[gnome-continuous-yocto/gnomeostree-3.28-rocko: 6386/8267] documentation: Fixed links for "build-directory" term.
- From: Emmanuele Bassi <ebassi src gnome org>
- To: commits-list gnome org
- Cc:
- Subject: [gnome-continuous-yocto/gnomeostree-3.28-rocko: 6386/8267] documentation: Fixed links for "build-directory" term.
- Date: Sun, 17 Dec 2017 04:46:19 +0000 (UTC)
commit 74bf586c940d20fc5546a60a290545c7c0edecb0
Author: Scott Rifenbark <srifenbark gmail com>
Date: Tue Jun 13 17:47:10 2017 -0700
documentation: Fixed links for "build-directory" term.
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to the
ref-manual broke several links to the id "build-directory". I fixed
these to reference into the ref-manual now.
(From yocto-docs rev: debe2ae8ce203ebe0f1cee0de54124c15df8bb7e)
Signed-off-by: Scott Rifenbark <srifenbark gmail com>
Signed-off-by: Richard Purdie <richard purdie linuxfoundation org>
documentation/bsp-guide/bsp.xml | 2 +-
.../dev-manual/dev-manual-common-tasks.xml | 59 ++++++++++---------
documentation/dev-manual/dev-manual-model.xml | 15 +++--
documentation/dev-manual/dev-manual-newbie.xml | 4 +-
documentation/dev-manual/dev-manual-qemu.xml | 2 +-
documentation/dev-manual/dev-manual-start.xml | 2 +-
documentation/kernel-dev/kernel-dev-maint-appx.xml | 2 +-
documentation/ref-manual/closer-look.xml | 10 ++--
documentation/ref-manual/faq.xml | 5 +-
documentation/ref-manual/introduction.xml | 2 +-
documentation/ref-manual/migration.xml | 2 +-
documentation/ref-manual/ref-classes.xml | 4 +-
documentation/ref-manual/ref-devtool-reference.xml | 2 +-
documentation/ref-manual/ref-structure.xml | 13 ++--
documentation/ref-manual/ref-variables.xml | 56 ++++++++++---------
documentation/ref-manual/technical-details.xml | 4 +-
documentation/ref-manual/usingpoky.xml | 13 ++--
.../sdk-manual/sdk-appendix-customizing.xml | 2 +-
documentation/sdk-manual/sdk-appendix-mars.xml | 8 +-
documentation/sdk-manual/sdk-intro.xml | 2 +-
documentation/sdk-manual/sdk-working-projects.xml | 8 +-
.../toaster-manual/toaster-manual-reference.xml | 2 +-
.../toaster-manual-setup-and-use.xml | 4 +-
.../yocto-project-qs/yocto-project-qs.xml | 2 +-
24 files changed, 117 insertions(+), 108 deletions(-)
---
diff --git a/documentation/bsp-guide/bsp.xml b/documentation/bsp-guide/bsp.xml
index 0dcc65b..9226e5c 100644
--- a/documentation/bsp-guide/bsp.xml
+++ b/documentation/bsp-guide/bsp.xml
@@ -98,7 +98,7 @@
This root is what you add to the
<ulink url='&YOCTO_DOCS_REF_URL;#var-BBLAYERS'><filename>BBLAYERS</filename></ulink>
variable in the <filename>conf/bblayers.conf</filename> file found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
which is established after you run one of the OpenEmbedded build environment
setup scripts (i.e.
<ulink
url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml
b/documentation/dev-manual/dev-manual-common-tasks.xml
index 4a7306f..d73b663 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -655,7 +655,7 @@
<filename><ulink url='&YOCTO_DOCS_REF_URL;#var-BBLAYERS'>BBLAYERS</ulink></filename>
variable in your <filename>conf/bblayers.conf</filename> file,
which is found in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
The following example shows how to enable a layer named
<filename>meta-mylayer</filename>:
<literallayout class='monospaced'>
@@ -1192,7 +1192,7 @@
from within a recipe and using
<filename>EXTRA_IMAGE_FEATURES</filename> from within
your <filename>local.conf</filename> file, which is found in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
</para>
<para>
@@ -1539,7 +1539,7 @@
<para>
To run the tool, you just need to be in your
- <link linkend='build-directory'>Build Directory</link>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
and have sourced the build environment setup script
(i.e.
<ulink
url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>oe-init-build-env</filename></ulink>
@@ -2027,7 +2027,7 @@
or
<ulink
url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
and you are in the
- <link linkend='build-directory'>Build Directory</link>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
use BitBake to process your recipe.
All you need to provide is the
<filename><replaceable>basename</replaceable></filename> of the recipe as described
@@ -4238,7 +4238,7 @@
combination of multiple libraries you want to build.
