[gnome-color-manager] Updated Norwegian bokmål transla tion

From: Kjartan Maraas <kmaraas src gnome org>
To: commits-list gnome org
Cc:
Subject: [gnome-color-manager] Updated Norwegian bokmål transla tion
Date: Tue, 30 Jul 2013 18:04:34 +0000 (UTC)
commit 92d98014219331317210bc8addd7d5c5c0fea769
Author: Kjartan Maraas <kmaraas gnome org>
Date:   Tue Jul 30 20:04:30 2013 +0200

    Updated Norwegian bokmål translation

 po/nb.po |  337 ++++++++++++++++++++++++++++++++------------------------------
 1 files changed, 174 insertions(+), 163 deletions(-)
---
diff --git a/po/nb.po b/po/nb.po
index 9df39c0..c6c06f2 100644
--- a/po/nb.po
+++ b/po/nb.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: gnome-color-manager 3.9.x\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-05-20 14:10+0200\n"
-"PO-Revision-Date: 2013-05-20 14:11+0200\n"
+"POT-Creation-Date: 2013-07-30 20:03+0200\n"
+"PO-Revision-Date: 2013-07-30 20:04+0200\n"
 "Last-Translator: Kjartan Maraas <kmaraas gnome org>\n"
 "Language-Team: Norwegian Bokmål <i18n-nb lister ping uio no>\n"
 "Language: nb\n"
@@ -267,17 +267,18 @@ msgstr "Navngitte farger"
 #: ../data/gcm-viewer.ui.h:52
 msgid ""
 "Metadata is additional information stored in the profile for programs to use."
-msgstr "Metadata er tilleggsinformasjon som lagres i profilen for bruk av programmer."
+msgstr ""
+"Metadata er tilleggsinformasjon som lagres i profilen for bruk av programmer."
 
 #: ../data/gcm-viewer.ui.h:53
 msgid "Metadata"
 msgstr "Metadata"
 
-#: ../src/gcm-calibrate-argyll.c:349
+#: ../src/gcm-calibrate-argyll.c:355
 msgid "Getting default parameters"
 msgstr "Henter forvalgte parametere"
 
-#: ../src/gcm-calibrate-argyll.c:354
+#: ../src/gcm-calibrate-argyll.c:360
 msgid ""
 "This pre-calibrates the screen by sending colored and gray patches to your "
 "screen and measuring them with the hardware device."
@@ -285,19 +286,19 @@ msgstr ""
 "Dette forhåndskalibrerer skjermen ved å sende fargede og grå lapper til "
 "skjermen for så å måle dem med måleinstrumentet."
 
-#: ../src/gcm-calibrate-argyll.c:446
+#: ../src/gcm-calibrate-argyll.c:452
 msgid "Reading the patches"
 msgstr "Leser lappene"
 
-#: ../src/gcm-calibrate-argyll.c:451
+#: ../src/gcm-calibrate-argyll.c:457
 msgid "Reading the patches using the color measuring instrument."
 msgstr "Leser lappene ved å bruke fargemåleinstrumentet."
 
-#: ../src/gcm-calibrate-argyll.c:555
+#: ../src/gcm-calibrate-argyll.c:561
 msgid "Drawing the patches"
 msgstr "Tegner lapper"
 
-#: ../src/gcm-calibrate-argyll.c:560
+#: ../src/gcm-calibrate-argyll.c:566
 msgid ""
 "Drawing the generated patches to the screen, which will then be measured by "
 "the hardware device."
@@ -305,47 +306,47 @@ msgstr ""
 "Tegner lappene som ble laget til skjermen, som så vil måles av "
 "måleinstrumentet."
 
-#: ../src/gcm-calibrate-argyll.c:659 ../src/gcm-calibrate-argyll.c:1020
+#: ../src/gcm-calibrate-argyll.c:665 ../src/gcm-calibrate-argyll.c:1026
 msgid "Generating the profile"
 msgstr "Lager profilen"
 
-#: ../src/gcm-calibrate-argyll.c:664
+#: ../src/gcm-calibrate-argyll.c:670
 msgid "Generating the ICC color profile that can be used with this screen."
 msgstr "Lager ICC-fargeprofil som kan brukes med denne skjermen."
 
-#: ../src/gcm-calibrate-argyll.c:834
+#: ../src/gcm-calibrate-argyll.c:840
 msgid "Copying files"
 msgstr "Kopierer filer"
 
-#: ../src/gcm-calibrate-argyll.c:839
+#: ../src/gcm-calibrate-argyll.c:845
 msgid "Copying source image, chart data and CIE reference values."
 msgstr "Kopierer kildebilde, diagramdata og CIE-referanseverdier."
 
-#: ../src/gcm-calibrate-argyll.c:910
+#: ../src/gcm-calibrate-argyll.c:916
 msgid "Measuring the patches"
 msgstr "Måler lappene"
 
-#: ../src/gcm-calibrate-argyll.c:915
+#: ../src/gcm-calibrate-argyll.c:921
 msgid "Detecting the reference patches and measuring them."
 msgstr "Finner referanselappene og måler dem."
 
