[gnome-continuous-yocto/gnomeostree-3.28-rocko: 2124/8267] dev-manual, ref-manual: Systemd-boot: Update documents for new EFI bootloader
- From: Emmanuele Bassi <ebassi src gnome org>
- To: commits-list gnome org
- Cc:
- Subject: [gnome-continuous-yocto/gnomeostree-3.28-rocko: 2124/8267] dev-manual, ref-manual: Systemd-boot: Update documents for new EFI bootloader
- Date: Sat, 16 Dec 2017 22:47:22 +0000 (UTC)
commit 9ba4fc087ef9609a4a4e7546ee00f9801c2dfac8
Author: Scott Rifenbark <srifenbark gmail com>
Date: Mon Aug 22 14:55:05 2016 -0700
dev-manual, ref-manual: Systemd-boot: Update documents for new EFI bootloader
Fixes [YOCTO #9707]
* Replaced gummiboot with systemd-boot in the dev-manual
* Replaced the gummiboot class with a new systemd-boot class
* Replaced the appropriate gummiboot variables in the glossary
with new variables SYSTEMD_BOOT_CFG, SYSTEMD_BOOT_ENTRIES,
and SYSTEMD_BOOT_TIMEOUT.
(From yocto-docs rev: 778b620e65cc68531b3c41aeb8f27f2a07eb0d00)
Signed-off-by: Scott Rifenbark <srifenbark gmail com>
Signed-off-by: Richard Purdie <richard purdie linuxfoundation org>
.../dev-manual/dev-manual-common-tasks.xml | 26 ++--
documentation/ref-manual/ref-classes.xml | 67 ++++----
documentation/ref-manual/ref-variables.xml | 176 ++++++++++----------
3 files changed, 138 insertions(+), 131 deletions(-)
---
diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml
b/documentation/dev-manual/dev-manual-common-tasks.xml
index 48d3ecb..bd11062 100644
--- a/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -8777,19 +8777,19 @@
within a separately started QEMU or any
other virtual machine manager.
</para></listitem>
- <listitem><para><emphasis>"GummibootTarget":</emphasis>
- Choose "GummibootTarget" if your hardware is
+ <listitem><para><emphasis>"Systemd-bootTarget":</emphasis>
+ Choose "Systemd-bootTarget" if your hardware is
an EFI-based machine with
- <filename>gummiboot</filename> as bootloader and
+ <filename>systemd-boot</filename> as bootloader and
<filename>core-image-testmaster</filename>
(or something similar) is installed.
Also, your hardware under test must be in a
DHCP-enabled network that gives it the same IP
address for each reboot.</para>
- <para>If you choose "GummibootTarget", there are
+ <para>If you choose "Systemd-bootTarget", there are
additional requirements and considerations.
See the
- "<link linkend='selecting-gummiboottarget'>Selecting GummibootTarget</link>"
+ "<link linkend='selecting-systemd-boottarget'>Selecting
Systemd-bootTarget</link>"
section, which follows, for more information.
</para></listitem>
<listitem><para><emphasis>"BeagleBoneTarget":</emphasis>
@@ -8835,12 +8835,12 @@
</para>
</section>
- <section id='selecting-gummiboottarget'>
- <title>Selecting GummibootTarget</title>
+ <section id='selecting-systemd-boottarget'>
+ <title>Selecting Systemd-bootTarget</title>
<para>
If you did not set <filename>TEST_TARGET</filename> to
- "GummibootTarget", then you do not need any information
+ "Systemd-bootTarget", then you do not need any information
in this section.
You can skip down to the
"<link linkend='qemu-image-running-tests'>Running Tests</link>"
@@ -8849,14 +8849,14 @@
<para>
If you did set <filename>TEST_TARGET</filename> to
- "GummibootTarget", you also need to perform a one-time
+ "Systemd-bootTarget", you also need to perform a one-time
setup of your master image by doing the following:
<orderedlist>
<listitem><para><emphasis>Set <filename>EFI_PROVIDER</filename>:</emphasis>
Be sure that <filename>EFI_PROVIDER</filename>
is as follows:
<literallayout class='monospaced'>
- EFI_PROVIDER = "gummiboot"
+ EFI_PROVIDER = "systemd-boot"
</literallayout>
</para></listitem>
<listitem><para><emphasis>Build the master image:</emphasis>
@@ -8920,7 +8920,7 @@
<para>
The final thing you need to do when setting
- <filename>TEST_TARGET</filename> to "GummibootTarget" is
+ <filename>TEST_TARGET</filename> to "Systemd-bootTarget" is
to set up the test image:
<orderedlist>
<listitem><para><emphasis>Set up your <filename>local.conf</filename>
file:</emphasis>
@@ -8929,7 +8929,7 @@
<literallayout class='monospaced'>
IMAGE_FSTYPES += "tar.gz"
INHERIT += "testimage"
- TEST_TARGET = "GummibootTarget"
+ TEST_TARGET = "Systemd-bootTarget"
TEST_TARGET_IP = "192.168.2.3"
</literallayout>
</para></listitem>
@@ -9325,7 +9325,7 @@
The target controller object used to deploy
and start an image on a particular target
(e.g. QemuTarget, SimpleRemote, and
- GummibootTarget).
