[glib/jjardon/gettext: 1/2] po/Makefile.in.in: Include in tree
- From: Javier Jardón Cabezas <jjardon src gnome org>
- To: commits-list gnome org
- Cc:
- Subject: [glib/jjardon/gettext: 1/2] po/Makefile.in.in: Include in tree
- Date: Sun, 10 Jan 2016 18:47:10 +0000 (UTC)
commit 295cdad37267b549c33920d0fc93cb30f274dfc2
Author: Javier Jardón <jjardon gnome org>
Date: Sun Jan 10 17:01:11 2016 +0000
po/Makefile.in.in: Include in tree
ABOUT-NLS | 1410 ++++++++++++++++++++++++++++++++++++++++++++++++
autogen.sh | 2 +-
m4macros/Makefile.am | 2 +
m4macros/gettext.m4 | 405 ++++++++++++++
m4macros/iconv.m4 | 271 ++++++++++
m4macros/lib-ld.m4 | 119 ++++
m4macros/lib-link.m4 | 777 ++++++++++++++++++++++++++
m4macros/lib-prefix.m4 | 224 ++++++++
m4macros/nls.m4 | 32 ++
m4macros/po.m4 | 453 ++++++++++++++++
m4macros/progtest.m4 | 91 ++++
po/Makefile.in.in | 475 ++++++++++++++++
po/Makevars.template | 78 +++
po/Rules-quot | 58 ++
po/boldquot.sed | 10 +
po/en boldquot header | 25 +
po/en quot header | 22 +
po/insert-header.sin | 23 +
po/quot.sed | 6 +
po/remove-potcdate.sin | 19 +
20 files changed, 4501 insertions(+), 1 deletions(-)
---
diff --git a/ABOUT-NLS b/ABOUT-NLS
new file mode 100644
index 0000000..ac4111a
--- /dev/null
+++ b/ABOUT-NLS
@@ -0,0 +1,1410 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. Installers may use special
+options at configuration time for changing the default behaviour. The
+command:
+
+ ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it. If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to `sv-request li org', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator translationproject org' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of June
+2010. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am an ar as ast az be bg bn bn_IN bs ca crh cs
+ +---------------------------------------------------+
+ a2ps | [] [] [] |
+ aegis | |
+ anubis | |
+ aspell | [] [] [] |
+ bash | [] [] [] |
+ bfd | |
+ binutils | [] |
+ bison | |
+ bison-runtime | [] |
+ buzztrax | [] |
+ ccd2cue | |
+ ccide | |
+ cflow | |
+ clisp | |
+ coreutils | [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] |
+ cryptsetup | [] |
+ datamash | |
+ denemo | [] [] |
+ dfarc | [] |
+ dialog | [] [] [] |
+ dico | |
+ diffutils | [] |
+ dink | [] |
+ direvent | |
+ doodle | [] |
+ dos2unix | |
+ dos2unix-man | |
+ e2fsprogs | [] [] |
+ enscript | [] |
+ exif | [] |
+ fetchmail | [] [] |
+ findutils | [] |
+ flex | [] |
+ freedink | [] [] |
+ fusionforge | |
+ gas | |
+ gawk | [] |
+ gcal | [] |
+ gcc | |
+ gdbm | |
+ gettext-examples | [] [] [] [] [] |
+ gettext-runtime | [] [] [] |
+ gettext-tools | [] [] |
+ gip | [] [] |
+ gjay | |
+ glunarclock | [] [] [] |
+ gnubiff | [] |
+ gnubik | [] |
+ gnucash | () () [] |
+ gnuchess | |
+ gnulib | [] |
+ gnunet | |
+ gnunet-gtk | |
+ gold | |
+ gphoto2 | [] |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | [] [] |
+ grub | [] |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] [] [] |
+ gst-plugins-good | [] [] [] |
+ gst-plugins-ugly | [] [] [] |
+ gstreamer | [] [] [] [] |
+ gtick | [] |
+ gtkam | [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] |
+ guix | |
+ guix-packages | |
+ gutenprint | [] |
+ hello | [] |
+ help2man | |
+ help2man-texi | |
+ hylafax | |
+ idutils | |
+ iso_15924 | [] |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] |
+ iso_639 | [] [] [] [] [] [] [] [] [] |
+ iso_639_3 | [] [] |
+ iso_639_5 | |
+ jwhois | |
+ kbd | [] |
+ klavaro | [] [] [] [] [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] [] [] |
+ libc | [] [] [] |
+ libexif | () |
+ libextractor | |
+ libgnutls | [] |
+ libgpg-error | [] |
+ libgphoto2 | [] |
+ libgphoto2_port | [] |
+ libgsasl | |
+ libiconv | [] [] |
+ libidn | [] |
+ liferea | [] [] [] [] |
+ lilypond | [] [] |
+ lordsawar | [] |
+ lprng | |
+ lynx | [] [] |
+ m4 | [] |
+ mailfromd | |
+ mailutils | |
+ make | [] |
+ man-db | [] [] |
+ man-db-manpages | |
+ midi-instruments | [] [] [] |
+ minicom | [] |
+ mkisofs | [] |
+ myserver | [] |
+ nano | [] [] [] |
+ opcodes | |
+ parted | [] |
+ pies | |
+ popt | [] |
+ procps-ng | |
+ procps-ng-man | |
+ psmisc | [] |
+ pspp | [] |
+ pushover | [] |
+ pwdutils | |
+ pyspread | |
+ radius | [] |
+ recode | [] [] [] |
+ recutils | |
+ rpm | |
+ rush | |
+ sarg | |
+ sed | [] [] [] |
+ sharutils | [] |
+ shishi | |
+ skribilo | |
+ solfege | [] |
+ solfege-manual | |
+ spotmachine | |
+ sudo | [] [] |
+ sudoers | [] [] |
+ sysstat | [] |
+ tar | [] [] [] |
+ texinfo | [] [] |
+ texinfo_document | [] |
+ tigervnc | [] |
+ tin | |
+ tin-man | |
+ tracgoogleappsa... | |
+ trader | |
+ util-linux | [] |
+ ve | |
+ vice | |
+ vmm | |
+ vorbis-tools | [] |
+ wastesedge | |
+ wcd | |
+ wcd-man | |
+ wdiff | [] [] |
+ wget | [] [] |
+ wyslij-po | |
+ xboard | |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +---------------------------------------------------+
+ af am an ar as ast az be bg bn bn_IN bs ca crh cs
+ 4 0 2 4 3 11 0 8 24 3 3 1 55 4 76
+
+ da de el en en_GB en_ZA eo es et eu fa fi fr
+ +--------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] [] [] |
+ aegis | [] [] [] [] |
+ anubis | [] [] [] [] [] |
+ aspell | [] [] [] [] [] [] [] |
+ bash | [] [] [] [] [] |
+ bfd | [] [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] [] [] [] |
+ buzztrax | [] [] [] [] |
+ ccd2cue | [] [] [] |
+ ccide | [] [] [] [] [] [] |
+ cflow | [] [] [] [] [] |
+ clisp | [] [] [] [] [] |
+ coreutils | [] [] [] [] [] |
+ cpio | [] [] [] [] [] |
+ cppi | [] [] [] [] [] |
+ cpplib | [] [] [] [] [] [] |
+ cryptsetup | [] [] [] [] [] |
+ datamash | [] [] [] [] |
+ denemo | |
+ dfarc | [] [] [] [] [] [] |
+ dialog | [] [] [] [] [] [] [] [] [] |
+ dico | [] [] [] [] |
+ diffutils | [] [] [] [] [] [] |
+ dink | [] [] [] [] [] [] |
+ direvent | [] [] [] [] |
+ doodle | [] [] [] [] |
+ dos2unix | [] [] [] [] [] |
+ dos2unix-man | [] [] [] |
+ e2fsprogs | [] [] [] [] [] |
+ enscript | [] [] [] [] [] [] |
+ exif | [] [] [] [] [] [] |
+ fetchmail | [] () [] [] [] [] [] |
+ findutils | [] [] [] [] [] [] [] [] |
+ flex | [] [] [] [] [] [] |
+ freedink | [] [] [] [] [] [] [] [] |
+ fusionforge | [] [] [] |
+ gas | [] [] [] |
+ gawk | [] [] [] [] [] |
