setting up the instrument for use…"
 msgstr "正在設定要使用的儀器…"
 
-#: ../src/gcm-calibrate-argyll.c:1902 ../src/gcm-calibrate-argyll.c:1967
+#. TRANSLATORS: title, the calibration failed
+#: src/gcm-calibrate-argyll.c:1896 src/gcm-calibrate-argyll.c:1961
 msgid "Calibration error"
 msgstr "校準錯誤"
 
-#: ../src/gcm-calibrate-argyll.c:1907
+#. TRANSLATORS: message, the sample was not read correctly
+#: src/gcm-calibrate-argyll.c:1901
 msgid "The sample could not be read at this time."
 msgstr "在這個時候無法讀取樣本。"
 
-#: ../src/gcm-calibrate-argyll.c:1914 ../src/gcm-calibrate-argyll.c:2038
-#: ../src/gcm-calibrate-argyll.c:2064 ../src/gcm-calibrate-argyll.c:2101
-#: ../src/gcm-calibrate-argyll.c:2128
+#: src/gcm-calibrate-argyll.c:1908 src/gcm-calibrate-argyll.c:2032
+#: src/gcm-calibrate-argyll.c:2058 src/gcm-calibrate-argyll.c:2095
+#: src/gcm-calibrate-argyll.c:2122
 msgid "Retry"
 msgstr "重試"
 
-#: ../src/gcm-calibrate-argyll.c:1973
+#. TRANSLATORS: message, no firmware is available
+#: src/gcm-calibrate-argyll.c:1967
 msgid "No firmware is installed for this instrument."
 msgstr "尚未安裝這個儀器的韌體。"
 
-#: ../src/gcm-calibrate-argyll.c:1978
+#. TRANSLATORS: message, the image wasn't good enough
+#: src/gcm-calibrate-argyll.c:1972
 msgid ""
-"The pattern match wasn't good enough. Ensure you have the correct type of "
+"The pattern match wasn’t good enough. Ensure you have the correct type of "
 "target selected."
 msgstr "圖案的比對不夠好。請確定您選擇了正確的目標類型。"
 
-#: ../src/gcm-calibrate-argyll.c:1984
+#. TRANSLATORS: message, the sensor got no readings
+#: src/gcm-calibrate-argyll.c:1978
 msgid ""
 "The measuring instrument got no valid readings. Please ensure the aperture "
 "is fully open."
 msgstr "測量儀器沒有得到有效的讀取值。請確定光圈是完全打開的。"
 
-#: ../src/gcm-calibrate-argyll.c:1989
+#. TRANSLATORS: message, the colorimeter has got confused
+#: src/gcm-calibrate-argyll.c:1983
 msgid ""
 "The measuring instrument is busy and is not starting up. Please remove the "
 "USB plug and re-insert before trying to use this device."
@@ -418,299 +454,316 @@ msgstr ""
 "這個測量儀器正在忙碌中並且尚未啟動。在使用這個裝置前請將 USB 接頭拔出後重新插"
 "入。"
 
-#: ../src/gcm-calibrate-argyll.c:2027
+#. TRANSLATORS: dialog title
+#: src/gcm-calibrate-argyll.c:2021
 msgid "Reading target"
 msgstr "正在讀取目標"
 
-#: ../src/gcm-calibrate-argyll.c:2032
+#. TRANSLATORS: message, no firmware is available
+#: src/gcm-calibrate-argyll.c:2026
 msgid "Failed to read the strip correctly."
 msgstr "無法正確的讀取線條。"
 
-#: ../src/gcm-calibrate-argyll.c:2053
+#. TRANSLATORS: dialog title
+#: src/gcm-calibrate-argyll.c:2047
 msgid "Reading sample"
 msgstr "正在讀取樣本"
 
-#: ../src/gcm-calibrate-argyll.c:2058
+#. TRANSLATORS: message, the sample read failed due to misread
+#: src/gcm-calibrate-argyll.c:2052
 msgid "Failed to read the color sample correctly."
 msgstr "無法正確的讀取色彩樣本。"
 
 #. TRANSLATORS: dialog title, where %s is a letter like 'A'
-#: ../src/gcm-calibrate-argyll.c:2083
+#: src/gcm-calibrate-argyll.c:2077
 #, c-format
 msgid "Read strip %s rather than %s!"
 msgstr "讀取長條 %s 而不是 %s！"
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2088
-msgid "It looks like you've measured the wrong strip."
+#: src/gcm-calibrate-argyll.c:2082
+msgid "It looks like you’ve measured the wrong strip."
 msgstr "您似乎測量了錯誤的長條。"
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2092
+#: src/gcm-calibrate-argyll.c:2086
 msgid ""
-"If you've really measured the right one, it's okay, it could just be unusual "
+"If you’ve really measured the right one, it’s okay, it could just be unusual "
 "paper."
 msgstr "如果您真的測量了正確的長條，那也沒關係，可能是這張紙太特殊了。"
 
-#: ../src/gcm-calibrate-argyll.c:2117
+#. TRANSLATORS: title, the calibration failed
+#: src/gcm-calibrate-argyll.c:2111
 msgid "Device Error"
 msgstr "裝置錯誤"
 
-#: ../src/gcm-calibrate-argyll.c:2122
+#. TRANSLATORS: message, the sample was not read correctly
+#: src/gcm-calibrate-argyll.c:2116
 msgid "The device could not measure the color spot correctly."
 msgstr "裝置無法正確的測量顏色點。"
 
 #. TRANSLATORS: dialog title, where %s is a letter like 'A'
-#: ../src/gcm-calibrate-argyll.c:2136
+#: src/gcm-calibrate-argyll.c:2130
 #, c-format
 msgid "Ready to read strip %s"
 msgstr "已準備讀取線條 %s"
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2141
+#: src/gcm-calibrate-argyll.c:2135
 msgid ""
 "Place the colorimeter on the area of white next to the letter and click and "
 "hold the measure switch."
 msgstr "將色度計放在文字旁的白色區域，點選並按住測量開關。"
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2145
+#: src/gcm-calibrate-argyll.c:2139
 msgid ""
 "Slowly scan the target line from left to right and release the switch when "
 "you get to the end of the page."
 msgstr "從左到右緩慢的掃描目標行，當您到達紙張結尾時放開開關。"
 
 #. TRANSLATORS: dialog message, the sensor has to be above the line
-#: ../src/gcm-calibrate-argyll.c:2149
+#: src/gcm-calibrate-argyll.c:2143
 msgid ""
 "Ensure the center of the device is properly aligned with the row you are "
 "trying to measure."
 msgstr "請確定裝置的中央正對著您嘗試測量的列。"
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2153
+#: src/gcm-calibrate-argyll.c:2147
 msgid ""
-"If you make a mistake, just release the switch, and you'll get a chance to "
+"If you make a mistake, just release the switch, and you’ll get a chance to "
 "try again."
 msgstr "如果出錯，只要您放開開關，就有機會再試一次。"
 
-#: ../src/gcm-calibrate-argyll.c:2247
+#. TRANSLATORS: title, printing reference files to media
+#: src/gcm-calibrate-argyll.c:2241
 msgid "Printing"
 msgstr "正在列印"
 
-#: ../src/gcm-calibrate-argyll.c:2256
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:2250
 msgid "Preparing the data for the printer."
 msgstr "正在準備印表機的資料。"
 
-#: ../src/gcm-calibrate-argyll.c:2264
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:2258
 msgid "Sending the targets to the printer."
 msgstr "正在傳送目標至印表機。"
 
-#: ../src/gcm-calibrate-argyll.c:2270
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:2264
 msgid "Printing the targets…"
 msgstr "正在列印目標…"
 