-#: ../src/gcm-calibrate-argyll.c:1025
+#: ../src/gcm-calibrate-argyll.c:1031
 msgid "Generating the ICC color profile that can be used with this device."
 msgstr "Lager ICC-fargeprofil som kan brukes med denne enheten."
 
-#: ../src/gcm-calibrate-argyll.c:1390
+#: ../src/gcm-calibrate-argyll.c:1396
 msgid "Printing patches"
 msgstr "Skriver ut lapper"
 
-#: ../src/gcm-calibrate-argyll.c:1395
+#: ../src/gcm-calibrate-argyll.c:1401
 msgid "Rendering the patches for the selected paper and ink."
 msgstr "Tegner lappene for det valgte papiret og blekket."
 
-#: ../src/gcm-calibrate-argyll.c:1769
+#: ../src/gcm-calibrate-argyll.c:1782
 msgid "Wait for the ink to dry"
 msgstr "Vent på at blekket skal tørke"
 
-#: ../src/gcm-calibrate-argyll.c:1774
+#: ../src/gcm-calibrate-argyll.c:1787
 msgid ""
 "Please wait a few minutes for the ink to dry. Profiling damp ink will "
 "produce a poor profile and may damage your color measuring instrument."
@@ -353,48 +354,48 @@ msgstr ""
 "Vent noen minutter på at blekket skal tørke. Å lage profil av våt blekk vil "
 "gi dårlig resultat og kan skade måleinstrumentet."
 
-#: ../src/gcm-calibrate-argyll.c:1951
+#: ../src/gcm-calibrate-argyll.c:1964
 msgid "Set up instrument"
 msgstr "Sett opp instrument"
 
-#: ../src/gcm-calibrate-argyll.c:1956
+#: ../src/gcm-calibrate-argyll.c:1969
 msgid "Setting up the instrument for use…"
 msgstr "Setter opp instrumentet for bruk …"
 
-#: ../src/gcm-calibrate-argyll.c:2168 ../src/gcm-calibrate-argyll.c:2234
+#: ../src/gcm-calibrate-argyll.c:2181 ../src/gcm-calibrate-argyll.c:2247
 msgid "Calibration error"
 msgstr "Feil ved kalibrering"
 
-#: ../src/gcm-calibrate-argyll.c:2173
+#: ../src/gcm-calibrate-argyll.c:2186
 msgid "The sample could not be read at this time."
 msgstr "Prøven kunne ikkje leses for øyeblikket."
 
-#: ../src/gcm-calibrate-argyll.c:2180 ../src/gcm-calibrate-argyll.c:2305
-#: ../src/gcm-calibrate-argyll.c:2331 ../src/gcm-calibrate-argyll.c:2368
-#: ../src/gcm-calibrate-argyll.c:2395
+#: ../src/gcm-calibrate-argyll.c:2193 ../src/gcm-calibrate-argyll.c:2318
+#: ../src/gcm-calibrate-argyll.c:2344 ../src/gcm-calibrate-argyll.c:2381
+#: ../src/gcm-calibrate-argyll.c:2408
 msgid "Retry"
 msgstr "Prøv igjen"
 
 #. TRANSLATORS: this is the application name for libcanberra
-#: ../src/gcm-calibrate-argyll.c:2186 ../src/gcm-calibrate-argyll.c:2274
-#: ../src/gcm-calibrate-argyll.c:2311 ../src/gcm-calibrate-argyll.c:2337
+#: ../src/gcm-calibrate-argyll.c:2199 ../src/gcm-calibrate-argyll.c:2287
+#: ../src/gcm-calibrate-argyll.c:2324 ../src/gcm-calibrate-argyll.c:2350
 #: ../src/gcm-calibrate.c:440 ../src/gcm-calibrate.c:480
 #: ../src/gcm-calibrate.c:521 ../src/gcm-calibrate-main.c:203
 msgid "GNOME Color Manager"
 msgstr "GNOME fargestyrer"
 
-#: ../src/gcm-calibrate-argyll.c:2240
+#: ../src/gcm-calibrate-argyll.c:2253
 msgid "No firmware is installed for this instrument."
 msgstr "Ingen fastvare er installert for dette instrumentet."
 
-#: ../src/gcm-calibrate-argyll.c:2245
+#: ../src/gcm-calibrate-argyll.c:2258
 msgid ""
 "The pattern match wasn't good enough. Ensure you have the correct type of "
 "target selected."
 msgstr ""
 "Mønstersamstemmelsen var ikke god nok. Påse at du har valgt riktig type mål."
 
-#: ../src/gcm-calibrate-argyll.c:2251
+#: ../src/gcm-calibrate-argyll.c:2264
 msgid ""
 "The measuring instrument got no valid readings. Please ensure the aperture "
 "is fully open."
@@ -402,7 +403,7 @@ msgstr ""
 "Måleinstrumentet fikk ingen gyldige lesinger. Påse at irisblenderen er helt "
 "åpen."
 
-#: ../src/gcm-calibrate-argyll.c:2256
+#: ../src/gcm-calibrate-argyll.c:2269
 msgid ""
 "The measuring instrument is busy and is not starting up. Please remove the "
 "USB plug and re-insert before trying to use this device."
@@ -410,35 +411,35 @@ msgstr ""
 "Måleinstrumentet er opptatt og starter ikke. Koble fra og til USB-kontakten "
 "før du prøver igjen."
 