+ gcal | [] [] [] [] |
+ gcc | [] [] |
+ gdbm | [] [] [] [] [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] |
+ gip | [] [] [] [] [] [] [] |
+ gjay | [] [] [] [] |
+ glunarclock | [] [] [] [] [] |
+ gnubiff | () [] [] () |
+ gnubik | [] [] [] [] [] |
+ gnucash | [] () () () () () () |
+ gnuchess | [] [] [] [] |
+ gnulib | [] [] [] [] [] [] [] |
+ gnunet | [] |
+ gnunet-gtk | [] |
+ gold | [] [] [] |
+ gphoto2 | [] () [] [] |
+ gprof | [] [] [] [] [] [] |
+ gpsdrive | [] [] [] [] |
+ gramadoir | [] [] [] [] [] |
+ grep | [] [] [] [] [] [] [] |
+ grub | [] [] [] [] [] |
+ gsasl | [] [] [] [] [] |
+ gss | [] [] [] [] [] |
+ gst-plugins-bad | [] [] |
+ gst-plugins-base | [] [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] [] [] |
+ gtick | [] () [] [] [] |
+ gtkam | [] () [] [] [] [] |
+ gtkorphan | [] [] [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] |
+ guix | [] [] [] |
+ guix-packages | |
+ gutenprint | [] [] [] [] |
+ hello | [] [] [] [] [] [] [] [] |
+ help2man | [] [] [] [] [] [] [] |
+ help2man-texi | [] [] [] |
+ hylafax | [] [] |
+ idutils | [] [] [] [] [] |
+ iso_15924 | [] () [] [] () [] () |
+ iso_3166 | [] () [] [] [] [] () [] () |
+ iso_3166_2 | [] () () () |
+ iso_4217 | [] () [] [] [] () [] () |
+ iso_639 | [] () [] [] () [] () |
+ iso_639_3 | () () () |
+ iso_639_5 | () () () |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] [] [] [] [] |
+ klavaro | [] [] [] [] [] [] [] |
+ latrine | [] () [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] [] () [] [] |
+ libextractor | [] |
+ libgnutls | [] [] [] [] |
+ libgpg-error | [] [] [] |
+ libgphoto2 | [] () [] |
+ libgphoto2_port | [] () [] [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] [] [] |
+ libidn | [] [] [] [] [] |
+ liferea | [] () [] [] [] [] [] |
+ lilypond | [] [] [] [] [] [] |
+ lordsawar | [] [] |
+ lprng | |
+ lynx | [] [] [] [] [] [] |
+ m4 | [] [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] [] [] [] |
+ make | [] [] [] [] [] |
+ man-db | [] [] [] [] |
+ man-db-manpages | [] [] |
+ midi-instruments | [] [] [] [] [] [] [] [] [] |
+ minicom | [] [] [] [] [] |
+ mkisofs | [] [] [] |
+ myserver | [] [] [] [] |
+ nano | [] [] [] [] [] [] [] |
+ opcodes | [] [] [] [] [] |
+ parted | [] [] [] |
+ pies | [] |
+ popt | [] [] [] [] [] [] |
+ procps-ng | [] [] |
+ procps-ng-man | [] [] |
+ psmisc | [] [] [] [] [] [] [] |
+ pspp | [] [] [] |
+ pushover | () [] [] [] |
+ pwdutils | [] [] [] |
+ pyspread | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] |
+ recutils | [] [] [] [] |
+ rpm | [] [] [] [] [] |
+ rush | [] [] [] |
+ sarg | [] [] |
+ sed | [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] [] [] |
+ skribilo | [] [] |
+ solfege | [] [] [] [] [] [] [] [] |
+ solfege-manual | [] [] [] [] [] |
+ spotmachine | [] [] [] [] |
+ sudo | [] [] [] [] [] [] |
+ sudoers | [] [] [] [] [] [] |
+ sysstat | [] [] [] [] [] [] |
+ tar | [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] [] |
+ texinfo_document | [] [] [] [] |
+ tigervnc | [] [] [] [] [] [] |
+ tin | [] [] [] [] |
+ tin-man | [] |
+ tracgoogleappsa... | [] [] [] [] [] |
+ trader | [] [] [] [] [] [] |
+ util-linux | [] [] [] [] |
+ ve | [] [] [] [] [] |
+ vice | () () () |
+ vmm | [] [] |
+ vorbis-tools | [] [] [] [] |
+ wastesedge | [] () |
+ wcd | [] [] [] [] |
+ wcd-man | [] |
+ wdiff | [] [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] |
+ wyslij-po | [] [] [] [] |
+ xboard | [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] [] [] |
+ +--------------------------------------------------+
+ da de el en en_GB en_ZA eo es et eu fa fi fr
+ 123 134 32 1 6 0 97 97 23 14 4 106 139
+
+ ga gd gl gu he hi hr hu hy ia id is it ja ka kk
+ +-------------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | [] |
+ anubis | [] [] [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] [] [] |
+ bfd | [] [] |
+ binutils | [] [] [] |
+ bison | [] |
+ bison-runtime | [] [] [] [] [] [] [] [] |
+ buzztrax | |
+ ccd2cue | [] |
+ ccide | [] [] |
+ cflow | [] [] [] |
+ clisp | |
+ coreutils | [] [] [] |
+ cpio | [] [] [] [] [] [] |
+ cppi | [] [] [] [] [] |
+ cpplib | [] [] |
+ cryptsetup | [] |
+ datamash | |
+ denemo | [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] |
+ dink | [] |
+ direvent | [] |
+ doodle | [] [] |
+ dos2unix | [] [] |
+ dos2unix-man | |
+ e2fsprogs | [] |
+ enscript | [] [] [] |
+ exif | [] [] [] [] [] [] |
+ fetchmail | [] [] [] |
+ findutils | [] [] [] [] [] [] [] |
+ flex | [] |
+ freedink | [] [] [] [] |
+ fusionforge | |
+ gas | [] |
+ gawk | [] () [] |
+ gcal | |
+ gcc | |
+ gdbm | |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gip | [] [] [] [] [] [] |
+ gjay | [] |
+ glunarclock | [] [] [] [] [] [] |
+ gnubiff | [] [] () |
+ gnubik | [] [] [] |
+ gnucash | () () () () () [] |
+ gnuchess | |
+ gnulib | [] [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gold | [] [] |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | [] [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] [] [] [] [] [] [] |
+ grub | [] [] [] |
+ gsasl | [] [] [] [] [] |
+ gss | [] [] [] [] [] |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] [] [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] [] |
+ guix | [] |
+ guix-packages | |
+ gutenprint | [] [] [] |
+ hello | [] [] [] [] [] |
+ help2man | [] [] [] |
+ help2man-texi | |
+ hylafax | [] |
+ idutils | [] [] |
+ iso_15924 | [] [] [] [] [] [] |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] [] |
+ iso_4217 | [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] [] [] |
+ iso_639_3 | [] [] |
+ iso_639_5 | |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ klavaro | [] [] [] [] |
+ latrine | [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] [] () |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | |
+ libgnutls | [] |
+ libgpg-error | [] [] [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | [] [] [] [] |
+ libiconv | [] [] [] [] [] [] [] |
+ libidn | [] [] [] [] |
+ liferea | [] [] [] [] [] |
+ lilypond | [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | |
+ mailutils | |
+ make | [] [] [] [] |
+ man-db | [] [] |
+ man-db-manpages | [] [] |
+ midi-instruments | [] [] [] [] [] [] [] [] [] |