-#: ../src/gcm-calibrate-argyll.c:2276
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:2270
 msgid "The printing has finished."
 msgstr "列印已完成。"
 
-#: ../src/gcm-calibrate-argyll.c:2282
+#. TRANSLATORS: dialog message
+#: src/gcm-calibrate-argyll.c:2276
 msgid "The print was aborted."
 msgstr "列印已中止。"
 
-#: ../src/gcm-calibrate.c:348
+#. TRANSLATORS: title, instrument is a hardware color calibration sensor
+#: src/gcm-calibrate.c:348
 msgid "Please attach instrument"
 msgstr "請接上儀器"
 
 #. TRANSLATORS: dialog message, ask user to attach device, and there's an example image
-#: ../src/gcm-calibrate.c:357
+#: src/gcm-calibrate.c:357
 msgid ""
 "Please attach the measuring instrument to the center of the screen on the "
 "gray square like the image below."
 msgstr "請將測量儀器如下圖一樣放在螢幕中央的灰色方塊上。"
 
 #. TRANSLATORS: dialog message, ask user to attach device
-#: ../src/gcm-calibrate.c:360
+#: src/gcm-calibrate.c:360
 msgid ""
 "Please attach the measuring instrument to the center of the screen on the "
 "gray square."
 msgstr "請將測量儀器放在螢幕中央的灰色方塊上。"
 
 #. TRANSLATORS: dialog message, ask user to attach device
-#: ../src/gcm-calibrate.c:367
+#: src/gcm-calibrate.c:367
 msgid ""
 "You will need to hold the device on the screen for the duration of the "
 "calibration."
 msgstr "在校準期間，您需要穩住裝置對準螢幕。"
 
-#: ../src/gcm-calibrate.c:374 ../src/gcm-calibrate.c:399
-#: ../src/gcm-calibrate.c:438
+#: src/gcm-calibrate.c:374 src/gcm-calibrate.c:399 src/gcm-calibrate.c:438
 msgid "Continue"
 msgstr "繼續"
 
-#: ../src/gcm-calibrate.c:392 ../src/gcm-calibrate.c:428
+#. TRANSLATORS: title, instrument is a hardware color calibration sensor
+#: src/gcm-calibrate.c:392 src/gcm-calibrate.c:428
 msgid "Please configure instrument"
 msgstr "請設定儀器"
 
-#: ../src/gcm-calibrate.c:403
+#. TRANSLATORS: this is when the user has to change a setting on the sensor, and we're showing a picture
+#: src/gcm-calibrate.c:403
 msgid ""
 "Please set the measuring instrument to screen mode like the image below."
 msgstr "請將測量儀器如下圖一樣設定為螢幕模式。"
 
-#: ../src/gcm-calibrate.c:408
+#. TRANSLATORS: this is when the user has to change a setting on the sensor
+#: src/gcm-calibrate.c:408
 msgid "Please set the measuring instrument to screen mode."
 msgstr "請將測量儀器設定為螢幕模式。"
 
-#: ../src/gcm-calibrate.c:442
+#. TRANSLATORS: this is when the user has to change a setting on the sensor, and we're showing a picture
+#: src/gcm-calibrate.c:442
 msgid ""
 "Please set the measuring instrument to calibration mode like the image below."
 msgstr "請將測量儀器如下圖一樣設定為校準模式。"
 
-#: ../src/gcm-calibrate.c:447
+#. TRANSLATORS: this is when the user has to change a setting on the sensor
+#: src/gcm-calibrate.c:447
 msgid "Please set the measuring instrument to calibration mode."
 msgstr "請將測量儀器設定為校準模式。"
 
 #. TRANSLATORS: dialog for file->open dialog. A calibration target image is the
 #. * aquired image of the calibration target, e.g. an image file that looks
 #. * a bit like this: http://www.colorreference.de/targets/target.jpg
-#: ../src/gcm-calibrate.c:596
+#: src/gcm-calibrate.c:596
 msgid "Select calibration target image"
 msgstr "選擇校準目標影像"
 
-#: ../src/gcm-calibrate.c:598 ../src/gcm-calibrate.c:640
-#: ../src/gcm-calibrate.c:723 ../src/gcm-viewer.c:373
+#: src/gcm-calibrate.c:598 src/gcm-calibrate.c:640 src/gcm-calibrate.c:723
+#: src/gcm-viewer.c:373
 msgid "_Cancel"
 msgstr "取消(_C)"
 
-#: ../src/gcm-calibrate.c:599 ../src/gcm-calibrate.c:641
-#: ../src/gcm-calibrate.c:724
+#: src/gcm-calibrate.c:599 src/gcm-calibrate.c:641 src/gcm-calibrate.c:724
 msgid "_Open"
 msgstr "開啟(_O)"
 
 #. TRANSLATORS: filter name on the file->open dialog
-#: ../src/gcm-calibrate.c:609
+#: src/gcm-calibrate.c:609
 msgid "Supported images files"
 msgstr "支援的影像檔"
 
 #. TRANSLATORS: filter name on the file->open dialog
-#: ../src/gcm-calibrate.c:616 ../src/gcm-calibrate.c:667
-#: ../src/gcm-viewer.c:399
+#: src/gcm-calibrate.c:616 src/gcm-calibrate.c:667 src/gcm-viewer.c:399
 msgid "All files"
 msgstr "所有檔案"
 
 #. TRANSLATORS: dialog for file->open dialog
-#: ../src/gcm-calibrate.c:638
+#: src/gcm-calibrate.c:638
 msgid "Select CIE reference values file"
 msgstr "選擇 CIE 參考值檔案"
 
 #. TRANSLATORS: filter name on the file->open dialog
-#: ../src/gcm-calibrate.c:660
+#: src/gcm-calibrate.c:660
 msgid "CIE values"
 msgstr "CIE 數值"
 
 #. TRANSLATORS: dialog for file->open dialog
-#: ../src/gcm-calibrate.c:721 ../src/gcm-viewer.c:371
+#: src/gcm-calibrate.c:721 src/gcm-viewer.c:371
 msgid "Select ICC Profile File"
 msgstr "選擇 ICC 描述檔案"
 
-#: ../src/gcm-calibrate-main.c:138
+#: src/gcm-calibrate-main.c:138
 msgid "Calibration is not complete"
 msgstr "校準未完成"
 
-#: ../src/gcm-calibrate-main.c:141
+#: src/gcm-calibrate-main.c:141
 msgid "Are you sure you want to cancel the calibration?"
 msgstr "您確定要取消校準作業嗎？"
 
-#: ../src/gcm-calibrate-main.c:144
+#. TRANSLATORS: button text
+#: src/gcm-calibrate-main.c:144
 msgid "Continue calibration"
 msgstr "繼續校準"
 
-#: ../src/gcm-calibrate-main.c:148
+#. TRANSLATORS: button text
+#: src/gcm-calibrate-main.c:148
 msgid "Cancel and close"
 msgstr "取消並關閉"
 
 #. TRANSLATORS: this is the sound description
-#: ../src/gcm-calibrate-main.c:184
+#: src/gcm-calibrate-main.c:184
 msgid "Profiling completed"
 msgstr "分析已結束"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:415 ../src/gcm-calibrate-main.c:1796
+#: src/gcm-calibrate-main.c:415 src/gcm-calibrate-main.c:1796
 msgid "Failed to calibrate"
 msgstr "無法校準"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:661
+#: src/gcm-calibrate-main.c:661
 msgid "Calibrate your camera"
 msgstr "校準您的相機"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:665
+#: src/gcm-calibrate-main.c:665
 msgid "Calibrate your display"
 msgstr "校準您的顯示器"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:669
+#: src/gcm-calibrate-main.c:669
 msgid "Calibrate your printer"
 msgstr "校準您的印表機"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:673
+#: src/gcm-calibrate-main.c:673
 msgid "Calibrate your device"
 msgstr "校準您的裝置"
 