+ Systemd-bootTarget).
Tests usually use the following:
<itemizedlist>
<listitem><para><emphasis><filename>ip</filename>:</emphasis>
diff --git a/documentation/ref-manual/ref-classes.xml b/documentation/ref-manual/ref-classes.xml
index 1bbd075..97b2995 100644
--- a/documentation/ref-manual/ref-classes.xml
+++ b/documentation/ref-manual/ref-classes.xml
@@ -1099,36 +1099,6 @@
</para>
</section>
-<section id='ref-classes-gummiboot'>
- <title><filename>gummiboot.bbclass</filename></title>
-
- <para>
- The <filename>gummiboot</filename> class provides functions specific
- to the gummiboot bootloader for building bootable images.
- This is an internal class and is not intended to be
- used directly.
- Set the
- <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
- variable to "gummiboot" to use this class.
- </para>
-
- <para>
- For information on more variables used and supported in this class,
- see the
- <link linkend='var-GUMMIBOOT_CFG'><filename>GUMMIBOOT_CFG</filename></link>,
- <link linkend='var-GUMMIBOOT_ENTRIES'><filename>GUMMIBOOT_ENTRIES</filename></link>,
- and
- <link linkend='var-GUMMIBOOT_TIMEOUT'><filename>GUMMIBOOT_TIMEOUT</filename></link>
- variables.
- </para>
-
- <para>
- You can also see the
- <ulink url='http://freedesktop.org/wiki/Software/gummiboot/'>Gummiboot documentation</ulink>
- for more information.
- </para>
-</section>
-
<section id='ref-classes-gzipnative'>
<title><filename>gzipnative.bbclass</filename></title>
@@ -3315,6 +3285,43 @@
</para>
</section>
+<section id='ref-classes-systemd-boot'>
+ <title><filename>systemd-boot.bbclass</filename></title>
+
+ <para>
+ The <filename>systemd-boot</filename> class provides functions specific
+ to the systemd-boot bootloader for building bootable images.
+ This is an internal class and is not intended to be used directly.
+ <note>
+ The <filename>systemd-boot</filename> class is a result from
+ merging the <filename>gummiboot</filename> class used in previous
+ Yocto Project releases with the <filename>systemd</filename>
+ project.
+ </note>
+ Set the
+ <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
+ variable to "systemd-boot" to use this class.
+ Doing so creates a standalone EFI bootloader that is not dependent
+ on systemd.
+ </para>
+
+ <para>
+ For information on more variables used and supported in this class,
+ see the
+ <link linkend='var-SYSTEMD_BOOT_CFG'><filename>SYSTEMD_BOOT_CFG</filename></link>,
+ <link linkend='var-SYSTEMD_BOOT_ENTRIES'><filename>SYSTEMD_BOOT_ENTRIES</filename></link>,
+ and
+ <link linkend='var-SYSTEMD_BOOT_TIMEOUT'><filename>SYSTEMD_BOOT_TIMEOUT</filename></link>
+ variables.
+ </para>
+
+ <para>
+ You can also see the
+ <ulink url='https://www.freedesktop.org/wiki/Software/systemd/'>Systemd documentation</ulink>
+ for more information.
+ </para>
+</section>
+
<section id='ref-classes-terminal'>
<title><filename>terminal.bbclass</filename></title>
diff --git a/documentation/ref-manual/ref-variables.xml b/documentation/ref-manual/ref-variables.xml
index d0c02d3..927e8f0 100644
--- a/documentation/ref-manual/ref-variables.xml
+++ b/documentation/ref-manual/ref-variables.xml
@@ -3532,13 +3532,13 @@
<link linkend='var-IMAGE_FSTYPES'><filename>IMAGE_FSTYPES</filename></link>),
the <filename>EFI_PROVIDER</filename> variable specifies
the EFI bootloader to use.