+ minicom | [] [] [] |
+ mkisofs | [] [] |
+ myserver | [] |
+ nano | [] [] [] [] [] |
+ opcodes | [] [] [] |
+ parted | [] [] [] [] |
+ pies | |
+ popt | [] [] [] [] [] [] [] [] [] [] |
+ procps-ng | |
+ procps-ng-man | |
+ psmisc | [] [] [] [] |
+ pspp | [] [] |
+ pushover | [] |
+ pwdutils | [] |
+ pyspread | |
+ radius | [] |
+ recode | [] [] [] [] [] [] [] |
+ recutils | |
+ rpm | [] |
+ rush | [] |
+ sarg | |
+ sed | [] [] [] [] [] [] [] |
+ sharutils | |
+ shishi | |
+ skribilo | [] |
+ solfege | [] [] |
+ solfege-manual | |
+ spotmachine | |
+ sudo | [] [] [] [] |
+ sudoers | [] [] [] |
+ sysstat | [] [] [] |
+ tar | [] [] [] [] [] [] |
+ texinfo | [] [] [] |
+ texinfo_document | [] [] |
+ tigervnc | |
+ tin | |
+ tin-man | |
+ tracgoogleappsa... | [] [] [] [] |
+ trader | [] [] |
+ util-linux | [] |
+ ve | [] |
+ vice | () () |
+ vmm | |
+ vorbis-tools | [] [] |
+ wastesedge | () |
+ wcd | |
+ wcd-man | |
+ wdiff | [] [] [] |
+ wget | [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xboard | |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] |
+ +-------------------------------------------------+
+ ga gd gl gu he hi hr hu hy ia id is it ja ka kk
+ 36 2 49 4 8 2 54 75 2 6 84 11 89 60 0 3
+
+ kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl
+ +--------------------------------------------------+
+ a2ps | [] [] |
+ aegis | [] |
+ anubis | [] [] [] |
+ aspell | [] [] |
+ bash | [] [] |
+ bfd | |
+ binutils | |
+ bison | [] |
+ bison-runtime | [] [] [] [] [] [] |
+ buzztrax | |
+ ccd2cue | |
+ ccide | [] [] |
+ cflow | [] |
+ clisp | [] |
+ coreutils | [] [] |
+ cpio | [] |
+ cppi | |
+ cpplib | [] |
+ cryptsetup | [] |
+ datamash | [] [] |
+ denemo | |
+ dfarc | [] [] |
+ dialog | [] [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] |
+ dink | [] |
+ direvent | [] |
+ doodle | [] |
+ dos2unix | [] [] |
+ dos2unix-man | [] |
+ e2fsprogs | [] |
+ enscript | [] |
+ exif | [] [] |
+ fetchmail | [] |
+ findutils | [] [] |
+ flex | [] |
+ freedink | [] [] |
+ fusionforge | |
+ gas | |
+ gawk | [] |
+ gcal | |
+ gcc | |
+ gdbm | |
+ gettext-examples | [] [] [] [] [] [] |
+ gettext-runtime | [] [] |
+ gettext-tools | [] |
+ gip | [] [] [] |
+ gjay | |
+ glunarclock | [] [] |
+ gnubiff | [] |
+ gnubik | [] [] |
+ gnucash | () () () () () () () [] |
+ gnuchess | [] [] |
+ gnulib | [] |
+ gnunet | |
+ gnunet-gtk | |
+ gold | |
+ gphoto2 | [] |
+ gprof | [] [] |
+ gpsdrive | [] |
+ gramadoir | [] |
+ grep | [] [] |
+ grub | [] [] [] |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] [] [] |
+ gst-plugins-good | [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] |
+ gstreamer | [] [] |
+ gtick | [] |
+ gtkam | [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ guix | |
+ guix-packages | |
+ gutenprint | [] |
+ hello | [] [] [] |
+ help2man | [] |
+ help2man-texi | |
+ hylafax | [] |
+ idutils | [] |
+ iso_15924 | () [] [] |
+ iso_3166 | [] [] [] () [] [] [] [] [] [] |
+ iso_3166_2 | () [] |
+ iso_4217 | () [] [] [] |
+ iso_639 | [] [] () [] [] [] [] |
+ iso_639_3 | [] () [] |
+ iso_639_5 | () |
+ jwhois | [] [] |
+ kbd | [] |
+ klavaro | [] [] |
+ latrine | |
+ ld | |
+ leafpad | [] [] [] [] [] |
+ libc | [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgnutls | [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] |
+ libgphoto2_port | [] |
+ libgsasl | [] |
+ libiconv | [] [] |
+ libidn | [] |
+ liferea | [] [] [] |
+ lilypond | |
+ lordsawar | |
+ lprng | |
+ lynx | [] |
+ m4 | [] |
+ mailfromd | |
+ mailutils | |
+ make | [] [] |
+ man-db | [] |
+ man-db-manpages | [] |
+ midi-instruments | [] [] [] [] [] [] [] |
+ minicom | [] |
+ mkisofs | [] |
+ myserver | |
+ nano | [] [] [] |
+ opcodes | [] |
+ parted | [] |
+ pies | |
+ popt | [] [] [] [] [] |
+ procps-ng | |
+ procps-ng-man | |
+ psmisc | [] |
+ pspp | [] [] |
+ pushover | |
+ pwdutils | [] |
+ pyspread | |
+ radius | [] |
+ recode | [] [] |
+ recutils | [] |
+ rpm | [] |
+ rush | [] |
+ sarg | |
+ sed | [] [] |
+ sharutils | [] |
+ shishi | |
+ skribilo | |
+ solfege | [] [] |
+ solfege-manual | [] |
+ spotmachine | [] |
+ sudo | [] [] |
+ sudoers | [] [] |
+ sysstat | [] [] |
+ tar | [] [] [] |
+ texinfo | [] |
+ texinfo_document | [] |
+ tigervnc | [] |
+ tin | |
+ tin-man | |
+ tracgoogleappsa... | [] [] [] |
+ trader | [] |
+ util-linux | [] |
+ ve | [] |
+ vice | [] |
+ vmm | [] |
+ vorbis-tools | [] |
+ wastesedge | [] |
+ wcd | [] |
+ wcd-man | [] |
+ wdiff | [] |
+ wget | [] [] |
+ wyslij-po | [] |
+ xboard | [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +--------------------------------------------------+
+ kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl
+ 5 11 4 6 0 13 24 3 3 3 4 12 2 40 1 126
+
+ nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ +--------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] |
+ aegis | [] [] |
+ anubis | [] [] [] |
+ aspell | [] [] [] [] [] [] [] |
+ bash | [] [] [] [] [] |
+ bfd | [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] [] [] [] [] [] |
+ buzztrax | |
+ ccd2cue | [] |
+ ccide | [] [] [] |
+ cflow | [] [] |
+ clisp | [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ cppi | [] [] [] |
+ cpplib | [] [] [] |
+ cryptsetup | [] [] |
+ datamash | [] [] |
+ denemo | |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] [] [] |
+ dico | [] |
+ diffutils | [] [] |
+ dink | |
+ direvent | [] [] |
+ doodle | [] [] |
+ dos2unix | [] [] [] [] |
+ dos2unix-man | [] [] |
+ e2fsprogs | [] |
+ enscript | [] [] [] [] [] [] |
+ exif | [] [] [] [] [] [] |
+ fetchmail | [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ freedink | [] [] [] [] [] |
+ fusionforge | |
+ gas | |
+ gawk | [] |
+ gcal | |
+ gcc | |
+ gdbm | [] [] [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] [] |
+ gip | [] [] [] [] [] |
+ gjay | [] |
+ glunarclock | [] [] [] [] [] [] |
+ gnubiff | [] |
+ gnubik | [] [] [] [] |
+ gnucash | () () () () [] |
+ gnuchess | [] [] |
+ gnulib | [] [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gold | |
+ gphoto2 | [] [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] [] [] |
+ grub | [] [] [] [] [] |
+ gsasl | [] [] [] |
+ gss | [] [] [] [] |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] [] [] |