 #. TRANSLATORS: this is the final intro page text
-#: ../src/gcm-calibrate-main.c:685
+#: src/gcm-calibrate-main.c:685
 msgid ""
 "Any existing screen correction will be temporarily turned off and the "
 "brightness set to maximum."
 msgstr "任何既有的螢幕校正會暫時關閉，此外亮度會設定為最大值。"
 
 #. TRANSLATORS: this is the final intro page text
-#: ../src/gcm-calibrate-main.c:692
+#: src/gcm-calibrate-main.c:692
 msgid "You can cancel this process at any stage by pressing the cancel button."
 msgstr "您可以在任何階段按下取消按按鈕來取消此程序。"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:698
+#: src/gcm-calibrate-main.c:698
 msgid "Introduction"
 msgstr "簡介"
 
-#: ../src/gcm-calibrate-main.c:774
+#: src/gcm-calibrate-main.c:774
 msgid "Show File"
 msgstr "顯示檔案"
 
-#: ../src/gcm-calibrate-main.c:777
+#: src/gcm-calibrate-main.c:777
 msgid "Click here to show the profile"
 msgstr "按一下這裡顯示色彩描述檔"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:797
+#: src/gcm-calibrate-main.c:797
 msgid "All done!"
 msgstr "全部完成！"
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:807
+#: src/gcm-calibrate-main.c:807
 msgid "The camera has been calibrated successfully."
 msgstr "相機已經成功校準。"
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:811
+#: src/gcm-calibrate-main.c:811
 msgid "The display has been calibrated successfully."
 msgstr "顯示器已成功校準。"
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:815
+#: src/gcm-calibrate-main.c:815
 msgid "The printer has been calibrated successfully."
 msgstr "印表機已成功校準。"
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:819
+#: src/gcm-calibrate-main.c:819
 msgid "The device has been calibrated successfully."
 msgstr "裝置已成功校準。"
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:826
+#: src/gcm-calibrate-main.c:826
 msgid ""
 "To view details about the new profile or to undo the calibration visit the "
 "<a href=\"control-center://color\">control center</a>."
@@ -718,7 +771,7 @@ msgstr ""
 "若要檢視有關新描述檔的詳細資料，或是取消校準，請造訪 <a href=\"control-"
 "center://color\">控制中心</a>。"
 
-#: ../src/gcm-calibrate-main.c:835
+#: src/gcm-calibrate-main.c:835
 msgid ""
 "You can use the profile with <a href=\"import-linux\">Linux</a>, <a href="
 "\"import-osx\">Apple OS X</a> and <a href=\"import-windows\">Microsoft "
@@ -729,55 +782,55 @@ msgstr ""
 "檔。"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:847 ../src/gcm-calibrate-main.c:1809
+#: src/gcm-calibrate-main.c:847 src/gcm-calibrate-main.c:1809
 msgid "Summary"
 msgstr "摘要"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:868
+#: src/gcm-calibrate-main.c:868
 msgid "Performing calibration"
 msgstr "正在執行校準作業"
 
-#: ../src/gcm-calibrate-main.c:881
+#: src/gcm-calibrate-main.c:881
 msgid "Calibration is about to start"
 msgstr "即將開始校準"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:899
+#: src/gcm-calibrate-main.c:899
 msgid "Action"
 msgstr "動作"
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:919
+#: src/gcm-calibrate-main.c:919
 msgid "Calibration checklist"
 msgstr "校準檢查清單"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:926
+#: src/gcm-calibrate-main.c:926
 msgid ""
 "Before calibrating the display, it is recommended to configure your display "
 "with the following settings to get optimal results."
 msgstr "在校準顯示器之前，建議依照下列設定值來設定您的顯示器以取得最佳結果。"
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:929
+#: src/gcm-calibrate-main.c:929
 msgid ""
-"You may want to consult the owner's manual for your display on how to "
+"You may want to consult the owner’s manual for your display on how to "
 "achieve these settings."
 msgstr "您可能需要參考顯示器的使用手冊以了解如何完成這些設定值。"
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:932
+#: src/gcm-calibrate-main.c:932
 msgid "Reset your display to the factory defaults."
 msgstr "將顯示器重設為出廠預設值。"
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:935
+#: src/gcm-calibrate-main.c:935
 msgid "Disable dynamic contrast if your display has this feature."
 msgstr "如果您的顯示器有動態對比功能請停用它。"
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:938
+#: src/gcm-calibrate-main.c:938
 msgid ""
 "Configure your display with custom color settings and ensure the RGB "
 "channels are set to the same values."
@@ -785,137 +838,139 @@ msgstr ""
 "將您的顯示器以自訂的顏色設定值來設定，並確定 RGB 頻道都設定為同一數值。"
 
 #. TRANSLATORS: dialog message, addition to bullet item
-#: ../src/gcm-calibrate-main.c:941
+#: src/gcm-calibrate-main.c:941
 msgid "If custom color is not available then use a 6500K color temperature."
 msgstr "如果無法使用自訂顏色，那就使用 6500K 色溫。"
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:944
+#: src/gcm-calibrate-main.c:944
 msgid ""
 "Adjust the display brightness to a comfortable level for prolonged viewing."
 msgstr "調整顯示器亮度至舒適的等級以利長時間觀看。"
 
 #. TRANSLATORS: dialog message, suffix
-#: ../src/gcm-calibrate-main.c:949
+#: src/gcm-calibrate-main.c:949
 msgid ""
 "For best results, the display should have been powered for at least 15 "
 "minutes before starting the calibration."
 msgstr "為了最佳的結果，在開始校準之前顯示器應該開啟至少 15 分鐘。"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:955
+#: src/gcm-calibrate-main.c:955
 msgid "Check Settings"
 msgstr "檢查設定值"
 
-#: ../src/gcm-calibrate-main.c:1000
+#. TRANSLATORS: dialog message saying the argyllcms is not installed
+#: src/gcm-calibrate-main.c:1000
 msgid "Calibration and profiling software is not installed."
 msgstr "尚未安裝校準與分析軟體。"
 
-#: ../src/gcm-calibrate-main.c:1003
+#. TRANSLATORS: dialog message saying the color targets are not installed
+#: src/gcm-calibrate-main.c:1003
 msgid "These tools are required to build color profiles for devices."
 msgstr "這些工具是建立裝置的色彩描述檔時必要的。"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1006
+#: src/gcm-calibrate-main.c:1006
 msgid "More software is required!"
 msgstr "需要更多軟體！"
 
-#: ../src/gcm-calibrate-main.c:1015
+#: src/gcm-calibrate-main.c:1015
 msgid "Install required software"
 msgstr "安裝需要的軟體"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1025
+#: src/gcm-calibrate-main.c:1025
 msgid "Install Tools"
 msgstr "安裝工具"
 
 #. TRANSLATORS: dialog message saying the color targets are not installed
-#: ../src/gcm-calibrate-main.c:1068
+#: src/gcm-calibrate-main.c:1068
 msgid "Common color target files are not installed on this computer."
 msgstr "通用顏色目標檔案沒有安裝在這臺電腦上。"
 
 #. TRANSLATORS: dialog message saying the color targets are not installed
-#: ../src/gcm-calibrate-main.c:1070
+#: src/gcm-calibrate-main.c:1070
 msgid "Color target files are needed to convert the image to a color profile."
 msgstr "需要顏色目標檔案才能將影像轉換為色彩描述檔。"
 