-#: ../src/gcm-calibrate-argyll.c:2294
+#: ../src/gcm-calibrate-argyll.c:2307
 msgid "Reading target"
 msgstr "Leser mål"
 
-#: ../src/gcm-calibrate-argyll.c:2299
+#: ../src/gcm-calibrate-argyll.c:2312
 msgid "Failed to read the strip correctly."
 msgstr "Stripen ble ikke riktig lest."
 
-#: ../src/gcm-calibrate-argyll.c:2320
+#: ../src/gcm-calibrate-argyll.c:2333
 msgid "Reading sample"
 msgstr "Leser måling"
 
-#: ../src/gcm-calibrate-argyll.c:2325
+#: ../src/gcm-calibrate-argyll.c:2338
 msgid "Failed to read the color sample correctly."
 msgstr "Klarte ikke å lese fargemåling riktig."
 
 #. TRANSLATORS: dialog title, where %s is a letter like 'A'
-#: ../src/gcm-calibrate-argyll.c:2350
+#: ../src/gcm-calibrate-argyll.c:2363
 #, c-format
 msgid "Read strip %s rather than %s!"
 msgstr "Les stripe %s i stedet for %s."
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2355
+#: ../src/gcm-calibrate-argyll.c:2368
 msgid "It looks like you've measured the wrong strip."
 msgstr "Det virker som om du har målt feil stripe."
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2359
+#: ../src/gcm-calibrate-argyll.c:2372
 msgid ""
 "If you've really measured the right one, it's okay, it could just be unusual "
 "paper."
@@ -446,22 +447,22 @@ msgstr ""
 "Om det er den riktige du har målt så er alt som det skal være. Det kan bare "
 "være spesielt papir."
 
-#: ../src/gcm-calibrate-argyll.c:2384
+#: ../src/gcm-calibrate-argyll.c:2397
 msgid "Device Error"
 msgstr "Feil med enhet"
 
-#: ../src/gcm-calibrate-argyll.c:2389
+#: ../src/gcm-calibrate-argyll.c:2402
 msgid "The device could not measure the color spot correctly."
 msgstr "Enheten kunne ikke måle fargepunktet riktig."
 
 #. TRANSLATORS: dialog title, where %s is a letter like 'A'
-#: ../src/gcm-calibrate-argyll.c:2403
+#: ../src/gcm-calibrate-argyll.c:2416
 #, c-format
 msgid "Ready to read strip %s"
 msgstr "Klar til å lese stripe %s"
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2408
+#: ../src/gcm-calibrate-argyll.c:2421
 msgid ""
 "Place the colorimeter on the area of white next to the letter and click and "
 "hold the measure switch."
@@ -470,7 +471,7 @@ msgstr ""
 "trykke og holde målebryteren nede."
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2412
+#: ../src/gcm-calibrate-argyll.c:2425
 msgid ""
 "Slowly scan the target line from left to right and release the switch when "
 "you get to the end of the page."
@@ -479,7 +480,7 @@ msgstr ""
 "enden av siden."
 
 #. TRANSLATORS: dialog message, the sensor has to be above the line
-#: ../src/gcm-calibrate-argyll.c:2416
+#: ../src/gcm-calibrate-argyll.c:2429
 msgid ""
 "Ensure the center of the device is properly aligned with the row you are "
 "trying to measure."
@@ -487,33 +488,33 @@ msgstr ""
 "Påse at senteret på enheten er riktig oppstilt ved raden du forsøker å måle."
 
 #. TRANSLATORS: dialog message, just follow the hardware instructions
-#: ../src/gcm-calibrate-argyll.c:2420
+#: ../src/gcm-calibrate-argyll.c:2433
 msgid ""
 "If you make a mistake, just release the switch, and you'll get a chance to "
 "try again."
 msgstr "Slipp bryteren om du gjør en feil, så vil du kunne prøve på nytt."
 
-#: ../src/gcm-calibrate-argyll.c:2534
+#: ../src/gcm-calibrate-argyll.c:2547
 msgid "Printing"
 msgstr "Skriver ut"
 
-#: ../src/gcm-calibrate-argyll.c:2543
+#: ../src/gcm-calibrate-argyll.c:2556
 msgid "Preparing the data for the printer."
 msgstr "Forbereder data for skriveren."
 
-#: ../src/gcm-calibrate-argyll.c:2551
+#: ../src/gcm-calibrate-argyll.c:2564
 msgid "Sending the targets to the printer."
 msgstr "Sender mål til skriveren."
 
-#: ../src/gcm-calibrate-argyll.c:2557
+#: ../src/gcm-calibrate-argyll.c:2570
 msgid "Printing the targets…"
 msgstr "Skriver ut målene …"
 
-#: ../src/gcm-calibrate-argyll.c:2563
+#: ../src/gcm-calibrate-argyll.c:2576
 msgid "The printing has finished."
 msgstr "Utskrift er fullført."
 
-#: ../src/gcm-calibrate-argyll.c:2569
+#: ../src/gcm-calibrate-argyll.c:2582
 msgid "The print was aborted."
 msgstr "Utskrift ble avbrutt."
 