+ gtick | [] [] [] [] [] |
+ gtkam | [] [] [] [] [] [] |
+ gtkorphan | [] [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] |
+ guix | |
+ guix-packages | |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] |
+ help2man | [] [] [] [] |
+ help2man-texi | [] |
+ hylafax | |
+ idutils | [] [] [] |
+ iso_15924 | [] () [] [] [] [] |
+ iso_3166 | [] [] [] [] () [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] () [] |
+ iso_4217 | [] [] () [] [] [] [] [] |
+ iso_639 | [] [] [] () [] [] [] [] [] [] |
+ iso_639_3 | [] () |
+ iso_639_5 | () [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] |
+ klavaro | [] [] [] [] [] |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] [] [] [] [] [] [] [] |
+ libc | [] [] [] |
+ libexif | [] () [] |
+ libextractor | [] |
+ libgnutls | [] |
+ libgpg-error | [] [] [] |
+ libgphoto2 | [] |
+ libgphoto2_port | [] [] [] [] [] |
+ libgsasl | [] [] [] [] |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] [] |
+ liferea | [] [] [] [] () [] [] |
+ lilypond | |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] |
+ make | [] [] [] |
+ man-db | [] [] [] |
+ man-db-manpages | [] [] [] |
+ midi-instruments | [] [] [] [] [] [] [] [] |
+ minicom | [] [] [] [] |
+ mkisofs | [] [] [] |
+ myserver | [] [] |
+ nano | [] [] [] [] [] [] |
+ opcodes | |
+ parted | [] [] [] [] [] [] |
+ pies | [] |
+ popt | [] [] [] [] [] [] |
+ procps-ng | [] |
+ procps-ng-man | [] |
+ psmisc | [] [] [] [] |
+ pspp | [] [] |
+ pushover | |
+ pwdutils | [] |
+ pyspread | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ recutils | [] |
+ rpm | [] |
+ rush | [] [] [] |
+ sarg | [] [] |
+ sed | [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] |
+ shishi | [] [] |
+ skribilo | |
+ solfege | [] [] [] |
+ solfege-manual | [] [] |
+ spotmachine | [] [] |
+ sudo | [] [] [] [] [] |
+ sudoers | [] [] [] [] |
+ sysstat | [] [] [] [] [] |
+ tar | [] [] [] [] [] |
+ texinfo | [] [] [] |
+ texinfo_document | [] [] |
+ tigervnc | |
+ tin | [] |
+ tin-man | |
+ tracgoogleappsa... | [] [] [] [] |
+ trader | [] |
+ util-linux | [] [] |
+ ve | [] [] [] |
+ vice | |
+ vmm | |
+ vorbis-tools | [] [] [] |
+ wastesedge | |
+ wcd | |
+ wcd-man | |
+ wdiff | [] [] [] [] [] |
+ wget | [] [] [] [] [] |
+ wyslij-po | [] [] [] [] |
+ xboard | [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] |
+ +--------------------------------------------------+
+ nn or os pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ 7 3 1 6 117 1 12 84 33 82 3 37 45 7 98
+
+ sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] |
+ aegis | [] |
+ anubis | [] [] [] [] |
+ aspell | [] [] [] [] |
+ bash | [] [] [] [] [] |
+ bfd | [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] |
+ bison-runtime | [] [] [] [] [] [] |
+ buzztrax | [] [] [] |
+ ccd2cue | [] [] |
+ ccide | [] [] [] |
+ cflow | [] [] [] [] |
+ clisp | |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] [] [] |
+ cppi | [] [] [] |
+ cpplib | [] [] [] [] [] |
+ cryptsetup | [] [] [] |
+ datamash | [] [] [] |
+ denemo | |
+ dfarc | [] |
+ dialog | [] [] [] [] [] [] |
+ dico | [] |
+ diffutils | [] [] [] [] [] |
+ dink | |
+ direvent | [] [] |
+ doodle | [] [] |
+ dos2unix | [] [] [] |
+ dos2unix-man | [] [] |
+ e2fsprogs | [] [] [] [] |
+ enscript | [] [] [] [] |
+ exif | [] [] [] [] [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] |
+ freedink | [] [] |
+ fusionforge | |
+ gas | [] |
+ gawk | [] [] |
+ gcal | [] [] |
+ gcc | [] [] |
+ gdbm | [] [] |
+ gettext-examples | [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] |
+ gip | [] [] [] [] |
+ gjay | [] [] |
+ glunarclock | [] [] [] [] |
+ gnubiff | [] [] |
+ gnubik | [] [] [] |
+ gnucash | () () () () [] |
+ gnuchess | [] [] |
+ gnulib | [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gold | [] [] |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] [] [] [] [] |
+ grub | [] [] [] [] |
+ gsasl | [] [] [] [] |
+ gss | [] [] [] |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] |
+ guix | [] |
+ guix-packages | |
+ gutenprint | [] [] [] |
+ hello | [] [] [] [] [] |
+ help2man | [] [] [] |
+ help2man-texi | [] |
+ hylafax | [] |
+ idutils | [] [] [] |
+ iso_15924 | [] () [] [] () [] |
+ iso_3166 | [] [] () [] [] () [] [] [] |
+ iso_3166_2 | () [] [] () [] |
+ iso_4217 | [] () [] [] () [] [] |
+ iso_639 | [] [] [] () [] [] () [] [] [] |
+ iso_639_3 | [] () [] [] () |
+ iso_639_5 | () [] () |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ klavaro | [] [] [] [] [] [] |
+ latrine | [] [] |
+ ld | [] [] [] [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] () |
+ libextractor | [] [] |
+ libgnutls | [] [] [] [] |
+ libgpg-error | [] [] [] [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] [] [] |
+ libgsasl | [] [] [] [] |
+ libiconv | [] [] [] [] [] |
+ libidn | () [] [] [] |
+ liferea | [] [] [] [] [] |
+ lilypond | [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] |
+ mailfromd | [] [] |
+ mailutils | [] |
+ make | [] [] [] |
+ man-db | [] [] |
+ man-db-manpages | [] |
+ midi-instruments | [] [] [] [] [] [] |
+ minicom | [] [] |
+ mkisofs | [] [] [] |
+ myserver | [] |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] [] |
+ pies | [] [] |
+ popt | [] [] [] [] [] [] [] |
+ procps-ng | [] [] |
+ procps-ng-man | [] |
+ psmisc | [] [] [] |
+ pspp | [] [] [] |
+ pushover | [] |
+ pwdutils | [] [] |
+ pyspread | [] |
+ radius | [] [] |
+ recode | [] [] [] [] |
+ recutils | [] [] [] |
+ rpm | [] [] [] [] |
+ rush | [] [] |
+ sarg | |
+ sed | [] [] [] [] [] |
+ sharutils | [] [] [] |
+ shishi | [] |
+ skribilo | |
+ solfege | [] [] [] |
+ solfege-manual | [] |
+ spotmachine | [] [] |
+ sudo | [] [] [] [] |
+ sudoers | [] [] [] |
+ sysstat | [] [] [] [] |
+ tar | [] [] [] [] [] |
+ texinfo | [] [] [] |
+ texinfo_document | [] |
+ tigervnc | [] [] |
+ tin | [] |
+ tin-man | |
+ tracgoogleappsa... | [] [] [] [] [] |
+ trader | [] |
+ util-linux | [] [] [] |
+ ve | [] [] [] [] |
+ vice | () () |
+ vmm | |
+ vorbis-tools | [] [] |
+ wastesedge | |
+ wcd | [] [] |
+ wcd-man | [] |
+ wdiff | [] [] [] |
+ wget | [] [] [] |
+ wyslij-po | [] [] |
+ xboard | [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] |
+ +---------------------------------------------------+