 #. TRANSLATORS: dialog message, asking if it's okay to install them
-#: ../src/gcm-calibrate-main.c:1072
+#: src/gcm-calibrate-main.c:1072
 msgid "Do you want them to be installed?"
 msgstr "您想要安裝它們嗎？"
 
 #. TRANSLATORS: dialog message, if the user has the target file on a CDROM then there's no need for this 
package
-#: ../src/gcm-calibrate-main.c:1074
+#: src/gcm-calibrate-main.c:1074
 msgid "If you already have the correct file, you can skip this step."
 msgstr "如果您已經有正確的檔案，可以略過這個步驟。"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1077
+#: src/gcm-calibrate-main.c:1077
 msgid "Optional data files available"
 msgstr "有可用的選擇性資料檔"
 
-#: ../src/gcm-calibrate-main.c:1086
+#: src/gcm-calibrate-main.c:1086
 msgid "Install Now"
 msgstr "立即安裝"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1097
+#: src/gcm-calibrate-main.c:1097
 msgid "Install Targets"
 msgstr "安裝目標"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1113
+#: src/gcm-calibrate-main.c:1113
 msgid "CMP Digital Target 3"
 msgstr "CMP Digital Target 3"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1117
+#: src/gcm-calibrate-main.c:1117
 msgid "CMP DT 003"
 msgstr "CMP DT 003"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1121
+#: src/gcm-calibrate-main.c:1121
 msgid "ColorChecker"
 msgstr "ColorChecker"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1125
+#: src/gcm-calibrate-main.c:1125
 msgid "ColorChecker DC"
 msgstr "ColorChecker DC"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1129
+#: src/gcm-calibrate-main.c:1129
 msgid "ColorChecker SG"
 msgstr "ColorChecker SG"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1133
+#: src/gcm-calibrate-main.c:1133
 msgid "Hutchcolor"
 msgstr "Hutchcolor"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1137
+#: src/gcm-calibrate-main.c:1137
 msgid "i1 RGB Scan 1.4"
 msgstr "i1 RGB Scan 1.4"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1141
+#: src/gcm-calibrate-main.c:1141
 msgid "IT8.7/2"
 msgstr "IT8.7/2"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1145
+#: src/gcm-calibrate-main.c:1145
 msgid "Laser Soft DC Pro"
 msgstr "Laser Soft DC Pro"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1149
+#: src/gcm-calibrate-main.c:1149
 msgid "QPcard 201"
 msgstr "QPcard 201"
 
 #. TRANSLATORS: dialog message, preface. A calibration target looks like
 #. * this: http://www.colorreference.de/targets/target.jpg
-#: ../src/gcm-calibrate-main.c:1217
+#: src/gcm-calibrate-main.c:1217
 msgid ""
 "Before profiling the device, you have to manually capture an image of a "
 "calibration target and save it as a TIFF image file."
@@ -923,14 +978,14 @@ msgstr ""
 "在分析這個裝置前，您必須手動擷取一張校準目標的影像並將它儲存為 TIFF 影像檔。"
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:1222
+#: src/gcm-calibrate-main.c:1222
 msgid ""
 "Ensure that the contrast and brightness are not changed and color correction "
 "profiles have not been applied."
 msgstr "請確定對比和亮度都沒有改變，而且尚未套用顏色校正描述檔。"
 
 #. TRANSLATORS: dialog message, suffix
-#: ../src/gcm-calibrate-main.c:1225
+#: src/gcm-calibrate-main.c:1225
 msgid ""
 "The device sensor should have been cleaned prior to scanning and the output "
 "file resolution should be at least 200dpi."
@@ -938,117 +993,117 @@ msgstr ""
 "裝置的感測器應該在掃描前先完成清潔，而輸出檔案的解析度應該至少有 200dpi。"
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:1231
+#: src/gcm-calibrate-main.c:1231
 msgid ""
 "Ensure that the white-balance has not been modified by the camera and that "
 "the lens is clean."
 msgstr "請確定白平衡沒有被攝影機修改過，而且鏡頭也是乾淨的。"
 
 #. TRANSLATORS: this is the message body for the chart selection
-#: ../src/gcm-calibrate-main.c:1235
+#: src/gcm-calibrate-main.c:1235
 msgid "Please select the calibration target type."
 msgstr "請選擇校準目標類型。"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1238
+#: src/gcm-calibrate-main.c:1238
 msgid "What target type do you have?"
 msgstr "您有何種目標類型？"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1270
+#: src/gcm-calibrate-main.c:1270
 msgid "Select Target"
 msgstr "選取目標"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1305
+#: src/gcm-calibrate-main.c:1305
 msgid "Choose your display type"
 msgstr "選擇您的顯示器類型"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1312
+#: src/gcm-calibrate-main.c:1312
 msgid "Select the monitor type that is attached to your computer."
 msgstr "選取連接至您電腦的螢幕類型。"
 
-#: ../src/gcm-calibrate-main.c:1314
+#: src/gcm-calibrate-main.c:1314
 msgid "LCD (CCFL backlight)"
 msgstr "LCD (CCFL 背光)"
 
-#: ../src/gcm-calibrate-main.c:1323
+#: src/gcm-calibrate-main.c:1323
 msgid "LCD (White LED backlight)"
 msgstr "LCD (白色 LED 背光)"
 
-#: ../src/gcm-calibrate-main.c:1332
+#: src/gcm-calibrate-main.c:1332
 msgid "LCD (RGB LED backlight)"
 msgstr "LCD (RGB LED 背光)"
 
-#: ../src/gcm-calibrate-main.c:1341
+#: src/gcm-calibrate-main.c:1341
 msgid "LCD (Wide Gamut RGB LED backlight)"
 msgstr "LCD (廣色域 RGB LED 背光)"
 
-#: ../src/gcm-calibrate-main.c:1350
+#: src/gcm-calibrate-main.c:1350
 msgid "LCD (Wide Gamut CCFL backlight)"
 msgstr "LCD (廣色域 CCFL 背光)"
 
-#: ../src/gcm-calibrate-main.c:1359
+#: src/gcm-calibrate-main.c:1359
 msgid "CRT"
 msgstr "CRT"
 
-#: ../src/gcm-calibrate-main.c:1368
+#: src/gcm-calibrate-main.c:1368
 msgid "Plasma"
 msgstr "電漿"
 
-#: ../src/gcm-calibrate-main.c:1377
+#: src/gcm-calibrate-main.c:1377
 msgid "Projector"
 msgstr "投影機"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1389
+#: src/gcm-calibrate-main.c:1389
 msgid "Choose Display Type"
 msgstr "選擇顯示器類型"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1424
+#: src/gcm-calibrate-main.c:1424
 msgid "Choose your display target white point"
 msgstr "選擇您的顯示器目標白點"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1431
+#: src/gcm-calibrate-main.c:1431
 msgid ""
 "Most displays should be calibrated to a CIE D65 illuminant for general usage."
 msgstr "對大多數顯示器來說，一般用途應該以 CIE D65 照度校準。"
 
-#: ../src/gcm-calibrate-main.c:1433
+#: src/gcm-calibrate-main.c:1433
 msgid "CIE D50 (Printing and publishing)"
 msgstr "CIE D50 (列印與出版)"
 
-#: ../src/gcm-calibrate-main.c:1442
+#: src/gcm-calibrate-main.c:1442
 msgid "CIE D55"
 msgstr "CIE D55"
 
-#: ../src/gcm-calibrate-main.c:1451
+#: src/gcm-calibrate-main.c:1451
 msgid "CIE D65 (Photography and graphics)"
 msgstr "CIE D65 (攝影與繪圖)"
 
-#: ../src/gcm-calibrate-main.c:1461
+#: src/gcm-calibrate-main.c:1461
 msgid "CIE D75"
 msgstr "CIE D75"
 