You accomplish this through your <filename>local.conf</filename>
configuration file in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
An example configuration would be as follows:
<literallayout class='monospaced'>
MACHINE = "qemux86-64"
@@ -4314,7 +4314,7 @@
<listitem><para>A unique architecture is defined for the Multilib packages,
along with creating a unique deploy folder under
<filename>tmp/deploy/rpm</filename> in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
For example, consider <filename>lib32</filename> in a
<filename>qemux86-64</filename> image.
The possible architectures in the system are "all", "qemux86_64",
@@ -4858,7 +4858,7 @@
or
<ulink
url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
found in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
</para></listitem>
</itemizedlist>
</para>
@@ -4948,7 +4948,7 @@
or
<ulink
url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
script found in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
</para>
<section id='raw-mode'>
@@ -5934,7 +5934,7 @@
or
<ulink
url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>
script found in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
You must also be sure of the state of your build in the
<link linkend='source-directory'>Source Directory</link>.
The following commands run <filename>menuconfig</filename>
@@ -6104,7 +6104,7 @@
placed where the OpenEmbedded build system can find and apply them.
Syntactically, the configuration statement is identical to what would appear
in the <filename>.config</filename> file, which is in the
- <link linkend='build-directory'>Build Directory</link>:
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
<literallayout class='monospaced'>
tmp/work/<replaceable>arch</replaceable>-poky-linux/linux-yocto-<replaceable>release_specific_string</replaceable>/linux-<replaceable>arch</replaceable>-<replaceable>build_type</replaceable>
</literallayout>
@@ -6390,9 +6390,11 @@
machine in a
<link linkend='source-directory'>Source Directory</link>
named <filename>poky</filename>.
- Furthermore, the <link linkend='build-directory'>Build Directory</link> is
- <filename>build</filename> and is located in <filename>poky</filename> and
- the kernel is based on the Linux 3.4 kernel.
+ Furthermore, the
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+ is <filename>build</filename> and is located in
+ <filename>poky</filename> and the kernel is based on the
+ Linux 3.4 kernel.
</para>
<para>
@@ -6593,7 +6595,7 @@
<listitem><para><emphasis>Build for the correct target architecture:</emphasis> Your
selected <ulink
url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
definition within the <filename>local.conf</filename> file in the
- <link linkend='build-directory'>Build Directory</link>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
specifies the target architecture used when building the Linux kernel.
By default, <filename>MACHINE</filename> is set to
<filename>qemux86</filename>, which specifies a 32-bit
@@ -6653,7 +6655,7 @@
Never remove any files by hand from the
<filename>tmp/deploy</filename>
directory inside the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
Always use the various BitBake clean tasks to
clear out previous build artifacts.
For information on the clean tasks, see the
@@ -7018,7 +7020,7 @@
previous bulleted item.</para></listitem>
<listitem><para><emphasis>Point to Your distribution configuration file:</emphasis>
In your <filename>local.conf</filename> file in the
- <link linkend='build-directory'>Build Directory</link>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
set your
<ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO'><filename>DISTRO</filename></ulink>
variable to point to your distribution's configuration file.
@@ -7078,7 +7080,7 @@
<filename>TEMPLATECONF</filename> to locate the directory
from which it gathers configuration information that ultimately
ends up in the
- <link linkend='build-directory'>Build Directory's</link>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
<filename>conf</filename> directory.
By default, <filename>TEMPLATECONF</filename> is set as
follows in the <filename>poky</filename> repository:
@@ -8031,7 +8033,7 @@
setting
<ulink
url='&YOCTO_DOCS_REF_URL;#var-PRSERV_HOST'><filename>PRSERV_HOST</filename></ulink>
in your <filename>local.conf</filename> file in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
<literallayout class='monospaced'>
PRSERV_HOST = "localhost:0"
</literallayout>
@@ -8567,7 +8569,7 @@
<listitem><para>
Open the <filename>local.conf</filename> file
inside your
- <link linkend='build-directory'>Build Directory</link>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
(e.g. <filename>~/poky/build/conf/local.conf</filename>).
</para></listitem>
<listitem><para>
@@ -9025,7 +9027,7 @@
and <ulink
url='&YOCTO_DOCS_REF_URL;#var-EXTRA_IMAGE_FEATURES'><filename>EXTRA_IMAGE_FEATURES</filename></ulink>
variables to your <filename>local.conf</filename> file,
which is found in the
- <link linkend='build-directory'>Build Directory</link>:
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
<literallayout class='monospaced'>
DISTRO_FEATURES_append = " ptest"
EXTRA_IMAGE_FEATURES += "ptest-pkgs"
@@ -9261,8 +9263,8 @@
<para>
By default, the OpenEmbedded build system uses the
- <link linkend='build-directory'>Build Directory</link> when
- building source code.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+ when building source code.
The build process involves fetching the source files, unpacking
them, and then patching them if necessary before the build takes
place.