@@ -580,6 +581,16 @@ msgstr "Vennligst sett målingsinstrumentet i kalibreringsmodus."
 msgid "Select calibration target image"
 msgstr "Velg bilde for kalibreringsmål"
 
+#: ../src/gcm-calibrate.c:683 ../src/gcm-calibrate.c:728
+#: ../src/gcm-calibrate.c:823 ../src/gcm-viewer.c:449
+msgid "_Cancel"
+msgstr "A_vbryt"
+
+#: ../src/gcm-calibrate.c:684 ../src/gcm-calibrate.c:729
+#: ../src/gcm-calibrate.c:824
+msgid "_Open"
+msgstr "_Åpne"
+
 #. TRANSLATORS: filter name on the file->open dialog
 #: ../src/gcm-calibrate.c:694
 msgid "Supported images files"
@@ -606,10 +617,6 @@ msgstr "CIE-verdier"
 msgid "Select ICC Profile File"
 msgstr "Velg fil for ICC-profil"
 
-#: ../src/gcm-calibrate.c:824
-msgid "Open"
-msgstr "Åpne"
-
 #: ../src/gcm-calibrate-main.c:147
 msgid "Calibration is not complete"
 msgstr "Kalibrering er ikke fullført"
@@ -632,32 +639,32 @@ msgid "Profiling completed"
 msgstr "Profilering fullført"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:456 ../src/gcm-calibrate-main.c:1889
+#: ../src/gcm-calibrate-main.c:456 ../src/gcm-calibrate-main.c:1904
 msgid "Failed to calibrate"
 msgstr "Klarte ikke å kalibrere"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:719
+#: ../src/gcm-calibrate-main.c:728
 msgid "Calibrate your camera"
 msgstr "Kalibrer ditt kamera"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:723
+#: ../src/gcm-calibrate-main.c:732
 msgid "Calibrate your display"
 msgstr "Kalibrer din skjerm"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:727
+#: ../src/gcm-calibrate-main.c:736
 msgid "Calibrate your printer"
 msgstr "Kalibrer din skriver"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:731
+#: ../src/gcm-calibrate-main.c:740
 msgid "Calibrate your device"
 msgstr "Kalibrer din enhet"
 
 #. TRANSLATORS: this is the final intro page text
-#: ../src/gcm-calibrate-main.c:743
+#: ../src/gcm-calibrate-main.c:752
 msgid ""
 "Any existing screen correction will be temporarily turned off and the "
 "brightness set to maximum."
@@ -666,51 +673,51 @@ msgstr ""
 "lysstyrken vil settes til maksimum."
 
 #. TRANSLATORS: this is the final intro page text
-#: ../src/gcm-calibrate-main.c:750
+#: ../src/gcm-calibrate-main.c:759
 msgid "You can cancel this process at any stage by pressing the cancel button."
 msgstr ""
 "Du kan avbryte denne prosessen i ethvert steg ved å trykke på avbryt-knappen."
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:756
+#: ../src/gcm-calibrate-main.c:765
 msgid "Introduction"
 msgstr "Innledning"
 
-#: ../src/gcm-calibrate-main.c:844
+#: ../src/gcm-calibrate-main.c:859
 msgid "Show File"
 msgstr "Vis fil"
 
-#: ../src/gcm-calibrate-main.c:847
+#: ../src/gcm-calibrate-main.c:862
 msgid "Click here to show the profile"
 msgstr "Klikk her for å vise profilen"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:870
+#: ../src/gcm-calibrate-main.c:885
 msgid "All done!"
 msgstr "Ferdig!"
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:880
+#: ../src/gcm-calibrate-main.c:895
 msgid "The camera has been calibrated successfully."
 msgstr "Kalibrering av kamera er fullført."
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:884
+#: ../src/gcm-calibrate-main.c:899
 msgid "The display has been calibrated successfully."
 msgstr "Kalibrering av skjerm er fullført."
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:888
+#: ../src/gcm-calibrate-main.c:903
 msgid "The printer has been calibrated successfully."
 msgstr "Kalibrering av skriver er fullført."
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:892
+#: ../src/gcm-calibrate-main.c:907
 msgid "The device has been calibrated successfully."
 msgstr "Kalibrering av enheten er fullført."
 
 #. TRANSLATORS: this is the final summary
-#: ../src/gcm-calibrate-main.c:899
+#: ../src/gcm-calibrate-main.c:914
 msgid ""
 "To view details about the new profile or to undo the calibration visit the "
 "<a href=\"control-center://color\">control center</a>."
@@ -718,7 +725,7 @@ msgstr ""
 "For å vise detaljer om den nye profilen eller for å angre kalibrering gå til "
 "<a href=\"control-center://color\">Kontrollsenter</a>."
 