+ sv sw ta te tg th tr uk ur vi wa wo zh_CN zh_HK
+ 87 1 4 3 0 14 52 114 1 130 7 1 88 7
+
+ zh_TW
+ +-------+
+ a2ps | | 30
+ aegis | | 9
+ anubis | | 19
+ aspell | | 28
+ bash | [] | 25
+ bfd | | 9
+ binutils | | 12
+ bison | [] | 18
+ bison-runtime | [] | 38
+ buzztrax | | 8
+ ccd2cue | | 7
+ ccide | | 16
+ cflow | | 15
+ clisp | | 10
+ coreutils | | 20
+ cpio | [] | 21
+ cppi | | 16
+ cpplib | [] | 19
+ cryptsetup | | 13
+ datamash | | 11
+ denemo | | 3
+ dfarc | | 16
+ dialog | [] | 42
+ dico | | 6
+ diffutils | | 21
+ dink | | 9
+ direvent | | 10
+ doodle | | 12
+ dos2unix | [] | 17
+ dos2unix-man | | 8
+ e2fsprogs | | 14
+ enscript | | 21
+ exif | | 26
+ fetchmail | | 19
+ findutils | | 28
+ flex | [] | 18
+ freedink | | 23
+ fusionforge | | 3
+ gas | | 5
+ gawk | | 12
+ gcal | | 7
+ gcc | | 4
+ gdbm | | 10
+ gettext-examples | [] | 40
+ gettext-runtime | [] | 34
+ gettext-tools | [] | 24
+ gip | [] | 28
+ gjay | | 8
+ glunarclock | [] | 27
+ gnubiff | | 9
+ gnubik | | 18
+ gnucash | () | 6
+ gnuchess | | 10
+ gnulib | | 23
+ gnunet | | 1
+ gnunet-gtk | | 1
+ gold | | 7
+ gphoto2 | [] | 19
+ gprof | | 21
+ gpsdrive | | 13
+ gramadoir | | 14
+ grep | [] | 30
+ grub | | 21
+ gsasl | [] | 19
+ gss | | 17
+ gst-plugins-bad | | 13
+ gst-plugins-base | | 27
+ gst-plugins-good | | 32
+ gst-plugins-ugly | | 34
+ gstreamer | [] | 31
+ gtick | | 19
+ gtkam | | 24
+ gtkorphan | | 20
+ gtkspell | [] | 48
+ guix | | 5
+ guix-packages | | 0
+ gutenprint | | 13
+ hello | [] | 29
+ help2man | | 18
+ help2man-texi | | 5
+ hylafax | | 5
+ idutils | | 14
+ iso_15924 | [] | 23
+ iso_3166 | [] | 58
+ iso_3166_2 | | 9
+ iso_4217 | [] | 28
+ iso_639 | [] | 46
+ iso_639_3 | | 10
+ iso_639_5 | | 2
+ jwhois | [] | 20
+ kbd | | 16
+ klavaro | | 29
+ latrine | | 7
+ ld | [] | 15
+ leafpad | [] | 40
+ libc | [] | 24
+ libexif | | 9
+ libextractor | | 5
+ libgnutls | | 13
+ libgpg-error | | 15
+ libgphoto2 | | 9
+ libgphoto2_port | [] | 19
+ libgsasl | | 18
+ libiconv | [] | 29
+ libidn | | 17
+ liferea | | 29
+ lilypond | | 10
+ lordsawar | | 3
+ lprng | | 3
+ lynx | | 19
+ m4 | [] | 22
+ mailfromd | | 4
+ mailutils | | 6
+ make | | 18
+ man-db | | 14
+ man-db-manpages | | 9
+ midi-instruments | [] | 43
+ minicom | [] | 17
+ mkisofs | | 13
+ myserver | | 9
+ nano | [] | 29
+ opcodes | | 11
+ parted | [] | 21
+ pies | | 4
+ popt | [] | 36
+ procps-ng | | 5
+ procps-ng-man | | 4
+ psmisc | [] | 21
+ pspp | | 13
+ pushover | | 6
+ pwdutils | | 8
+ pyspread | | 5
+ radius | | 9
+ recode | | 31
+ recutils | | 9
+ rpm | [] | 13
+ rush | | 10
+ sarg | | 4
+ sed | [] | 34
+ sharutils | | 12
+ shishi | | 6
+ skribilo | | 3
+ solfege | | 19
+ solfege-manual | | 9
+ spotmachine | | 9
+ sudo | | 23
+ sudoers | | 20
+ sysstat | | 21
+ tar | [] | 30
+ texinfo | | 17
+ texinfo_document | | 11
+ tigervnc | | 10
+ tin | [] | 7
+ tin-man | | 1
+ tracgoogleappsa... | [] | 22
+ trader | | 11
+ util-linux | | 12
+ ve | | 14
+ vice | | 1
+ vmm | | 3
+ vorbis-tools | | 13
+ wastesedge | | 2
+ wcd | | 7
+ wcd-man | | 3
+ wdiff | [] | 22
+ wget | | 22
+ wyslij-po | | 14
+ xboard | | 8
+ xdg-user-dirs | [] | 68
+ xkeyboard-config | [] | 27
+ +-------+
+ 90 teams zh_TW
+ 170 domains 44 2805
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`coordinator translationproject org' to make the `.pot' files available
+to the translation teams.
+
diff --git a/autogen.sh b/autogen.sh
index 4bbc00d..b12ebd3 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -30,7 +30,7 @@ fi
# regenerated from their corresponding *.in files by ./configure anyway.
touch README INSTALL
-autoreconf --force --install --verbose || exit $?
+AUTOPOINT=true autoreconf --force --install --verbose || exit $?
cd "$olddir"
test -n "$NOCONFIGURE" || "$srcdir/configure" "$@"
diff --git a/m4macros/Makefile.am b/m4macros/Makefile.am
index f80622f..24a496d 100644
--- a/m4macros/Makefile.am
+++ b/m4macros/Makefile.am
@@ -15,3 +15,5 @@ EXTRA_DIST += \
m4datadir = $(datadir)/aclocal
m4data_DATA = $(installed_m4)
+
+EXTRA_DIST = gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4
diff --git a/m4macros/gettext.m4 b/m4macros/gettext.m4
new file mode 100644
index 0000000..b522a37
--- /dev/null
+++ b/m4macros/gettext.m4
@@ -0,0 +1,405 @@
+# gettext.m4 serial 67 (gettext-0.19.6)
+dnl Copyright (C) 1995-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1995-2000.
+dnl Bruno Haible <haible clisp cons org>, 2000-2006, 2008-2010.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value '$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
+ [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define([gt_included_intl],
+ ifelse([$1], [external],
+ ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
+ [yes]))
+ define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+ gt_NEEDS_INIT
+ AM_GNU_GETTEXT_NEED([$2])
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation.
+ gt_INTL_MACOSX
+
+ dnl Set USE_NLS.
+ AC_REQUIRE([AM_NLS])
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl Add a version number to the cache macros.
+ case " $gt_needs " in
+ *" need-formatstring-macros "*) gt_api_version=3 ;;
+ *" need-ngettext "*) gt_api_version=2 ;;
+ *) gt_api_version=1 ;;
+ esac
+ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH([included-gettext],
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ if test $gt_api_version -ge 3; then
+ gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+ else
+ gt_revision_test_code=
+ fi
+ if test $gt_api_version -ge 2; then
+ gt_expression_test_code=' + * ngettext ("", "", 0)'
+ else
+ gt_expression_test_code=
+ fi
+
+ AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+ [AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+ ]],
+ [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+ ]])],
+ [eval "$gt_func_gnugettext_libc=yes"],
+ [eval "$gt_func_gnugettext_libc=no"])])
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ [$gt_func_gnugettext_libintl],
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+ ]],
+ [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ]])],
+ [eval "$gt_func_gnugettext_libintl=yes"],
+ [eval "$gt_func_gnugettext_libintl=no"])
+ dnl Now see whether libintl exists and depends on libiconv.
