gcompris r3476 - in branches/gcomprixogoo: . boards/dataset docs/C src src/gcompris
- From: bcoudoin svn gnome org
- To: svn-commits-list gnome org
- Subject: gcompris r3476 - in branches/gcomprixogoo: . boards/dataset docs/C src src/gcompris
- Date: Wed, 30 Jul 2008 23:37:49 +0000 (UTC)
Author: bcoudoin
Date: Wed Jul 30 23:37:49 2008
New Revision: 3476
URL: http://svn.gnome.org/viewvc/gcompris?rev=3476&view=rev
Log:
improved image selector
Modified:
branches/gcomprixogoo/boards/dataset/misc.xml
branches/gcomprixogoo/docs/C/texinfo.tex
branches/gcomprixogoo/install-sh
branches/gcomprixogoo/src/gcompris/file_selector.c
branches/gcomprixogoo/src/gcompris/images_selector.c
branches/gcomprixogoo/src/runit.sh
Modified: branches/gcomprixogoo/boards/dataset/misc.xml
==============================================================================
--- branches/gcomprixogoo/boards/dataset/misc.xml (original)
+++ branches/gcomprixogoo/boards/dataset/misc.xml Wed Jul 30 23:37:49 2008
@@ -1,19 +1,19 @@
<?xml version="1.0" encoding="UTF-8"?>
<ImageSetRoot>
- <ImageSet filename="gcompris/misc/car.png">
- <Image filename="gcompris/misc/car.png"/>
+ <ImageSet filename="imageid/car.png">
+ <Image filename="babymatch/car.png"/>
<Image filename="imageid/car.png"/>
- <Image filename="gcompris/misc/minivan.png"/>
- <Image filename="gcompris/misc/truck.png"/>
- <Image filename="gcompris/misc/bicycle.png"/>
- <Image filename="gcompris/misc/tuxboat.png"/>
- <Image filename="gcompris/misc/fishingboat.png"/>
- <Image filename="gcompris/misc/sailingboat.png"/>
- <Image filename="gcompris/misc/fusee.png"/>
- <Image filename="gcompris/misc/tuxhelico.png"/>
- <Image filename="gcompris/misc/tuxballoon.png"/>
- <Image filename="gcompris/misc/tuxloco.png"/>
- <Image filename="gcompris/misc/tuxplane.png"/>
+ <Image filename="babymatch/minivan.png"/>
+ <Image filename="babymatch/truck.png"/>
+ <Image filename="babymatch/bicycle.png"/>
+ <Image filename="canal_lock/tuxboat.png"/>
+ <Image filename="babymatch/fishingboat.png"/>
+ <Image filename="babymatch/sailingboat.png"/>
+ <Image filename="babymatch/fusee.png"/>
+ <Image filename="babymatch/tuxhelico.png"/>
+ <Image filename="babymatch/tuxballoon.png"/>
+ <Image filename="babymatch/tuxloco.png"/>
+ <Image filename="babymatch/tuxplane.png"/>
<Image filename="imageid/avion.png"/>
<Image filename="railroad/loco5.png"/>
<Image filename="railroad/wagon14.png"/>
@@ -40,66 +40,66 @@
<Image filename="railroad/wagon6.png"/>
<Image filename="images/wagon-green.png"/>
<Image filename="images/wagon-yellow.png"/>
- <Image filename="chronos/images/helico_cornu.png"/>
- <Image filename="chronos/images/wright_flyer.png"/>
- <Image filename="chronos/images/lindbergh.png"/>
- <Image filename="chronos/images/bell_X1.png"/>
- <Image filename="chronos/images/mongolfiere.png"/>
- <Image filename="chronos/images/bleriot.png"/>
- <Image filename="chronos/images/rafale.png"/>
- <Image filename="chronos/images/Eole.png"/>
- <Image filename="chronos/images/celerifere.png"/>
- <Image filename="chronos/images/fardier.png"/>
- <Image filename="chronos/images/st_rocket.png"/>
- <Image filename="chronos/images/1955ds19.png"/>
- <Image filename="chronos/images/benz1885.png"/>
- <Image filename="chronos/images/bolle1878.png"/>
- <Image filename="chronos/images/lancia1923.png"/>
- <Image filename="chronos/images/renault1899.png"/>
+ <Image filename="chronos/helico_cornu.png"/>
+ <Image filename="chronos/wright_flyer.png"/>
+ <Image filename="chronos/lindbergh.png"/>
+ <Image filename="chronos/bell_X1.png"/>
+ <Image filename="chronos/mongolfiere.png"/>
+ <Image filename="chronos/bleriot.png"/>
+ <Image filename="chronos/rafale.png"/>
+ <Image filename="chronos/Eole.png"/>
+ <Image filename="chronos/celerifere.png"/>
+ <Image filename="chronos/fardier.png"/>
+ <Image filename="chronos/st_rocket.png"/>
+ <Image filename="chronos/1955ds19.png"/>
+ <Image filename="chronos/benz1885.png"/>
+ <Image filename="chronos/bolle1878.png"/>
+ <Image filename="chronos/lancia1923.png"/>
+ <Image filename="chronos/renault1899.png"/>
</ImageSet>
- <ImageSet filename="gcompris/misc/house.png">
- <Image filename="gcompris/misc/house.png"/>
+ <ImageSet filename="babymatch/house.png">
+ <Image filename="babymatch/house.png"/>
<Image filename="imageid/maison.png"/>
- <Image filename="gcompris/misc/lighthouse.png"/>
- <Image filename="gcompris/misc/castle.png"/>
- <Image filename="gcompris/misc/crown.png"/>
- <Image filename="gcompris/misc/flowerpot.png"/>
+ <Image filename="babymatch/lighthouse.png"/>
+ <Image filename="babymatch/castle.png"/>
+ <Image filename="babymatch/crown.png"/>
+ <Image filename="babymatch/flowerpot.png"/>
<Image filename="imageid/bed.png"/>
- <Image filename="gcompris/misc/eggpot.png"/>
- <Image filename="gcompris/misc/football.png"/>
+ <Image filename="babymatch/eggpot.png"/>
+ <Image filename="babymatch/football.png"/>
<Image filename="imageid/ballon.png"/>
- <Image filename="gcompris/misc/glass.png"/>
- <Image filename="gcompris/misc/lamp.png"/>
- <Image filename="gcompris/misc/light.png"/>
- <Image filename="gcompris/misc/pencil.png"/>
- <Image filename="gcompris/misc/postcard.png"/>
- <Image filename="gcompris/misc/postpoint.png"/>
- <Image filename="gcompris/misc/rape.png"/>
- <Image filename="gcompris/misc/raquette.png"/>
- <Image filename="gcompris/misc/sofa.png"/>
- <Image filename="gcompris/misc/bottle.png"/>
+ <Image filename="babymatch/glass.png"/>
+ <Image filename="babymatch/lamp.png"/>
+ <Image filename="babymatch/light.png"/>
+ <Image filename="babymatch/pencil.png"/>
+ <Image filename="babymatch/postcard.png"/>
+ <Image filename="babymatch/postpoint.png"/>
+ <Image filename="babymatch/rape.png"/>
+ <Image filename="babymatch/raquette.png"/>
+ <Image filename="babymatch/sofa.png"/>
+ <Image filename="babymatch/bottle.png"/>
<Image filename="imageid/bottle.png"/>
</ImageSet>
- <ImageSet filename="gcompris/misc/tree.png">
- <Image filename="gcompris/misc/cocotier.png"/>
- <Image filename="gcompris/misc/cloud.png"/>
- <Image filename="gcompris/misc/star.png"/>
- <Image filename="gcompris/misc/egg.png"/>
- <Image filename="gcompris/misc/flower.png"/>
- <Image filename="gcompris/misc/sapin.png"/>
- <Image filename="gcompris/misc/tree.png"/>
+ <ImageSet filename="babymatch/tree.png">
+ <Image filename="babymatch/cocotier.png"/>
+ <Image filename="babymatch/cloud.png"/>
+ <Image filename="babymatch/star.png"/>
+ <Image filename="babymatch/egg.png"/>
+ <Image filename="babymatch/flower.png"/>
+ <Image filename="babymatch/sapin.png"/>
+ <Image filename="babymatch/tree.png"/>
<Image filename="imageid/chien.png"/>
<Image filename="imageid/fish.png"/>
<Image filename="images/water_spot.png"/>
</ImageSet>
<ImageSet filename="gcompris/food/grapefruit.png">
- <Image filename="gcompris/misc/apple.png"/>
+ <Image filename="babymatch/apple.png"/>
<Image filename="imageid/pomme.png"/>
- <Image filename="gcompris/misc/peer.png"/>
- <Image filename="gcompris/misc/carot.png"/>
- <Image filename="gcompris/misc/cerise.png"/>
- <Image filename="gcompris/misc/strawberry.png"/>
+ <Image filename="babymatch/peer.png"/>
+ <Image filename="babymatch/carot.png"/>
+ <Image filename="babymatch/cerise.png"/>
+ <Image filename="babymatch/strawberry.png"/>
<Image filename="gcompris/food/baby_bottle.png"/>
<Image filename="gcompris/food/banana.png"/>
<Image filename="imageid/banana.png"/>
@@ -120,17 +120,17 @@
<Image filename="gcompris/food/suggar_box.png"/>
<Image filename="gcompris/food/yahourt.png"/>
</ImageSet>
- <ImageSet filename="gcompris/misc/tux.png">
- <Image filename="gcompris/misc/tuxboat.png"/>
- <Image filename="gcompris/misc/sailingboat.png"/>
- <Image filename="gcompris/misc/tuxhelico.png"/>
- <Image filename="gcompris/misc/tuxballoon.png"/>
- <Image filename="gcompris/misc/tuxloco.png"/>
- <Image filename="gcompris/misc/tuxplane.png"/>
- <Image filename="gcompris/misc/Tux_mute.png"/>
- <Image filename="gcompris/misc/Tux_play.png"/>
- <Image filename="gcompris/misc/tux_top_north.png"/>
- <Image filename="gcompris/misc/tux_top_south.png"/>
+ <ImageSet filename="babymatch/tux.png">
+ <Image filename="babymatch/tuxboat.png"/>
+ <Image filename="babymatch/sailingboat.png"/>
+ <Image filename="babymatch/tuxhelico.png"/>
+ <Image filename="babymatch/tuxballoon.png"/>
+ <Image filename="babymatch/tuxloco.png"/>
+ <Image filename="babymatch/tuxplane.png"/>
+ <Image filename="babymatch/Tux_mute.png"/>
+ <Image filename="babymatch/Tux_play.png"/>
+ <Image filename="babymatch/tux_top_north.png"/>
+ <Image filename="babymatch/tux_top_south.png"/>
<Image filename="images/tux_albert.png"/>
<Image filename="images/tux_graduate.png"/>
<Image filename="images/tux-teacher.png"/>
Modified: branches/gcomprixogoo/docs/C/texinfo.tex
==============================================================================
--- branches/gcomprixogoo/docs/C/texinfo.tex (original)
+++ branches/gcomprixogoo/docs/C/texinfo.tex Wed Jul 30 23:37:49 2008
@@ -3,16 +3,15 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2007-12-02.17}
+\def\texinfoversion{2003-10-06.08}
%
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 2007,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007 Free Software Foundation, Inc.
+% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
%
-% This texinfo.tex file is free software: you can redistribute it and/or
+% This texinfo.tex file is free software; you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation, either version 3 of the
-% License, or (at your option) any later version.
+% published by the Free Software Foundation; either version 2, or (at
+% your option) any later version.
%
% This texinfo.tex file is distributed in the hope that it will be
% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
@@ -20,18 +19,25 @@
% General Public License for more details.
%
% You should have received a copy of the GNU General Public License
-% along with this program. If not, see <http://www.gnu.org/licenses/>.
-%
-% As a special exception, when this file is read by TeX when processing
-% a Texinfo source document, you may use the result without
-% restriction. (This has been our intent since Texinfo was invented.)
+% along with this texinfo.tex file; see the file COPYING. If not, write
+% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+% Boston, MA 02111-1307, USA.
+%
+% In other words, you are welcome to use, share and improve this program.
+% You are forbidden to forbid anyone else to use, share and improve
+% what you give them. Help stamp out software-hoarding!
%
% Please try the latest version of texinfo.tex before submitting bug
% reports; you can get the latest version from:
-% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
+% ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex
+% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org).
-% The texinfo.tex in any given distribution could well be out
+% (and all CTAN mirrors, see http://www.ctan.org),
+% and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+%
+% The texinfo.tex in any given Texinfo distribution could well be out
% of date, so if that's what you're using, please check.
%
% Send bug reports to bug-texinfo gnu org Please include including a
@@ -53,9 +59,6 @@
% It is possible to adapt texinfo.tex for other languages, to some
% extent. You can get the existing language-specific files from the
% full Texinfo distribution.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-
\message{Loading texinfo [version \texinfoversion]:}
@@ -65,7 +68,7 @@
\everyjob{\message{[Texinfo version \texinfoversion]}%
\catcode`+=\active \catcode`\_=\active}
-
+\message{Basics,}
\chardef\other=12
% We never want plain's \outer definition of \+ in Texinfo.
@@ -82,16 +85,13 @@
\let\ptexend=\end
\let\ptexequiv=\equiv
\let\ptexexclam=\!
-\let\ptexfootnote=\footnote
\let\ptexgtr=>
\let\ptexhat=^
\let\ptexi=\i
\let\ptexindent=\indent
-\let\ptexinsert=\insert
+\let\ptexnoindent=\noindent
\let\ptexlbrace=\{
\let\ptexless=<
-\let\ptexnewwrite\newwrite
-\let\ptexnoindent=\noindent
\let\ptexplus=+
\let\ptexrbrace=\}
\let\ptexslash=\/
@@ -102,15 +102,6 @@
% starts a new line in the output.
