GNOME.org
 

[orca/gnome-3-10] Remove incorrect/obsolete information from Orca's help content

commit 5531f5d5cdf5e122485687205c1aab9f47467a6f
Author: Joanmarie Diggs <jdiggs igalia com>
Date:   Mon Sep 30 09:15:25 2013 -0400

    Remove incorrect/obsolete information from Orca's help content

 help/C/commands_controlling_orca.page |   34 +++++++++-------------
 help/C/howto_learn_modes.page         |   22 ++++++--------
 help/C/howto_setting_up_orca.page     |   50 ++++-----------------------------
 help/C/howto_text_setup.page          |   24 +--------------
 help/C/howto_the_orca_modifier.page   |    2 +-
 help/C/introduction.page              |   36 ++++++++++--------------
 help/C/preferences_braille.page       |   13 --------
 7 files changed, 48 insertions(+), 133 deletions(-)
---
diff --git a/help/C/commands_controlling_orca.page b/help/C/commands_controlling_orca.page
index fb468d8..d2c3da2 100644
--- a/help/C/commands_controlling_orca.page
+++ b/help/C/commands_controlling_orca.page
@@ -20,26 +20,27 @@
     <title>Commands for Controlling <app>Orca</app></title>
     <p>
       The following commands can be used to get into <app>Orca</app>'s
-      Preferences dialogs, quit <app>Orca</app>, and bypass <app>Orca</app>
-      commands to avoid shortcut conflicts within the application being accessed.
+      Preferences dialogs, toggle <app>Orca</app> on and off, and bypass
+      <app>Orca</app> commands to avoid shortcut conflicts within the
+      application being accessed.
     </p>
     <list>
       <item>
         <p>
-          <link xref="preferences">Orca Preferences</link> dialog:
-          <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
+          Toggle <app>Orca</app> on and off in GNOME:
+          <keyseq><key>Super</key><key>Alt</key><key>S</key></keyseq>.
         </p>
       </item>
       <item>
         <p>
-          Orca's Preferences dialog for the focused application:
-          <keyseq><key>Ctrl</key><key>Orca Modifier</key><key>Space</key></keyseq>.
+          <link xref="preferences">Orca Preferences</link> dialog:
+          <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
         </p>
       </item>
       <item>
         <p>
-          Quit <app>Orca</app>:
-          <keyseq><key>Orca Modifier</key><key>Q</key></keyseq>.
+          Orca's Preferences dialog for the focused application:
+          <keyseq><key>Ctrl</key><key>Orca Modifier</key><key>Space</key></keyseq>.
         </p>
       </item>
       <item>
@@ -53,11 +54,10 @@
   <section id="learning">
     <title>Commands for Learning to Use <app>Orca</app></title>
     <p>
-      Orca has two modes for learning more about <app>Orca</app>'s commands:
-      Learn Mode and List Shortcuts Mode. In Learn Mode, <app>Orca</app> will
-      announce each keystroke you pressed along with any associated
-      <app>Orca</app> command that keystroke is bound to. List Shortcuts Mode
-      provides you with a list of all the <app>Orca</app> commands you can use.
+      In Learn Mode, <app>Orca</app> will announce each keystroke you pressed
+      along with any associated <app>Orca</app> command that keystroke is bound
+      to. In this mode, you can also get a list of shortcuts containing all the
+      <app>Orca</app> commands you can use.
     </p>
     <list>
       <item>
@@ -68,13 +68,7 @@
       </item>
       <item>
         <p>
-          Enter list shortcuts mode:
-         <keyseq><key>Orca Modifier</key><key>H</key></keyseq> (double-clicked)
-        </p>
-      </item>
-      <item>
-        <p>
-          Exit either mode:
+          Exit learn mode:
           <keyseq><key>Esc</key></keyseq>
         </p>
       </item>
diff --git a/help/C/howto_learn_modes.page b/help/C/howto_learn_modes.page
index eecaa21..1d98b75 100644
--- a/help/C/howto_learn_modes.page
+++ b/help/C/howto_learn_modes.page
@@ -2,7 +2,7 @@
   <info>
     <link type="guide" xref="index#getting_started" />
     <link type="next" xref="howto_keyboard_layout" />
-    <title type="sort">5. The "Learn" Modes</title>
+    <title type="sort">5. "Learn" Mode</title>
     <desc>
       Discovering <app>Orca</app>'s commands
     </desc>
@@ -14,14 +14,12 @@
       <p>Creative Commons Share Alike 3.0</p>
     </license>
   </info>
-  <title>The "Learn" Modes</title>
+  <title>"Learn" Mode</title>
   <p>
-    Orca has two modes for learning more about <app>Orca</app>'s commands:
-    Learn Mode and List Shortcuts Mode. In Learn Mode, <app>Orca</app>
-    will announce each keystroke you pressed along with any associated
-    <app>Orca</app> command that keystroke is bound to. List Shortcuts
-    Mode provides you with a list of all the <app>Orca</app> commands
-    you can use.