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n
"$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+ ]],
+ [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ]])],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ eval "$gt_func_gnugettext_libintl=yes"
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV
$LIBTHREAD"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a
$LTLIBICONV $LTLIBTHREAD"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ CATOBJEXT=
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Some extra flags are needed during linking.
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE([ENABLE_NLS], [1],
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ AC_MSG_CHECKING([whether to use NLS])
+ AC_MSG_RESULT([$USE_NLS])
+ if test "$USE_NLS" = "yes"; then
+ AC_MSG_CHECKING([where the gettext function comes from])
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ AC_MSG_RESULT([$gt_source])
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE([HAVE_GETTEXT], [1],
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE([HAVE_DCGETTEXT], [1],
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST([BUILD_INCLUDED_LIBINTL])
+ AC_SUBST([USE_INCLUDED_LIBINTL])
+ AC_SUBST([CATOBJEXT])
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST([DATADIRNAME])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST([INSTOBJEXT])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST([GENCAT])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLOBJS=
+ if test "$USE_INCLUDED_LIBINTL" = yes; then
+ INTLOBJS="\$(GETTOBJS)"
+ fi
+ AC_SUBST([INTLOBJS])
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST([INTLLIBS])
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST([LIBINTL])
+ AC_SUBST([LTLIBINTL])
+ AC_SUBST([POSUB])
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+ m4_divert_text([DEFAULTS], [gt_needs=])
+ m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
+
+
+dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], [])
diff --git a/m4macros/iconv.m4 b/m4macros/iconv.m4
new file mode 100644
index 0000000..4e37363
--- /dev/null
+++ b/m4macros/iconv.m4
@@ -0,0 +1,271 @@
+# iconv.m4 serial 19 (gettext-0.18.2)
+dnl Copyright (C) 2000-2002, 2007-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[
+#include <stdlib.h>
+#include <iconv.h>
+ ]],
+ [[iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);]])],
+ [am_cv_func_iconv=yes])
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[
+#include <stdlib.h>
+#include <iconv.h>
+ ]],
+ [[iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);]])],
+ [am_cv_lib_iconv=yes]
+ [am_cv_func_iconv=yes])
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
+ dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
+ dnl Solaris 10.
+ am_save_LIBS="$LIBS"
+ if test $am_cv_lib_iconv = yes; then
+ LIBS="$LIBS $LIBICONV"
+ fi
+ am_cv_func_iconv_works=no
+ for ac_iconv_const in '' 'const'; do
+ AC_RUN_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[
+#include <iconv.h>
+#include <string.h>
+
+#ifndef ICONV_CONST
+# define ICONV_CONST $ac_iconv_const
+#endif
+ ]],
+ [[int result = 0;
+ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+ returns. */
+ {
+ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+ if (cd_utf8_to_88591 != (iconv_t)(-1))
+ {
+ static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
+ char buf[10];
+ ICONV_CONST char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_utf8_to_88591,
+ &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ result |= 1;
+ iconv_close (cd_utf8_to_88591);
+ }
+ }
+ /* Test against Solaris 10 bug: Failures are not distinguishable from
+ successful returns. */
+ {
+ iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+ if (cd_ascii_to_88591 != (iconv_t)(-1))
+ {
+ static ICONV_CONST char input[] = "\263";
+ char buf[10];
+ ICONV_CONST char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_ascii_to_88591,
+ &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ result |= 2;
+ iconv_close (cd_ascii_to_88591);
+ }
+ }
+ /* Test against AIX 6.1..7.1 bug: Buffer overrun. */
+ {
+ iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+ if (cd_88591_to_utf8 != (iconv_t)(-1))
+ {
+ static ICONV_CONST char input[] = "\304";
+ static char buf[2] = { (char)0xDE, (char)0xAD };
+ ICONV_CONST char *inptr = input;
+ size_t inbytesleft = 1;
+ char *outptr = buf;
+ size_t outbytesleft = 1;
+ size_t res = iconv (cd_88591_to_utf8,
+ &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+ result |= 4;
+ iconv_close (cd_88591_to_utf8);
+ }
+ }
+#if 0 /* This bug could be worked around by the caller. */
+ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
+ {
+ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+ if (cd_88591_to_utf8 != (iconv_t)(-1))
+ {
+ static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+ char buf[50];
+ ICONV_CONST char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_88591_to_utf8,
+ &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if ((int)res > 0)
+ result |= 8;
+ iconv_close (cd_88591_to_utf8);
+ }
+ }
+#endif
+ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+ provided. */
+ if (/* Try standardized names. */
+ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+ /* Try IRIX, OSF/1 names. */
+ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+ /* Try AIX names. */
+ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+ /* Try HP-UX names. */
+ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+ result |= 16;
+ return result;
+]])],
+ [am_cv_func_iconv_works=yes], ,
+ [case "$host_os" in
+ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+ *) am_cv_func_iconv_works="guessing yes" ;;
+ esac])
+ test "$am_cv_func_iconv_works" = no || break
+ done
+ LIBS="$am_save_LIBS"
+ ])
+ case "$am_cv_func_iconv_works" in
+ *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+ *) am_func_iconv=yes ;;
+ esac
+ else
+ am_func_iconv=no am_cv_lib_iconv=no
+ fi
+ if test "$am_func_iconv" = yes; then
+ AC_DEFINE([HAVE_ICONV], [1],
+ [Define if you have the iconv() function and it works.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST([LIBICONV])
+ AC_SUBST([LTLIBICONV])
+])
+
+dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
+dnl avoid warnings like
+dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
+dnl This is tricky because of the way 'aclocal' is implemented:
+dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
+dnl Otherwise aclocal's initial scan pass would miss the macro definition.
+dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
+dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
+dnl warnings.
+m4_define([gl_iconv_AC_DEFUN],
+ m4_version_prereq([2.64],
+ [[AC_DEFUN_ONCE(
+ [$1], [$2])]],
+ [m4_ifdef([gl_00GNULIB],
+ [[AC_DEFUN_ONCE(
+ [$1], [$2])]],
+ [[AC_DEFUN(
+ [$1], [$2])]])]))
+gl_iconv_AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL([am_cv_proto_iconv], [
+ AC_COMPILE_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+ ]],
+ [[]])],
+ [am_cv_proto_iconv_arg1=""],
+ [am_cv_proto_iconv_arg1="const"])
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t
*inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([
+ $am_cv_proto_iconv])
+ AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
+ [Define as const if the declaration of iconv() needs const.])
+ dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
+ m4_ifdef([gl_ICONV_H_DEFAULTS],
+ [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
+ if test -n "$am_cv_proto_iconv_arg1"; then
+ ICONV_CONST="const"
+ fi
+ ])
+ fi
+])
diff --git a/m4macros/lib-ld.m4 b/m4macros/lib-ld.m4
new file mode 100644
index 0000000..91ca911
--- /dev/null
+++ b/m4macros/lib-ld.m4
@@ -0,0 +1,119 @@
+# lib-ld.m4 serial 6
+dnl Copyright (C) 1996-2003, 2009-2015 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid
+dnl collision with libtool.m4.
+
+dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes
+ ;;
+*)
+ acl_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-2.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld [default=no]])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+ # contains only /bin. Note that ksh looks also at the FPATH variable,
+ # so we have to set that as well for the test.