@@ -9626,7 +9628,7 @@
Using either of the following statements in your
image recipe or from within the
<filename>local.conf</filename> file found in the
- <link linkend='build-directory'>Build Directory</link>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
causes the build system to create a read-only root filesystem:
<literallayout class='monospaced'>
IMAGE_FEATURES = "read-only-rootfs"
@@ -10220,7 +10222,7 @@
<ulink
url='&YOCTO_DOCS_REF_URL;#var-TEST_IMAGE'><filename>TEST_IMAGE</filename></ulink>
variable to "1" in your <filename>local.conf</filename>
file in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
<literallayout class='monospaced'>
TEST_IMAGE = "1"
</literallayout>
@@ -10352,7 +10354,8 @@
$ bitbake <replaceable>image</replaceable> -c testexport
</literallayout>
Exporting the tests places them in the
- <link linkend='build-directory'>Build Directory</link> in
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+ in
<filename>tmp/testexport/</filename><replaceable>image</replaceable>,
which is controlled by the
<filename>TEST_EXPORT_DIR</filename> variable.
@@ -11509,7 +11512,7 @@
release just the source as a tarball.
You can do this by adding the following to the
<filename>local.conf</filename> file found in the
- <link linkend='build-directory'>Build Directory</link>:
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>:
<literallayout class='monospaced'>
INHERIT += "archiver"
ARCHIVER_MODE[src] = "original"
@@ -11724,7 +11727,7 @@
<ulink
url='&YOCTO_DOCS_REF_URL;#ref-classes-report-error'><filename>report-error</filename></ulink>
class by adding the following statement to the end of
your <filename>local.conf</filename> file in your
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
<literallayout class='monospaced'>
INHERIT += "report-error"
</literallayout>
@@ -11783,7 +11786,7 @@
To disable the error reporting feature, simply remove or comment
out the following statement from the end of your
<filename>local.conf</filename> file in your
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
<literallayout class='monospaced'>
INHERIT += "report-error"
</literallayout>
diff --git a/documentation/dev-manual/dev-manual-model.xml b/documentation/dev-manual/dev-manual-model.xml
index 0782f0a..068fd66 100644
--- a/documentation/dev-manual/dev-manual-model.xml
+++ b/documentation/dev-manual/dev-manual-model.xml
@@ -87,7 +87,8 @@
<note>
For a brief list of terms used when describing the development process in the Yocto Project,
- see the "<link linkend='yocto-project-terms'>Yocto Project Terms</link>" section.
+ see the
+ "<ulink url='&YOCTO_DOCS_REF_URL;#yocto-project-terms'>Yocto Project Terms</ulink>" section.
</note>
<para>
@@ -431,8 +432,8 @@
The following figure shows the temporary file structure
created on your host system when the build occurs.
This
- <link linkend='build-directory'>Build Directory</link> contains all the
- source files used during the build.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+ contains all the source files used during the build.
</para>
<para>
@@ -478,7 +479,7 @@
</para></listitem>
<listitem><para><emphasis>Establish the temporary kernel source files</emphasis>:
Temporary kernel source files are kept in the
- <link linkend='build-directory'>Build Directory</link>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
created by the
OpenEmbedded build system when you run BitBake.
If you have never built the kernel in which you are
@@ -1270,7 +1271,7 @@
<listitem><para><emphasis>Find the Source Code:</emphasis>
Temporary source code used by the OpenEmbedded build system
is kept in the
- <link linkend='build-directory'>Build Directory</link>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
See the
"<link linkend='finding-the-temporary-source-code'>Finding Temporary Source Code</link>"
section to learn how to locate the directory that has the
@@ -1364,8 +1365,8 @@
experiment a bit to figure out your solution.
After you have initially built the package, you can iteratively
tweak the source code, which is located in the
- <link linkend='build-directory'>Build Directory</link>, and then
- you can force a re-compile and quickly test your altered code.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
+ and then you can force a re-compile and quickly test your altered code.
Once you settle on a solution, you can then preserve your changes
in the form of patches.
If you are using Quilt for development, see the
diff --git a/documentation/dev-manual/dev-manual-newbie.xml b/documentation/dev-manual/dev-manual-newbie.xml
index 350c6e4..5a3e3ea 100644
--- a/documentation/dev-manual/dev-manual-newbie.xml
+++ b/documentation/dev-manual/dev-manual-newbie.xml
@@ -526,8 +526,8 @@
<filename>meta/files/common-licenses</filename>.
Once the build completes, the list of all licenses found and used during that build are
kept in the
- <link linkend='build-directory'>Build Directory</link> at
- <filename>tmp/deploy/licenses</filename>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
+ at <filename>tmp/deploy/licenses</filename>.
</para>
<para>
diff --git a/documentation/dev-manual/dev-manual-qemu.xml b/documentation/dev-manual/dev-manual-qemu.xml
index 41c1829..80e4b24 100644
--- a/documentation/dev-manual/dev-manual-qemu.xml
+++ b/documentation/dev-manual/dev-manual-qemu.xml
@@ -252,7 +252,7 @@ qemux86" or "qemux86-64".