-#: ../src/gcm-calibrate-main.c:1470
+#: src/gcm-calibrate-main.c:1470
 msgid "Native (Already set manually)"
 msgstr "原生 (已經手動設定)"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1482
+#: src/gcm-calibrate-main.c:1482
 msgid "Choose Display Whitepoint"
 msgstr "選擇顯示白點"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1517
+#: src/gcm-calibrate-main.c:1517
 msgid "Choose profiling mode"
 msgstr "請選擇分析模式"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1524
+#: src/gcm-calibrate-main.c:1524
 msgid ""
 "Please indicate if you want to profile a local printer, generate some test "
 "patches, or profile using existing test patches."
@@ -1057,22 +1112,22 @@ msgstr ""
 "析。"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1561
+#: src/gcm-calibrate-main.c:1561
 msgid "Calibration Mode"
 msgstr "校準模式"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1600
+#: src/gcm-calibrate-main.c:1600
 msgid "Choose calibration quality"
 msgstr "選擇校準品質"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1607
+#: src/gcm-calibrate-main.c:1607
 msgid "Higher quality calibration requires many color samples and more time."
 msgstr "較高品質的校準需要許多色彩樣本與更多時間。"
 
 #. TRANSLATORS: this is the message body for the chart selection
-#: ../src/gcm-calibrate-main.c:1611
+#: src/gcm-calibrate-main.c:1611
 msgid ""
 "A higher precision profile provides higher accuracy in color matching but "
 "requires more time for reading the color patches."
@@ -1080,296 +1135,302 @@ msgstr ""
 "較高精準的描述檔在顏色比對時可提供較高的準確度，但是需要更多時間讀取色塊。"
 
 #. TRANSLATORS: this is the message body for the chart selection
-#: ../src/gcm-calibrate-main.c:1614
+#: src/gcm-calibrate-main.c:1614
 msgid "For a typical workflow, a normal precision profile is sufficient."
 msgstr "在一般作業流程中，普通精確度的描述檔就足夠了。"
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:1619
+#: src/gcm-calibrate-main.c:1619
 msgid "The high precision profile also requires more paper and printer ink."
 msgstr "高精準度的描述檔也需要更多的紙張和印表機墨水。"
 
 #. TRANSLATORS: radio options for calibration precision
-#: ../src/gcm-calibrate-main.c:1624
+#: src/gcm-calibrate-main.c:1624
 msgid "Accurate"
 msgstr "精確"
 
-#: ../src/gcm-calibrate-main.c:1625
+#: src/gcm-calibrate-main.c:1625
 msgid "Normal"
 msgstr "一般"
 
-#: ../src/gcm-calibrate-main.c:1626
+#: src/gcm-calibrate-main.c:1626
 msgid "Quick"
 msgstr "快速"
 
-#: ../src/gcm-calibrate-main.c:1633
+#. TRANSLATORS: radio options for calibration precision
+#: src/gcm-calibrate-main.c:1633
 #, c-format
 msgid "(about %u sheet of paper)"
 msgid_plural "(about %u sheets of paper)"
 msgstr[0] "(大約 %u 張紙)"
 
-#: ../src/gcm-calibrate-main.c:1644
+#. TRANSLATORS: radio options for calibration precision
+#: src/gcm-calibrate-main.c:1644
 #, c-format
 msgid "(about %u minute)"
 msgid_plural "(about %u minutes)"
 msgstr[0] "(大約 %u 分鐘)"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1685
+#: src/gcm-calibrate-main.c:1685
 msgid "Calibration Quality"
 msgstr "校準品質"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1718
+#: src/gcm-calibrate-main.c:1718
 msgid "Profile title"
 msgstr "描述檔標題"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1725
+#: src/gcm-calibrate-main.c:1725
 msgid "Choose a title to identify the profile on your system."
 msgstr "選擇要您系統上要辨識的描述檔標題。"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1745
+#: src/gcm-calibrate-main.c:1745
 msgid "Profile Title"
 msgstr "描述檔標題"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1764
+#: src/gcm-calibrate-main.c:1764
 msgid "Insert sensor hardware"
 msgstr "插入感測器硬體"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1771
+#: src/gcm-calibrate-main.c:1771
 msgid "You need to insert sensor hardware to continue."
 msgstr "您需要插入感測器硬體裝置才能繼續。"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1777
+#: src/gcm-calibrate-main.c:1777
 msgid "Sensor Check"
 msgstr "感測器檢查"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1803
+#: src/gcm-calibrate-main.c:1803
 msgid "The device could not be found. Ensure it is plugged in and turned on."
 msgstr "找不到裝置。請確定它已插入並開啟。"
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2035
+#: src/gcm-calibrate-main.c:2035
 msgid "Unknown serial"
 msgstr "不明的序號"
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2040
+#: src/gcm-calibrate-main.c:2040
 msgid "Unknown model"
 msgstr "不明的型號"
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2045
+#: src/gcm-calibrate-main.c:2045
 msgid "Unknown description"
 msgstr "不明的描述"
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2050
+#: src/gcm-calibrate-main.c:2050
 msgid "Unknown manufacturer"
 msgstr "不明的製造商"
 
 #. TRANSLATORS: this is the copyright string, where it might be
 #. * "Copyright (c) 2009 Edward Scissorhands"
 #. * BIG RED FLASHING NOTE: YOU NEED TO USE ASCII ONLY
-#: ../src/gcm-calibrate-main.c:2057
+#: src/gcm-calibrate-main.c:2057
 msgid "Copyright (c)"
 msgstr "著作權所有 (c)"
 
 #. TRANSLATORS: we can make this modal (stay on top of) another window
-#: ../src/gcm-calibrate-main.c:2163 ../src/gcm-picker.c:695
-#: ../src/gcm-viewer.c:1614
+#: src/gcm-calibrate-main.c:2163 src/gcm-picker.c:695 src/gcm-viewer.c:1614
 msgid "Set the parent window to make this modal"
 msgstr "設定上層視窗讓它置頂"
 
 #. TRANSLATORS: show just the one profile, rather than all
-#: ../src/gcm-calibrate-main.c:2166
+#: src/gcm-calibrate-main.c:2166
 msgid "Set the specific device to calibrate"
 msgstr "設定要校準的指定裝置"
 
-#: ../src/gcm-calibrate-main.c:2207
+#: src/gcm-calibrate-main.c:2207
 msgid "No device was specified!"
 msgstr "沒有指定裝置！"
 
 #. TRANSLATORS: this is when there is no profile for the device
-#: ../src/gcm-cell-renderer-profile-text.c:71
+#: src/gcm-cell-renderer-profile-text.c:71
 msgid "No profile"
 msgstr "沒有描述檔"
 
-#: ../src/gcm-cell-renderer-profile-text.c:87
+#: src/gcm-cell-renderer-profile-text.c:87
 #, c-format
 msgid "Default %s"
 msgstr "預設值 %s"
 
 #. TRANSLATORS: this is a profile prefix to signify the
 #. * profile has been auto-generated for this hardware
-#: ../src/gcm-cell-renderer-profile-text.c:102
+#: src/gcm-cell-renderer-profile-text.c:102
 msgid "Default: "
 msgstr "預設值："
 
 #. TRANSLATORS: this is a profile prefix to signify the
 #. * profile his a standard space like AdobeRGB
-#: ../src/gcm-cell-renderer-profile-text.c:107
+#: src/gcm-cell-renderer-profile-text.c:107
 msgid "Colorspace: "
 msgstr "色彩空間："
 