-#: ../src/gcm-calibrate-main.c:908
+#: ../src/gcm-calibrate-main.c:923
 msgid ""
 "You can use the profile with <a href=\"import-linux\">Linux</a>, <a href="
 "\"import-osx\">Apple OS X</a> and <a href=\"import-windows\">Microsoft "
@@ -729,31 +736,31 @@ msgstr ""
 "Windows</a> systemer."
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:920 ../src/gcm-calibrate-main.c:1902
+#: ../src/gcm-calibrate-main.c:935 ../src/gcm-calibrate-main.c:1917
 msgid "Summary"
 msgstr "Sammendrag"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:944
+#: ../src/gcm-calibrate-main.c:959
 msgid "Performing calibration"
 msgstr "Utfører kalibrering"
 
-#: ../src/gcm-calibrate-main.c:957
+#: ../src/gcm-calibrate-main.c:972
 msgid "Calibration is about to start"
 msgstr "Kalibrering er i ferd med å starte"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:975
+#: ../src/gcm-calibrate-main.c:990
 msgid "Action"
 msgstr "Handling"
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:998
+#: ../src/gcm-calibrate-main.c:1013
 msgid "Calibration checklist"
 msgstr "Sjekkliste for kalibrering"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1005
+#: ../src/gcm-calibrate-main.c:1020
 msgid ""
 "Before calibrating the display, it is recommended to configure your display "
 "with the following settings to get optimal results."
@@ -762,24 +769,24 @@ msgstr ""
 "med de følgende innstillingene."
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:1008
+#: ../src/gcm-calibrate-main.c:1023
 msgid ""
 "You may want to consult the owner's manual for your display on how to "
 "achieve these settings."
 msgstr "Du må kanskje se i skjermens manual for å oppnå disse innstillingene."
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:1011
+#: ../src/gcm-calibrate-main.c:1026
 msgid "Reset your display to the factory defaults."
 msgstr "Nullstill din skjerm til forvalgte verdier fra fabrikken."
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:1014
+#: ../src/gcm-calibrate-main.c:1029
 msgid "Disable dynamic contrast if your display has this feature."
 msgstr "Slå av dynamisk kontrask dersom din skjerm har denne egenskapen."
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:1017
+#: ../src/gcm-calibrate-main.c:1032
 msgid ""
 "Configure your display with custom color settings and ensure the RGB "
 "channels are set to the same values."
@@ -788,19 +795,19 @@ msgstr ""
 "kanalene er stilt til de samme verdiene."
 
 #. TRANSLATORS: dialog message, addition to bullet item
-#: ../src/gcm-calibrate-main.c:1020
+#: ../src/gcm-calibrate-main.c:1035
 msgid "If custom color is not available then use a 6500K color temperature."
 msgstr ""
 "Om egendefinerte farger ikke er tilgjengelige så bruk 6500K fargetemperatur."
 
 #. TRANSLATORS: dialog message, bullet item
-#: ../src/gcm-calibrate-main.c:1023
+#: ../src/gcm-calibrate-main.c:1038
 msgid ""
 "Adjust the display brightness to a comfortable level for prolonged viewing."
 msgstr "Juster lysstyrken til et komfortabelt nivå for seing over lengre tid."
 
 #. TRANSLATORS: dialog message, suffix
-#: ../src/gcm-calibrate-main.c:1028
+#: ../src/gcm-calibrate-main.c:1043
 msgid ""
 "For best results, the display should have been powered for at least 15 "
 "minutes before starting the calibration."
@@ -809,119 +816,119 @@ msgstr ""
 "kalibreringen startes."
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1034
+#: ../src/gcm-calibrate-main.c:1049
 msgid "Check Settings"
 msgstr "Sjekk innstillinger"
 
-#: ../src/gcm-calibrate-main.c:1085
+#: ../src/gcm-calibrate-main.c:1100
 msgid "Calibration and profiling software is not installed."
 msgstr "Kalibrerings- og profileringsprogramvare er ikke installert."
 
-#: ../src/gcm-calibrate-main.c:1088
+#: ../src/gcm-calibrate-main.c:1103
 msgid "These tools are required to build color profiles for devices."
 msgstr "Disse verktøyene kreves for å lage fargeprofiler for enheter."
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1091
+#: ../src/gcm-calibrate-main.c:1106
 msgid "More software is required!"
 msgstr "Mer programvare kreves!"
 
-#: ../src/gcm-calibrate-main.c:1100
+#: ../src/gcm-calibrate-main.c:1115
 msgid "Install required software"
 msgstr "Installer nødvendig programvare"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1110
+#: ../src/gcm-calibrate-main.c:1125
 msgid "Install Tools"
 msgstr "Installer verktøy"
 
 #. TRANSLATORS: dialog message saying the color targets are not installed
-#: ../src/gcm-calibrate-main.c:1160
+#: ../src/gcm-calibrate-main.c:1175
 msgid "Common color target files are not installed on this computer."
 msgstr "Vanlige målfargefiler er ikke installert på denne datamaskinen."
 
 #. TRANSLATORS: dialog message saying the color targets are not installed
-#: ../src/gcm-calibrate-main.c:1162
+#: ../src/gcm-calibrate-main.c:1177
 msgid "Color target files are needed to convert the image to a color profile."
 msgstr "Målfargefiler trenges for å konvertere bildet til fargeprofil"
 
 #. TRANSLATORS: dialog message, asking if it's okay to install them
-#: ../src/gcm-calibrate-main.c:1164
+#: ../src/gcm-calibrate-main.c:1179
 msgid "Do you want them to be installed?"
 msgstr "Vil du installere dem?"
 