This example starts QEMU with
<replaceable>MACHINE</replaceable> set to "qemux86".
Assuming a standard
- <link linkend='build-directory'>Build Directory</link>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
<filename>runqemu</filename> automatically finds the
<filename>bzImage-qemux86.bin</filename> image file and
the
diff --git a/documentation/dev-manual/dev-manual-start.xml b/documentation/dev-manual/dev-manual-start.xml
index 0e335e2..6b97c52 100644
--- a/documentation/dev-manual/dev-manual-start.xml
+++ b/documentation/dev-manual/dev-manual-start.xml
@@ -309,7 +309,7 @@
</para></listitem>
<listitem><para>Optionally ensure the <filename>conf/local.conf</filename> configuration file,
which is found in the
- <link linkend='build-directory'>Build Directory</link>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
is set up how you want it.
This file defines many aspects of the build environment including
the target machine architecture through the
diff --git a/documentation/kernel-dev/kernel-dev-maint-appx.xml
b/documentation/kernel-dev/kernel-dev-maint-appx.xml
index 6bb0cf6..7cfcb45 100644
--- a/documentation/kernel-dev/kernel-dev-maint-appx.xml
+++ b/documentation/kernel-dev/kernel-dev-maint-appx.xml
@@ -209,7 +209,7 @@
The files include the final <filename>.config</filename> file, all the <filename>.o</filename>
files, the <filename>.a</filename> files, and so forth.
Since each machine or BSP has its own separate
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
in its own separate branch
of the Git repository, you can easily switch between different builds.
</para>
diff --git a/documentation/ref-manual/closer-look.xml b/documentation/ref-manual/closer-look.xml
index c0f1747..e4a2a02 100644
--- a/documentation/ref-manual/closer-look.xml
+++ b/documentation/ref-manual/closer-look.xml
@@ -114,7 +114,7 @@
<para>
Sourcing the build environment script creates a
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
if one does not already exist.
BitBake uses the Build Directory for all its work during builds.
The Build Directory has a <filename>conf</filename> directory that
@@ -641,7 +641,7 @@
<para>
When the OpenEmbedded build system generates an image or an SDK,
it gets the packages from a package feed area located in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
The
<link linkend='general-yocto-environment-figure'>general Yocto Project Development Environment
figure</link>
shows this package feeds area in the upper-right corner.
@@ -770,7 +770,7 @@
depend on it are re-executed.
</note>
By default, everything is accomplished in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <link linkend='build-directory'>Build Directory</link>,
which has a defined structure.
For additional general information on the Build Directory,
see the
@@ -1430,7 +1430,7 @@
<para>
Images are written out to the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
inside the <filename>tmp/deploy/images/<replaceable>machine</replaceable>/</filename>
folder as shown in the figure.
This folder contains any files expected to be loaded on the
@@ -1545,7 +1545,7 @@
<para>
Once built, the SDK installers are written out to the
<filename>deploy/sdk</filename> folder inside the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
as shown in the figure at the beginning of this section.
Depending on the type of SDK, several variables exist that help
configure these files.
diff --git a/documentation/ref-manual/faq.xml b/documentation/ref-manual/faq.xml
index cdbdd4d..c4b860b 100644
--- a/documentation/ref-manual/faq.xml
+++ b/documentation/ref-manual/faq.xml
@@ -702,7 +702,8 @@
<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
or
<link
linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
- By default, this <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ By default, this
+ <link linkend='build-directory'>Build Directory</link>
is named <filename>build</filename> but can be named
anything you want.
</para>
@@ -765,7 +766,7 @@
<para>
Meanwhile, <filename>DESTDIR</filename> is a path within the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
However, when the recipe builds a native program (i.e. one
that is intended to run on the build machine), that program
is never installed directly to the build machine's root
diff --git a/documentation/ref-manual/introduction.xml b/documentation/ref-manual/introduction.xml
index deaac03..7f6729d 100644
--- a/documentation/ref-manual/introduction.xml
+++ b/documentation/ref-manual/introduction.xml
@@ -953,7 +953,7 @@
<filename>.sh</filename> file that installs
the tools in the <filename>tmp/deploy/sdk</filename>
subdirectory of the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
The installer file has the string "buildtools"
in the name.
</para></listitem>
diff --git a/documentation/ref-manual/migration.xml b/documentation/ref-manual/migration.xml
index 0513b21..5c700bc 100644
--- a/documentation/ref-manual/migration.xml
+++ b/documentation/ref-manual/migration.xml
@@ -821,7 +821,7 @@
<listitem><para>
When buildhistory is enabled, its output is now written
under the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
rather than
<link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>.