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+ || PATH_SEPARATOR=';'
+ }
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'`
+ while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL([acl_cv_path_LD],
+[if test -z "$LD"; then
+ acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$acl_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT([$LD])
+else
+ AC_MSG_RESULT([no])
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
diff --git a/m4macros/lib-link.m4 b/m4macros/lib-link.m4
new file mode 100644
index 0000000..d8d5d1f
--- /dev/null
+++ b/m4macros/lib-link.m4
@@ -0,0 +1,777 @@
+# lib-link.m4 serial 26 (gettext-0.18.2)
+dnl Copyright (C) 2001-2015 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.54])
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ pushdef([Name],[m4_translit([$1],[./+-], [____])])
+ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ AC_SUBST([LIB]NAME[_PREFIX])
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ popdef([NAME])
+ popdef([Name])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. The missing-message
+dnl defaults to 'no' and may contain additional hints for the user.
+dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
+dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ pushdef([Name],[m4_translit([$1],[./+-], [____])])
+ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
+ dnl because these -l options might require -L options that are present in
+ dnl LIBS. -l options benefit only from the -L options listed before it.
+ dnl Otherwise, add it to the front of LIBS, because it may be a static
+ dnl library that depends on another static library that is present in LIBS.
+ dnl Static libraries benefit only from the static libraries listed after
+ dnl it.
+ case " $LIB[]NAME" in
+ *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
+ *) LIBS="$LIB[]NAME $LIBS" ;;
+ esac
+ AC_LINK_IFELSE(
+ [AC_LANG_PROGRAM([[$3]], [[$4]])],
+ [ac_cv_lib[]Name=yes],
+ [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ LIB[]NAME[]_PREFIX=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ AC_SUBST([LIB]NAME[_PREFIX])
+ popdef([NAME])
+ popdef([Name])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl acl_libext,
+dnl acl_shlibext,
+dnl acl_libname_spec,
+dnl acl_library_names_spec,
+dnl acl_hardcode_libdir_flag_spec,
+dnl acl_hardcode_libdir_separator,
+dnl acl_hardcode_direct,
+dnl acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ acl_libext="$acl_cv_libext"
+ acl_shlibext="$acl_cv_shlibext"
+ acl_libname_spec="$acl_cv_libname_spec"
+ acl_library_names_spec="$acl_cv_library_names_spec"
+ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ acl_hardcode_direct="$acl_cv_hardcode_direct"
+ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE([rpath],
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_FROMPACKAGE(name, package)
+dnl declares that libname comes from the given package. The configure file
+dnl will then not have a --with-libname-prefix option but a
+dnl --with-package-prefix option. Several libraries can come from the same
+dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
+dnl macro call that searches for libname.
+AC_DEFUN([AC_LIB_FROMPACKAGE],
+[
+ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+ define([acl_frompackage_]NAME, [$2])
+ popdef([NAME])
+ pushdef([PACK],[$2])
+ pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+ define([acl_libsinpackage_]PACKUP,
+ m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1])
+ popdef([PACKUP])
+ popdef([PACK])
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+ pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
+ pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+ pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
+ dnl Autoconf >= 2.61 supports dots in --with options.
+
pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[m4_translit(PACK,[.],[_])],PACK)])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_ARG_WITH(P_A_C_K[-prefix],
+[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib
+ --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ if test "$acl_libdirstem2" != "$acl_libdirstem" \
+ && ! test -d "$withval/$acl_libdirstem"; then
+ additional_libdir="$withval/$acl_libdirstem2"
+ fi
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ LIB[]NAME[]_PREFIX=
+ dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
+ dnl computed. So it has to be reset here.
+ HAVE_LIB[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
+ else
+ shrext=
+ fi
+ if test $use_additional = yes; then
+ dir="$additional_libdir"
+ dnl The same code as in the loop below:
+ dnl First look for a shared library.
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ dnl Then look for a static library.
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ dnl First look for a shared library.
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ dnl Then look for a static library.
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$acl_hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$acl_hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ if test "$name" = '$1'; then
+ LIB[]NAME[]_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ */$acl_libdirstem2 | */$acl_libdirstem2/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+ if test "$name" = '$1'; then
+ LIB[]NAME[]_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e
's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+ popdef([P_A_C_K])
+ popdef([PACKLIBS])
+ popdef([PACKUP])
+ popdef([PACK])
+ popdef([NAME])
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+ AC_REQUIRE([AC_LIB_RPATH])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ $1=
+ if test "$enable_rpath" != no; then
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode directories into the resulting
+ dnl binary.
+ rpathdirs=
+ next=
+ for opt in $2; do
+ if test -n "$next"; then
+ dir="$next"
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem" \
+ && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next=
+ else
+ case $opt in
+ -L) next=yes ;;
+ -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem" \
+ && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next= ;;
+ *) next= ;;
+ esac
+ fi
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n ""$3""; then
+ dnl libtool is used for linking. Use -R options.
+ for dir in $rpathdirs; do
+ $1="${$1}${$1:+ }-R$dir"
+ done
+ else
+ dnl The linker is used for linking directly.
+ if test -n "$acl_hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user
+ dnl must pass all path elements in one option.
+ alldirs=
+ for dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="${$1}${$1:+ }$flag"
+ done
+ fi
+ fi
+ fi
+ fi
+ fi
+ AC_SUBST([$1])
+])
diff --git a/m4macros/lib-prefix.m4 b/m4macros/lib-prefix.m4
new file mode 100644
index 0000000..0465f47
--- /dev/null
+++ b/m4macros/lib-prefix.m4
@@ -0,0 +1,224 @@
+# lib-prefix.m4 serial 7 (gettext-0.18)
+dnl Copyright (C) 2001-2005, 2008-2015 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates
+dnl - a variable acl_libdirstem, containing the basename of the libdir, either
+dnl "lib" or "lib64" or "lib/64",
+dnl - a variable acl_libdirstem2, as a secondary possible value for
+dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
+dnl "lib/amd64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+ dnl There is no formal standard regarding lib and lib64.
+ dnl On glibc systems, the current practice is that on a system supporting
+ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+ dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
+ dnl the compiler's default mode by looking at the compiler's library search
+ dnl path. If at least one of its elements ends in /lib64 or points to a
+ dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
+ dnl Otherwise we use the default, namely "lib".
+ dnl On Solaris systems, the current practice is that on a system supporting
+ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+ dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
+ dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ acl_libdirstem=lib
+ acl_libdirstem2=
+ case "$host_os" in
+ solaris*)
+ dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development
Environment
+ dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
+ dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
+ dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
+ dnl symlink is missing, so we set acl_libdirstem2 too.
+ AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
+ [AC_EGREP_CPP([sixtyfour bits], [
+#ifdef _LP64
+sixtyfour bits
+#endif
+ ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
+ ])
+ if test $gl_cv_solaris_64bit = yes; then
+ acl_libdirstem=lib/64
+ case "$host_cpu" in
+ sparc*) acl_libdirstem2=lib/sparcv9 ;;
+ i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+ esac
+ fi
+ ;;
+ *)
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e
's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ */../ | */.. )
+ # Better ignore directories of this form. They are misleading.
+ ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_IFS"
+ fi
+ ;;
+ esac
+ test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+])
diff --git a/m4macros/nls.m4 b/m4macros/nls.m4
new file mode 100644
index 0000000..53cdc8b
--- /dev/null
+++ b/m4macros/nls.m4
@@ -0,0 +1,32 @@
+# nls.m4 serial 5 (gettext-0.18)
+dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1995-2000.
+dnl Bruno Haible <haible clisp cons org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_NLS],
+[
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE([nls],
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT([$USE_NLS])
+ AC_SUBST([USE_NLS])
+])
diff --git a/m4macros/po.m4 b/m4macros/po.m4
new file mode 100644
index 0000000..43012dc
--- /dev/null
+++ b/m4macros/po.m4
@@ -0,0 +1,453 @@
+# po.m4 serial 24 (gettext-0.19)
+dnl Copyright (C) 1995-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1995-2000.