 #. TRANSLATORS: dialog message, if the user has the target file on a CDROM then there's no need for this 
package
-#: ../src/gcm-calibrate-main.c:1166
+#: ../src/gcm-calibrate-main.c:1181
 msgid "If you already have the correct file, you can skip this step."
 msgstr "Du har allerede den riktige filen så du kan hoppe over dette steget."
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1169
+#: ../src/gcm-calibrate-main.c:1184
 msgid "Optional data files available"
 msgstr "Valgfrie datafiler tilgjengelig"
 
-#: ../src/gcm-calibrate-main.c:1178
+#: ../src/gcm-calibrate-main.c:1193
 msgid "Install Now"
 msgstr "Installer nå"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1189
+#: ../src/gcm-calibrate-main.c:1204
 msgid "Install Targets"
 msgstr "Installer mål"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1209
+#: ../src/gcm-calibrate-main.c:1224
 msgid "CMP Digital Target 3"
 msgstr "CMP Digital Target 3"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1213
+#: ../src/gcm-calibrate-main.c:1228
 msgid "CMP DT 003"
 msgstr "CMP DT 003"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1217
+#: ../src/gcm-calibrate-main.c:1232
 msgid "Color Checker"
 msgstr "Color Checker"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1221
+#: ../src/gcm-calibrate-main.c:1236
 msgid "Color Checker DC"
 msgstr "Color Checker DC"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1225
+#: ../src/gcm-calibrate-main.c:1240
 msgid "Color Checker SG"
 msgstr "Color Checker SG"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1229
+#: ../src/gcm-calibrate-main.c:1244
 msgid "Hutchcolor"
 msgstr "Hutchcolor"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1233
+#: ../src/gcm-calibrate-main.c:1248
 msgid "i1 RGB Scan 1.4"
 msgstr "i1 RGB Scan 1.4"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1237
+#: ../src/gcm-calibrate-main.c:1252
 msgid "IT8.7/2"
 msgstr "IT8.7/2"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1241
+#: ../src/gcm-calibrate-main.c:1256
 msgid "Laser Soft DC Pro"
 msgstr "Laser Soft DC Pro"
 
 #. TRANSLATORS: this is probably a brand name
-#: ../src/gcm-calibrate-main.c:1245
+#: ../src/gcm-calibrate-main.c:1260
 msgid "QPcard 201"
 msgstr "QPcard 201"
 
 #. TRANSLATORS: dialog message, preface. A calibration target looks like
 #. * this: http://www.colorreference.de/targets/target.jpg
-#: ../src/gcm-calibrate-main.c:1323
+#: ../src/gcm-calibrate-main.c:1338
 msgid ""
 "Before profiling the device, you have to manually capture an image of a "
 "calibration target and save it as a TIFF image file."
@@ -930,7 +937,7 @@ msgstr ""
 "en TIFF-bildefil."
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:1328
+#: ../src/gcm-calibrate-main.c:1343
 msgid ""
 "Ensure that the contrast and brightness are not changed and color correction "
 "profiles have not been applied."
@@ -939,7 +946,7 @@ msgstr ""
 "fargerettelse ikke er tatt i bruk."
 
 #. TRANSLATORS: dialog message, suffix
-#: ../src/gcm-calibrate-main.c:1331
+#: ../src/gcm-calibrate-main.c:1346
 msgid ""
 "The device sensor should have been cleaned prior to scanning and the output "
 "file resolution should be at least 200dpi."
@@ -948,7 +955,7 @@ msgstr ""
 "minst 200 dpi."
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:1337
+#: ../src/gcm-calibrate-main.c:1352
 msgid ""
 "Ensure that the white-balance has not been modified by the camera and that "
 "the lens is clean."
@@ -956,95 +963,95 @@ msgstr ""
 "Påse at hvitbalansen ikke har blitt endret av kameraet og at linsen er ren."
 
 #. TRANSLATORS: this is the message body for the chart selection
-#: ../src/gcm-calibrate-main.c:1341
+#: ../src/gcm-calibrate-main.c:1356
 msgid "Please select the calibration target type."
 msgstr "Vennligst velg et mål for kalibrering."
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1344
+#: ../src/gcm-calibrate-main.c:1359
 msgid "What target type do you have?"
 msgstr "Hvilken måltype har du?"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1376
+#: ../src/gcm-calibrate-main.c:1391
 msgid "Select Target"
 msgstr "Velg mål"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1415
+#: ../src/gcm-calibrate-main.c:1430
 msgid "Choose your display type"
 msgstr "Velg din skjermtype"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1422
+#: ../src/gcm-calibrate-main.c:1437
 msgid "Select the monitor type that is attached to your computer."
 msgstr "Velg type skjerm som er koblet til din datamaskin."
 
