GNOME.org
 

[gnoduino: 153/237] Makefile modification to allow building optiboot in more environments. Allows building within the Ar

commit bbafeaf1d029a4f11f1bcaf476df638afcbafe7b
Author: WestfW <westfw gmail com>
Date:   Thu Jun 9 22:36:05 2011 -0700

    Makefile modification to allow building optiboot in more environments.
    Allows building within the Arduino Source tree, and within the Arduino
    IDE tree, as well as using CrossPack on Mac.
    
    Adds README.TXT to track arduino-specific changes (and documents the
    new build options.)
    
    This addresses Arduino issue:
    
      http://code.google.com/p/arduino/issues/detail?id=487
    
    And optiboot issue
    
      http://code.google.com/p/optiboot/issues/detail?id=1
    
    (which can be thought of as a subset of the Arduno issue.)
    
    Note that the binaries produced after these Makefile changes (using any
    of the compile environments) are identical to those produced by the
    crosspack-20100115 environment on a Mac.
    (cherry picked from commit 2d2ed324b48e709f59a002cb274ed60bb0ebc911)

 arduino/bootloaders/optiboot/Makefile              |   77 ++++++++++++++++++--
 arduino/bootloaders/optiboot/README.TXT            |   55 ++++++++++++++
 arduino/bootloaders/optiboot/omake                 |    2 +
 arduino/bootloaders/optiboot/omake.bat             |    1 +
 .../bootloaders/optiboot/optiboot_atmega328.lst    |   22 +++---
 5 files changed, 138 insertions(+), 19 deletions(-)
---
diff --git a/arduino/bootloaders/optiboot/Makefile b/arduino/bootloaders/optiboot/Makefile
index 0fd6005..92f9c61 100644
--- a/arduino/bootloaders/optiboot/Makefile
+++ b/arduino/bootloaders/optiboot/Makefile
@@ -19,6 +19,17 @@
 # program name should not be changed...
 PROGRAM    = optiboot
 
+# The default behavior is to build using tools that are in the users
+# current path variables, but we can also build using an installed
+# Arduino user IDE setup, or the Arduino source tree.
+# Uncomment this next lines to build within the arduino environment,
+# using the arduino-included avrgcc toolset (mac and pc)
+# ENV ?= arduino
+# ENV ?= arduinodev
+# OS ?= macosx
+# OS ?= windows
+
+
 # enter the parameters for the avrdude isp tool
 ISPTOOL	   = stk500v2
 ISPPORT	   = usb
@@ -27,6 +38,50 @@ ISPSPEED   = -b 115200
 MCU_TARGET = atmega168
 LDSECTION  = --section-start=.text=0x3e00
 
+# Build environments
+# Start of some ugly makefile-isms to allow optiboot to be built
+# in several different environments.  See the README.TXT file for
+# details.
+
+# default
+fixpath = $(1)
+
+ifeq ($(ENV), arduino)
+# For Arduino, we assume that we're connected to the optiboot directory
+# included with the arduino distribution, which means that the full set
+# of avr-tools are "right up there" in standard places.
+TOOLROOT = ../../../tools
+GCCROOT = $(TOOLROOT)/avr/bin/
+AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
+
+ifeq ($(OS), windows)
+# On windows, SOME of the tool paths will need to have backslashes instead
+# of forward slashes (because they use windows cmd.exe for execution instead
+# of a unix/mingw shell?)
+fixpath = $(subst /,\,$1)
+endif
+
+else ifeq ($(ENV), arduinodev)
+# Arduino IDE source code environment.  Use the unpacked compilers created
+# by the build (you'll need to do "ant build" first.)
+ifeq ($(OS), macosx)
+TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools
+endif
+ifeq ($(OS), windows)
+TOOLROOT = ../../../../build/windows/work/hardware/tools
+endif
+
+GCCROOT = $(TOOLROOT)/avr/bin/
+AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf
+
+else
+GCCROOT =
+AVRDUDE_CONF =
+endif
+#
+# End of build environment code.
+
+
 # the efuse should really be 0xf8; since, however, only the lower
 # three bits of that byte are used on the atmega168, avrdude gets
 # confused if you specify 1's for the higher bits, see:
@@ -37,10 +92,13 @@ LDSECTION  = --section-start=.text=0x3e00
 # lock it), but since the high two bits of the lock byte are
 # unused, avrdude would get confused.
 