+dnl Bruno Haible <haible clisp cons org>, 2000-2003.
+
+AC_PREREQ([2.60])
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+ AC_REQUIRE([AC_PROG_SED])dnl
+ AC_REQUIRE([AM_NLS])dnl
+
+ dnl Release version of the gettext macros. This is used to ensure that
+ dnl the gettext macros and po/Makefile.in.in are in sync.
+ AC_SUBST([GETTEXT_MACRO_VERSION], [0.19])
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else
exit 0; fi)],
+ :)
+ AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
+
+ dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([GMSGFMT_015])
+
+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null
&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null
| grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([XGETTEXT_015])
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+ dnl Installation directories.
+ dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
+ dnl have to define it here, so that it can be used in po/Makefile.
+ test -n "$localedir" || localedir='${datadir}/locale'
+ AC_SUBST([localedir])
+
+ dnl Support for AM_XGETTEXT_OPTION.
+ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+ AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+ AC_CONFIG_COMMANDS([po-directories], [[
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ gt_tab=`printf '\t'`
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,
$top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo
"setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e
"s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e
"s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g"
"$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done]],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+ # When this code is run, in config.status, two variables have already been
+ # set:
+ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+ # - LINGUAS is the value of the environment variable LINGUAS at configure
+ # time.
+
+changequote(,)dnl
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ # Find a way to echo strings without interpreting backslash.
+ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='echo'
+ else
+ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='printf %s\n'
+ else
+ echo_func () {
+ cat <<EOT
+$*
+EOT
+ }
+ gt_echo='echo_func'
+ fi
+ fi
+
+ # A sed script that extracts the value of VARIABLE from a Makefile.
+ tab=`printf '\t'`
+ sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
+ # Seen the first line of the variable definition.
+ s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
+ ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+ # Set POTFILES to the value of the Makefile variable POTFILES.
+ sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+ # Compute POTFILES_DEPS as
+ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+ POTFILES_DEPS=
+ for file in $POTFILES; do
+ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+ done
+ POMAKEFILEDEPS=""
+
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting
ALL_LINGUAS in configure.in is obsolete"
+ fi
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+ sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+ ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+ fi
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ # Compute PROPERTIESFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+ # Compute CLASSFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+ # Compute QMFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+ # Compute MSGFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+ # Compute RESOURCESDLLFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ PROPERTIESFILES=
+ CLASSFILES=
+ QMFILES=
+ MSGFILES=
+ RESOURCESDLLFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+ CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+ QMFILES="$QMFILES $srcdirpre$lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e
'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e
's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ JAVACATALOGS=
+ QTCATALOGS=
+ TCLCATALOGS=
+ CSHARPCATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+ QTCATALOGS="$QTCATALOGS $lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e
'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e
's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ fi
+
+ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e
"s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e
"s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e
"s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e
"s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e
"s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+ tab=`printf '\t'`
+ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e
'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+${tab} echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f
"\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e
's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+${tab} echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f
"\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if test -n "$POMAKEFILEDEPS"; then
+ cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+ fi
+ mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+ XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+ AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
diff --git a/m4macros/progtest.m4 b/m4macros/progtest.m4
new file mode 100644
index 0000000..8706d52
--- /dev/null
+++ b/m4macros/progtest.m4
@@ -0,0 +1,91 @@
+# progtest.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1996-2003, 2005, 2008-2015 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1996.
+
+AC_PREREQ([2.50])
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+ # contains only /bin. Note that ksh looks also at the FPATH variable,
+ # so we have to set that as well for the test.
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+ && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+ || PATH_SEPARATOR=';'
+ }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL([ac_cv_path_$1],
+[case "[$]$1" in
+ [[\\/]]* | ?:[[\\/]]*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$][$1])
+else
+ AC_MSG_RESULT([no])
+fi
+AC_SUBST([$1])dnl
+])
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
new file mode 100644
index 0000000..65184f6
--- /dev/null
+++ b/po/Makefile.in.in
@@ -0,0 +1,475 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper gnu ai mit edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.19
+GETTEXT_MACRO_VERSION = 0.19
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SED = @SED@
+SHELL = /bin/sh
+ SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo
$${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo
$${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: all- USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+ test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version
$(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+ exit 1; \
+ }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ @$(CHECK_MACRO_VERSION)
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ package_gnu="$(PACKAGE_GNU)"; \
+ test -n "$$package_gnu" || { \
+ if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+ LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f \
+ -size -10000000c -exec grep 'GNU @PACKAGE@' \
+ /dev/null '{}' ';' 2>/dev/null; \
+ else \
+ LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
+ fi; \
+ } | grep -v 'libtool:' >/dev/null; then \
+ package_gnu=yes; \
+ else \
+ package_gnu=no; \
+ fi; \
+ }; \
+ if test "$$package_gnu" = "yes"; then \
+ package_prefix='GNU '; \
+ else \
+ package_prefix=''; \
+ fi; \
+ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+ else \
+ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+ fi; \
+ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ *) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --package-name="$${package_prefix} PACKAGE@" \
+ --package-version='@VERSION@' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ esac
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) \
+ && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
+ esac; \
+ }; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data- USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> '
/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null
|| \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo
$(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo
$(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data- USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> '
/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data- USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir) || exit 1; \
+ else \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'."
1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o
$$lang.new.po"; \
+ cd $(srcdir); \
+ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po
$(DOMAIN).pot;; \
+ esac; \
+ }; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && @SHELL@ ./config.status $(subdir)/$ in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/po/Makevars.template b/po/Makevars.template
new file mode 100644
index 0000000..0648ec7
--- /dev/null
+++ b/po/Makevars.template
@@ -0,0 +1,78 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty. If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU =
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context. Possible values are "yes" and "no". Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = no
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+# --previous to keep previous msgids of translated messages,
+# --quiet to reduce the verbosity.
+MSGMERGE_OPTIONS =
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed. Possible values are "yes" and "no". Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist". Possible values are "yes" and
+# "no". Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
diff --git a/po/Rules-quot b/po/Rules-quot
new file mode 100644
index 0000000..9dc9630
--- /dev/null
+++ b/po/Rules-quot
@@ -0,0 +1,58 @@
+# This file, Rules-quot, can be copied and used freely without restrictions.
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en quot header en boldquot header insert-header.sin
Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en quot po-create:
+ $(MAKE) en quot po-update
+en boldquot po-create:
+ $(MAKE) en boldquot po-update
+
+en quot po-update: en quot po-update-en
+en boldquot po-update: en boldquot po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd
$(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+ | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+ { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+ $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+ ;; \
+ *) \
+ $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+ ;; \
+ esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+ ; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en quot insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en quot header/g' $(srcdir)/insert-header.sin > en quot insert-header
+
+en boldquot insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en boldquot header/g' $(srcdir)/insert-header.sin > en boldquot
insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
diff --git a/po/boldquot.sed b/po/boldquot.sed
new file mode 100644
index 0000000..4b937aa
--- /dev/null
+++ b/po/boldquot.sed
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“[1m/g
+s/”/[0m”/g
+s/‘/‘[1m/g
+s/’/[0m’/g
diff --git a/po/en boldquot header b/po/en boldquot header
new file mode 100644
index 0000000..fedb6a0
--- /dev/null
+++ b/po/en boldquot header
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff --git a/po/en quot header b/po/en quot header
new file mode 100644
index 0000000..a9647fc
--- /dev/null
+++ b/po/en quot header
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff --git a/po/insert-header.sin b/po/insert-header.sin
new file mode 100644
index 0000000..b26de01
--- /dev/null
+++ b/po/insert-header.sin
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/quot.sed b/po/quot.sed
new file mode 100644
index 0000000..0122c46
--- /dev/null
+++ b/po/quot.sed
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
new file mode 100644
index 0000000..2436c49
--- /dev/null
+++ b/po/remove-potcdate.sin
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