-#: ../src/gcm-calibrate-main.c:1424
+#: ../src/gcm-calibrate-main.c:1439
 msgid "LCD"
 msgstr "LCD"
 
-#: ../src/gcm-calibrate-main.c:1433
+#: ../src/gcm-calibrate-main.c:1448
 msgid "CRT"
 msgstr "CRT"
 
-#: ../src/gcm-calibrate-main.c:1442
+#: ../src/gcm-calibrate-main.c:1457
 msgid "Plasma"
 msgstr "Plasma"
 
-#: ../src/gcm-calibrate-main.c:1451
+#: ../src/gcm-calibrate-main.c:1466
 msgid "Projector"
 msgstr "Prosjektor"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1463
+#: ../src/gcm-calibrate-main.c:1478
 msgid "Choose Display Type"
 msgstr "Velg type skjerm"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1501
+#: ../src/gcm-calibrate-main.c:1516
 msgid "Choose your display target white point"
 msgstr "Velg mål for hvitpunkt for din skjerm"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1508
+#: ../src/gcm-calibrate-main.c:1523
 msgid ""
 "Most displays should be calibrated to a CIE D65 illuminant for general usage."
 msgstr ""
 "De fleste skjermer bør kalibreres til en CIE D65 lyskilde for vanlig bruk."
 
-#: ../src/gcm-calibrate-main.c:1510
+#: ../src/gcm-calibrate-main.c:1525
 msgid "CIE D50 (Printing and publishing)"
 msgstr "CIE D50 (utskrift og publisering)"
 
-#: ../src/gcm-calibrate-main.c:1519
+#: ../src/gcm-calibrate-main.c:1534
 msgid "CIE D55"
 msgstr "CIE D55"
 
-#: ../src/gcm-calibrate-main.c:1528
+#: ../src/gcm-calibrate-main.c:1543
 msgid "CIE D65 (Photography and graphics)"
 msgstr "CIE D65 (foto og grafikk)"
 
-#: ../src/gcm-calibrate-main.c:1538
+#: ../src/gcm-calibrate-main.c:1553
 msgid "CIE D75"
 msgstr "CIE D75"
 
-#: ../src/gcm-calibrate-main.c:1547
+#: ../src/gcm-calibrate-main.c:1562
 msgid "Native (Already set manually)"
 msgstr "Innebygget (Allerede satt manuelt)"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1559
+#: ../src/gcm-calibrate-main.c:1574
 msgid "Choose Display Whitepoint"
 msgstr "Velg hvitpunkt for skjerm"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1597
+#: ../src/gcm-calibrate-main.c:1612
 msgid "Choose profiling mode"
 msgstr "Velg profileringsmodus"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1604
+#: ../src/gcm-calibrate-main.c:1619
 msgid ""
 "Please indicate if you want to profile a local printer, generate some test "
 "patches, or profile using existing test patches."
@@ -1053,22 +1060,22 @@ msgstr ""
 "eller profilere ved å bruke eksisterende testlapper."
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1641
+#: ../src/gcm-calibrate-main.c:1656
 msgid "Calibration Mode"
 msgstr "Kalibreringsmodus"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1683
+#: ../src/gcm-calibrate-main.c:1698
 msgid "Choose calibration quality"
 msgstr "Velg kvalitet for kalibrering"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1690
+#: ../src/gcm-calibrate-main.c:1705
 msgid "Higher quality calibration requires many color samples and more time."
 msgstr "Kalibrering med høyere kvalitet krever fere fargeprøver og mer tid."
 
 #. TRANSLATORS: this is the message body for the chart selection
-#: ../src/gcm-calibrate-main.c:1694
+#: ../src/gcm-calibrate-main.c:1709
 msgid ""
 "A higher precision profile provides higher accuracy in color matching but "
 "requires more time for reading the color patches."
@@ -1077,36 +1084,36 @@ msgstr ""
 "lenger tid for å lese fargelappene."
 
 #. TRANSLATORS: this is the message body for the chart selection
-#: ../src/gcm-calibrate-main.c:1697
+#: ../src/gcm-calibrate-main.c:1712
 msgid "For a typical workflow, a normal precision profile is sufficient."
 msgstr "Normal presisjon for profil er godt nok for normalt bruk."
 
 #. TRANSLATORS: dialog message, preface
-#: ../src/gcm-calibrate-main.c:1702
+#: ../src/gcm-calibrate-main.c:1717
 msgid "The high precision profile also requires more paper and printer ink."
 msgstr "Høy presisjon for profil krever også mer papir og blekk."
 
 #. TRANSLATORS: radio options for calibration precision
-#: ../src/gcm-calibrate-main.c:1707
+#: ../src/gcm-calibrate-main.c:1722
 msgid "Accurate"
 msgstr "Nøyaktig"
 
-#: ../src/gcm-calibrate-main.c:1708
+#: ../src/gcm-calibrate-main.c:1723
 msgid "Normal"
 msgstr "Normal"
 
-#: ../src/gcm-calibrate-main.c:1709
+#: ../src/gcm-calibrate-main.c:1724
 msgid "Quick"
 msgstr "Rask"
 
-#: ../src/gcm-calibrate-main.c:1716
+#: ../src/gcm-calibrate-main.c:1731
 #, c-format
 msgid "(about %i sheet of paper)"
 msgid_plural "(about %i sheets of paper)"
 msgstr[0] "(omtrent %i papirark)"
 msgstr[1] "(omtrent %i papirark)"
 