-ISPFUSES    = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
--e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
-ISPFLASH    = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
--U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
+ISPFUSES    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
+              -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+              -e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \
+              -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
+ISPFLASH    = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \
+              -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
+              -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
 
 STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
 STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
@@ -53,15 +111,17 @@ OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls
 DEFS       = 
 LIBS       =
 
-CC         = avr-gcc
+CC         = $(GCCROOT)avr-gcc
 
 # Override is only needed by avr-lib build system.
 
 override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
-override LDFLAGS       = -Wl,$(LDSECTION) -Wl,--relax -nostartfiles
+override LDFLAGS       = -Wl,$(LDSECTION) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib
+
+OBJCOPY        = $(GCCROOT)avr-objcopy
+OBJDUMP        = $(call fixpath,$(GCCROOT)avr-objdump)
 
-OBJCOPY        = avr-objcopy
-OBJDUMP        = avr-objdump
+SIZE           = $(GCCROOT)avr-size
 
 # 20MHz clocked platforms
 #
@@ -222,6 +282,7 @@ isp-stk500: $(PROGRAM)_$(TARGET).hex
 
 %.elf: $(OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+	$(SIZE) $@
 
 clean:
 	rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
diff --git a/arduino/bootloaders/optiboot/README.TXT b/arduino/bootloaders/optiboot/README.TXT
new file mode 100644
index 0000000..9a68e23
--- /dev/null
+++ b/arduino/bootloaders/optiboot/README.TXT
@@ -0,0 +1,55 @@
+This directory contains the Optiboot small bootloader for AVR
+microcontrollers, somewhat modified specifically for the Arduino
+environment.
+
+Optiboot is more fully described here: http://code.google.com/p/optiboot/
+and is the work of Peter Knight (aka Cathedrow), building on work of Jason P
+Kyle, Spiff, and Ladyada.  Arduino-specific modification are by Bill
+Westfield (aka WestfW)
+
+Arduino-specific issues are tracked as part of the Arduino project
+at http://code.google.com/p/arduino
+
+
+------------------------------------------------------------
+Building optiboot for Arduino.
+
+Production builds of optiboot for Arduino are done on a Mac in "unix mode"
+using CrossPack-AVR-20100115.  CrossPack tracks WINAVR (for windows), which
+is just a package of avr-gcc and related utilities, so similar builds should
+work on Windows or Linux systems.
+
+One of the Arduino-specific changes is modifications to the makefile to
+allow building optiboot using only the tools installed as part of the
+Arduino environment, or the Arduino source development tree.  All three
+build procedures should yield identical binaries (.hex files) (although
+this may change if compiler versions drift apart between CrossPack and
+the Arduino IDE.)
+
+
+Building optiboot in the arduino IDE install.
+
+Work in the .../hardware/arduino/bootloaders/optiboot/ and use the
+"omake <targets>" command, which just generates a command that uses
+the arduino-included "make" utility with a command like:
+    make OS=windows ENV=arduino <targets>
+or  make OS=macosx ENV=arduino <targets>
+On windows, this assumes you're using the windows command shell.  If
+you're using a cygwin or mingw shell, or have one of those in your
+path, the build will probably break due to slash vs backslash issues.
+On a Mac, if you have the developer tools installed, you can use the
+Apple-supplied version of make.
+The makefile uses relative paths ("../../../tools/" and such) to find
+the programs it needs, so you need to work in the existing optiboot
+directory (or something created at the same "level") for it to work.
+
+
+Building optiboot in the arduino source development install.
+
+In this case, there is no special shell script, and you're assumed to
+have "make" installed somewhere in your path.
+Build the Arduino source ("ant build") to unpack the tools into the
+expected directory.
+Work in Arduino/hardware/arduino/bootloaders/optiboot and use
+    make OS=windows ENV=arduinodev <targets>
+or  make OS=macosx ENV=arduinodev <targets>
diff --git a/arduino/bootloaders/optiboot/omake b/arduino/bootloaders/optiboot/omake
new file mode 100644
index 0000000..cc7c6bc
--- /dev/null
+++ b/arduino/bootloaders/optiboot/omake
@@ -0,0 +1,2 @@
+echo ../../../tools/avr/bin/make OS=macosx ENV=arduino $*
+../../../tools/avr/bin/make OS=macosx ENV=arduino $*
diff --git a/arduino/bootloaders/optiboot/omake.bat b/arduino/bootloaders/optiboot/omake.bat
new file mode 100644
index 0000000..f6815da
--- /dev/null
+++ b/arduino/bootloaders/optiboot/omake.bat
@@ -0,0 +1 @@
+..\..\..\tools\avr\utils\bin\make OS=windows ENV=arduino %*
diff --git a/arduino/bootloaders/optiboot/optiboot_atmega328.lst b/arduino/bootloaders/optiboot/optiboot_atmega328.lst
index dd879dc..104799f 100644
--- a/arduino/bootloaders/optiboot/optiboot_atmega328.lst
+++ b/arduino/bootloaders/optiboot/optiboot_atmega328.lst
@@ -13,15 +13,15 @@ Idx Name          Size      VMA       LMA       File off  Algn
                   CONTENTS, READONLY, DEBUGGING
   4 .debug_abbrev 00000196  00000000  00000000  0000053d  2**0
                   CONTENTS, READONLY, DEBUGGING
-  5 .debug_line   000003db  00000000  00000000  000006d3  2**0
+  5 .debug_line   0000043f  00000000  00000000  000006d3  2**0
                   CONTENTS, READONLY, DEBUGGING
-  6 .debug_frame  00000090  00000000  00000000  00000ab0  2**2
+  6 .debug_frame  00000090  00000000  00000000  00000b14  2**2
                   CONTENTS, READONLY, DEBUGGING
-  7 .debug_str    00000124  00000000  00000000  00000b40  2**0
+  7 .debug_str    00000136  00000000  00000000  00000ba4  2**0
                   CONTENTS, READONLY, DEBUGGING
-  8 .debug_loc    000001d1  00000000  00000000  00000c64  2**0
+  8 .debug_loc    000001d1  00000000  00000000  00000cda  2**0
                   CONTENTS, READONLY, DEBUGGING
-  9 .debug_ranges 00000068  00000000  00000000  00000e35  2**0
+  9 .debug_ranges 00000068  00000000  00000000  00000eab  2**0
                   CONTENTS, READONLY, DEBUGGING
 