\newlinechar = `^^J
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Pre-3.0.
-\else
- \def\linenumber{l.\the\inputlineno:\space}
-\fi
-
% Set up fixed words for English if not already set.
\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
@@ -149,83 +140,43 @@
\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
+\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
-% Since the category of space is not known, we have to be careful.
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode`\ =\spacecat}
-
-% sometimes characters are active, so we need control sequences.
+% In some macros, we cannot use the `\? notation---the left quote is
+% in some cases the escape char.
\chardef\colonChar = `\:
\chardef\commaChar = `\,
-\chardef\dashChar = `\-
\chardef\dotChar = `\.
+\chardef\equalChar = `\=
\chardef\exclamChar= `\!
-\chardef\lquoteChar= `\`
\chardef\questChar = `\?
-\chardef\rquoteChar= `\'
\chardef\semiChar = `\;
+\chardef\spaceChar = `\ %
\chardef\underChar = `\_
% Ignore a token.
%
\def\gobble#1{}
-% The following is used inside several \edef's.
-\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+% True if #1 is the empty string, i.e., called like `\ifempty{}'.
+%
+\def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}%
+\def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}%
% Hyphenation fixes.
-\hyphenation{
- Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
- ap-pen-dix bit-map bit-maps
- data-base data-bases eshell fall-ing half-way long-est man-u-script
- man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
- par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
- spell-ing spell-ings
- stand-alone strong-est time-stamp time-stamps which-ever white-space
- wide-spread wrap-around
-}
+\hyphenation{ap-pen-dix}
+\hyphenation{eshell}
+\hyphenation{mini-buf-fer mini-buf-fers}
+\hyphenation{time-stamp}
+\hyphenation{white-space}
% Margin to add to right of even pages, to left of odd pages.
\newdimen\bindingoffset
\newdimen\normaloffset
\newdimen\pagewidth \newdimen\pageheight
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt}
-
-% @| inserts a changebar to the left of the current line. It should
-% surround any changed text. This approach does *not* work if the
-% change spans more than two lines of output. To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
- % \vadjust can only be used in horizontal mode.
- \leavevmode
- %
- % Append this vertical mode material after the current line in the output.
- \vadjust{%
- % We want to insert a rule with the height and depth of the current
- % leading; that is exactly what \strutbox is supposed to record.
- \vskip-\baselineskip
- %
- % \vadjust-items are inserted at the left edge of the type. So
- % the \llap here moves out into the left-hand margin.
- \llap{%
- %
- % For a thicker or thinner bar, change the `1pt'.
- \vrule height\baselineskip width1pt
- %
- % This is the space between the bar and the text.
- \hskip 12pt
- }%
- }%
-}
-
% Sometimes it is convenient to have everything in the transcript file
% and nothing on the terminal. We don't just call \tracingall here,
% since that produces some useless output on the terminal. We also make
@@ -250,7 +201,7 @@
\tracingassigns1
\fi
\tracingcommands3 % 3 gives us more in etex
- \errorcontextlines16
+ \errorcontextlines\maxdimen
}%
% add check for \lastpenalty to plain's definitions. If the last thing
@@ -277,50 +228,6 @@
\newdimen\cornerthick \cornerthick=.3pt
\newdimen\topandbottommargin \topandbottommargin=.75in
-% Output a mark which sets \thischapter, \thissection and \thiscolor.
-% We dump everything together because we only have one kind of mark.
-% This works because we only use \botmark / \topmark, not \firstmark.
-%
-% A mark contains a subexpression of the \ifcase ... \fi construct.
-% \get*marks macros below extract the needed part using \ifcase.
-%
-% Another complication is to let the user choose whether \thischapter
-% (\thissection) refers to the chapter (section) in effect at the top
-% of a page, or that at the bottom of a page. The solution is
-% described on page 260 of The TeXbook. It involves outputting two
-% marks for the sectioning macros, one before the section break, and
-% one after. I won't pretend I can describe this better than DEK...
-\def\domark{%
- \toks0=\expandafter{\lastchapterdefs}%
- \toks2=\expandafter{\lastsectiondefs}%
- \toks4=\expandafter{\prevchapterdefs}%
- \toks6=\expandafter{\prevsectiondefs}%
- \toks8=\expandafter{\lastcolordefs}%
- \mark{%
- \the\toks0 \the\toks2
- \noexpand\or \the\toks4 \the\toks6
- \noexpand\else \the\toks8
- }%
-}
-% \topmark doesn't work for the very first chapter (after the title
-% page or the contents), so we use \firstmark there -- this gets us
-% the mark with the chapter defs, unless the user sneaks in, e.g.,
-% @setcolor (or @url, or @link, etc.) between @contents and the very
-% first @chapter.
-\def\gettopheadingmarks{%
- \ifcase0\topmark\fi
- \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
-}
-\def\getbottomheadingmarks{\ifcase1\botmark\fi}
-\def\getcolormarks{\ifcase2\topmark\fi}
-
-% Avoid "undefined control sequence" errors.
-\def\lastchapterdefs{}
-\def\lastsectiondefs{}
-\def\prevchapterdefs{}
-\def\prevsectiondefs{}
-\def\lastcolordefs{}
-
% Main output routine.
\chardef\PAGE = 255
\output = {\onepageout{\pagecontents\PAGE}}
@@ -338,9 +245,7 @@
%
% Do this outside of the \shipout so @code etc. will be expanded in
% the headline as they should be, not taken literally (outputting ''code).
- \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
\setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
\setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
%
{%
@@ -348,17 +253,13 @@
% take effect in \write's, yet the group defined by the \vbox ends
% before the \shipout runs.
%
+ \escapechar = `\\ % use backslash in output files.
\indexdummies % don't expand commands in the output.
\normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
- % We don't want .vr (or whatever) entries like this:
- % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
- % "\acronym" won't work when it's read back in;
- % it needs to be
- % {\code {{\tt \backslashcurfont }acronym}
+ % the page break happens to be in the middle of an example.
\shipout\vbox{%
% Do this early so pdf references go to the beginning of the page.
- \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+ \ifpdfmakepagedest \pdfmkdest{\the\pageno}\fi
%
\ifcropmarks \vbox to \outervsize\bgroup
\hsize = \outerhsize
@@ -383,9 +284,9 @@
\pagebody{#1}%
\ifdim\ht\footlinebox > 0pt
% Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingyyy.)
+ % (We lessened \vsize for it in \oddfootingxxx.)
% The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 24pt
+ \vskip 2\baselineskip
\unvbox\footlinebox
\fi
%
@@ -406,7 +307,7 @@
\egroup % \vbox from first cropmarks clause
\fi
}% end of \shipout\vbox
- }% end of group with \indexdummies
+ }% end of group with \normalturnoffactive
\advancepageno
\ifnum\outputpenalty>-20000 \else\dosupereject\fi
}
@@ -419,7 +320,7 @@
% marginal hacks, juha viisa uucp (Juha Takala)
\ifvoid\margin\else % marginal info is present
\rlap{\kern\hsize\vbox to\z {\kern1pt\box\margin \vss}}\fi
-\dimen =\dp#1\relax \unvbox#1\relax
+\dimen =\dp#1 \unvbox#1
\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
\ifr ggedbottom \kern-\dimen@ \vfil \fi}
}
@@ -439,161 +340,132 @@
% the input line (except we remove a trailing comment). #1 should be a
% macro which expects an ordinary undelimited TeX argument.
%
-\def\parsearg{\parseargusing{}}
-\def\parseargusing#1#2{%
- \def\argtorun{#2}%
+\def\parsearg#1{%
+ \let\next = #1%
\begingroup
\obeylines
- \spaceisspace
- #1%
- \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+ \futurelet\temp\parseargx
+}
+
+% If the next token is an obeyed space (from an @example environment or
+% the like), remove it and recurse. Otherwise, we're done.
+\def\parseargx{%
+ % \obeyedspace is defined far below, after the definition of \sepspaces.
+ \ifx\obeyedspace\temp
+ \expandafter\parseargdiscardspace
+ \else
+ \expandafter\parseargline
+ \fi
}
+% Remove a single space (as the delimiter token to the macro call).
+{\obeyspaces %
+ \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
+
{\obeylines %
\gdef\parseargline#1^^M{%
\endgroup % End of the group started in \parsearg.
- \argremovecomment #1\comment\ArgTerm%
+ %
+ % First remove any @c comment, then any @comment.
+ % Result of each macro is put in \toks0.
+ \argremovec #1\c\relax %
+ \expandafter\argremovecomment \the\toks0 \comment\relax %
+ %
+ % Call the caller's macro, saved as \next in \parsearg.
+ \expandafter\next\expandafter{\the\toks0}%
}%
}
-% First remove any @comment, then any @c comment.
-\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
-\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+% Since all \c{,omment} does is throw away the argument, we can let TeX
+% do that for us. The \relax here is matched by the \relax in the call
+% in \parseargline; it could be more or less anything, its purpose is
+% just to delimit the argument to the \c.
+\def\argremovec#1\c#2\relax{\toks0 = {#1}}
+\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
-% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
-%
-% \argremovec might leave us with trailing space, e.g.,
+% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
% @end itemize @c foo
-% This space token undergoes the same procedure and is eventually removed
-% by \finishparsearg.
+% will have two active spaces as part of the argument with the
+% `itemize'. Here we remove all active spaces from #1, and assign the
+% result to \toks0.
+%
+% This loses if there are any *other* active characters besides spaces
+% in the argument -- _ ^ +, for example -- since they get expanded.
+% Fortunately, Texinfo does not define any such commands. (If it ever
+% does, the catcode of the characters in questionwill have to be changed
+% here.) But this means we cannot call \removeactivespaces as part of
+% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
+% that \parsearg gets might well have any character at all in it.
%
-\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
-\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
-\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
- \def\temp{#3}%
- \ifx\temp\empty
- % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
- \let\temp\finishparsearg
- \else
- \let\temp\argcheckspaces
- \fi
- % Put the space token in:
- \temp#1 #3\ArgTerm
+\def\removeactivespaces#1{%
+ \begingroup
+ \ignoreactivespaces
+ \edef\temp{#1}%
+ \global\toks0 = \expandafter{\temp}%
+ \endgroup
}
-% If a _delimited_ argument is enclosed in braces, they get stripped; so
-% to get _exactly_ the rest of the line, we had to prevent such situation.
-% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \argtorun.
-% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
-% either the null string, or it ends with \^^M---thus there is no danger
-% that a pair of braces would be stripped.
-%
-% But first, we have to remove the trailing space token.
+% Change the active space to expand to nothing.
%
-\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
+\begingroup
+ \obeyspaces
+ \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
+\endgroup
-% \parseargdef\foo{...}
-% is roughly equivalent to
-% \def\foo{\parsearg\Xfoo}
-% \def\Xfoo#1{...}
-%
-% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
-% favourite TeX trick. --kasal, 16nov03
-\def\parseargdef#1{%
- \expandafter \doparseargdef \csname\string#1\endcsname #1%
-}
-\def\doparseargdef#1#2{%
- \def#2{\parsearg#1}%
- \def#1##1%
-}
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-% Several utility definitions with active space:
-{
- \obeyspaces
- \gdef\obeyedspace{ }
+%% These are used to keep @begin/@end levels from running away
+%% Call \inENV within environments (after a \begingroup)
+\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
+\def\ENVcheck{%
+\ifENV\errmessage{Still within an environment; press RETURN to continue}
+\endgroup\fi} % This is not perfect, but it should reduce lossage
- % Make each space character in the input produce a normal interword
- % space in the output. Don't allow a line break at this space, as this
- % is used only in environments like @example, where each line of input
- % should produce a line of output anyway.
- %
- \gdef\sepspaces{\obeyspaces\let =\tie}
-
- % If an index command is used in an @example environment, any spaces
- % therein should become regular spaces in the raw index file, not the
- % expansion of \tie (\leavevmode \penalty \ M \ ).
- \gdef\unsepspaces{\let =\space}
-}
+% @begin foo is the same as @foo, for now.
+\newhelp\EMsimple{Press RETURN to continue.}
+\outer\def\begin{\parsearg\beginxxx}
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+\def\beginxxx #1{%
+\expandafter\ifx\csname #1\endcsname\relax
+{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
+\csname #1\endcsname\fi}
-% Define the framework for environments in texinfo.tex. It's used like this:
-%
-% \envdef\foo{...}
-% \def\Efoo{...}
+% @end foo executes the definition of \Efoo.
%
-% It's the responsibility of \envdef to insert \begingroup before the
-% actual body; @end closes the group after calling \Efoo. \envdef also
-% defines \thisenv, so the current environment is known; @end checks
-% whether the environment name matches. The \checkenv macro can also be
-% used to check whether the current environment is the one expected.
-%
-% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as enviroments; they don't open a group. (The
-% implementation of @end takes care not to call \endgroup in this
-% special case.)
-
-
-% At runtime, environments start with this:
-\def\startenvironment#1{\begingroup\def\thisenv{#1}}
-% initialize
-\let\thisenv\empty
-
-% ... but they get defined via ``\envdef\foo{...}'':
-\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
-\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
-
-% Check whether we're in the right environment:
-\def\checkenv#1{%
- \def\temp{#1}%
- \ifx\thisenv\temp
+\def\end{\parsearg\endxxx}
+\def\endxxx #1{%
+ \removeactivespaces{#1}%
+ \edef\endthing{\the\toks0}%
+ %
+ \expandafter\ifx\csname E\endthing\endcsname\relax
+ \expandafter\ifx\csname \endthing\endcsname\relax
+ % There's no \foo, i.e., no ``environment'' foo.