 #. TRANSLATORS: this is a profile prefix to signify the
 #. * profile is a test profile
-#: ../src/gcm-cell-renderer-profile-text.c:112
+#: src/gcm-cell-renderer-profile-text.c:112
 msgid "Test profile: "
 msgstr "測試描述檔："
 
 #. TRANSLATORS: turn on all debugging
-#: ../src/gcm-debug.c:91
+#: src/gcm-debug.c:91
 msgid "Show debugging information for all files"
 msgstr "顯示所有檔案的除錯資訊"
 
-#: ../src/gcm-debug.c:142
+#: src/gcm-debug.c:142
 msgid "Debugging Options"
 msgstr "除錯選項"
 
-#: ../src/gcm-debug.c:142
+#: src/gcm-debug.c:142
 msgid "Show debugging options"
 msgstr "顯示除錯選項"
 
 #. TRANSLATORS: command line option: a list of catalogs to install
-#: ../src/gcm-import.c:91
+#: src/gcm-import.c:91
 msgid "ICC profile to install"
 msgstr "要安裝的 ICC 描述檔"
 
-#: ../src/gcm-import.c:117
+#. TRANSLATORS: nothing was specified on the command line
+#: src/gcm-import.c:117
 msgid "No filename specified"
 msgstr "沒有指定檔案名稱"
 
-#: ../src/gcm-import.c:137 ../src/gcm-viewer.c:1291
+#. TRANSLATORS: could not read file
+#: src/gcm-import.c:137 src/gcm-viewer.c:1291
 msgid "Failed to open ICC profile"
 msgstr "無法開啟 ICC 描述檔"
 
-#: ../src/gcm-import.c:142
+#. TRANSLATORS: parsing error
+#: src/gcm-import.c:142
 #, c-format
 msgid "Failed to parse file: %s"
 msgstr "無法解析檔案：%s"
 
 #. TRANSLATORS: message text
-#: ../src/gcm-import.c:157
+#: src/gcm-import.c:157
 #, c-format
 msgid "Profile description: %s"
 msgstr "描述檔描述：%s"
 
 #. TRANSLATORS: message text
-#: ../src/gcm-import.c:167
+#: src/gcm-import.c:167
 msgid "Profile copyright:"
 msgstr "描述檔著作權："
 
-#: ../src/gcm-import.c:201
+#. TRANSLATORS: color profile already been installed
+#: src/gcm-import.c:201
 msgid "Color profile is already imported"
 msgstr "色彩描述檔已經匯入"
 
-#: ../src/gcm-import.c:204 ../src/gcm-import.c:247
+#: src/gcm-import.c:204 src/gcm-import.c:247
 msgid "Show Details"
 msgstr "顯示詳細資料"
 
 #. TRANSLATORS: the profile type
-#: ../src/gcm-import.c:220
+#: src/gcm-import.c:220
 msgid "Import display color profile?"
 msgstr "是否匯入顯示器色彩描述檔？"
 
 #. TRANSLATORS: the profile type
-#: ../src/gcm-import.c:224
+#: src/gcm-import.c:224
 msgid "Import device color profile?"
 msgstr "是否匯入裝置色彩描述檔？"
 
 #. TRANSLATORS: the profile type
-#: ../src/gcm-import.c:228
+#: src/gcm-import.c:228
 msgid "Import named color profile?"
 msgstr "是否匯入已命名的色彩描述檔？"
 
 #. TRANSLATORS: the profile type
-#: ../src/gcm-import.c:232
+#: src/gcm-import.c:232
 msgid "Import color profile?"
 msgstr "是否匯入色彩描述檔？"
 
 #. TRANSLATORS: button text
-#: ../src/gcm-import.c:246
+#: src/gcm-import.c:246
 msgid "Import"
 msgstr "匯入"
 
-#: ../src/gcm-import.c:271 ../src/gcm-viewer.c:1323
+#. TRANSLATORS: could not read file
+#: src/gcm-import.c:271 src/gcm-viewer.c:1323
 msgid "Failed to import file"
 msgstr "無法匯入檔案"
 
 #. TRANSLATORS: this is the ICC profile description stored in an atom in the XServer
-#: ../src/gcm-inspect.c:53
+#: src/gcm-inspect.c:53
 msgid "Description:"
 msgstr "描述："
 
 #. TRANSLATORS: this is the ICC profile copyright
-#: ../src/gcm-inspect.c:56
+#: src/gcm-inspect.c:56
 msgid "Copyright:"
 msgstr "著作權："
 
 #. TRANSLATORS: the root window of all the screens
-#: ../src/gcm-inspect.c:178
+#: src/gcm-inspect.c:178
 msgid "Root window profile:"
 msgstr "Root 視窗描述檔："
 
 #. TRANSLATORS: the root window of all the screens
-#: ../src/gcm-inspect.c:189
+#: src/gcm-inspect.c:189
 msgid "Root window protocol version:"
 msgstr "Root 視窗通訊協定版本："
 
 #. TRANSLATORS: no DBus session bus
-#: ../src/gcm-inspect.c:210 ../src/gcm-inspect.c:273 ../src/gcm-utils.c:110
+#: src/gcm-inspect.c:210 src/gcm-inspect.c:273 src/gcm-utils.c:110
 msgid "Failed to connect to session bus:"
 msgstr "無法連線至作業階段匯流排："
 
 #. TRANSLATORS: the DBus method failed
-#: ../src/gcm-inspect.c:227 ../src/gcm-inspect.c:290 ../src/gcm-utils.c:133
+#: src/gcm-inspect.c:227 src/gcm-inspect.c:290 src/gcm-utils.c:133
 msgid "The request failed:"
 msgstr "要求已失敗："
 
 #. TRANSLATORS: no profile has been asigned to this device
-#: ../src/gcm-inspect.c:235
+#: src/gcm-inspect.c:235
 msgid "There are no ICC profiles assigned to this file"
 msgstr "沒有指派 ICC 描述檔給這個檔案"
 
 #. TRANSLATORS: this is a list of profiles suitable for the device
-#: ../src/gcm-inspect.c:240 ../src/gcm-inspect.c:306
+#: src/gcm-inspect.c:240 src/gcm-inspect.c:306
 msgid "Suitable profiles for:"
 msgstr "描述檔適用於："
 
 #. TRANSLATORS: no profile has been asigned to this window
-#: ../src/gcm-inspect.c:301
+#: src/gcm-inspect.c:301
 msgid "There are no ICC profiles for this window"
 msgstr "這個視窗沒有 ICC 描述檔"
 
 #. TRANSLATORS: command line option
-#: ../src/gcm-inspect.c:326
+#: src/gcm-inspect.c:326
 msgid "Show xserver properties"
 msgstr "顯示 xserver 屬性"
 
 #. TRANSLATORS: command line option
-#: ../src/gcm-inspect.c:329
+#: src/gcm-inspect.c:329
 msgid "Get the profiles for a specific file"
 msgstr "取得指定檔案的描述檔"
 
 #. TRANSLATORS: command line option
-#: ../src/gcm-inspect.c:332
+#: src/gcm-inspect.c:332
 msgid "Get the profile for a specific window"
 msgstr "取得指定視窗的描述檔"
 
 #. TRANSLATORS: command line option
-#: ../src/gcm-inspect.c:335
+#: src/gcm-inspect.c:335
 msgid "Dump all details about this system"
 msgstr "傾印關於這個系統的所有詳細資料"
 
 #. TRANSLATORS: just dumps the EDID to disk
-#: ../src/gcm-inspect.c:348
+#: src/gcm-inspect.c:348
 msgid "EDID inspect program"
 msgstr "EDID 檢查程式"
 