 Disassembly of section .text:
@@ -153,7 +153,7 @@ void watchdogReset() {
       // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
       getNch(1);
     7e5e:	81 e0       	ldi	r24, 0x01	; 1
-    7e60:	be d0       	rcall	.+380    	; 0x7fde <verifySpace+0xc>
+    7e60:	be d0       	rcall	.+380    	; 0x7fde <getNch>
       putch(0x03);
     7e62:	83 e0       	ldi	r24, 0x03	; 3
     7e64:	24 c0       	rjmp	.+72     	; 0x7eae <main+0xae>
@@ -172,7 +172,7 @@ void watchdogReset() {
       // SET DEVICE EXT is ignored
       getNch(5);
     7e72:	85 e0       	ldi	r24, 0x05	; 5
-    7e74:	b4 d0       	rcall	.+360    	; 0x7fde <verifySpace+0xc>
+    7e74:	b4 d0       	rcall	.+360    	; 0x7fde <getNch>
     7e76:	8a c0       	rjmp	.+276    	; 0x7f8c <main+0x18c>
     }
     else if(ch == STK_LOAD_ADDRESS) {
@@ -206,7 +206,7 @@ void watchdogReset() {
       // UNIVERSAL command is ignored
       getNch(4);
     7ea8:	84 e0       	ldi	r24, 0x04	; 4
-    7eaa:	99 d0       	rcall	.+306    	; 0x7fde <verifySpace+0xc>
+    7eaa:	99 d0       	rcall	.+306    	; 0x7fde <getNch>
       putch(0x00);
     7eac:	80 e0       	ldi	r24, 0x00	; 0
     7eae:	71 d0       	rcall	.+226    	; 0x7f92 <putch>
@@ -503,6 +503,8 @@ void verifySpace() {
     7fda:	84 e1       	ldi	r24, 0x14	; 20
 }
     7fdc:	da cf       	rjmp	.-76     	; 0x7f92 <putch>
+
+00007fde <getNch>:
     ::[count] "M" (UART_B_VALUE)
   );
 }
@@ -511,12 +513,10 @@ void verifySpace() {
 void getNch(uint8_t count) {
     7fde:	1f 93       	push	r17
     7fe0:	18 2f       	mov	r17, r24
-
-00007fe2 <getNch>:
   do getch(); while (--count);
     7fe2:	df df       	rcall	.-66     	; 0x7fa2 <getch>
     7fe4:	11 50       	subi	r17, 0x01	; 1
-    7fe6:	e9 f7       	brne	.-6      	; 0x7fe2 <getNch>
+    7fe6:	e9 f7       	brne	.-6      	; 0x7fe2 <getNch+0x4>
   verifySpace();
     7fe8:	f4 df       	rcall	.-24     	; 0x7fd2 <verifySpace>
 }
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]