+ \errhelp = \EMsimple
+ \errmessage{Undefined command ` end \endthing'}%
+ \else
+ \unmatchedenderror\endthing
+ \fi
\else
- \badenverr
+ % Everything's ok; the right environment has been started.
+ \csname E\endthing\endcsname
\fi
}
-% Evironment mismatch, #1 expected:
-\def\badenverr{%
+% There is an environment #1, but it hasn't been started. Give an error.
+%
+\def\unmatchedenderror#1{%
\errhelp = \EMsimple
- \errmessage{This command can appear only \inenvironment\temp,
- not \inenvironment\thisenv}%
-}
-\def\inenvironment#1{%
- \ifx#1\empty
- out of any environment%
- \else
- in environment \expandafter\string#1%
- \fi
+ \errmessage{This ` end #1' doesn't have a matching ` #1'}%
}
-% @end foo executes the definition of \Efoo.
-% But first, it executes a specialized version of \checkenv
+% Define the control sequence \E#1 to give an unmatched @end error.
%
-\parseargdef\end{%
- \if 1\csname iscond.#1\endcsname
- \else
- % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
- \expandafter\checkenv\csname#1\endcsname
- \csname E#1\endcsname
- \endgroup
- \fi
+\def\defineunmatchedend#1{%
+ \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
}
-\newhelp\EMsimple{Press RETURN to continue.}
-
%% Simple single-character @ commands
@@ -615,7 +487,7 @@
\let\}=\myrbrace
\begingroup
% Definitions to produce \{ and \} commands for indices,
- % and @{ and @} for the aux/toc files.
+ % and @{ and @} for the aux file.
\catcode`\{ = \other \catcode`\} = \other
\catcode`\[ = 1 \catcode`\] = 2
\catcode`\! = 0 \catcode`\\ = \other
@@ -625,9 +497,6 @@
!gdef!rbraceatcmd[ }]%
!endgroup
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
\let\, = \c
@@ -637,12 +506,10 @@
\let\ubaraccent = \b
\let\udotaccent = \d
-% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Other special characters: @questiondown @exclamdown
% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
\def\questiondown{?`}
\def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
% Dotless i and dotless j, used for accents.
\def\imacro{i}
@@ -655,25 +522,6 @@
\fi\fi
}
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence. (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo. Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
- L\kern-.36em
- {\setbox0=\hbox{T}%
- \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
- \kern-.15em
- \TeX
-}
-
% Be sure we're in horizontal mode when doing a tie, since we make space
% equivalent to this in @example-like environments. Otherwise, a space
% at the beginning of a line will start with \penalty -- and
@@ -696,28 +544,13 @@
\let\/=\allowbreak
% @. is an end-of-sentence period.
-\def\.{.\spacefactor=\endofsentencespacefactor\space}
+\def\.{.\spacefactor=3000 }
% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=\endofsentencespacefactor\space}
+\def\!{!\spacefactor=3000 }
% @? is an end-of-sentence query.
-\def\?{?\spacefactor=\endofsentencespacefactor\space}
-
-% @frenchspacing on|off says whether to put extra space after punctuation.
-%
-\def\onword{on}
-\def\offword{off}
-%
-\parseargdef\frenchspacing{%
- \def\temp{#1}%
- \ifx\temp\onword \plainfrenchspacing
- \else\ifx\temp\offword \plainnonfrenchspacing
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
- \fi\fi
-}
+\def\?{?\spacefactor=3000 }
% @w prevents a word break. Without the \leavevmode, @w at the
% beginning of a paragraph, when TeX is still in vertical mode, would
@@ -742,14 +575,59 @@
\newbox\groupbox
\def\vfilllimit{0.7}
%
-\envdef\group{%
- \ifnum\catcode`\^^M=\active \else
+\def\group{\begingroup
+ \ifnum\catcode13=\active \else
\errhelp = \groupinvalidhelp
\errmessage{ group invalid in context where filling is enabled}%
\fi
- \startsavinginserts
+ %
+ % The \vtop we start below produces a box with normal height and large
+ % depth; thus, TeX puts \baselineskip glue before it, and (when the
+ % next line of text is done) \lineskip glue after it. (See p.82 of
+ % the TeXbook.) Thus, space below is not quite equal to space
+ % above. But it's pretty close.
+ \def\Egroup{%
+ \egroup % End the \vtop.
+ % \dimen0 is the vertical size of the group's box.
+ \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
+ % \dimen2 is how much space is left on the page (more or less).
+ \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
+ % if the group doesn't fit on the current page, and it's a big big
+ % group, force a page break.
+ \ifdim \dimen0 > \dimen2
+ \ifdim \pagetotal < \vfilllimit\pageheight
+ \page
+ \fi
+ \fi
+ \copy\groupbox
+ \endgroup % End the \group.
+ }%
%
\setbox\groupbox = \vtop\bgroup
+ % We have to put a strut on the last line in case the @group is in
+ % the midst of an example, rather than completely enclosing it.
+ % Otherwise, the interline space between the last line of the group
+ % and the first line afterwards is too small. But we can't put the
+ % strut in \Egroup, since there it would be on a line by itself.
+ % Hence this just inserts a strut at the beginning of each line.
+ \everypar = {\strut}%
+ %
+ % Since we have a strut on every line, we don't need any of TeX's
+ % normal interline spacing.
+ \offinterlineskip
+ %
+ % OK, but now we have to do something about blank
+ % lines in the input in @example-like environments, which normally
+ % just turn into \lisppar, which will insert no space now that we've
+ % turned off the interline space. Simplest is to make them be an
+ % empty paragraph.
+ \ifx\par\lisppar
+ \edef\par{\leavevmode \par}%
+ %
+ % Reset ^^M's definition to new definition of \par.
+ \obeylines
+ \fi
+ %
% Do @comment since we are called inside an environment such as
% @example, where each end-of-line in the input causes an
% end-of-line in the output. We don't want the end-of-line after
@@ -759,32 +637,6 @@
\comment
}
%
-% The \vtop produces a box with normal height and large depth; thus, TeX puts
-% \baselineskip glue before it, and (when the next line of text is done)
-% \lineskip glue after it. Thus, space below is not quite equal to space
-% above. But it's pretty close.
-\def\Egroup{%
- % To get correct interline space between the last line of the group
- % and the first line afterwards, we have to propagate \prevdepth.
- \endgraf % Not \par, as it may have been set to \lisppar.
- \global\dimen1 = \prevdepth
- \egroup % End the \vtop.
- % \dimen0 is the vertical size of the group's box.
- \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
- % \dimen2 is how much space is left on the page (more or less).
- \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
- % if the group doesn't fit on the current page, and it's a big big
- % group, force a page break.
- \ifdim \dimen0 > \dimen2
- \ifdim \pagetotal < \vfilllimit\pageheight
- \page
- \fi
- \fi
- \box\groupbox
- \prevdepth = \dimen1
- \checkinserts
-}
-%
% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
% message, so this ends up printing ` group can only ...'.
%
@@ -797,8 +649,10 @@
\newdimen\mil \mil=0.001in
+\def\need{\parsearg\needx}
+
% Old definition--didn't work.
-%\parseargdef\need{\par %
+%\def\needx #1{\par %
%% This method tries to make TeX break the page naturally
%% if the depth of the box does not fit.
%{\baselineskip=0pt%
@@ -806,7 +660,7 @@
%\prevdepth=-1000pt
%}}
-\parseargdef\need{%
+\def\needx#1{%
% Ensure vertical mode, so we don't make a big box in the middle of a
% paragraph.
\par
@@ -845,10 +699,35 @@
\fi
}
-% @br forces paragraph break (and is undocumented).
+% @br forces paragraph break
\let\br = \par
+% @dots{} output an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in a typewriter
+% font as three actual period characters.
+%
+\def\dots{%
+ \leavevmode
+ \hbox to 1.5em{%
+ \hskip 0pt plus 0.25fil minus 0.25fil
+ .\hss.\hss.%
+ \hskip 0pt plus 0.5fil minus 0.5fil
+ }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+ \leavevmode
+ \hbox to 2em{%
+ \hskip 0pt plus 0.25fil minus 0.25fil
+ .\hss.\hss.\hss.%
+ \hskip 0pt plus 0.5fil minus 0.5fil
+ }%
+ \spacefactor=3000
+}
+
% @page forces the start of a new page.
%
\def\page{\par\vfill\supereject}
@@ -861,11 +740,13 @@
\newskip\exdentamount
% This defn is used inside fill environments such as @defun.
-\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+\def\exdent{\parsearg\exdentyyy}
+\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
% This defn is used inside nofill environments such as @example.
-\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
- \leftline{\hskip\leftskip{\rm#1}}}}
+\def\nofillexdent{\parsearg\nofillexdentyyy}
+\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
+\leftline{\hskip\leftskip{\rm#1}}}}
% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
% paragraph. For more general purposes, use the \margin insertion
@@ -917,19 +798,8 @@
}
% @include file insert text of that file as input.
-%
-\def\include{\parseargusing\filenamecatcodes\includezzz}
-\def\includezzz#1{%
- \pushthisfilestack
- \def\thisfile{#1}%
- {%
- \makevalueexpandable
- \def\temp{\input #1 }%
- \expandafter
- }\temp
- \popthisfilestack
-}
-\def\filenamecatcodes{%
+% Allow normal characters that we make active in the argument (a file name).
+\def\include{\begingroup
\catcode`\\=\other
\catcode`~=\other
\catcode`^=\other
@@ -938,50 +808,33 @@
\catcode`<=\other
\catcode`>=\other
\catcode`+=\other
- \catcode`-=\other
-}
-
-\def\pushthisfilestack{%
- \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
-}
-\def\pushthisfilestackX{%
- \expandafter\pushthisfilestackY\thisfile\StackTerm
-}
-\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
- \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
-}
-
-\def\popthisfilestack{\errthisfilestackempty}
-\def\errthisfilestackempty{\errmessage{Internal error:
- the stack of filenames is empty.}}
+ \parsearg\includezzz}
+% Restore active chars for included file.
+\def\includezzz#1{\endgroup\begingroup
+ % Read the included file in a group so nested @include's work.
+ \def\thisfile{#1}%
+ \let\value=\expandablevalue
+ \input\thisfile
+\endgroup}
\def\thisfile{}
% @center line
% outputs that line, centered.
%
-\parseargdef\center{%
- \ifhmode
- \let\next\centerH
- \else
- \let\next\centerV
- \fi
- \next{\hfil \ignorespaces#1\unskip \hfil}%
-}
-\def\centerH#1{%
- {%
- \hfil\break
- \advance\hsize by -\leftskip
- \advance\hsize by -\rightskip
- \line{#1}%
- \break
- }%
-}
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
+\def\center{\parsearg\docenter}
+\def\docenter#1{{%
+ \ifhmode \hfil\break \fi
+ \advance\hsize by -\leftskip
+ \advance\hsize by -\rightskip
+ \line{\hfil \ignorespaces#1\unskip \hfil}%
+ \ifhmode \break \fi
+}}
% @sp n outputs n lines of vertical space
-\parseargdef\sp{\vskip #1\baselineskip}
+\def\sp{\parsearg\spxxx}
+\def\spxxx #1{\vskip #1\baselineskip}
% @comment ...line which is ignored...
% @c is the same as @comment
@@ -1002,7 +855,8 @@
\def\asisword{asis} % no translation, these are keywords
\def\noneword{none}
%
-\parseargdef\paragraphindent{%
+\def\paragraphindent{\parsearg\doparagraphindent}
+\def\doparagraphindent#1{%
\def\temp{#1}%
\ifx\temp\asisword
\else
@@ -1019,7 +873,8 @@
% We'll use ems for NCHARS like @paragraphindent.
% It seems @exampleindent asis isn't necessary, but
% I preserve it to make it similar to @paragraphindent.
-\parseargdef\exampleindent{%
+\def\exampleindent{\parsearg\doexampleindent}
+\def\doexampleindent#1{%
\def\temp{#1}%
\ifx\temp\asisword
\else
@@ -1042,9 +897,12 @@
% By default, we suppress indentation.
%
\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\newdimen\currentparindent
+%
\def\insertword{insert}
%
-\parseargdef\firstparagraphindent{%
+\def\firstparagraphindent{\parsearg\dofirstparagraphindent}
+\def\dofirstparagraphindent#1{%
\def\temp{#1}%
\ifx\temp\noneword
\let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
@@ -1089,18 +947,23 @@
\def\asis#1{#1}
% @math outputs its argument in math mode.
+% We don't use $'s directly in the definition of \math because we need
+% to set catcodes according to plain TeX first, to allow for subscripts,
+% superscripts, special math chars, etc.
+%
+\let\implicitmath = $%$ font-lock fix
%
% One complication: _ usually means subscripts, but it could also mean
% an actual _ character, as in @math{ var{some_variable} + 1}. So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
- \catcode`\_ = \active
- \gdef\mathunderscore{%
- \catcode`\_=\active
- \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
- }
-}
+% _ within @math be active (mathcode "8000), and distinguish by seeing
+% if the current family is \slfam, which is what @var uses.
+%
+{\catcode\underChar = \active
+\gdef\mathunderscore{%
+ \catcode\underChar=\active
+ \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+}}
+%
% Another complication: we want \\ (and @\) to output a \ character.
% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
% this is not advertised and we don't care. Texinfo does not
@@ -1111,16 +974,15 @@
%
\def\math{%
\tex
- \mathunderscore
+ \mathcode`\_="8000 \mathunderscore
\let\\ = \mathbackslash
\mathactive
- $\finishmath
-}
-\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
+ \implicitmath\finishmath}
+\def\finishmath#1{#1\implicitmath\Etex}
% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
+% We have to reset their definitions in case the @math was an
+% argument to a command which set the catcodes (such as @item or @section).
%
{
\catcode`^ = \active
@@ -1136,42 +998,8 @@
}
% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in the cm
-% typewriter fonts as three actual period characters; on the other hand,
-% in other typewriter fonts three periods are wider than 1.5em. So do
-% whichever is larger.
-%
-\def\dots{%
- \leavevmode
- \setbox0=\hbox{...}% get width of three periods
- \ifdim\wd0 > 1.5em
- \dimen0 = \wd0
- \else
- \dimen0 = 1.5em
- \fi
- \hbox to \dimen0{%
- \hskip 0pt plus.25fil
- .\hskip 0pt plus1fil
- .\hskip 0pt plus1fil
- .\hskip 0pt plus.5fil
- }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
- \dots
- \spacefactor=\endofsentencespacefactor
-}
-
-% @comma{} is so commas can be inserted into text without messing up
-% Texinfo's parsing.
-%
-\let\comma = ,
+\def\bullet{\implicitmath\ptexbullet\implicitmath}
+\def\minus{\implicitmath-\implicitmath}
% @refill is a no-op.
\let\refill=\relax
@@ -1187,20 +1015,20 @@
% So open here the files we need to have open while reading the input.
% This makes it possible to make a .fmt file for texinfo.
\def\setfilename{%
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
\iflinks
- \tryauxfile
- % Open the new aux file. TeX will close it automatically at exit.
- \immediate\openout\auxfile=\jobname.aux
+ \readauxfile
\fi % \openindices needs to do some work in any case.
\openindices
- \let\setfilename=\comment % Ignore extra @setfilename cmds.
+ \fixbackslash % Turn off hack to swallow `\input texinfo'.
+ \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
%
% If texinfo.cnf is present on the system, read it.
% Useful for site-wide @afourpaper, etc.
+ % Just to be on the safe side, close the input stream before the \input.
\openin 1 texinfo.cnf
- \ifeof 1 \else \input texinfo.cnf \fi
- \closein 1
+ \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
+ \closein1
+ \temp
%
\comment % Ignore the actual filename.
}
@@ -1236,147 +1064,21 @@
\newif\ifpdf
\newif\ifpdfmakepagedest
-% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set). So we test for \relax and 0 as well as \undefined,
-% borrowed from ifpdf.sty.
\ifx\pdfoutput\undefined
+ \pdffalse
+ \let\pdfmkdest = \gobble
+ \let\pdfurl = \gobble
+ \let\endlink = \relax
+ \let\linkcolor = \relax
+ \let\pdfmakeoutlines = \relax
\else
- \ifx\pdfoutput\relax
- \else
- \ifcase\pdfoutput
- \else
- \pdftrue
- \fi
- \fi
-\fi
-
-% PDF uses PostScript string constants for the names of xref targets,
-% for display in the outlines, and in other places. Thus, we have to
-% double any backslashes. Otherwise, a name like "\node" will be
-% interpreted as a newline (\n), followed by o, d, e. Not good.
-% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
-% (and related messages, the final outcome is that it is up to the TeX
-% user to double the backslashes and otherwise make the string valid, so
-% that's what we do).
-
-% double active backslashes.
-%
-{\catcode`\ =0 \catcode`\\=\active
- @gdef activebackslashdouble{%
- @catcode` \=@active
- @let\= doublebackslash}
-}
-
-% To handle parens, we must adopt a different approach, since parens are
-% not active characters. hyperref.dtx (which has the same problem as
-% us) handles it with this amazing macro to replace tokens, with minor
-% changes for Texinfo. It is included here under the GPL by permission
-% from the author, Heiko Oberdiek.
-%
-% #1 is the tokens to replace.
-% #2 is the replacement.
-% #3 is the control sequence with the string.
-%
-\def\HyPsdSubst#1#2#3{%
- \def\HyPsdReplace##1#1##2\END{%
- ##1%
- \ifx\\##2\\%
- \else
- #2%
- \HyReturnAfterFi{%
- \HyPsdReplace##2\END
- }%
- \fi
- }%
- \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
-}
-\long\def\HyReturnAfterFi#1\fi{\fi#1}
-
-% #1 is a control sequence in which to do the replacements.
-\def\backslashparens#1{%
- \xdef#1{#1}% redefine it as its expansion; the definition is simply
- % \lastnode when called from \setref -> \pdfmkdest.
- \HyPsdSubst{(}{\realbackslash(}{#1}%
- \HyPsdSubst{)}{\realbackslash)}{#1}%
-}
-
-\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
-with PDF output, and none of those formats could be found. (.eps cannot
-be supported due to the design of the PDF format; use regular TeX (DVI
-output) for that.)}
-
-\ifpdf
- %
- % Color manipulation macros based on pdfcolor.tex.
- \def\cmykDarkRed{0.28 1 1 0.35}
- \def\cmykBlack{0 0 0 1}
- %
- \def\pdfsetcolor#1{\pdfliteral{#1 k}}
- % Set color, and create a mark which defines \thiscolor accordingly,
- % so that \makeheadline knows which color to restore.
- \def\setcolor#1{%
- \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
- \domark
- \pdfsetcolor{#1}%
- }
- %
- \def\maincolor{\cmykBlack}
- \pdfsetcolor{\maincolor}
- \edef\thiscolor{\maincolor}
- \def\lastcolordefs{}
- %
- \def\makefootline{%
- \baselineskip24pt
- \line{\pdfsetcolor{\maincolor}\the\footline}%
- }
- %
- \def\makeheadline{%
- \vbox to 0pt{%
- \vskip-22.5pt
- \line{%
- \vbox to8.5pt{}%
- % Extract \thiscolor definition from the marks.
- \getcolormarks
- % Typeset the headline with \maincolor, then restore the color.
- \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
- }%
- \vss
- }%
- \nointerlineskip
- }
- %
- %
- \pdfcatalog{/PageMode /UseOutlines}
- %
- % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+ \pdftrue
+ \pdfoutput = 1
+ \input pdfcolor
+ \pdfcatalog{/PageMode /UseOutlines}%
\def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
- \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
- %
- % pdftex (and the PDF format) support .png, .jpg, .pdf (among
- % others). Let's try in that order.
- \let\pdfimgext=\empty
- \begingroup
- \openin 1 #1.png \ifeof 1
- \openin 1 #1.jpg \ifeof 1
- \openin 1 #1.jpeg \ifeof 1
- \openin 1 #1.JPG \ifeof 1
- \openin 1 #1.pdf \ifeof 1
- \errhelp = \nopdfimagehelp
- \errmessage{Could not find image file #1 for pdf}%
- \else \gdef\pdfimgext{pdf}%
- \fi
- \else \gdef\pdfimgext{JPG}%
- \fi
- \else \gdef\pdfimgext{jpeg}%
- \fi
- \else \gdef\pdfimgext{jpg}%
- \fi
- \else \gdef\pdfimgext{png}%
- \fi
- \closein 1
- \endgroup
- %
+ \def\imagewidth{#2}%
+ \def\imageheight{#3}%
% without \immediate, pdftex seg faults when the same image is
% included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
\ifnum\pdftexversion < 14
@@ -1384,38 +1086,20 @@
\else
\immediate\pdfximage
\fi
- \ifdim \wd0 >0pt width \imagewidth \fi
- \ifdim \wd2 >0pt height \imageheight \fi
+ \ifx\empty\imagewidth\else width \imagewidth \fi
+ \ifx\empty\imageheight\else height \imageheight \fi
\ifnum\pdftexversion<13
- #1.\pdfimgext
+ #1.pdf%
\else
- {#1.\pdfimgext}%
+ {#1.pdf}%
\fi
\ifnum\pdftexversion < 14 \else
\pdfrefximage \pdflastximage
\fi}
- %
- \def\pdfmkdest#1{{%
- % We have to set dummies so commands such as @code, and characters
- % such as \, aren't expanded when present in a section title.
- \indexnofonts
- \turnoffactive
- \activebackslashdouble
- \makevalueexpandable
- \def\pdfdestname{#1}%
- \backslashparens\pdfdestname
- \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
- }}
- %
- % used to mark target names; must be expandable.
+ \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
\def\pdfmkpgn#1{#1}
- %
- % by default, use a color that is dark enough to print on paper as
- % nearly black, but still distinguishable for online viewing.
- \def\urlcolor{\cmykDarkRed}
- \def\linkcolor{\cmykDarkRed}
- \def\endlink{\setcolor{\maincolor}\pdfendlink}
- %
+ \let\linkcolor = \Blue % was Cyan, but that seems light?
+ \def\endlink{\Black\pdfendlink}
% Adding outlines to PDF; macros for calculating structure of outlines
% come from Petr Olsak
\def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
@@ -1424,60 +1108,39 @@
\advance\tempnum by 1
\expandafter\xdef\csname#1\endcsname{\the\tempnum}}
%
- % #1 is the section text, which is what will be displayed in the
- % outline by the pdf viewer. #2 is the pdf expression for the number
- % of subentries (or empty, for subsubsections). #3 is the node text,
- % which might be empty if this toc entry had no corresponding node.
- % #4 is the page number
- %
+ % #1 is the section text. #2 is the pdf expression for the number
+ % of subentries (or empty, for subsubsections). #3 is the node
+ % text, which might be empty if this toc entry had no
+ % corresponding node. #4 is the page number.
+ %
\def\dopdfoutline#1#2#3#4{%
% Generate a link to the node text if that exists; else, use the
% page number. We could generate a destination for the section
% text in the case where a section has no node, but it doesn't
- % seem worth the trouble, since most documents are normally structured.
+ % seem worthwhile, since most documents are normally structured.
\def\pdfoutlinedest{#3}%
- \ifx\pdfoutlinedest\empty
- \def\pdfoutlinedest{#4}%
- \else
- % Doubled backslashes in the name.
- {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
- \backslashparens\pdfoutlinedest}%
- \fi
+ \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
%
- % Also double the backslashes in the display string.
- {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
- \backslashparens\pdfoutlinetext}%
- %
- \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+ \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
}
%
\def\pdfmakeoutlines{%
- \begingroup
+ \openin 1 \jobname.toc
+ \ifeof 1\else\begingroup
+ \closein 1
% Thanh's hack / proper braces in bookmarks
\edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
\edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
%
% Read toc silently, to get counts of subentries for \pdfoutline.
- \def\numchapentry##1##2##3##4{%
- \def\thischapnum{##2}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
- }%
+ \def\numchapentry##1##2##3##4{\def\thischapnum{##2}}%
\def\numsecentry##1##2##3##4{%
- \advancenumber{chap\thischapnum}%
- \def\thissecnum{##2}%
- \def\thissubsecnum{0}%
- }%
+ \def\thissecnum{##2}%
+ \advancenumber{chap\thischapnum}}%
\def\numsubsecentry##1##2##3##4{%
- \advancenumber{sec\thissecnum}%
- \def\thissubsecnum{##2}%
- }%
- \def\numsubsubsecentry##1##2##3##4{%
- \advancenumber{subsec\thissubsecnum}%
- }%
- \def\thischapnum{0}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
+ \def\thissubsecnum{##2}%
+ \advancenumber{sec\thissecnum}}%
+ \def\numsubsubsecentry##1##2##3##4{\advancenumber{subsec\thissubsecnum}}%
%
% use \def rather than \let here because we redefine \chapentry et
% al. a second time, below.
@@ -1489,12 +1152,12 @@
\def\unnsecentry{\numsecentry}%
\def\unnsubsecentry{\numsubsecentry}%
\def\unnsubsubsecentry{\numsubsubsecentry}%
- \readdatafile{toc}%
+ \input \jobname.toc
%
% Read toc second time, this time actually producing the outlines.
% The `-' means take the \expnumber as the absolute number of
% subentries, which we calculated on our first read of the .toc above.
- %
+ %
% We use the node names as the destinations.
\def\numchapentry##1##2##3##4{%
\dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1505,22 +1168,44 @@
\def\numsubsubsecentry##1##2##3##4{% count is always zero
\dopdfoutline{##1}{}{##3}{##4}}%
%
- % PDF outlines are displayed using system fonts, instead of
- % document fonts. Therefore we cannot use special characters,
- % since the encoding is unknown. For example, the eogonek from
- % Latin 2 (0xea) gets translated to a | character. Info from
- % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
- %
- % xx to do this right, we have to translate 8-bit characters to
- % their "best" equivalent, based on the @documentencoding. Right
- % now, I guess we'll just let the pdf reader have its way.
+ % Make special characters normal for writing to the pdf file.
\indexnofonts
- \setupdatafile
- \catcode`\\=\active \otherbackslash
- \input \tocreadfilename
- \endgroup
+ \turnoffactive
+ \input \jobname.toc
+ \endgroup\fi
}
%
+ \def\makelinks #1,{%
+ \def\params{#1}\def\E{END}%
+ \ifx\params\E
+ \let\nextmakelinks=\relax
+ \else
+ \let\nextmakelinks=\makelinks
+ \ifnum\lnkcount>0,\fi
+ \picknum{#1}%
+ \startlink attr{/Border [0 0 0]}
+ goto name{\pdfmkpgn{\the\pgn}}%
+ \linkcolor #1%
+ \advance\lnkcount by 1%
+ \endlink
+ \fi
+ \nextmakelinks
+ }
+ \def\picknum#1{\expandafter\pn#1}
+ \def\pn#1{%
+ \def\p{#1}%
+ \ifx\p\lbrace
+ \let\nextpn=\ppn
+ \else
+ \let\nextpn=\ppnn
+ \def\first{#1}
+ \fi
+ \nextpn
+ }
+ \def\ppn#1{\pgn=#1\gobble}
+ \def\ppnn{\pgn=\first}
+ \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
+ \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
\def\skipspaces#1{\def\PP{#1}\def\D{|}%
\ifx\PP\D\let\nextsp\relax
\else\let\nextsp\skipspaces
@@ -1535,28 +1220,21 @@
\else
\let \startlink \pdfstartlink
\fi
- % make a live url in pdf output.