@@ -1377,363 +1438,365 @@ msgstr "EDID 檢查程式"
 #. TRANSLATORS: this is when the ambient light level is unknown
 #. TRANSLATORS: this the ICC profile type
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-picker.c:214 ../src/gcm-picker.c:221 ../src/gcm-viewer.c:579
-#: ../src/gcm-viewer.c:626
+#: src/gcm-picker.c:214 src/gcm-picker.c:221 src/gcm-viewer.c:579
+#: src/gcm-viewer.c:626
 msgid "Unknown"
 msgstr "不明"
 
-#: ../src/gcm-picker.c:334
+#. TRANSLATORS: this is displayed the user has not got suitable hardware
+#: src/gcm-picker.c:334
 msgid "No colorimeter is attached."
 msgstr "並未連接色度計。"
 
-#: ../src/gcm-picker.c:350
+#. TRANSLATORS: this is displayed if VTE support is not enabled
+#: src/gcm-picker.c:350
 msgid "The sensor has no native driver."
 msgstr "感測器沒有原生驅動程式。"
 
 #. TRANSLATORS: this is displayed the user has not got suitable hardware
-#: ../src/gcm-picker.c:359
+#: src/gcm-picker.c:359
 msgid "The attached colorimeter is not capable of reading a spot color."
 msgstr "使用的色度計無法讀取顏色點。"
 
 #. TRANSLATORS: this is when there are no profiles that can be used;
 #. * the search term is either "RGB" or "CMYK"
-#: ../src/gcm-picker.c:577
+#: src/gcm-picker.c:577
 #, c-format
 msgid "No %s color spaces available"
 msgstr "沒有可用的 %s 色彩空間"
 
 #. TRANSLATORS: tool that is used to pick colors
-#: ../src/gcm-picker.c:710
+#: src/gcm-picker.c:710
 msgid "GNOME Color Manager Color Picker"
 msgstr "GNOME 顏色管理員顏色挑選器"
 
 #. TRANSLATORS: this is the colorspace, e.g. cyan, magenta, yellow, black
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-utils.c:289 ../src/gcm-viewer.c:619
+#: src/gcm-utils.c:289 src/gcm-viewer.c:619
 msgid "CMYK"
 msgstr "CMYK"
 
 #. TRANSLATORS: this is the colorspace type
-#: ../src/gcm-utils.c:293
+#: src/gcm-utils.c:293
 msgid "gray"
 msgstr "灰色"
 
 #. TRANSLATORS: title, usually we can tell based on the EDID data or output name
-#: ../src/gcm-viewer.c:326
+#: src/gcm-viewer.c:326
 msgid "Permanently delete profile?"
 msgstr "永久刪除描述檔？"
 
 #. TRANSLATORS: dialog message
-#: ../src/gcm-viewer.c:329
+#: src/gcm-viewer.c:329
 msgid ""
 "Are you sure you want to remove this profile from your system permanently?"
 msgstr "您確定要從系統中永久移除這個描述檔？"
 
 #. TRANSLATORS: button, delete a profile
-#: ../src/gcm-viewer.c:332
+#: src/gcm-viewer.c:332
 msgid "Delete"
 msgstr "刪除"
 
-#: ../src/gcm-viewer.c:374
+#: src/gcm-viewer.c:374
 msgid "_Import"
 msgstr "匯入(_I)"
 
 #. TRANSLATORS: filter name on the file->open dialog
-#: ../src/gcm-viewer.c:392
+#: src/gcm-viewer.c:392
 msgid "Supported ICC profiles"
 msgstr "支援的 ICC 描述檔"
 
 #. TRANSLATORS: could not read file
-#: ../src/gcm-viewer.c:424
+#: src/gcm-viewer.c:424
 msgid "Failed to copy file"
 msgstr "無法複製檔案"
 
 #. TRANSLATORS: this the ICC profile type
-#: ../src/gcm-viewer.c:552
+#: src/gcm-viewer.c:552
 msgid "Input device"
 msgstr "輸入裝置"
 
 #. TRANSLATORS: this the ICC profile type
-#: ../src/gcm-viewer.c:556
+#: src/gcm-viewer.c:556
 msgid "Display device"
 msgstr "顯示裝置"
 
 #. TRANSLATORS: this the ICC profile type
-#: ../src/gcm-viewer.c:560
+#: src/gcm-viewer.c:560
 msgid "Output device"
 msgstr "輸出裝置"
 
 #. TRANSLATORS: this the ICC profile type
-#: ../src/gcm-viewer.c:564
+#: src/gcm-viewer.c:564
 msgid "Devicelink"
 msgstr "裝置連結"
 
 #. TRANSLATORS: this the ICC profile type
-#: ../src/gcm-viewer.c:568
+#: src/gcm-viewer.c:568
 msgid "Colorspace conversion"
 msgstr "色彩空間轉換"
 
 #. TRANSLATORS: this the ICC profile kind
-#: ../src/gcm-viewer.c:572
+#: src/gcm-viewer.c:572
 msgid "Abstract"
 msgstr "抽象"
 
 #. TRANSLATORS: this the ICC profile type
-#: ../src/gcm-viewer.c:576
+#: src/gcm-viewer.c:576
 msgid "Named color"
 msgstr "已命名的顏色"
 
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-viewer.c:591
+#: src/gcm-viewer.c:591
 msgid "LAB"
 msgstr "LAB"
 
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-viewer.c:595
+#: src/gcm-viewer.c:595
 msgid "LUV"
 msgstr "LUV"
 
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-viewer.c:599
+#: src/gcm-viewer.c:599
 msgid "YCbCr"
 msgstr "YCbCr"
 
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-viewer.c:603
+#: src/gcm-viewer.c:603
 msgid "Yxy"
 msgstr "Yxy"
 
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-viewer.c:611
+#: src/gcm-viewer.c:611
 msgid "Gray"
 msgstr "灰"
 
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-viewer.c:615
+#: src/gcm-viewer.c:615
 msgid "HSV"
 msgstr "HSV"
 
 #. TRANSLATORS: this the ICC colorspace type
-#: ../src/gcm-viewer.c:623
+#: src/gcm-viewer.c:623
 msgid "CMY"
 msgstr "CMY"
 
 #. TRANSLATORS: e.g. sRGB or adbode RGB
-#: ../src/gcm-viewer.c:659
+#: src/gcm-viewer.c:659
 msgid "Standard space"
 msgstr "標準空間"
 
 #. TRANSLATORS: the raw EDID MD5 of the display device
-#: ../src/gcm-viewer.c:661
+#: src/gcm-viewer.c:661
 msgid "Display checksum"
 msgstr "顯示器校驗碼"
 
-#: ../src/gcm-viewer.c:662
+#: src/gcm-viewer.c:662
 msgid "Display model"
 msgstr "顯示器型號"
 
-#: ../src/gcm-viewer.c:663
+#: src/gcm-viewer.c:663
 msgid "Display serial number"
 msgstr "顯示器序號"
 
 #. TRANSLATORS: the PNPID is a three letter code, e.g. DEL
-#: ../src/gcm-viewer.c:665
+#: src/gcm-viewer.c:665
 msgid "Display PNPID"
 msgstr "顯示器 PNPID"
 
 #. TRANSLATORS: who made the display
-#: ../src/gcm-viewer.c:667
+#: src/gcm-viewer.c:667
 msgid "Display vendor"
 msgstr "顯示器廠商"
 
 #. TRANSLATORS: the raw profile MD5
-#: ../src/gcm-viewer.c:669
+#: src/gcm-viewer.c:669
 msgid "File checksum"
 msgstr "檔案校驗碼"
 
 #. TRANSLATORS: the color framework, e.g. 'colord'
-#: ../src/gcm-viewer.c:671
+#: src/gcm-viewer.c:671
 msgid "Framework product"
 msgstr "框架產品"
 
