[gdk-pixbuf] autogen.sh: Use autoreconf



commit 3feebdc857f73495f19316958b1ded3b4b12e7d9
Author: Javier Jardón <javier jardon codethink co uk>
Date:   Fri Feb 11 17:25:00 2011 +0000

    autogen.sh: Use autoreconf

 Makefile.am |    2 +-
 autogen.sh  |  134 ++++++++---------------------------------------------------
 2 files changed, 19 insertions(+), 117 deletions(-)
---
diff --git a/Makefile.am b/Makefile.am
index 43c13db..9d68753 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -7,7 +7,7 @@ EXTRA_DIST += config.h.win32
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = gdk-pixbuf-2.0.pc
 
-ACLOCAL_AMFLAGS = -I m4
+ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
 
 DISTCLEANFILES = 		\
 	gdk-pixbuf-2.0.pc
diff --git a/autogen.sh b/autogen.sh
index 0fb8411..4a373e9 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -1,130 +1,32 @@
 #!/bin/sh
 # Run this to generate all the initial makefiles, etc.
 
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
+test -n "$srcdir" || srcdir=`dirname "$0"`
+test -n "$srcdir" || srcdir=.
 
-ORIGDIR=`pwd`
-cd $srcdir
-PROJECT=gdk-pixbuf
-TEST_TYPE=-f
-FILE=gdk-pixbuf/gdk-pixbuf.h
+olddir=`pwd`
+cd "$srcdir"
 
-DIE=0
-
-have_libtool=false
-if libtoolize --version < /dev/null > /dev/null 2>&1 ; then
-	libtool_version=`libtoolize --version |
-			 head -1 |
-			 sed -e 's/^\(.*\)([^)]*)\(.*\)$/\1\2/g' \
-			     -e 's/^[^0-9]*\([0-9.][0-9.]*\).*/\1/'`
-	case $libtool_version in
-	    2.*)
-		have_libtool=true
-		;;
-	esac
-fi
-if $have_libtool ; then : ; else
-	echo
-	echo "You must have libtool 2.2 installed to compile $PROJECT."
-	echo "Install the appropriate package for your distribution,"
-	echo "or get the source tarball at http://ftp.gnu.org/gnu/libtool/";
-	DIE=1
-fi
-
-(gtkdocize --version) < /dev/null > /dev/null 2>&1 || {
-	echo
-	echo "You must have gtk-doc installed to compile $PROJECT."
-	echo "Install the appropriate package for your distribution,"
-	echo "or get the source tarball at http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/";
-	DIE=1
-}
-
-(autoconf --version) < /dev/null > /dev/null 2>&1 || {
-	echo
-	echo "You must have autoconf installed to compile $PROJECT."
-	echo "Install the appropriate package for your distribution,"
-	echo "or get the source tarball at http://ftp.gnu.org/gnu/autoconf/";
-	DIE=1
-}
-
-if automake-1.11 --version < /dev/null > /dev/null 2>&1 ; then
-    AUTOMAKE=automake-1.11
-    ACLOCAL=aclocal-1.11
-else if automake-1.10 --version < /dev/null > /dev/null 2>&1 ; then
-    AUTOMAKE=automake-1.10
-    ACLOCAL=aclocal-1.10
+GTKDOCIZE=`which gtkdocize`
+if test -z $GTKDOCIZE; then
+        echo "*** No GTK-Doc found, please install it ***"
+        exit 1
 else
-	echo
-	echo "You must have automake 1,10.x or 1.11.x installed to compile $PROJECT."
-	echo "Install the appropriate package for your distribution,"
-	echo "or get the source tarball at http://ftp.gnu.org/gnu/automake/";
-	DIE=1
-fi
-fi
-
-if test "$DIE" -eq 1; then
-	exit 1
-fi
-
-test $TEST_TYPE $FILE || {
-	echo "You must run this script in the top-level $PROJECT directory"
-	exit 1
-}
-
-# NOCONFIGURE is used by gnome-common; support both
-if ! test -z "$AUTOGEN_SUBDIR_MODE"; then
-    NOCONFIGURE=1
-fi
-
-if test -z "$NOCONFIGURE"; then
-        if test -z "$*"; then
-                echo "I am going to run ./configure with no arguments - if you wish "
-                echo "to pass any to it, please specify them on the $0 command line."
-        fi
+        gtkdocize || exit $?
 fi
 
-if test -z "$ACLOCAL_FLAGS"; then
-
-	acdir=`$ACLOCAL --print-ac-dir`
-        m4list="glib-2.0.m4 glib-gettext.m4"
-
-	for file in $m4list
-	do
-		if [ ! -f "$acdir/$file" ]; then
-			echo "WARNING: aclocal's directory is $acdir, but..."
-			echo "         no file $acdir/$file"
-			echo "         You may see fatal macro warnings below."
-			echo "         If these files are installed in /some/dir, set the ACLOCAL_FLAGS "
-			echo "         environment variable to \"-I /some/dir\", or install"
-			echo "         $acdir/$file."
-			echo ""
-		fi
-	done
-fi
-
-rm -rf autom4te.cache
-
 # README and INSTALL are required by automake, but may be deleted by clean
 # up rules. to get automake to work, simply touch these here, they will be
 # regenerated from their corresponding *.in files by ./configure anyway.
 touch README INSTALL
 
-autopoint --force || exit $?
-gtkdocize || exit $?
-
-$ACLOCAL -I m4 $ACLOCAL_FLAGS || exit $?
-
-libtoolize --force || exit $?
-autoheader || exit $?
-
-$AUTOMAKE --add-missing || exit $?
-autoconf || exit $?
-cd $ORIGDIR || exit $?
-
-if test -z "$NOCONFIGURE"; then
-        $srcdir/configure --enable-maintainer-mode $AUTOGEN_CONFIGURE_ARGS "$@" || exit $?
-
-        echo 
-        echo "Now type 'make' to compile $PROJECT."
+AUTORECONF=`which autoreconf`
+if test -z $AUTORECONF; then
+        echo "*** No autoreconf found, please install it ***"
+        exit 1
+else
+        autoreconf --force --install --verbose || exit $?
 fi
+
+cd "$olddir"
+test -n "$NOCONFIGURE" || "$srcdir/configure" "$@"



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]