[gthumb/gthumb-2-10] fixed "dist check" issues



commit 4714ca164ccfc1cb517ede85666b13590365aef4
Author: Paolo Bacchilega <paobac src gnome org>
Date:   Wed May 5 12:42:32 2010 +0200

    fixed "dist check" issues

 INSTALL               |  254 +++++++++++++++++++++++++++++++++++++------------
 data/Makefile.am      |   28 +++++-
 libgthumb/Makefile.am |    4 +
 po/POTFILES.skip      |    1 +
 4 files changed, 224 insertions(+), 63 deletions(-)
---
diff --git a/INSTALL b/INSTALL
index 095b1eb..7d1c323 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,16 +1,25 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
-Software Foundation, Inc.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
 
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
 
 Basic Installation
 ==================
 
-These are generic installation instructions.
+   Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -23,9 +32,9 @@ debugging `configure').
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -35,30 +44,37 @@ some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
-The simplest way to compile this package is:
+   The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
   3. Optionally, type `make check' to run any self-tests that come with
-     the package.
+     the package, generally using the just-built uninstalled binaries.
 
   4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
+
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the
      files that `configure' created (so you can compile the package for
      a different kind of computer), type `make distclean'.  There is
@@ -67,65 +83,120 @@ The simplest way to compile this package is:
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
+
 Compilers and Options
 =====================
 
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
-You can compile the package for more than one kind of computer at the
+   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
 
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
+   By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
 options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
 
    If the package supports it, you can cause programs to be installed
 with an extra prefix or suffix on their names by giving `configure' the
 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
+   Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -137,14 +208,53 @@ find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
 Specifying the System Type
 ==========================
 
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -152,14 +262,15 @@ type, such as `sun4', or a canonical name which has the form:
 
 where SYSTEM can have one of these forms:
 
-     OS KERNEL-OS
+     OS
+     KERNEL-OS
 
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -170,9 +281,9 @@ eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -181,7 +292,7 @@ A warning: not all `configure' scripts look for a site script.
 Defining Variables
 ==================
 
-Variables not defined in a site shell script can be set in the
+   Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -189,17 +300,30 @@ them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
 `configure' Invocation
 ======================
 
-`configure' recognizes the following options to control how it operates.
+   `configure' recognizes the following options to control how it
+operates.
 
 `--help'
 `-h'
-     Print a summary of the options to `configure', and exit.
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
 
 `--version'
 `-V'
@@ -226,6 +350,16 @@ overridden in the site shell script).
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.
 
diff --git a/data/Makefile.am b/data/Makefile.am
index 2173eb4..5b22c87 100644
--- a/data/Makefile.am
+++ b/data/Makefile.am
@@ -1,5 +1,8 @@
 SUBDIRS = albumthemes glade
 
+install-data-local: install-schemas update-icon-cache
+uninstall-local: uninstall-schemas
+
 @INTLTOOL_DESKTOP_RULE@
 
 desktopdir = $(datadir)/applications
@@ -34,9 +37,28 @@ schema_DATA = $(schema_in_files:.schemas.in=.schemas)
 serverdir = $(libdir)/bonobo/servers
 server_DATA = GNOME_GThumb.server
 
+install-schemas: $(schema_DATA)
+if GCONF_SCHEMAS_INSTALL
+	if test -z "$(DESTDIR)" ; then \
+	for p in $^ ; do \
+		GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) \
+			$(GCONFTOOL) \
+			--makefile-install-rule \
+			$(top_builddir)/data/$$p; \
+	done \
+	fi
+endif
+
+uninstall-schemas: $(schema_DATA)
 if GCONF_SCHEMAS_INSTALL
-install-data-local:
-	GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(top_builddir)/data/$(schema_DATA)
+	if test -z "$(DESTDIR)" ; then \
+	for p in $^ ; do \
+		GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) \
+			$(GCONFTOOL) \
+			--makefile-uninstall-rule \
+			$(top_builddir)/data/$$p; \
+	done \
+	fi
 endif
 
 EXTRA_DIST = 			\
@@ -48,7 +70,7 @@ EXTRA_DIST = 			\
 	$(man_MANS)		\
 	$(server_DATA)
 
-DISTCLEANFILES =                \
+DISTCLEANFILES =               	\
 	$(schema_DATA)		\
 	$(desktop_DATA)
 
diff --git a/libgthumb/Makefile.am b/libgthumb/Makefile.am
index a97d75f..6563e5e 100644
--- a/libgthumb/Makefile.am
+++ b/libgthumb/Makefile.am
@@ -171,7 +171,11 @@ gthumb-enum-types.c: $(HEADER_FILES) gthumb-enum-types.h
 	&& (cmp -s xgen-$(@F) gthumb-enum-types.c || cp xgen-$(@F) gthumb-enum-types.c ) \
         && rm -f xgen-$(@F)
 
+BUILT_SOURCES = $(MARSHALLERS) $(ENUM_TYPES)
 CLEANFILES = $(MARSHALLERS) $(ENUMS)
 EXTRA_DIST = gthumb-marshal.list
 
+dist-hook:
+	cd $(distdir); rm -f $(CLEANFILES)
+
 -include $(top_srcdir)/git.mk
diff --git a/po/POTFILES.skip b/po/POTFILES.skip
index 9839afe..76dfb0c 100644
--- a/po/POTFILES.skip
+++ b/po/POTFILES.skip
@@ -1,2 +1,3 @@
 # List of source files that should NOT be translated.
 # Please keep this file sorted alphabetically.
+data/gthumb-import.desktop.in



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]