Doing so makes it easier to delete
diff --git a/documentation/ref-manual/ref-classes.xml b/documentation/ref-manual/ref-classes.xml
index 2b5cb88..472215c 100644
--- a/documentation/ref-manual/ref-classes.xml
+++ b/documentation/ref-manual/ref-classes.xml
@@ -2393,7 +2393,7 @@ This check was removed for YP 2.3 release
<filename><link linkend='var-PACKAGE_CLASSES'>PACKAGE_CLASSES</link></filename>
variable defined in your <filename>conf/local.conf</filename>
configuration file, which is located in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
When defining the variable, you can specify one or more package types.
Since images are generated from packages, a packaging class is
needed to enable image generation.
@@ -2988,7 +2988,7 @@ This check was removed for YP 2.3 release
as the build progresses, you can enable <filename>rm_work</filename>
by adding the following to your <filename>local.conf</filename> file,
which is found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
<literallayout class='monospaced'>
INHERIT += "rm_work"
</literallayout>
diff --git a/documentation/ref-manual/ref-devtool-reference.xml
b/documentation/ref-manual/ref-devtool-reference.xml
index 99d5a52..64db00e 100644
--- a/documentation/ref-manual/ref-devtool-reference.xml
+++ b/documentation/ref-manual/ref-devtool-reference.xml
@@ -573,7 +573,7 @@
<para>
Use the <filename>devtool create-workspace</filename> command to
create a new workspace layer in your
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
When you create a new workspace layer, it is populated with the
<filename>README</filename> file and the
<filename>conf</filename> directory only.
diff --git a/documentation/ref-manual/ref-structure.xml b/documentation/ref-manual/ref-structure.xml
index b0c4bfe..424b8cc 100644
--- a/documentation/ref-manual/ref-structure.xml
+++ b/documentation/ref-manual/ref-structure.xml
@@ -75,7 +75,8 @@
This directory contains user configuration files and the output
generated by the OpenEmbedded build system in its standard configuration where
the source tree is combined with the output.
- The <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ The
+ <link linkend='build-directory'>Build Directory</link>
is created initially when you <filename>source</filename>
the OpenEmbedded build environment setup script
(i.e.
@@ -212,7 +213,7 @@
<para>
When you run this script, your Yocto Project environment is set
up, a
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
is created, your working directory becomes the Build Directory,
and you are presented with a list of common BitBake targets.
Here is an example:
@@ -246,7 +247,7 @@
<para>
By default, running this script without a
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
argument creates the <filename>build</filename> directory
in your current working directory.
If you provide a Build Directory argument when you
@@ -330,7 +331,7 @@
<listitem><para>
The script's parameters are positionally dependent.
Consequently, you cannot run the script and provide a
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
name without also providing a port number.
In other words, the following syntax is illegal:
<literallayout class='monospaced'>
@@ -386,7 +387,7 @@
<para>
By default, running this script without a
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
argument creates a build directory named
<filename>build</filename>.
If you provide a Build Directory argument and port number when you
@@ -443,7 +444,7 @@
<para>
The OpenEmbedded build system creates the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
when you run one of the build environment setup scripts (i.e.
<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
or
diff --git a/documentation/ref-manual/ref-variables.xml b/documentation/ref-manual/ref-variables.xml
index bd9e517..da4da85 100644
--- a/documentation/ref-manual/ref-variables.xml
+++ b/documentation/ref-manual/ref-variables.xml
@@ -536,7 +536,7 @@
<para role="glossdeffirst">
<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
The directory within the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
in which the OpenEmbedded build system places generated
objects during a recipe's build process.
By default, this directory is the same as the <link
linkend='var-S'><filename>S</filename></link>
@@ -734,7 +734,7 @@
variable to "1", "yes", or "true"
in your <filename>local.conf</filename> file, which is
located in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+ <link linkend='build-directory'>Build Directory</link>:
Here is an example:
<literallayout class='monospaced'>
BB_DANGLINGAPPENDS_WARNONLY = "1"
@@ -759,7 +759,7 @@
Disk space monitoring is disabled by default.
To enable monitoring, add the <filename>BB_DISKMON_DIRS</filename>
variable to your <filename>conf/local.conf</filename> file found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
Use the following form:
<literallayout class='monospaced'>
BB_DISKMON_DIRS =
"<replaceable>action</replaceable>,<replaceable>dir</replaceable>,<replaceable>threshold</replaceable> [...]"
@@ -852,7 +852,7 @@
Defines the disk space and free inode warning intervals.
To set these intervals, define the variable in your
<filename>conf/local.conf</filename> file in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
</para>
<para>
@@ -936,7 +936,7 @@
</literallayout>
Set this variable in your <filename>local.conf</filename>
file in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
</para>
</glossdef>
</glossentry>
@@ -1154,7 +1154,8 @@
<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
Lists the layers to enable during the build.
This variable is defined in the <filename>bblayers.conf</filename> configuration
- file in the <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ file in the
+ <link linkend='build-directory'>Build Directory</link>.
