[gnome-continuous-yocto/gnomeostree-3.28-rocko: 2950/8267] README.hardware: Update Genericx86 section

[Emmanuele Bassi <ebassi src gnome org>]

commit d9809e946b36782440cd729a4610744b7b6795fa
Author: Saul Wold <sgw linux intel com>
Date:   Sun Oct 9 08:24:24 2016 -0700

    README.hardware: Update Genericx86 section
    
    This section was truly dated, update with newer hardware that is
    being tested.
    
    Update section on creating USB stick images using wic and alternate EFI_PROVIDER
    information about systemd-boot.
    
    (From meta-yocto rev: 4a8f28e2c18211a2cd1b380b0b2c8d175fe1e51a)
    
    Signed-off-by: Saul Wold <sgw linux intel com>
    Signed-off-by: Richard Purdie <richard purdie linuxfoundation org>

 README.hardware |   82 +++++++++++-------------------------------------------
 1 files changed, 17 insertions(+), 65 deletions(-)
---
diff --git a/README.hardware b/README.hardware
index 9c74c5d..6383bd7 100644
--- a/README.hardware
+++ b/README.hardware
@@ -77,31 +77,22 @@ variable value corresponding to the device is given in brackets.
                       ===============================
 
 
-Intel x86 based PCs and devices (genericx86)
-==========================================
+Intel x86 based PCs and devices (genericx86*)
+=============================================
 
-The genericx86 MACHINE is tested on the following platforms:
+The genericx86 and genericx86-64 MACHINE are tested on the following platforms:
 
 Intel Xeon/Core i-Series:
-  + Intel Romley Server: Sandy Bridge Xeon processor, C600 PCH (Patsburg), (Canoe Pass CRB)
-  + Intel Romley Server: Ivy Bridge Xeon processor, C600 PCH (Patsburg), (Intel SDP S2R3)
-  + Intel Crystal Forest Server: Sandy Bridge Xeon processor, DH89xx PCH (Cave Creek), (Stargo CRB)
-  + Intel Chief River Mobile: Ivy Bridge Mobile processor, QM77 PCH (Panther Point-M), (Emerald Lake II CRB, 
Sabino Canyon CRB)
-  + Intel Huron River Mobile: Sandy Bridge processor, QM67 PCH (Cougar Point), (Emerald Lake CRB, EVOC 
EC7-1817LNAR board)
-  + Intel Calpella Platform: Core i7 processor, QM57 PCH (Ibex Peak-M), (Red Fort CRB, Emerson MATXM 
CORE-411-B)
-  + Intel Nehalem/Westmere-EP Server: Xeon 56xx/55xx processors, 5520 chipset, ICH10R IOH (82801), (Hanlan 
Creek CRB)
-  + Intel Nehalem Workstation: Xeon 56xx/55xx processors, System SC5650SCWS (Greencity CRB)
-  + Intel Picket Post Server: Xeon 56xx/55xx processors (Jasper Forest), 3420 chipset (Ibex Peak), (Osage 
CRB)
-  + Intel Storage Platform: Sandy Bridge Xeon processor, C600 PCH (Patsburg), (Oak Creek Canyon CRB)
-  + Intel Shark Bay Client Platform: Haswell processor, LynxPoint PCH, (Walnut Canyon CRB, Lava Canyon CRB, 
Basking Ridge CRB, Flathead Creek CRB)
-  + Intel Shark Bay Ultrabook Platform: Haswell ULT processor, Lynx Point-LP PCH, (WhiteTip Mountain 1 CRB)
+  + Intel NUC5 Series - ix-52xx Series SOC (Broadwell)
+  + Intel NUC6 Series - ix-62xx Series SOC (Skylake)
+  + Intel Shumway Xeon Server
 
 Intel Atom platforms:
-  + Intel embedded Menlow: Intel Atom Z510/530 CPU, System Controller Hub US15W (Portwell NANO-8044)
-  + Intel Luna Pier: Intel Atom N4xx/D5xx series CPU (aka: Pineview-D & -M), 82801HM I/O Hub (ICH8M), 
(Advantech AIMB-212, Moon Creek CRB)
-  + Intel Queens Bay platform: Intel Atom E6xx CPU (aka: Tunnel Creek), Topcliff EG20T I/O Hub (Emerson 
NITX-315, Crown Bay CRB, Minnow Board)
-  + Intel Fish River Island platform: Intel Atom E6xx CPU (aka: Tunnel Creek), Topcliff EG20T I/O Hub 
(Kontron KM2M806)
-  + Intel Cedar Trail platform: Intel Atom N2000 & D2000 series CPU (aka: Cedarview), NM10 Express Chipset 
(Norco kit BIS-6630, Cedar Rock CRB)
+  + MinnowBoard MAX - E3825 SOC (Bay Trail)
+  + MinnowBoard MAX - Turbot (ADI Engineering) - E3826 SOC (Bay Trail)
+    - These boards can be either 32bot or 64bit modes depending on firmware
+    - See minnowboard.org for details 
+  + Intel Braswell SOC
 
 and is likely to work on many unlisted Atom/Core/Xeon based devices. The MACHINE
 type supports ethernet, wifi, sound, and Intel/vesa graphics by default in
@@ -136,53 +127,14 @@ USB Device:
      device, but the idea is to force BIOS to read the Cylinder/Head/Sector
      geometry from the device.
 
-  2. Without such an option, the BIOS generally boots the device in USB-ZIP
-     mode. To write an image to a USB device that will be bootable in
-     USB-ZIP mode, carry out the following actions:
+  2. Use a ".wic" image with an EFI partition
 
-     a. Determine the geometry of your USB device using fdisk:
+     a) With a default grub-efi bootloader:
+     # dd if=core-image-minimal-genericx86-64.wic of=/dev/sdb
 
-     # fdisk /dev/sdb
-     Command (m for help): p
-
-     Disk /dev/sdb: 4011 MB, 4011491328 bytes
-     124 heads, 62 sectors/track, 1019 cylinders, total 7834944 sectors
-     ...
-
-     Command (m for help): q
-
-     b. Configure the USB device for USB-ZIP mode:
-     
-     # mkdiskimage -4 /dev/sdb 1019 124 62
-
-     Where 1019, 124 and 62 are the cylinder, head and sectors/track counts
-     as reported by fdisk (substitute the values reported for your device).
-     When the operation has finished and the access LED (if any) on the
-     device stops flashing, remove and reinsert the device to allow the
-     kernel to detect the new partition layout.
-
-     c. Copy the contents of the image to the USB-ZIP mode device:
-
-     # mkdir /tmp/image
-     # mkdir /tmp/usbkey
-     # mount -o loop core-image-minimal-genericx86.hddimg  /tmp/image
-     # mount /dev/sdb4 /tmp/usbkey
-     # cp -rf /tmp/image/* /tmp/usbkey
-
-     d. Install the syslinux boot loader:
-
-     # syslinux /dev/sdb4
-
-     e. Unmount everything:
-
-     # umount /tmp/image
-     # umount /tmp/usbkey
-
-  Install the boot device in the target board and configure the BIOS to boot
-  from it.
-
-  For more details on the USB-ZIP scenario, see the syslinux documentation:
-  http://git.kernel.org/?p=boot/syslinux/syslinux.git;a=blob_plain;f=doc/usbkey.txt;hb=HEAD
+     b) Use systemd-boot instead
+     - Build an image with EFI_PROVIDER="systemd-boot" then use the above
+       dd command to write the image to a USB stick.
 
 
 Texas Instruments Beaglebone (beaglebone)