\def\pdfurl#1{%
\begingroup
- % it seems we really need yet another set of dummies; have not
- % tried to figure out what each command should do in the context
- % of @url. for now, just make @/ a no-op, that's the only one
- % people have actually reported a problem with.
- %
- \normalturnoffactive
- \def\ {@}%
- \let\/=\empty
- \makevalueexpandable
- \leavevmode\setcolor{\urlcolor}%
+ \normalturnoffactive\def\ {@}%
+ \let\value=\expandablevalue
+ \leavevmode\Red
\startlink attr{/Border [0 0 0]}%
user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+ % #1
\endgroup}
\def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
\def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
\def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
\def\maketoks{%
- \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+ \expandafter\poptoks\the\toksA|ENDTOKS|
\ifx\first0\adn0
\else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
\else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
@@ -1574,48 +1252,22 @@
{\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
\def\pdflink#1{%
\startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \setcolor{\linkcolor}#1\endlink}
+ \linkcolor #1\endlink}
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\else
- \let\pdfmkdest = \gobble
- \let\pdfurl = \gobble
- \let\endlink = \relax
- \let\setcolor = \gobble
- \let\pdfsetcolor = \gobble
- \let\pdfmakeoutlines = \relax
-\fi % \ifx\pdfoutput
+\fi % \ifx\pdfoutput
\message{fonts,}
-
-% Change the current font style to #1, remembering it in \curfontstyle.
-% For now, we do not accumulate font styles: @b{ i{foo}} prints foo in
-% italics, not bold italics.
-%
-\def\setfontstyle#1{%
- \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
- \csname ten#1\endcsname % change the current font
-}
-
-% Select #1 fonts with the current style.
-%
-\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
-
-\def\rm{\fam=0 \setfontstyle{rm}}
-\def\it{\fam=\itfam \setfontstyle{it}}
-\def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
-\def\tt{\fam=\ttfam \setfontstyle{tt}}
+% Font-change commands.
% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf.
+% So we set up a \sf analogous to plain's \rm, etc.
\newfam\sffam
-\def\sf{\fam=\sffam \setfontstyle{sf}}
+\def\sf{\fam=\sffam \tensf}
\let\li = \sf % Sometimes we call it \li, not \sf.
-% We don't need math for this font style.
-\def\ttsl{\setfontstyle{ttsl}}
-
+% We don't need math for this one.
+\def\ttsl{\tenttsl}
% Default leading.
\newdimen\textleading \textleading = 13.2pt
@@ -1628,12 +1280,8 @@
\def\strutheightpercent{.70833}
\def\strutdepthpercent {.29167}
%
-% can get a sort of poor man's double spacing by redefining this.
-\def\baselinefactor{1}
-%
\def\setleading#1{%
- \dimen0 = #1\relax
- \normalbaselineskip = \baselinefactor\dimen0
+ \normalbaselineskip = #1\relax
\normallineskip = \lineskipfactor\normalbaselineskip
\normalbaselines
\setbox\strutbox =\hbox{%
@@ -1642,279 +1290,10 @@
}%
}
-% PDF CMaps. See also LaTeX's t1.cmap.
-%
-% do nothing with this by default.
-\expandafter\let\csname cmapOT1\endcsname\gobble
-\expandafter\let\csname cmapOT1IT\endcsname\gobble
-\expandafter\let\csname cmapOT1TT\endcsname\gobble
-
-% if we are producing pdf, and we have \pdffontattr, then define cmaps.
-% (\pdffontattr was introduced many years ago, but people still run
-% older pdftex's; it's easy to conditionalize, so we do.)
-\ifpdf \ifx\pdffontattr\undefined \else
- \begingroup
- \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
- \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1-0)
-%%Title: (TeX-OT1-0 TeX OT1 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1)
-/Supplement 0
->> def
-/CMapName /TeX-OT1-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-8 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<23> <26> <0023>
-<28> <3B> <0028>
-<3F> <5B> <003F>
-<5D> <5E> <005D>
-<61> <7A> <0061>
-<7B> <7C> <2013>
-endbfrange
-40 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <00660066>
-<0C> <00660069>
-<0D> <0066006C>
-<0E> <006600660069>
-<0F> <00660066006C>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<21> <0021>
-<22> <201D>
-<27> <2019>
-<3C> <00A1>
-<3D> <003D>
-<3E> <00BF>
-<5C> <201C>
-<5F> <02D9>
-<60> <2018>
-<7D> <02DD>
-<7E> <007E>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
- }\endgroup
- \expandafter\edef\csname cmapOT1\endcsname#1{%
- \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
- }%
-%
-% \cmapOT1IT
- \begingroup
- \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
- \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1IT-0)
-%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1IT)
-/Supplement 0
->> def
-/CMapName /TeX-OT1IT-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-8 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<25> <26> <0025>
-<28> <3B> <0028>
-<3F> <5B> <003F>
-<5D> <5E> <005D>
-<61> <7A> <0061>
-<7B> <7C> <2013>
-endbfrange
-42 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <00660066>
-<0C> <00660069>
-<0D> <0066006C>
-<0E> <006600660069>
-<0F> <00660066006C>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<21> <0021>
-<22> <201D>
-<23> <0023>
-<24> <00A3>
-<27> <2019>
-<3C> <00A1>
-<3D> <003D>
-<3E> <00BF>
-<5C> <201C>
-<5F> <02D9>
-<60> <2018>
-<7D> <02DD>
-<7E> <007E>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
- }\endgroup
- \expandafter\edef\csname cmapOT1IT\endcsname#1{%
- \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
- }%
-%
-% \cmapOT1TT
- \begingroup
- \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
- \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1TT-0)
-%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1TT)
-/Supplement 0
->> def
-/CMapName /TeX-OT1TT-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-5 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<21> <26> <0021>
-<28> <5F> <0028>
-<61> <7E> <0061>
-endbfrange
-32 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <2191>
-<0C> <2193>
-<0D> <0027>
-<0E> <00A1>
-<0F> <00BF>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<20> <2423>
-<27> <2019>
-<60> <2018>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
- }\endgroup
- \expandafter\edef\csname cmapOT1TT\endcsname#1{%
- \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
- }%
-\fi\fi
-
-
% Set the font macro #1 to the font named #2, adding on the
% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
-% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
-% empty to omit).
-\def\setfont#1#2#3#4#5{%
- \font#1=\fontprefix#2#3 scaled #4
- \csname cmap#5\endcsname#1%
-}
-% This is what gets called when #5 of \setfont is empty.
-\let\cmap\gobble
-% emacs-page end of cmaps
+% #3 is the font's design size, #4 is a scale factor
+\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
% Use cm as the default font prefix.
% To specify the font prefix, you must define \fontprefix
@@ -1939,297 +1318,110 @@
\def\scshape{csc}
\def\scbshape{csc}
-% Definitions for a main text size of 11pt. This is the default in
-% Texinfo.
-%
-\def\definetextfontsizexi{%
-% Text fonts (11.2pt, magstep1).
-\def\textnominalsize{11pt}
-\edef\mainmagstep{\magstephalf}
-\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
-\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
-\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
-\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
-\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
-\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
-\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\newcount\mainmagstep
+\ifx\bigger\relax
+ % not really supported.
+ \mainmagstep=\magstep1
+ \setfont\textrm\rmshape{12}{1000}
+ \setfont\texttt\ttshape{12}{1000}
+\else
+ \mainmagstep=\magstephalf
+ \setfont\textrm\rmshape{10}{\mainmagstep}
+ \setfont\texttt\ttshape{10}{\mainmagstep}
+\fi
+% Instead of cmb10, you may want to use cmbx10.
+% cmbx10 is a prettier font on its own, but cmb10
+% looks better when embedded in a line with cmr10
+% (in Bob's opinion).
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
\font\texti=cmmi10 scaled \mainmagstep
\font\textsy=cmsy10 scaled \mainmagstep
-\def\textecsize{1095}
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}{OT1}
-\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
-\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+% A few fonts for @defun, etc.
+\setfont\defbf\bxshape{10}{\magstep1} %was 1314
+\setfont\deftt\ttshape{10}{\magstep1}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}{OT1}
-\setfont\smalltt\ttshape{9}{1000}{OT1TT}
-\setfont\smallbf\bfshape{10}{900}{OT1}
-\setfont\smallit\itshape{9}{1000}{OT1IT}
-\setfont\smallsl\slshape{9}{1000}{OT1}
-\setfont\smallsf\sfshape{9}{1000}{OT1}
-\setfont\smallsc\scshape{10}{900}{OT1}
-\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
\font\smalli=cmmi9
\font\smallsy=cmsy9
-\def\smallecsize{0900}
% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}{OT1}
-\setfont\smallertt\ttshape{8}{1000}{OT1TT}
-\setfont\smallerbf\bfshape{10}{800}{OT1}
-\setfont\smallerit\itshape{8}{1000}{OT1IT}
-\setfont\smallersl\slshape{8}{1000}{OT1}
-\setfont\smallersf\sfshape{8}{1000}{OT1}
-\setfont\smallersc\scshape{10}{800}{OT1}
-\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
\font\smalleri=cmmi8
\font\smallersy=cmsy8
-\def\smallerecsize{0800}
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
-\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
-\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
-\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
-\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
-\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+% Fonts for title page:
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\setfont\titlesc\scbshape{10}{\magstep4}
\font\titlei=cmmi12 scaled \magstep3
\font\titlesy=cmsy10 scaled \magstep4
\def\authorrm{\secrm}
\def\authortt{\sectt}
-\def\titleecsize{2074}
% Chapter (and unnumbered) fonts (17.28pt).
-\def\chapnominalsize{17pt}
-\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
-\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
-\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
-\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
-\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
-\setfont\chapsf\sfbshape{17}{1000}{OT1}
+\setfont\chaprm\rmbshape{12}{\magstep2}
+\setfont\chapit\itbshape{10}{\magstep3}
+\setfont\chapsl\slbshape{10}{\magstep3}
+\setfont\chaptt\ttbshape{12}{\magstep2}
+\setfont\chapttsl\ttslshape{10}{\magstep3}
+\setfont\chapsf\sfbshape{17}{1000}
\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
+\setfont\chapsc\scbshape{10}{\magstep3}
\font\chapi=cmmi12 scaled \magstep2
\font\chapsy=cmsy10 scaled \magstep3
-\def\chapecsize{1728}
% Section fonts (14.4pt).
-\def\secnominalsize{14pt}
-\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
-\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
-\setfont\secsl\slbshape{10}{\magstep2}{OT1}
-\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
-\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
-\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
+\setfont\secrm\rmbshape{12}{\magstep1}
+\setfont\secit\itbshape{10}{\magstep2}
+\setfont\secsl\slbshape{10}{\magstep2}
+\setfont\sectt\ttbshape{12}{\magstep1}
+\setfont\secttsl\ttslshape{10}{\magstep2}
+\setfont\secsf\sfbshape{12}{\magstep1}
\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}{OT1}
+\setfont\secsc\scbshape{10}{\magstep2}
\font\seci=cmmi12 scaled \magstep1
\font\secsy=cmsy10 scaled \magstep2
-\def\sececsize{1440}
% Subsection fonts (13.15pt).
-\def\ssecnominalsize{13pt}
-\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
-\setfont\ssecit\itbshape{10}{1315}{OT1IT}
-\setfont\ssecsl\slbshape{10}{1315}{OT1}
-\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
-\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}
+\setfont\ssecit\itbshape{10}{1315}
+\setfont\ssecsl\slbshape{10}{1315}
+\setfont\ssectt\ttbshape{12}{\magstephalf}
+\setfont\ssecttsl\ttslshape{10}{1315}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}
\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}{OT1}
+\setfont\ssecsc\scbshape{10}{\magstep1}
\font\sseci=cmmi12 scaled \magstephalf
\font\ssecsy=cmsy10 scaled 1315
-\def\ssececsize{1200}
-
-% Reduced fonts for @acro in text (10pt).
-\def\reducednominalsize{10pt}
-\setfont\reducedrm\rmshape{10}{1000}{OT1}
-\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
-\setfont\reducedbf\bfshape{10}{1000}{OT1}
-\setfont\reducedit\itshape{10}{1000}{OT1IT}
-\setfont\reducedsl\slshape{10}{1000}{OT1}
-\setfont\reducedsf\sfshape{10}{1000}{OT1}
-\setfont\reducedsc\scshape{10}{1000}{OT1}
-\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
-\font\reducedi=cmmi10
-\font\reducedsy=cmsy10
-\def\reducedecsize{1000}
-
-% reset the current fonts
-\textfonts
-\rm
-} % end of 11pt text font size definitions
-
-
-% Definitions to make the main text be 10pt Computer Modern, with
-% section, chapter, etc., sizes following suit. This is for the GNU
-% Press printing of the Emacs 22 manual. Maybe other manuals in the
-% future. Used with @smallbook, which sets the leading to 12pt.