- The default is "grub-efi", but "gummiboot" can be used
+ The default is "grub-efi", but "systemd-boot" can be used
instead.
</para>
<para>
See the
- <link linkend='ref-classes-gummiboot'><filename>gummiboot</filename></link>
+ <link linkend='ref-classes-systemd-boot'><filename>systemd-boot</filename></link>
class for more information.
</para>
</glossdef>
@@ -4674,92 +4674,6 @@
</glossdef>
</glossentry>
- <glossentry id='var-GUMMIBOOT_CFG'><glossterm>GUMMIBOOT_CFG</glossterm>
- <info>
- GUMMIBOOT_CFG[doc] = "When EFI_PROVIDER is set to "gummiboot", the GUMMIBOOT_CFG variable
specifies the configuration file that should be used."
- </info>
- <glossdef>
- <para role="glossdeffirst">
-<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
- When
- <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
- is set to "gummiboot", the
- <filename>GUMMIBOOT_CFG</filename> variable specifies the
- configuration file that should be used.
- By default, the
- <link linkend='ref-classes-gummiboot'><filename>gummiboot</filename></link>
- class sets the <filename>GUMMIBOOT_CFG</filename> as
- follows:
- <literallayout class='monospaced'>
- GUMMIBOOT_CFG ?= "${<link linkend='var-S'>S</link>}/loader.conf"
- </literallayout>
- </para>
-
- <para>
- For information on Gummiboot, see the
- <ulink url='http://freedesktop.org/wiki/Software/gummiboot/'>Gummiboot
documentation</ulink>.
- </para>
- </glossdef>
- </glossentry>
-
- <glossentry id='var-GUMMIBOOT_ENTRIES'><glossterm>GUMMIBOOT_ENTRIES</glossterm>
- <info>
- GUMMIBOOT_ENTRIES[doc] = "When EFI_PROVIDER is set to "gummiboot", the GUMMIBOOT_ENTRIES
variable specifies a list of entry files (*.conf) to be installed containing one boot entry per file."
- </info>
- <glossdef>
- <para role="glossdeffirst">
-<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
- When
- <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
- is set to "gummiboot", the
- <filename>GUMMIBOOT_ENTRIES</filename> variable specifies
- a list of entry files
- (<filename>*.conf</filename>) to be installed
- containing one boot entry per file.
- By default, the
- <link linkend='ref-classes-gummiboot'><filename>gummiboot</filename></link>
- class sets the <filename>GUMMIBOOT_ENTRIES</filename> as
- follows:
- <literallayout class='monospaced'>
- GUMMIBOOT_ENTRIES ?= ""
- </literallayout>
- </para>
-
- <para>
- For information on Gummiboot, see the
- <ulink url='http://freedesktop.org/wiki/Software/gummiboot/'>Gummiboot
documentation</ulink>.
- </para>
- </glossdef>
- </glossentry>
-
- <glossentry id='var-GUMMIBOOT_TIMEOUT'><glossterm>GUMMIBOOT_TIMEOUT</glossterm>
- <info>
- GUMMIBOOT_TIMEOUT[doc] = "When EFI_PROVIDER is set to "gummiboot", the GUMMIBOOT_TIMEOUT
variable specifies the boot menu timeout in seconds."
- </info>
- <glossdef>
- <para role="glossdeffirst">
-<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
- When
- <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
- is set to "gummiboot", the
- <filename>GUMMIBOOT_TIMEOUT</filename> variable specifies
- the boot menu timeout in seconds.
- By default, the
- <link linkend='ref-classes-gummiboot'><filename>gummiboot</filename></link>
- class sets the <filename>GUMMIBOOT_TIMEOUT</filename> as
- follows:
- <literallayout class='monospaced'>
- GUMMIBOOT_TIMEOUT ?= "10"
- </literallayout>
- </para>
-
- <para>
- For information on Gummiboot, see the
- <ulink url='http://freedesktop.org/wiki/Software/gummiboot/'>Gummiboot
documentation</ulink>.