-#: ../src/gcm-calibrate-main.c:1727
+#: ../src/gcm-calibrate-main.c:1742
 #, c-format
 msgid "(about %i minute)"
 msgid_plural "(about %i minutes)"
@@ -1114,84 +1121,84 @@ msgstr[0] "(omtrent %i minutt)"
 msgstr[1] "(omtrent %i minutter)"
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1768
+#: ../src/gcm-calibrate-main.c:1783
 msgid "Calibration Quality"
 msgstr "Kvalitet for kalibrering"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1804
+#: ../src/gcm-calibrate-main.c:1819
 msgid "Profile title"
 msgstr "Tittel på profil"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1811
+#: ../src/gcm-calibrate-main.c:1826
 msgid "Choose a title to identify the profile on your system."
 msgstr "Velg en tittel for å identifisere profilen på ditt system."
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1832
+#: ../src/gcm-calibrate-main.c:1847
 msgid "Profile Title"
 msgstr "Tittel på profil"
 
 #. TRANSLATORS: this is the page title
-#: ../src/gcm-calibrate-main.c:1854
+#: ../src/gcm-calibrate-main.c:1869
 msgid "Insert sensor hardware"
 msgstr "Sett inn maskinvare for måling"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1861
+#: ../src/gcm-calibrate-main.c:1876
 msgid "You need to insert sensor hardware to continue."
 msgstr "Du må sette inn måleinstrumentet for å fortsette."
 
 #. TRANSLATORS: this is the calibration wizard page title
-#: ../src/gcm-calibrate-main.c:1867
+#: ../src/gcm-calibrate-main.c:1882
 msgid "Sensor Check"
 msgstr "Sjekk for måleinstrument"
 
 #. TRANSLATORS: this is intro page text
-#: ../src/gcm-calibrate-main.c:1896
+#: ../src/gcm-calibrate-main.c:1911
 msgid "The device could not be found. Ensure it is plugged in and turned on."
 msgstr "Enheten ble ikke funnet. Sjekk at den er koblet til og slått på."
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2163
+#: ../src/gcm-calibrate-main.c:2178
 msgid "Unknown serial"
 msgstr "Ukjent serienummer"
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2168
+#: ../src/gcm-calibrate-main.c:2183
 msgid "Unknown model"
 msgstr "Ukjent modell"
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2173
+#: ../src/gcm-calibrate-main.c:2188
 msgid "Unknown description"
 msgstr "Ukjent beskrivelse"
 
 #. TRANSLATORS: this is saved in the profile
-#: ../src/gcm-calibrate-main.c:2178
+#: ../src/gcm-calibrate-main.c:2193
 msgid "Unknown manufacturer"
 msgstr "Ukjent produsent"
 
 #. TRANSLATORS: this is the copyright string, where it might be
 #. * "Copyright (c) 2009 Edward Scissorhands"
 #. * BIG RED FLASHING NOTE: YOU NEED TO USE ASCII ONLY
-#: ../src/gcm-calibrate-main.c:2185
+#: ../src/gcm-calibrate-main.c:2200
 msgid "Copyright (c)"
 msgstr "Opphavsrett ©"
 
 #. TRANSLATORS: we can make this modal (stay on top of) another window
-#: ../src/gcm-calibrate-main.c:2303 ../src/gcm-picker.c:791
+#: ../src/gcm-calibrate-main.c:2318 ../src/gcm-picker.c:791
 #: ../src/gcm-viewer.c:1819
 msgid "Set the parent window to make this modal"
 msgstr "Sett opphavsvindu for å gjøre dette modalt"
 
 #. TRANSLATORS: show just the one profile, rather than all
-#: ../src/gcm-calibrate-main.c:2306
+#: ../src/gcm-calibrate-main.c:2321
 msgid "Set the specific device to calibrate"
 msgstr "Sett spesifikk enhet som skal kalibreres"
 
-#: ../src/gcm-calibrate-main.c:2347
+#: ../src/gcm-calibrate-main.c:2362
 msgid "No device was specified!"
 msgstr "Enhet ble ikke oppgitt!"
 
@@ -1294,7 +1301,7 @@ msgid "Import color profile?"
 msgstr "Importer fargeprofil?"
 
 #. TRANSLATORS: button text
-#: ../src/gcm-import.c:267 ../src/gcm-viewer.c:450
+#: ../src/gcm-import.c:267
 msgid "Import"
 msgstr "Importer"
 
@@ -1439,6 +1446,10 @@ msgstr "Er du sikker på at du vil fjerne denne profilen fra systemet for godt?"
 msgid "Delete"
 msgstr "Slett"
 
+#: ../src/gcm-viewer.c:450
+msgid "_Import"
+msgstr "_Importer"
+
 #. TRANSLATORS: filter name on the file->open dialog
 #: ../src/gcm-viewer.c:468
 msgid "Supported ICC profiles"
@@ -1695,7 +1706,7 @@ msgstr "Hvit er ikke D50 hvit"
 #. TRANSLATORS: the profile is broken
 #: ../src/gcm-viewer.c:966
 msgid "The whitepoint temperature is unlikely"
-msgstr ""
+msgstr "Temperatur for hvitpunkt er usannsynlig"
 
 #. TRANSLATORS: the profile is broken
 #: ../src/gcm-viewer.c:970
[Date Prev][Date Next] [Thread Prev][Thread Next] [Thread Index] [Date Index] [Author Index]