-%
-\def\definetextfontsizex{%
-% Text fonts (10pt).
-\def\textnominalsize{10pt}
-\edef\mainmagstep{1000}
-\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
-\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
-\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
-\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
-\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
-\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
-\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-\def\textecsize{1000}
-
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
-\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
-\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}{OT1}
-\setfont\smalltt\ttshape{9}{1000}{OT1TT}
-\setfont\smallbf\bfshape{10}{900}{OT1}
-\setfont\smallit\itshape{9}{1000}{OT1IT}
-\setfont\smallsl\slshape{9}{1000}{OT1}
-\setfont\smallsf\sfshape{9}{1000}{OT1}
-\setfont\smallsc\scshape{10}{900}{OT1}
-\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-\def\smallecsize{0900}
-
-% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}{OT1}
-\setfont\smallertt\ttshape{8}{1000}{OT1TT}
-\setfont\smallerbf\bfshape{10}{800}{OT1}
-\setfont\smallerit\itshape{8}{1000}{OT1IT}
-\setfont\smallersl\slshape{8}{1000}{OT1}
-\setfont\smallersf\sfshape{8}{1000}{OT1}
-\setfont\smallersc\scshape{10}{800}{OT1}
-\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-\def\smallerecsize{0800}
-
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
-\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
-\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
-\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
-\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
-\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
-\def\titleecsize{2074}
-
-% Chapter fonts (14.4pt).
-\def\chapnominalsize{14pt}
-\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
-\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
-\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
-\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
-\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
-\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
-\let\chapbf\chaprm
-\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
-\font\chapi=cmmi12 scaled \magstep1
-\font\chapsy=cmsy10 scaled \magstep2
-\def\chapecsize{1440}
-
-% Section fonts (12pt).
-\def\secnominalsize{12pt}
-\setfont\secrm\rmbshape{12}{1000}{OT1}
-\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
-\setfont\secsl\slbshape{10}{\magstep1}{OT1}
-\setfont\sectt\ttbshape{12}{1000}{OT1TT}
-\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
-\setfont\secsf\sfbshape{12}{1000}{OT1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep1}{OT1}
-\font\seci=cmmi12
-\font\secsy=cmsy10 scaled \magstep1
-\def\sececsize{1200}
-
-% Subsection fonts (10pt).
-\def\ssecnominalsize{10pt}
-\setfont\ssecrm\rmbshape{10}{1000}{OT1}
-\setfont\ssecit\itbshape{10}{1000}{OT1IT}
-\setfont\ssecsl\slbshape{10}{1000}{OT1}
-\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
-\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
-\setfont\ssecsf\sfbshape{10}{1000}{OT1}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1000}{OT1}
-\font\sseci=cmmi10
-\font\ssecsy=cmsy10
-\def\ssececsize{1000}
-
-% Reduced fonts for @acro in text (9pt).
-\def\reducednominalsize{9pt}
-\setfont\reducedrm\rmshape{9}{1000}{OT1}
-\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
-\setfont\reducedbf\bfshape{10}{900}{OT1}
-\setfont\reducedit\itshape{9}{1000}{OT1IT}
-\setfont\reducedsl\slshape{9}{1000}{OT1}
-\setfont\reducedsf\sfshape{9}{1000}{OT1}
-\setfont\reducedsc\scshape{10}{900}{OT1}
-\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
-\font\reducedi=cmmi9
-\font\reducedsy=cmsy9
-\def\reducedecsize{0900}
-
-% reduce space between paragraphs
-\divide\parskip by 2
-
-% reset the current fonts
-\textfonts
-\rm
-} % end of 10pt text font size definitions
-
-
-% We provide the user-level command
-% @fonttextsize 10
-% (or 11) to redefine the text font size. pt is assumed.
-%
-\def\xword{10}
-\def\xiword{11}
-%
-\parseargdef\fonttextsize{%
- \def\textsizearg{#1}%
- \wlog{doing @fonttextsize \textsizearg}%
- %
- % Set \globaldefs so that documents can use this inside @tex, since
- % makeinfo 4.8 does not support it, but we need it nonetheless.
- %
- \begingroup \globaldefs=1
- \ifx\textsizearg\xword \definetextfontsizex
- \else \ifx\textsizearg\xiword \definetextfontsizexi
- \else
- \errhelp=\EMsimple
- \errmessage{ fonttextsize only supports `10' or `11', not `\textsizearg'}
- \fi\fi
- \endgroup
-}
-
+% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
+% but that is not a standard magnification.
% In order for the font changes to affect most math symbols and letters,
% we have to define the \textfont of the standard families. Since
@@ -2244,81 +1436,50 @@
}
% The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE. We do this because \STYLE needs to also set the
-% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire
-% \tenSTYLE to set the current font.
-%
-% Each font-changing command also sets the names \lsize (one size lower)
-% and \lllsize (three sizes lower). These relative commands are used in
-% the LaTeX logo and acronyms.
-%
-% This all needs generalizing, badly.
-%
+% of just \STYLE. We do this so that font changes will continue to work
+% in math mode, where it is the current \fam that is relevant in most
+% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
+% \tenbf}, for example. By redefining \tenbf, we obviate the need to
+% redefine \bf itself.
\def\textfonts{%
\let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
- \let\tenttsl=\textttsl
- \def\curfontsize{text}%
- \def\lsize{reduced}\def\lllsize{smaller}%
+ \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
\resetmathfonts \setleading{\textleading}}
\def\titlefonts{%
\let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
\let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
\let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
\let\tenttsl=\titlettsl
- \def\curfontsize{title}%
- \def\lsize{chap}\def\lllsize{subsec}%
\resetmathfonts \setleading{25pt}}
\def\titlefont#1{{\titlefonts\rm #1}}
\def\chapfonts{%
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
- \let\tenttsl=\chapttsl
- \def\curfontsize{chap}%
- \def\lsize{sec}\def\lllsize{text}%
+ \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
\resetmathfonts \setleading{19pt}}
\def\secfonts{%
\let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
\let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
- \let\tenttsl=\secttsl
- \def\curfontsize{sec}%
- \def\lsize{subsec}\def\lllsize{reduced}%
+ \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
\resetmathfonts \setleading{16pt}}
\def\subsecfonts{%
\let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
\let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
- \let\tenttsl=\ssecttsl
- \def\curfontsize{ssec}%
- \def\lsize{text}\def\lllsize{small}%
+ \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
\resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts
-\def\reducedfonts{%
- \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
- \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
- \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
- \let\tenttsl=\reducedttsl
- \def\curfontsize{reduced}%
- \def\lsize{small}\def\lllsize{smaller}%
- \resetmathfonts \setleading{10.5pt}}
+\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
\def\smallfonts{%
\let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
\let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
\let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
\let\tenttsl=\smallttsl
- \def\curfontsize{small}%
- \def\lsize{smaller}\def\lllsize{smaller}%
\resetmathfonts \setleading{10.5pt}}
\def\smallerfonts{%
\let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
\let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
\let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
\let\tenttsl=\smallerttsl
- \def\curfontsize{smaller}%
- \def\lsize{smaller}\def\lllsize{smaller}%
\resetmathfonts \setleading{9.5pt}}
% Set the fonts to use with the @small... environments.
@@ -2327,7 +1488,7 @@
% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
% can fit this many characters:
% 8.5x11=86 smallbook=72 a4=90 a5=69
-% If we use \scriptfonts (8pt), then we can fit this many characters:
+% If we use \smallerfonts (8pt), then we can fit this many characters:
% 8.5x11=90+ smallbook=80 a4=90+ a5=77
% For me, subjectively, the few extra characters that fit aren't worth
% the additional smallness of 8pt. So I'm making the default 9pt.
@@ -2335,13 +1496,14 @@
% By the way, for comparison, here's what fits with @example (10pt):
% 8.5x11=71 smallbook=60 a4=75 a5=58
%
-% I wish the USA used A4 paper.
+% I wish we used A4 paper on this side of the Atlantic.
+%
% --karl, 24jan03.
% Set up the default fonts, so we can use them for creating boxes.
%
-\definetextfontsizexi
+\textfonts
% Define these so they can be easily changed for other fonts.
\def\angleleft{$\langle$}
@@ -2351,10 +1513,10 @@
\newcount\fontdepth \fontdepth=0
% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}{OT1}
-\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}{OT1}
-\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+\setfont\shortcontrm\rmshape{12}{1000}
+\setfont\shortcontbf\bxshape{12}{1000}
+\setfont\shortcontsl\slshape{12}{1000}
+\setfont\shortconttt\ttshape{12}{1000}
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
%% serif) and @ii for TeX italic
@@ -2366,27 +1528,15 @@
\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
-% like \smartslanted except unconditionally uses \ttsl.
-% @var is set to this for defun arguments.
-\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
-
-% like \smartslanted except unconditionally use \sl. We never want
-% ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
-
\let\i=\smartitalic
-\let\slanted=\smartslanted
\let\var=\smartslanted
\let\dfn=\smartslanted
\let\emph=\smartitalic
+\let\cite=\smartslanted
-% @b, explicit bold.
\def\b#1{{\bf #1}}
\let\strong=\b
-% @sansserif, explicit sans.
-\def\sansserif#1{{\sf #1}}
-
% We can't just use \exhyphenpenalty, because that only has effect at
% the end of a paragraph. Restore normal hyphenation at the end of the
% group within which \nohyphenation is presumably called.
@@ -2399,25 +1549,19 @@
% sometimes \x has an active definition that messes things up.
%
\catcode` =11
- \def\plainfrenchspacing{%
+ \def\frenchspacing{%
\sfcode\dotChar =\ m \sfcode\questChar=\ m \sfcode\exclamChar=\ m
\sfcode\colonChar=\ m \sfcode\semiChar =\ m \sfcode\commaChar =\ m
- \def\endofsentencespacefactor{1000}% for @. and friends
- }
- \def\plainnonfrenchspacing{%
- \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
- \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
- \def\endofsentencespacefactor{3000}% for @. and friends
}
\catcode` =\other
-\def\endofsentencespacefactor{3000}% default
\def\t#1{%
- {\tt \rawbackslash \plainfrenchspacing #1}%
+ {\tt \rawbackslash \frenchspacing #1}%
\null
}
+\let\ttfont=\t
\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}{OT1}
+\setfont\keyrm\rmshape{8}{1000}
\font\keysy=cmsy9
\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
\raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
@@ -2425,7 +1569,6 @@
\hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
\kern-0.4pt\hrule}%
\kern-.06em\raise0.4pt\hbox{\angleright}}}}
-\def\key #1{{\nohyphenation \uppercase{#1}}\null}
% The old definition, with no lozenge:
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
@@ -2451,13 +1594,13 @@
\nohyphenation
%
\rawbackslash
- \plainfrenchspacing
+ \frenchspacing
#1%
}%
\null
}
-% We *must* turn on hyphenation at `-' and `_' in @code.
+% We *must* turn on hyphenation at `-' and `_' in \code.
% Otherwise, it is too hard to avoid overfull hboxes
% in the Emacs manual, the Library manual, etc.
@@ -2467,23 +1610,18 @@
% and arrange explicitly to hyphenate at a dash.
% -- rms.
{
- \catcode`\-=\active \catcode`\_=\active
- \catcode`\'=\active \catcode`\`=\active
+ \catcode`\-=\active
+ \catcode`\_=\active
%
\global\def\code{\begingroup
- \catcode\rquoteChar=\active \catcode\lquoteChar=\active
- \let'\codequoteright \let`\codequoteleft
- %
- \catcode\dashChar=\active \catcode\underChar=\active
- \ifallowcodebreaks
- \let-\codedash
- \let_\codeunder
- \else
- \let-\realdash
- \let_\realunder
- \fi
+ \catcode`\-=\active \let-\codedash
+ \catcode`\_=\active \let_\codeunder
\codex
}
+ %
+ % If we end up with any active - characters when handling the index,
+ % just treat them as a normal -.
+ \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
}
\def\realdash{-}
@@ -2501,45 +1639,24 @@
}
\def\codex #1{\tclose{#1}\endgroup}
-% An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__. This is undesirable in
-% some manuals, especially if they don't have long identifiers in
-% general. @allowcodebreaks provides a way to control this.
-%
-\newif\ifallowcodebreaks \allowcodebreakstrue
-
-\def\keywordtrue{true}
-\def\keywordfalse{false}
-
-\parseargdef\allowcodebreaks{%
- \def\txiarg{#1}%
- \ifx\txiarg\keywordtrue
- \allowcodebreakstrue
- \else\ifx\txiarg\keywordfalse
- \allowcodebreaksfalse
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
- \fi\fi
-}
-
% @kbd is like @code, except that if the argument is just one @key command,
% then @kbd has no effect.
% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
% `example' (@kbd uses ttsl only inside of @example and friends),
% or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
- \def\txiarg{#1}%
- \ifx\txiarg\worddistinct
+\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
+\def\kbdinputstylexxx#1{%
+ \def\arg{#1}%
+ \ifx\arg\worddistinct
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\txiarg\wordexample
+ \else\ifx\arg\wordexample
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\txiarg\wordcode
+ \else\ifx\arg\wordcode
\gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
\else
\errhelp = \EMsimple
- \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
+ \errmessage{Unknown @kbdinputstyle option `\arg'}%
\fi\fi\fi
}
\def\worddistinct{distinct}
@@ -2555,8 +1672,8 @@
\else{\tclose{\kbdfont\look}}\fi
\else{\tclose{\kbdfont\look}}\fi}
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
+% For @url, @env, @command quotes seem unnecessary, so use \code.