- </para>
- </glossdef>
- </glossentry>
-
</glossdiv>
<glossdiv id='var-glossary-h'><title>H</title>
@@ -12938,6 +12852,92 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
</glossdef>
</glossentry>
+ <glossentry id='var-SYSTEMD_BOOT_CFG'><glossterm>SYSTEMD_BOOT_CFG</glossterm>
+ <info>
+ SYSTEMD_BOOT_CFG[doc] = "When EFI_PROVIDER is set to "systemd-boot", the SYSTEMD_BOOT_CFG
variable specifies the configuration file that should be used."
+ </info>
+ <glossdef>
+ <para role="glossdeffirst">
+<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
+ When
+ <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
+ is set to "systemd-boot", the
+ <filename>SYSTEMD_BOOT_CFG</filename> variable specifies the
+ configuration file that should be used.
+ By default, the
+ <link linkend='ref-classes-systemd-boot'><filename>systemd-boot</filename></link>
+ class sets the <filename>SYSTEMD_BOOT_CFG</filename> as
+ follows:
+ <literallayout class='monospaced'>
+ SYSTEMD_BOOT_CFG ?= "${<link linkend='var-S'>S</link>}/loader.conf"
+ </literallayout>
+ </para>
+
+ <para>
+ For information on Systemd-boot, see the
+ <ulink url='http://freedesktop.org/wiki/Software/systemd-boot/'>Systemd-boot
documentation</ulink>.
+ </para>
+ </glossdef>
+ </glossentry>
+
+ <glossentry id='var-SYSTEMD_BOOT_ENTRIES'><glossterm>SYSTEMD_BOOT_ENTRIES</glossterm>
+ <info>
+ SYSTEMD_BOOT_ENTRIES[doc] = "When EFI_PROVIDER is set to "systemd-boot", the
SYSTEMD_BOOT_ENTRIES variable specifies a list of entry files (*.conf) to be installed containing one boot
entry per file."
+ </info>
+ <glossdef>
+ <para role="glossdeffirst">
+<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
+ When
+ <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
+ is set to "systemd-boot", the
+ <filename>SYSTEMD_BOOT_ENTRIES</filename> variable specifies
+ a list of entry files
+ (<filename>*.conf</filename>) to be installed
+ containing one boot entry per file.
+ By default, the
+ <link linkend='ref-classes-systemd-boot'><filename>systemd-boot</filename></link>
+ class sets the <filename>SYSTEMD_BOOT_ENTRIES</filename> as
+ follows:
+ <literallayout class='monospaced'>
+ SYSTEMD_BOOT_ENTRIES ?= ""
+ </literallayout>
+ </para>
+
+ <para>
+ For information on Systemd-boot, see the
+ <ulink url='http://freedesktop.org/wiki/Software/systemd-boot/'>Systemd-boot
documentation</ulink>.
+ </para>
+ </glossdef>
+ </glossentry>
+
+ <glossentry id='var-SYSTEMD_BOOT_TIMEOUT'><glossterm>SYSTEMD_BOOT_TIMEOUT</glossterm>
+ <info>
+ SYSTEMD_BOOT_TIMEOUT[doc] = "When EFI_PROVIDER is set to "systemd-boot", the
SYSTEMD_BOOT_TIMEOUT variable specifies the boot menu timeout in seconds."
+ </info>
+ <glossdef>
+ <para role="glossdeffirst">
+<!-- <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
+ When
+ <link linkend='var-EFI_PROVIDER'><filename>EFI_PROVIDER</filename></link>
+ is set to "systemd-boot", the
+ <filename>SYSTEMD_BOOT_TIMEOUT</filename> variable specifies
+ the boot menu timeout in seconds.
+ By default, the
+ <link linkend='ref-classes-systemd-boot'><filename>systemd-boot</filename></link>
+ class sets the <filename>SYSTEMD_BOOT_TIMEOUT</filename> as
+ follows:
+ <literallayout class='monospaced'>
+ SYSTEMD_BOOT_TIMEOUT ?= "10"
+ </literallayout>
+ </para>
+
+ <para>
+ For information on Systemd-boot, see the
+ <ulink url='http://freedesktop.org/wiki/Software/systemd-boot/'>Systemd-boot
documentation</ulink>.
+ </para>
+ </glossdef>
+ </glossentry>
+
<glossentry id='var-SYSTEMD_PACKAGES'><glossterm>SYSTEMD_PACKAGES</glossterm>
<info>
SYSTEMD_PACKAGES[doc] = "For recipes that inherit the systemd class, this variable locates
the systemd unit files when they are not found in the main recipe's package."
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