Here is an example:
<literallayout class='monospaced'>
BBLAYERS = " \
@@ -1250,7 +1251,7 @@
BBMULTIFONFIG = "configA configB configC"
</literallayout>
Each configuration file you use must reside in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory's</ulink>
+ <link linkend='build-directory'>Build Directory</link>
<filename>conf/multiconfig</filename> directory
(e.g.
<replaceable>build_directory</replaceable><filename>/conf/multiconfig/configA.conf</filename>).
@@ -1280,7 +1281,7 @@
<filename>PATH</filename> variable.
<note>
If you run BitBake from a directory outside of the
- <ulink url='&YOCTO_DOCS_DEV_URL;build-directory'>Build Directory</ulink>,
+ <link linkend='build-directory'>Build Directory</link>,
you must be sure to set
<filename>BBPATH</filename> to point to the
Build Directory.
@@ -1626,7 +1627,7 @@
<para role="glossdeffirst">
<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
Points to the location of the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
You can define this directory indirectly through the
<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
and
@@ -2595,7 +2596,7 @@
You should only set this variable in the
<filename>local.conf</filename> configuration file found
in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
</para>
<para>
@@ -2805,7 +2806,8 @@
<para role="glossdeffirst">
<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
The destination directory.
- The location in the <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build
Directory</ulink>
+ The location in the
+ <link linkend='build-directory'>Build Directory</link>
where components are installed by the
<link linkend='ref-tasks-install'><filename>do_install</filename></link>
task.
@@ -3116,7 +3118,7 @@
system uses to place images, packages, SDKs and other output
files that are ready to be used outside of the build system.
By default, this directory resides within the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
as <filename>${TMPDIR}/deploy</filename>.
</para>
@@ -3189,7 +3191,7 @@
The directory is machine-specific as it contains the
<filename>${MACHINE}</filename> name.
By default, this directory resides within the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
as <filename>${DEPLOY_DIR}/images/${MACHINE}/</filename>.
</para>
@@ -3794,7 +3796,7 @@
to touch it.
By default, the directory is <filename>downloads</filename>
in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
<literallayout class='monospaced'>
#DL_DIR ?= "${TOPDIR}/downloads"
</literallayout>
@@ -4191,7 +4193,7 @@
<para>
Typically, you configure this variable in your
<filename>local.conf</filename> file, which is found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
Although you can use this variable from within a recipe,
best practices dictate that you do not.
<note>
@@ -4761,7 +4763,7 @@
<para>
You define the <filename>FILESYSTEM_PERMS_TABLES</filename> variable in the
<filename>conf/local.conf</filename> file, which is found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>, to
+ <link linkend='build-directory'>Build Directory</link>, to
point to your custom <filename>fs-perms.txt</filename>.
You can specify more than a single file permissions setting table.
The paths you specify to these files must be defined within the
@@ -5613,7 +5615,7 @@
Typically, you configure this variable in an image recipe.
Although you can use this variable from your
<filename>local.conf</filename> file, which is found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <link linkend='build-directory'>Build Directory</link>,
best practices dictate that you do not.
<note>
To enable extra features from outside the image recipe,
@@ -6562,7 +6564,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
The combined binary is deposited into the
<filename>tmp/deploy</filename> directory, which is part
of the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
</para>
<para>
@@ -7941,7 +7943,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
Specifies the target device for which the image is built.
You define <filename>MACHINE</filename> in the
<filename>local.conf</filename> file found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
By default, <filename>MACHINE</filename> is set to
"qemux86", which is an x86-based architecture machine to
be emulated using QEMU:
@@ -9085,7 +9087,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
This variable, which is set in the
<filename>local.conf</filename> configuration file found in
the <filename>conf</filename> folder of the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <link linkend='build-directory'>Build Directory</link>,
specifies the package manager the OpenEmbedded build system
uses when packaging data.
</para>
@@ -10531,7 +10533,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
build system to attempt before any others by adding
something like the following to the
<filename>local.conf</filename> configuration file in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+ <link linkend='build-directory'>Build Directory</link>:
<literallayout class='monospaced'>
PREMIRRORS_prepend = "\
git://.*/.* http://www.yoctoproject.org/sources/ \n \
@@ -11493,7 +11495,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
<para role="glossdeffirst">
<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
The location in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
where unpacked recipe source code resides.
By default, this directory is
<filename>${</filename><link
linkend='var-WORKDIR'><filename>WORKDIR</filename></link><filename>}/${</filename><link
linkend='var-BPN'><filename>BPN</filename></link><filename>}-${</filename><link
linkend='var-PV'><filename>PV</filename></link><filename>}</filename>,
@@ -12411,7 +12413,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
To enable file removal, set the variable to "1" in your
<filename>conf/local.conf</filename> configuration file
in your:
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
<literallayout class='monospaced'>
SKIP_FILEDEPS = "1"
</literallayout>
@@ -14263,7 +14265,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
The suffix identifies the <filename>libc</filename> variant
for building.