+\let\url=\code
\let\env=\code
\let\command=\code
@@ -2588,10 +1705,6 @@
\endlink
\endgroup}
-% @url synonym for @uref, since that's how everyone uses it.
-%
-\let\url=\uref
-
% rms does not like angle brackets --karl, 17may97.
% So now @email is just like @uref, unless we are pdf.
%
@@ -2633,140 +1746,22 @@
\def\sc#1{{\smallcaps#1}} % smallcaps font
\def\ii#1{{\it #1}} % italic font
-% @acronym for "FBI", "NATO", and the like.
-% We print this one point size smaller, since it's intended for
-% all-uppercase.
-%
-\def\acronym#1{\doacronym #1,,\finish}
-\def\doacronym#1,#2,#3\finish{%
- {\selectfonts\lsize #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
-}
-
-% @abbr for "Comput. J." and the like.
-% No font change, but don't do end-of-sentence spacing.
-%
-\def\abbr#1{\doabbr #1,,\finish}
-\def\doabbr#1,#2,#3\finish{%
- {\plainfrenchspacing #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
-}
+% @acronym downcases the argument and prints in smallcaps.
+\def\acronym#1{{\smallcaps \lowercase{#1}}}
-% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
-%
+% @pounds{} is a sterling sign.
\def\pounds{{\it\$}}
-% @euro{} comes from a separate font, depending on the current style.
-% We use the free feym* fonts from the eurosym package by Henrik
-% Theiling, which support regular, slanted, bold and bold slanted (and
-% "outlined" (blackboard board, sort of) versions, which we don't need).
-% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-%
-% Although only regular is the truly official Euro symbol, we ignore
-% that. The Euro is designed to be slightly taller than the regular
-% font height.
-%
-% feymr - regular
-% feymo - slanted
-% feybr - bold
-% feybo - bold slanted
-%
-% There is no good (free) typewriter version, to my knowledge.
-% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
-% Hmm.
-%
-% Also doesn't work in math. Do we need to do math with euro symbols?
-% Hope not.
-%
-%
-\def\euro{{\eurofont e}}
-\def\eurofont{%
- % We set the font at each command, rather than predefining it in
- % \textfonts and the other font-switching commands, so that
- % installations which never need the symbol don't have to have the
- % font installed.
- %
- % There is only one designed size (nominal 10pt), so we always scale
- % that to the current nominal size.
- %
- % By the way, simply using "at 1em" works for cmr10 and the like, but
- % does not work for cmbx10 and other extended/shrunken fonts.
- %
- \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
- %
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
- \else
- % regular:
- \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
- \fi
- \thiseurofont
-}
-
-% Hacks for glyphs from the EC fonts similar to \euro. We don't
-% use \let for the aliases, because sometimes we redefine the original
-% macro, and the alias should reflect the redefinition.
-\def\guillemetleft{{\ecfont \char"13}}
-\def\guillemotleft{\guillemetleft}
-\def\guillemetright{{\ecfont \char"14}}
-\def\guillemotright{\guillemetright}
-\def\guilsinglleft{{\ecfont \char"0E}}
-\def\guilsinglright{{\ecfont \char"0F}}
-\def\quotedblbase{{\ecfont \char"12}}
-\def\quotesinglbase{{\ecfont \char"0D}}
-%
-\def\ecfont{%
- % We can't distinguish serif/sanserif and italic/slanted, but this
- % is used for crude hacks anyway (like adding French and German
- % quotes to documents typeset with CM, where we lose kerning), so
- % hopefully nobody will notice/care.
- \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
- \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
- \else
- % regular:
- \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
- \fi
- \thisecfont
-}
-
-% @registeredsymbol - R in a circle. The font for the R should really
-% be smaller yet, but lllsize is the best we can do for now.
+% @registeredsymbol - R in a circle. For now, only works in text size;
+% we'd have to redo the font mechanism to change the \scriptstyle and
+% \scriptscriptstyle font sizes to make it look right in headings.
% Adapted from the plain.tex definition of \copyright.
%
\def\registeredsymbol{%
- $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
- \hfil\crcr\Orb}}%
+ $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}%
}$%
}
-% @textdegree - the normal degrees sign.
-%
-\def\textdegree{$^\circ$}
-
-% Laurent Siebenmann reports \Orb undefined with:
-% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
-% so we'll define it if necessary.
-%
-\ifx\Orb\undefined
-\def\Orb{\mathhexbox20D}
-\fi
-
-% Quotes.
-\chardef\quotedblleft="5C
-\chardef\quotedblright=`\"
-\chardef\quoteleft=`\`
-\chardef\quoteright=`\'
-
\message{page headings,}
@@ -2785,103 +1780,87 @@
\newif\ifsetshortcontentsaftertitlepage
\let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+\def\shorttitlepage{\parsearg\shorttitlepagezzz}
+\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
\endgroup\page\hbox{}\page}
-\envdef\titlepage{%
- % Open one extra group, as we want to close it in the middle of \Etitlepage.
- \begingroup
- \parindent=0pt \textfonts
- % Leave some space at the very top of the page.
- \vglue\titlepagetopglue
- % No rule at page bottom unless we print one at the top with @title.
- \finishedtitlepagetrue
- %
- % Most title ``pages'' are actually two pages long, with space
- % at the top of the second. We don't want the ragged left on the second.
- \let\oldpage = \page
- \def\page{%
+\def\titlepage{\begingroup \parindent=0pt \textfonts
+ \let\subtitlerm=\tenrm
+ \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
+ %
+ \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
+ \let\tt=\authortt}%
+ %
+ % Leave some space at the very top of the page.
+ \vglue\titlepagetopglue
+ %
+ % Now you can print the title using @title.
+ \def\title{\parsearg\titlezzz}%
+ \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
+ % print a rule at the page bottom also.
+ \finishedtitlepagefalse
+ \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
+ % No rule at page bottom unless we print one at the top with @title.
+ \finishedtitlepagetrue
+ %
+ % Now you can put text using @subtitle.
+ \def\subtitle{\parsearg\subtitlezzz}%
+ \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
+ %
+ % @author should come last, but may come many times.
+ \def\author{\parsearg\authorzzz}%
+ \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
+ {\authorfont \leftline{##1}}}%
+ %
+ % Most title ``pages'' are actually two pages long, with space
+ % at the top of the second. We don't want the ragged left on the second.
+ \let\oldpage = \page
+ \def\page{%
\iffinishedtitlepage\else
- \finishtitlepage
+ \finishtitlepage
\fi
+ \oldpage
\let\page = \oldpage
- \page
- \null
- }%
+ \hbox{}}%
+% \def\page{\oldpage \hbox{}}
}
\def\Etitlepage{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- % It is important to do the page break before ending the group,
- % because the headline and footline are only empty inside the group.
- % If we use the new definition of \page, we always get a blank page
- % after the title page, which we certainly don't want.
- \oldpage
- \endgroup
- %
- % Need this before the \...aftertitlepage checks so that if they are
- % in effect the toc pages will come out with page numbers.
- \HEADINGSon
- %
- % If they want short, they certainly want long too.
- \ifsetshortcontentsaftertitlepage
- \shortcontents
- \contents
- \global\let\shortcontents = \relax
- \global\let\contents = \relax
- \fi
- %
- \ifsetcontentsaftertitlepage
- \contents
- \global\let\contents = \relax
- \global\let\shortcontents = \relax
- \fi
+ \iffinishedtitlepage\else
+ \finishtitlepage
+ \fi
+ % It is important to do the page break before ending the group,
+ % because the headline and footline are only empty inside the group.
+ % If we use the new definition of \page, we always get a blank page
+ % after the title page, which we certainly don't want.
+ \oldpage
+ \endgroup
+ %
+ % Need this before the \...aftertitlepage checks so that if they are
+ % in effect the toc pages will come out with page numbers.
+ \HEADINGSon
+ %
+ % If they want short, they certainly want long too.
+ \ifsetshortcontentsaftertitlepage
+ \shortcontents
+ \contents
+ \global\let\shortcontents = \relax
+ \global\let\contents = \relax
+ \fi
+ %
+ \ifsetcontentsaftertitlepage
+ \contents
+ \global\let\contents = \relax
+ \global\let\shortcontents = \relax
+ \fi
}
\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt width \hsize
- \vskip\titlepagebottomglue
- \finishedtitlepagetrue
-}
-
-%%% Macros to be used within @titlepage:
-
-\let\subtitlerm=\tenrm
-\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
- \let\tt=\authortt}
-
-\parseargdef\title{%
- \checkenv\titlepage
- \leftline{\titlefonts\rm #1}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt
-}
-
-\parseargdef\subtitle{%
- \checkenv\titlepage
- {\subtitlefont \rightline{#1}}%
-}
-
-% @author should come last, but may come many times.
-% It can also be used inside @quotation.
-%
-\parseargdef\author{%
- \def\temp{\quotation}%
- \ifx\thisenv\temp
- \def\quotationauthor{#1}% printed in \Equotation.
- \else
- \checkenv\titlepage
- \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
- {\authorfont \leftline{#1}}%
- \fi
+ \vskip4pt \hrule height 2pt width \hsize
+ \vskip\titlepagebottomglue
+ \finishedtitlepagetrue
}
-
%%% Set up page headings and footings.
\let\thispage=\folio
@@ -2891,7 +1870,7 @@
\newtoks\evenfootline % footline on even pages
\newtoks\oddfootline % footline on odd pages
-% Now make TeX use those variables
+% Now make Tex use those variables
\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
\else \the\evenheadline \fi}}
\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
@@ -2905,64 +1884,43 @@
% @evenfooting @thisfile||
% @oddfooting ||@thisfile
-
\def\evenheading{\parsearg\evenheadingxxx}
-\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
-\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\everyheading{\parsearg\everyheadingxxx}
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\everyfooting{\parsearg\everyfootingxxx}
+
+{\catcode`\ =0 %
+
+\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
+\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
-\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
+\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
-\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
+\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
-\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
+\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
\global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
%
% Leave some space for the footline. Hopefully ok to assume
% @evenfooting will not be used by itself.
- \global\advance\pageheight by -12pt
- \global\advance\vsize by -12pt
+ \global\advance\pageheight by -\baselineskip
+ \global\advance\vsize by -\baselineskip
}
-\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-
-% @evenheadingmarks top \thischapter <- chapter at the top of a page
-% @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page
+\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
%
-% The same set of arguments for:
-%
-% @oddheadingmarks
-% @evenfootingmarks
-% @oddfootingmarks
-% @everyheadingmarks
-% @everyfootingmarks
-
-\def\evenheadingmarks{\headingmarks{even}{heading}}
-\def\oddheadingmarks{\headingmarks{odd}{heading}}
-\def\evenfootingmarks{\headingmarks{even}{footing}}
-\def\oddfootingmarks{\headingmarks{odd}{footing}}
-\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
- \headingmarks{odd}{heading}{#1} }
-\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
- \headingmarks{odd}{footing}{#1} }
-% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
-\def\headingmarks#1#2#3 {%
- \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
- \global\expandafter\let\csname get#1#2marks\endcsname \temp
-}
-
-\everyheadingmarks bottom
-\everyfootingmarks bottom
+}% unbind the catcode of @.
% @headings double turns headings on for double-sided printing.
% @headings single turns headings on for single-sided printing.
@@ -2976,7 +1934,7 @@
\def\headings #1 {\csname HEADINGS#1\endcsname}
-\def\HEADINGSoff{%
+\def\HEADINGSoff{
\global\evenheadline={\hfil} \global\evenfootline={\hfil}
\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
\HEADINGSoff
@@ -2985,7 +1943,7 @@
% chapter name on inside top of right hand pages, document
% title on inside top of left hand pages, and page numbers on outside top
% edge of all pages.
-\def\HEADINGSdouble{%
+\def\HEADINGSdouble{
\global\pageno=1
\global\evenfootline={\hfil}
\global\oddfootline={\hfil}
@@ -2997,7 +1955,7 @@
% For single-sided printing, chapter title goes across top left of page,
% page number on top right.
-\def\HEADINGSsingle{%
+\def\HEADINGSsingle{
\global\pageno=1
\global\evenfootline={\hfil}
\global\oddfootline={\hfil}
@@ -3044,11 +2002,12 @@
% @settitle line... specifies the title of the document, for headings.
% It generates no output of its own.
\def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg{\gdef\thistitle}}
+\def\settitle{\parsearg\settitlezzz}
+\def\settitlezzz #1{\gdef\thistitle{#1}}
\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x).
+% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
% default indentation of table text
\newdimen\tableindent \tableindent=.8in
@@ -3060,7 +2019,7 @@
% used internally for \itemindent minus \itemmargin
\newdimen\itemmax
-% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
% these defs.
% They also define \itemindex
% to index the item name in whatever manner is desired (perhaps none).
@@ -3072,10 +2031,22 @@
\def\internalBitem{\smallbreak \parsearg\itemzzz}
\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
+\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
+
+\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
+\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
+
+\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
+ \itemzzz {#1}}
+
+\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
+ \itemzzz {#1}}
+
\def\itemzzz #1{\begingroup %
\advance\hsize by -\rightskip
\advance\hsize by -\tableindent
- \setbox0=\hbox{\itemindicate{#1}}%
+ \setbox0=\hbox{\itemfont{#1}}%
\itemindex{#1}%
\nobreak % This prevents a break before @itemx.
%
@@ -3099,13 +2070,17 @@
% \parskip glue -- logically it's part of the @item we just started.
\nobreak \vskip-\parskip
%
- % Stop a page break at the \parskip glue coming up. However, if
- % what follows is an environment such as @example, there will be no
- % \parskip glue; then the negative vskip we just inserted would
- % cause the example and the item to crash together. So we use this
- % bizarre value of 10001 as a signal to \aboveenvbreak to insert
- % \parskip glue after all. Section titles are handled this way also.