+    In Learn Mode, <app>Orca</app> will announce each keystroke you pressed
+    along with any associated <app>Orca</app> command that keystroke is bound
+    to. In this mode, you can also get a list of shortcuts containing all the
+    <app>Orca</app> commands you can use.
   </p>
   <steps>
     <title>Using Learn Mode</title>
@@ -42,11 +40,11 @@
     </item>
   </steps>
   <steps>
-    <title>Using List Shortcuts Mode</title>
+    <title>Getting a List of Shortcuts</title>
     <item>
       <p>
-        Get into List Shortcuts Mode by pressing <keyseq><key>Orca Modifier</key>
-        <key>H</key></keyseq> twice quickly.
+        Get into Learn Mode by pressing <keyseq><key>Orca Modifier</key>
+        <key>H</key></keyseq>.
       </p>
     </item>
     <item>
@@ -64,7 +62,7 @@
     </item>
     <item>
       <p>
-        Press <key>Esc</key> to exit List Shortcuts Mode.
+        Press <key>Esc</key> to exit the list.
       </p>
     </item>
   </steps>
diff --git a/help/C/howto_setting_up_orca.page b/help/C/howto_setting_up_orca.page
index 0593bba..40989f8 100644
--- a/help/C/howto_setting_up_orca.page
+++ b/help/C/howto_setting_up_orca.page
@@ -3,10 +3,10 @@
   <link type="seealso" xref="preferences" />
   <link type="guide" xref="index#getting_started" />
   <link type="next" xref="howto_the_orca_modifier" />
-  <title type="sort">3. Orca Configuration</title>
+  <title type="sort">4. Orca Configuration</title>
   <title type="link">Configuration</title>
     <desc>
-      Setting up <app>Orca</app> initially and in the future
+      Setting up <app>Orca</app>
     </desc>
     <credit type="author">
       <name>Joanmarie Diggs</name>
@@ -17,47 +17,17 @@
     </license>
   </info>
   <title>Orca Configuration</title>
-    <section id="initial_setup">
-      <title>Initial Setup</title>
-      <p>
-        When you run <app>Orca</app> for the first time, it will automatically
-        enter setup mode. Depending on your active session's configuration,
-        one of two things will occur:
-      </p>
-      <list>
-        <item>
-          <p>
-            If accessibility support has already been enabled for your
-            session, you will be placed in the <app>Orca</app>
-            <link xref="preferences">Preferences</link> dialog box where
-            you can customize <app>Orca</app> completely and then use it
-            immediately.
-          </p>
-        </item>
-        <item>
-          <p>
-            If accessibility support has not already been enabled for your
-            session, <app>Orca</app>'s <link xref="howto_text_setup">text-based
-            setup</link> will be launched instead. The text-based setup allows
-            you to configure the most fundamental settings and enable
-            accessibility support for your session. You will need to log out
-            and log back in for the new settings to take effect.
-          </p>
-        </item>
-      </list>
-    </section>
     <section id="configuring_orca">
-      <title>Configuring <app>Orca</app> in the Future</title>
       <p>
-        If you want to configure <app>Orca</app> in the future, you can do one
+        If you want to configure <app>Orca</app>, you can do one
         of the following:
       </p>
       <list>
         <item>
           <p>
-            Pass the <cmd>--setup</cmd> option to <app>Orca</app> the next
-            time you run it to automatically be placed in the <link
-            xref="preferences">Preferences</link> dialog box.
+            Get into the <link xref="preferences">Preferences</link> dialog
+            by pressing <keyseq><key>Orca Modifier</key><key>Space</key>
+            </keyseq> from within any accessible application.
           </p>
         </item>
         <item>
@@ -67,14 +37,6 @@
             setup</link>.
           </p>
         </item> 
-        <item>
-          <p>
-            Get into the <link xref="preferences">Preferences</link> dialog
-            box by pressing the <gui>Preferences</gui> button in the <app>Orca</app>
-            main window or by pressing <keyseq><key>Orca Modifier</key><key>Space</key>
-            </keyseq> from within any accessible application.
-          </p>
-        </item>
       </list>
     </section>
 </page>
diff --git a/help/C/howto_text_setup.page b/help/C/howto_text_setup.page
index b0264f6..117fa6b 100644
--- a/help/C/howto_text_setup.page
+++ b/help/C/howto_text_setup.page
@@ -165,29 +165,9 @@
         recover gracefully and function even if it cannot find BrlTTY.