 #. TRANSLATORS: the framework binary, e.g. gcm-viewer
-#: ../src/gcm-viewer.c:673
+#: src/gcm-viewer.c:673
 msgid "Framework program"
 msgstr "框架程式"
 
 #. TRANSLATORS: the framework release, e.g. '1.22'
-#: ../src/gcm-viewer.c:675
+#: src/gcm-viewer.c:675
 msgid "Framework version"
 msgstr "框架版本"
 
 #. TRANSLATORS: Where the profile data came from, e.g. 'test' or 'standard'
-#: ../src/gcm-viewer.c:677
+#: src/gcm-viewer.c:677
 msgid "Data source type"
 msgstr "資料來源類型"
 
 #. TRANSLATORS: how the qualifier is formatted, e.g. 'ColorSpace.Paper.DPI'
-#: ../src/gcm-viewer.c:679
+#: src/gcm-viewer.c:679
 msgid "Mapping format"
 msgstr "映射格式"
 
 #. TRANSLATORS: The qualifiers for the profile, e.g. 'RGB.Glossy.300dpi'
-#: ../src/gcm-viewer.c:681
+#: src/gcm-viewer.c:681
 msgid "Mapping qualifier"
 msgstr "映射修飾元"
 
 #. TRANSLATORS: The original device the profile was made for
-#: ../src/gcm-viewer.c:683
+#: src/gcm-viewer.c:683
 msgid "Mapping device"
 msgstr "映射裝置"
 
 #. TRANSLATORS: The average error when making the profile
-#: ../src/gcm-viewer.c:685
+#: src/gcm-viewer.c:685
 msgid "Delta-E average"
 msgstr "Delta-E 平均值"
 
 #. TRANSLATORS: the maximum error when making the profile
-#: ../src/gcm-viewer.c:687
+#: src/gcm-viewer.c:687
 msgid "Delta-E maximum"
 msgstr "Delta-E 最大值"
 
 #. TRANSLATORS: the RMS error when making the profile
-#: ../src/gcm-viewer.c:689
+#: src/gcm-viewer.c:689
 msgid "Delta-E RMS"
 msgstr "Delta-E RMS"
 
 #. TRANSLATORS: The device name, e.g. 'huey'
-#: ../src/gcm-viewer.c:691
+#: src/gcm-viewer.c:691
 msgid "Calibration device"
 msgstr "校準裝置"
 
 #. TRANSLATORS: screen type e.g. 'glossy' or 'matte'
-#: ../src/gcm-viewer.c:693
+#: src/gcm-viewer.c:693
 msgid "Screen surface finish"
 msgstr "螢幕表面拋光"
 
 #. TRANSLATORS: e.g. DVI or VGA
-#: ../src/gcm-viewer.c:695
+#: src/gcm-viewer.c:695
 msgid "Connection type"
 msgstr "連線類型"
 
 #. TRANSLATORS: e.g. Screen brightness in percent
-#: ../src/gcm-viewer.c:697
+#: src/gcm-viewer.c:697
 msgid "Screen brightness"
 msgstr "螢幕亮度"
 
 #. TRANSLATORS: e.g. the 3D volume of the gamut graph
-#: ../src/gcm-viewer.c:699
+#: src/gcm-viewer.c:699
 msgid "Gamut volume"
 msgstr "色域體積"
 
 #. TRANSLATORS: e.g. what proportion of sRGB is covered
-#: ../src/gcm-viewer.c:701
+#: src/gcm-viewer.c:701
 msgid "sRGB coverage"
 msgstr "sRGB 覆蓋度"
 
 #. TRANSLATORS: e.g. what proportion of AdobeRGB is covered
-#: ../src/gcm-viewer.c:703
+#: src/gcm-viewer.c:703
 msgid "Adobe RGB coverage"
 msgstr "Adobe RGB 覆蓋度"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:799
+#: src/gcm-viewer.c:799
 msgid "No description has been set"
 msgstr "未有設定描述"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:803
+#: src/gcm-viewer.c:803
 msgid "No copyright has been set"
 msgstr "未有設定著作權"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:807
+#: src/gcm-viewer.c:807
 msgid "The display compensation table is invalid"
 msgstr "顯示用補償表無效"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:811
+#: src/gcm-viewer.c:811
 msgid "A scum dot is present for media white"
 msgstr "媒體的白有漂浮雜點"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:815
+#: src/gcm-viewer.c:815
 msgid "The gray axis contains significant amounts of color"
 msgstr "灰軸包含大量色彩"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:819
+#: src/gcm-viewer.c:819
 msgid "The gray axis is non-monotonic"
 msgstr "灰軸非單色調"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:823
+#: src/gcm-viewer.c:823
 msgid "One or more of the primaries are invalid"
 msgstr "一種或多種主色無效"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:827
+#: src/gcm-viewer.c:827
 msgid "The primaries do not add to white"
 msgstr "主色未加到白色中"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:831
+#: src/gcm-viewer.c:831
 msgid "One or more of the primaries is unlikely"
 msgstr "一種或多種主色不像是真的"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:835
+#: src/gcm-viewer.c:835
 msgid "The white is not D50 white"
 msgstr "白色並非 D50 的白"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:839
+#: src/gcm-viewer.c:839
 msgid "The whitepoint temperature is unlikely"
 msgstr "白點溫度不像是真的"
 
 #. TRANSLATORS: the profile is broken
-#: ../src/gcm-viewer.c:843
+#: src/gcm-viewer.c:843
 msgid "Unknown warning type"
 msgstr "不明的警告類型"
 
 #. TRANSLATORS: if the device has a VCGT profile
-#: ../src/gcm-viewer.c:980
+#: src/gcm-viewer.c:980
 msgid "Yes"
 msgstr "是"
 
 #. TRANSLATORS: if the device has a VCGT profile
-#: ../src/gcm-viewer.c:983
+#: src/gcm-viewer.c:983
 msgid "No"
 msgstr "否"
 
 #. TRANSLATORS: profiles that have warnings are useable,
 #. * but may not be any good
-#: ../src/gcm-viewer.c:1009
+#: src/gcm-viewer.c:1009
 msgid "The profile has the following problems:"
 msgstr "該描述檔有下列問題："
 
 #. TRANSLATORS: this is the icc creation date strftime format
-#: ../src/gcm-viewer.c:1101
-msgid "%B %e %Y, %I:%M:%S %p"
+#: src/gcm-viewer.c:1101
+msgid "%B %e %Y, %I∶%M∶%S %p"
 msgstr "%Y年%b%e日,%p %I:%M:%S"
 
 #. TRANSLATORS: this is the tooltip when the profile can be deleted
-#: ../src/gcm-viewer.c:1124
+#: src/gcm-viewer.c:1124
 msgid "Delete this profile"
 msgstr "刪除這個描述檔"
 
 #. TRANSLATORS: this is the tooltip when the profile cannot be deleted
-#: ../src/gcm-viewer.c:1127
+#: src/gcm-viewer.c:1127
 msgid "This profile cannot be deleted"
 msgstr "這個描述檔無法被刪除"
 
 #. TRANSLATORS: show just the one profile, rather than all
-#: ../src/gcm-viewer.c:1617
+#: src/gcm-viewer.c:1617
 msgid "Set the specific profile to show"
 msgstr "設定要顯示的指定描述檔"
 
 #. TRANSLATORS: show just the one filename, rather than all
-#: ../src/gcm-viewer.c:1620
+#: src/gcm-viewer.c:1620
 msgid "Set the specific file to show"
 msgstr "設定要顯示的指定檔案"
[Date Prev][Date Next] [Thread Prev][Thread Next] [Thread Index] [Date Index] [Author Index]