When you are building for multiple variants with the same
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <link linkend='build-directory'>Build Directory</link>,
this mechanism ensures that output for different
<filename>libc</filename> variants is kept separate to
avoid potential conflicts.
@@ -14421,7 +14423,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
<filename>ssh</filename>.
You can set this variable to "1" in your
<filename>local.conf</filename> file in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
to have the OpenEmbedded build system automatically run
these tests after an image successfully builds:
<literallayout class='monospaced'>
@@ -14789,7 +14791,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
files (other than the shared state cache).
By default, the <filename>TMPDIR</filename> variable points
to <filename>tmp</filename> within the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
</para>
<para>
@@ -14924,7 +14926,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
<para role="glossdeffirst">
<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
The top-level
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
BitBake automatically sets this variable when you
initialize your build environment using either
<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
diff --git a/documentation/ref-manual/technical-details.xml b/documentation/ref-manual/technical-details.xml
index 0c94988..b2f1048 100644
--- a/documentation/ref-manual/technical-details.xml
+++ b/documentation/ref-manual/technical-details.xml
@@ -172,7 +172,7 @@
distribution configuration options, compiler tuning options, general common configuration
options, and user configuration options in <filename>local.conf</filename>, which is found
in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
</para>
</section>
</section>
@@ -562,7 +562,7 @@
code.
However, there is still the question of a task's indirect inputs - the
things that were already built and present in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <link linkend='build-directory'>Build Directory</link>.
The checksum (or signature) for a particular task needs to add the hashes
of all the tasks on which the particular task depends.
Choosing which dependencies to add is a policy decision.
diff --git a/documentation/ref-manual/usingpoky.xml b/documentation/ref-manual/usingpoky.xml
index d1ac18f..9fb7417 100644
--- a/documentation/ref-manual/usingpoky.xml
+++ b/documentation/ref-manual/usingpoky.xml
@@ -56,7 +56,8 @@
<para>
The <replaceable>build_dir</replaceable> argument is optional and specifies the directory the
OpenEmbedded build system uses for the build -
- the <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ the
+ <link linkend='build-directory'>Build Directory</link>.
If you do not specify a Build Directory, it defaults to a directory
named <filename>build</filename> in your current working directory.
A common practice is to use a different Build Directory for different targets.
@@ -142,7 +143,7 @@
<para>
Once an image has been built, it often needs to be installed.
The images and kernels built by the OpenEmbedded build system are placed in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink> in
+ <link linkend='build-directory'>Build Directory</link> in
<filename class="directory">tmp/deploy/images</filename>.
For information on how to run pre-built images such as <filename>qemux86</filename>
and <filename>qemuarm</filename>, see the
@@ -978,7 +979,7 @@
Removing
<link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>
(usually <filename>tmp/</filename>, within the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>)
+ <link linkend='build-directory'>Build Directory</link>)
can often fix temporary build issues.
Removing <filename>TMPDIR</filename> is usually a
relatively cheap operation, because task output will be
@@ -1101,7 +1102,7 @@
<link linkend='var-BUILDHISTORY_COMMIT'><filename>BUILDHISTORY_COMMIT</filename></link>
variable to "1" at the end of your
<filename>conf/local.conf</filename> file found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+ <link linkend='build-directory'>Build Directory</link>:
<literallayout class='monospaced'>
INHERIT += "buildhistory"
BUILDHISTORY_COMMIT = "1"
@@ -1359,7 +1360,7 @@
you can enable writing only image information without
any history by adding the following to your
<filename>conf/local.conf</filename> file found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+ <link linkend='build-directory'>Build Directory</link>:
<literallayout class='monospaced'>
INHERIT += "buildhistory"
BUILDHISTORY_COMMIT = "0"
@@ -1645,7 +1646,7 @@
<filename>sync()</filename> calls into the
file system on the principle that if there was a significant
failure, the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <link linkend='build-directory'>Build Directory</link>
contents could easily be rebuilt.
</para></listitem>
<listitem><para>
diff --git a/documentation/sdk-manual/sdk-appendix-customizing.xml
b/documentation/sdk-manual/sdk-appendix-customizing.xml
index 965cccc..1317a79 100644
--- a/documentation/sdk-manual/sdk-appendix-customizing.xml
+++ b/documentation/sdk-manual/sdk-appendix-customizing.xml
@@ -289,7 +289,7 @@
for the SDK alone, create a
<filename>conf/sdk-extra.conf</filename> either in
your
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
or within any layer and put your
<filename>SSTATE_MIRRORS</filename> setting within
that file.
diff --git a/documentation/sdk-manual/sdk-appendix-mars.xml b/documentation/sdk-manual/sdk-appendix-mars.xml
index 9957057..d960b10 100644
--- a/documentation/sdk-manual/sdk-appendix-mars.xml
+++ b/documentation/sdk-manual/sdk-appendix-mars.xml
@@ -392,7 +392,7 @@
<filename>Build System Derived Toolchain:</filename></emphasis>
Select this type if you built the
toolchain as part of the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build
Directory</ulink>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build
Directory</ulink>.