       </p>
     </item>
-    <item>
-      <p>Enable Braille Monitor</p>
-      <p>
-        Orca's Braille Monitor is an on-screen braille representation. This is
-        mostly for sighted developers who need to verify BrlTTY output, but may
-        also be useful in other situations, such as visually diagnosing or verifying
-        braille output. Type <cmd>y</cmd> or <cmd>n</cmd> and press <key>Return</key>.
-      </p>
-    </item>
-    <item>
-      <p>Automatically start <app>Orca</app> when you log in</p>
-      <p>
-        Type <cmd>y</cmd> if you want <app>Orca</app> automatically launched for you
-        or <cmd>n</cmd> if you do not, and press <key>Return</key>.
-      </p>
-    </item>
   </steps>
   <p>
-    That's it. <app>Orca</app> is now ready for use. If accessibility was not
-    yet enabled, <app>Orca</app> does so now and asks you to logout and back
-    in for the services to start. Type <cmd>y</cmd> and press <key>Return</key>
-    to restart your login session. If, on the other hand, accessibility was
-    already enabled, you will simply be prompted to press <key>Return</key>
-    after which <app>Orca</app> will be launched for you.
+    That's it. <app>Orca</app> is now ready for use and will be launched if
+    you are in a graphical desktop environment where accessibility is enabled.
   </p>
 </page>
diff --git a/help/C/howto_the_orca_modifier.page b/help/C/howto_the_orca_modifier.page
index 2c98e34..9d97e06 100644
--- a/help/C/howto_the_orca_modifier.page
+++ b/help/C/howto_the_orca_modifier.page
@@ -2,7 +2,7 @@
   <info>
     <link type="guide" xref="index#getting_started"/>
     <link type="next" xref="howto_learn_modes" />
-    <title type="sort">4. The Orca Modifier</title>
+    <title type="sort">3. The Orca Modifier</title>
     <desc>
         A key that works like <key>Shift</key>, <key>Ctrl</key>,
         and <key>Alt</key>
diff --git a/help/C/introduction.page b/help/C/introduction.page
index 314245f..35a96c3 100644
--- a/help/C/introduction.page
+++ b/help/C/introduction.page
@@ -35,13 +35,6 @@
     <list>
       <item>
         <p>
-          Type <cmd>orca</cmd>, along with any optional parameters, in a
-          terminal window or within the <gui>Run</gui> dialog and then press
-          <key>Return</key>.
-        </p>
-      </item>
-      <item>
-        <p>
           The method for configuring <app>Orca</app> to be launched
           automatically as your preferred screen reader will depend upon
           which desktop environment you use. For instance, in GNOME 3.x
@@ -49,25 +42,26 @@
           panel on the <gui>Seeing</gui> page.
         </p>
       </item>
+      <item>
+        <p>
+          To toggle <app>Orca</app> on and off in GNOME, press
+          <keyseq><key>Super</key><key>Alt</key><key>S</key></keyseq>.
+        </p>
+      </item>
+      <item>
+        <p>
+          Type <cmd>orca</cmd>, along with any optional parameters, in a
+          terminal window or within the <gui>Run</gui> dialog and then press
+          <key>Return</key>.
+        </p>
+      </item>
     </list>
   </section>
-  <section id="quitting">
-    <title>Quitting <app>Orca</app></title>
-      <p>To quit <app>Orca</app>:</p>
-      <list>
-        <item>
-          <p>
-            Press <keyseq><key>Orca Modifier</key><key>Q</key></keyseq>.
-            This command works whether the <app>Orca</app> main window is
-            enabled or not.
-          </p>
-        </item>
-      </list>
-    </section>
     <section id="loadtime">
       <title>Load-Time Options</title>
       <p>
-        The following options can be specified when launching <app>Orca</app>:
+        The following options can be specified when launching <app>Orca</app>
+       in a terminal window or within the <gui>Run</gui> dialog:
       </p>
       <list>
         <item>
diff --git a/help/C/preferences_braille.page b/help/C/preferences_braille.page
index e5873bc..66e8010 100644
--- a/help/C/preferences_braille.page
+++ b/help/C/preferences_braille.page
@@ -35,19 +35,6 @@
       </p>
     </note>
   </section>
-  <section id="braillemonitor">
-    <title>Enable Braille Monitor</title>
-    <media type="image" mime="image/png" src="figures/preferences_enable_braille_monitor.png"/>
-    <p>
-      Orca's braille monitor provides an on-screen representation of what
-      takes place on the braille display. This feature is mostly for
-      demonstration purposes, but is also useful for <app>Orca</app>
-      developers who do not have access to a braille display.
-    </p>
-    <p>
-      Default value: not checked
-    </p>
-  </section>
   <section id="contractedbraille">
     <title>Enable Contracted Braille</title>
     <media type="image" mime="image/png" src="figures/preferences_braille_contracted.png"/>
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]