When you select
<filename>Build system derived toolchain</filename>,
you are using the toolchain built and
@@ -418,7 +418,7 @@
toolchain, the path you provide for the
<filename>Toolchain Root Location</filename>
field is the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
from which you run the
<filename>bitbake</filename> command (e.g
<filename>/home/scottrif/poky/build</filename>).</para>
@@ -438,7 +438,7 @@
<ulink
url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
If so, the <filename>MY_QEMU_ROOTFS</filename>
directory is found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
and you would browse to and select that directory
(e.g. <filename>/home/scottrif/build/MY_QEMU_ROOTFS</filename>).
</para>
@@ -487,7 +487,7 @@
<filename>Build system derived toolchain</filename>,
the target kernel you built will be located in
the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
in
<filename>tmp/deploy/images/<replaceable>machine</replaceable></filename>
directory.
diff --git a/documentation/sdk-manual/sdk-intro.xml b/documentation/sdk-manual/sdk-intro.xml
index 6840169..47b9bc7 100644
--- a/documentation/sdk-manual/sdk-intro.xml
+++ b/documentation/sdk-manual/sdk-intro.xml
@@ -215,7 +215,7 @@
built-in <filename>devtool</filename> functionality.
This toolchain is created by running a SDK installer script
or through a
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
that is based on your Metadata configuration or extension for
your targeted device.
The cross-toolchain works with a matching target sysroot.
diff --git a/documentation/sdk-manual/sdk-working-projects.xml
b/documentation/sdk-manual/sdk-working-projects.xml
index 54bc4d7..526d920 100644
--- a/documentation/sdk-manual/sdk-working-projects.xml
+++ b/documentation/sdk-manual/sdk-working-projects.xml
@@ -894,7 +894,7 @@
</emphasis>
Select this type if you built the
toolchain as part of the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build
Directory</ulink>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build
Directory</ulink>.
When you select
<filename>Build system derived toolchain</filename>,
you are using the toolchain built
@@ -925,7 +925,7 @@
the
<filename>Toolchain Root Location</filename>
field is the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
from which you run the
<filename>bitbake</filename> command (e.g
<filename>/home/scottrif/poky/build</filename>).
@@ -949,7 +949,7 @@
If so, the
<filename>MY_QEMU_ROOTFS</filename>
directory is found in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
and you would browse to and select that
directory (e.g.
<filename>/home/scottrif/poky/build/MY_QEMU_ROOTFS</filename>).
@@ -1003,7 +1003,7 @@
<filename>Build system derived toolchain</filename>,
the target kernel you built will be located
in the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>
in
<filename>tmp/deploy/images/<replaceable>machine</replaceable></filename>
directory.
diff --git a/documentation/toaster-manual/toaster-manual-reference.xml
b/documentation/toaster-manual/toaster-manual-reference.xml
index 3a46b61..9bd6127 100644
--- a/documentation/toaster-manual/toaster-manual-reference.xml
+++ b/documentation/toaster-manual/toaster-manual-reference.xml
@@ -879,7 +879,7 @@
When using <filename>manage.py</filename> commands given
a default configuration, you must be sure that your
working directory is set to the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>.
Using <filename>manage.py</filename> commands from the
Build Directory allows Toaster to find the
<filename>toaster.sqlite</filename> file, which is located
diff --git a/documentation/toaster-manual/toaster-manual-setup-and-use.xml
b/documentation/toaster-manual/toaster-manual-setup-and-use.xml
index 966c35d..77291c1 100644
--- a/documentation/toaster-manual/toaster-manual-setup-and-use.xml
+++ b/documentation/toaster-manual/toaster-manual-setup-and-use.xml
@@ -145,7 +145,7 @@
<listitem><para>
From the directory containing the Toaster database,
which by default is the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
invoke the <filename>createsuperuser</filename> command
from <filename>manage.py</filename>:
<literallayout class='monospaced'>
@@ -378,7 +378,7 @@
<para>
This line also runs the <filename>checksettings</filename>
command, which configures the location of the Toaster
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build directory</ulink>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build directory</ulink>.
The Toaster root directory <filename>TOASTER_DIR</filename>
determines where the Toaster build directory
is created on the file system.
diff --git a/documentation/yocto-project-qs/yocto-project-qs.xml
b/documentation/yocto-project-qs/yocto-project-qs.xml
index 5b64e0f..1d9bd9f 100644
--- a/documentation/yocto-project-qs/yocto-project-qs.xml
+++ b/documentation/yocto-project-qs/yocto-project-qs.xml
@@ -528,7 +528,7 @@
$ source &OE_INIT_FILE;
</literallayout>
Among other things, the script creates the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
which is <filename>build</filename> in this case
and is located in the
<ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