- %
+ % Stop a page break at the \parskip glue coming up. (Unfortunately
+ % we can't prevent a possible page break at the following
+ % \baselineskip glue.) However, if what follows is an environment
+ % such as @example, there will be no \parskip glue; then
+ % the negative vskip we just would cause the example and the item to
+ % crash together. So we use this bizarre value of 10001 as a signal
+ % to \aboveenvbreak to insert \parskip glue after all.
+ % (Possibly there are other commands that could be followed by
+ % @example which need the same treatment, but not section titles; or
+ % maybe section titles are the only special case and they should be
+ % penalty 10001...)
\penalty 10001
\endgroup
\itemxneedsnegativevskipfalse
@@ -3125,72 +2100,81 @@
\fi
}
-\def\item{\errmessage{ item while not in a list environment}}
-\def\itemx{\errmessage{ itemx while not in a list environment}}
+\def\item{\errmessage{ item while not in a table}}
+\def\itemx{\errmessage{ itemx while not in a table}}
+\def\kitem{\errmessage{ kitem while not in a table}}
+\def\kitemx{\errmessage{ kitemx while not in a table}}
+\def\xitem{\errmessage{ xitem while not in a table}}
+\def\xitemx{\errmessage{ xitemx while not in a table}}
+
+% Contains a kludge to get @end[description] to work.
+\def\description{\tablez{\dontindex}{1}{}{}{}{}}
% @table, @ftable, @vtable.
-\envdef\table{%
- \let\itemindex\gobble
- \tablecheck{table}%
-}
-\envdef\ftable{%
- \def\itemindex ##1{\doind {fn}{\code{##1}}}%
- \tablecheck{ftable}%
-}
-\envdef\vtable{%
- \def\itemindex ##1{\doind {vr}{\code{##1}}}%
- \tablecheck{vtable}%
-}
-\def\tablecheck#1{%
- \ifnum \the\catcode`\^^M=\active
- \endgroup
- \errmessage{This command won't work in this context; perhaps the problem is
- that we are \inenvironment\thisenv}%
- \def\next{\doignore{#1}}%
- \else
- \let\next\tablex
- \fi
- \next
-}
-\def\tablex#1{%
- \def\itemindicate{#1}%
- \parsearg\tabley
-}
-\def\tabley#1{%
- {%
- \makevalueexpandable
- \edef\temp{\noexpand\tablez #1\space\space\space}%
- \expandafter
- }\temp \endtablez
+\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
+{\obeylines\obeyspaces%
+\gdef\tablex #1^^M{%
+\tabley\dontindex#1 \endtabley}}
+
+\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
+{\obeylines\obeyspaces%
+\gdef\ftablex #1^^M{%
+\tabley\fnitemindex#1 \endtabley
+\def\Eftable{\endgraf\afterenvbreak\endgroup}%
+\let\Etable=\relax}}
+
+\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
+{\obeylines\obeyspaces%
+\gdef\vtablex #1^^M{%
+\tabley\vritemindex#1 \endtabley
+\def\Evtable{\endgraf\afterenvbreak\endgroup}%
+\let\Etable=\relax}}
+
+\def\dontindex #1{}
+\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
+\def\vritemindex #1{\doind {vr}{\code{#1}}}%
+
+{\obeyspaces %
+\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
+\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
+
+\def\tablez #1#2#3#4#5#6{%
+\aboveenvbreak %
+\begingroup %
+\def\Edescription{\Etable}% Necessary kludge.
+\let\itemindex=#1%
+\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
+\ifnum 0#4>0 \tableindent=#4\mil \fi %
+\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
+\def\itemfont{#2}%
+\itemmax=\tableindent %
+\advance \itemmax by -\itemmargin %
+\advance \leftskip by \tableindent %
+\exdentamount=\tableindent
+\parindent = 0pt
+\parskip = \smallskipamount
+\ifdim \parskip=0pt \parskip=2pt \fi%
+\def\Etable{\endgraf\afterenvbreak\endgroup}%
+\let\item = \internalBitem %
+\let\itemx = \internalBitemx %
+\let\kitem = \internalBkitem %
+\let\kitemx = \internalBkitemx %
+\let\xitem = \internalBxitem %
+\let\xitemx = \internalBxitemx %
}
-\def\tablez #1 #2 #3 #4\endtablez{%
- \aboveenvbreak
- \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
- \ifnum 0#2>0 \tableindent=#2\mil \fi
- \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
- \itemmax=\tableindent
- \advance \itemmax by -\itemmargin
- \advance \leftskip by \tableindent
- \exdentamount=\tableindent
- \parindent = 0pt
- \parskip = \smallskipamount
- \ifdim \parskip=0pt \parskip=2pt \fi
- \let\item = \internalBitem
- \let\itemx = \internalBitemx
-}
-\def\Etable{\endgraf\afterenvbreak}
-\let\Eftable\Etable
-\let\Evtable\Etable
-\let\Eitemize\Etable
-\let\Eenumerate\Etable
% This is the counter used by @enumerate, which is really @itemize
\newcount \itemno
-\envdef\itemize{\parsearg\doitemize}
+\def\itemize{\parsearg\itemizezzz}
+
+\def\itemizezzz #1{%
+ \begingroup % ended by the @end itemize
+ \itemizey {#1}{\Eitemize}
+}
-\def\doitemize#1{%
+\def\itemizey#1#2{%
\aboveenvbreak
\itemmax=\itemindent
\advance\itemmax by -\itemmargin
@@ -3199,33 +2183,13 @@
\parindent=0pt
\parskip=\smallskipamount
\ifdim\parskip=0pt \parskip=2pt \fi
+ \def#2{\endgraf\afterenvbreak\endgroup}%
\def\itemcontents{#1}%
% @itemize with no arg is equivalent to @itemize @bullet.
\ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
\let\item=\itemizeitem
}
-% Definition of @item while inside @itemize and @enumerate.
-%
-\def\itemizeitem{%
- \advance\itemno by 1 % for enumerations
- {\let\par=\endgraf \smallbreak}% reasonable place to break
- {%
- % If the document has an @itemize directly after a section title, a
- % \nobreak will be last on the list, and \sectionheading will have
- % done a \vskip-\parskip. In that case, we don't want to zero
- % parskip, or the item text will crash with the heading. On the
- % other hand, when there is normal text preceding the item (as there
- % usually is), we do want to zero parskip, or there would be too much
- % space. In that case, we won't have a \nobreak before. At least
- % that's the theory.
- \ifnum\lastpenalty<10000 \parskip=0in \fi
- \noindent
- \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
- \vadjust{\penalty 1200}}% not good to break after first line of item.
- \flushcr
-}
-
% \splitoff TOKENS\endmark defines \first to be the first token in
% TOKENS, and \rest to be the remainder.
%
@@ -3235,8 +2199,11 @@
% or number, to specify the first label in the enumerated list. No
% argument is the same as `1'.
%
-\envparseargdef\enumerate{\enumeratey #1 \endenumeratey}
+\def\enumerate{\parsearg\enumeratezzz}
+\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
\def\enumeratey #1 #2\endenumeratey{%
+ \begingroup % ended by the @end enumerate
+ %
% If we were given no argument, pretend we were given `1'.
\def\thearg{#1}%
\ifx\thearg\empty \def\thearg{1}\fi
@@ -3307,13 +2274,13 @@
}%
}
-% Call \doitemize, adding a period to the first argument and supplying the
+% Call itemizey, adding a period to the first argument and supplying the
% common last two arguments. Also subtract one from the initial value in
% \itemno, since @item increments \itemno.
%
\def\startenumeration#1{%
\advance\itemno by -1
- \doitemize{#1.}\flushcr
+ \itemizey{#1.}\Eenumerate\flushcr
}
% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
@@ -3324,6 +2291,16 @@
\def\Ealphaenumerate{\Eenumerate}
\def\Ecapsenumerate{\Eenumerate}
+% Definition of @item while inside @itemize.
+
+\def\itemizeitem{%
+\advance\itemno by 1
+{\let\par=\endgraf \smallbreak}%
+\ifhmode \errmessage{In hmode at itemizeitem}\fi
+{\parskip=0in \hskip 0pt
+\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
+\vadjust{\penalty 1200}}%
+\flushcr}
% @multitable macros
% Amy Hendrickson, 8/18/94, 3/6/96
@@ -3350,14 +2327,24 @@
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item ...
% using the widest term desired in each column.
+%
+% For those who want to use more than one line's worth of words in
+% the preamble, break the line within one argument and it
+% will parse correctly, i.e.,
+%
+% @multitable {Column 1 template} {Column 2 template} {Column 3
+% template}
+% Not:
+% @multitable {Column 1 template} {Column 2 template}
+% {Column 3 template}
% Each new table line starts with @item, each subsequent new column
% starts with @tab. Empty columns may be produced by supplying @tab's
% with nothing between them for as many times as empty columns are needed,
% ie, @tab tab@tab will produce two empty columns.
-% @item, @tab do not need to be on their own lines, but it will not hurt
-% if they are.
+% @item, @tab, @multitable or @end multitable do not need to be on their
+% own lines, but it will not hurt if they are.
% Sample multitable:
@@ -3401,12 +2388,13 @@
\def\xcolumnfractions{\columnfractions}
\newif\ifsetpercent
-% #1 is the @columnfraction, usually a decimal number like .5, but might
-% be just 1. We just use it, whatever it is.
-%
-\def\pickupwholefraction#1 {%
+% #1 is the part of the @columnfraction before the decimal point, which
+% is presumably either 0 or the empty string (but we don't check, we
+% just throw it away). #2 is the decimal part, which we use as the
+% percent of \hsize for this column.
+\def\pickupwholefraction#1.#2 {%
\global\advance\colcount by 1
- \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+ \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
\setuptable
}
@@ -3439,33 +2427,18 @@
\go
}
-% multitable-only commands.
-%
-% @headitem starts a heading row, which we typeset in bold.
-% Assignments have to be global since we are inside the implicit group
-% of an alignment entry. Note that \everycr resets \everytab.
-\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
-%
-% A \tab used to include \hskip1sp. But then the space in a template
-% line is not enough. That is bad. So let's go back to just `&' until
-% we encounter the problem it was intended to solve again.
-% --karl, nathan acm org, 20apr99.
-\def\tab{\checkenv\multitable &\the\everytab}%
-
% @multitable ... @end multitable definitions:
%
-\newtoks\everytab % insert after every tab.
-%
-\envdef\multitable{%
+\def\multitable{\parsearg\dotable}
+\def\dotable#1{\bgroup
\vskip\parskip
- \startsavinginserts
- %
- % @item within a multitable starts a normal row.
- % We use \def instead of \let so that if one of the multitable entries
- % contains an @itemize, we don't choke on the \item (seen as \crcr aka
- % \endtemplate) expanding \doitemize.
- \def\item{\crcr}%
- %
+ \let\item=\crcrwithfootnotes
+ % A \tab used to include \hskip1sp. But then the space in a template
+ % line is not enough. That is bad. So let's go back to just & until
+ % we encounter the problem it was intended to solve again. --karl,
+ % nathan acm org, 20apr99.
+ \let\tab=&%
+ \let\startfootins=\startsavedfootnote
\tolerance=9500
\hbadness=9500
\setmultitablespacing
@@ -3473,93 +2446,85 @@
\parindent=\multitableparindent
\overfullrule=0pt
\global\colcount=0
- %
- \everycr = {%
- \noalign{%
- \global\everytab={}%
- \global\colcount=0 % Reset the column counter.
- % Check for saved footnotes, etc.
- \checkinserts
- % Keeps underfull box messages off when table breaks over pages.
- %\filbreak
- % Maybe so, but it also creates really weird page breaks when the
- % table breaks over pages. Wouldn't \vfil be better? Wait until the
- % problem manifests itself, so it can be fixed for real --karl.
- }%
+ \def\Emultitable{%
+ \global\setpercentfalse
+ \crcrwithfootnotes\crcr
+ \egroup\egroup
}%
%
- \parsearg\domultitable
-}
-\def\domultitable#1{%
% To parse everything between @multitable and @item:
\setuptable#1 \endsetuptable
%
+ % \everycr will reset column counter, \colcount, at the end of
+ % each line. Every column entry will cause \colcount to advance by one.
+ % The table preamble
+ % looks at the current \colcount to find the correct column width.
+ \everycr{\noalign{%
+ %
+ % \filbreak%% keeps underfull box messages off when table breaks over pages.
+ % Maybe so, but it also creates really weird page breaks when the table
+ % breaks over pages. Wouldn't \vfil be better? Wait until the problem
+ % manifests itself, so it can be fixed for real --karl.
+ \global\colcount=0\relax}}%
+ %
% This preamble sets up a generic column definition, which will
% be used as many times as user calls for columns.
% \vtop will set a single line and will also let text wrap and
% continue for many paragraphs if desired.
- \halign\bgroup &%
- \global\advance\colcount by 1
- \multistrut
- \vtop{%
- % Use the current \colcount to find the correct column width:
- \hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
- \else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
- \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively
- % marking characters.
- \noindent\ignorespaces##\unskip\multistrut
- }\cr
-}
-\def\Emultitable{%
- \crcr
- \egroup % end the \halign
- \global\setpercentfalse
-}
-
-\def\setmultitablespacing{%
- \def\multistrut{\strut}% just use the standard line spacing
+ \halign\bgroup&\global\advance\colcount by 1\relax
+ \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
%
- % Compute \multitablelinespace (if not defined by user) for use in
- % \multitableparskip calculation. We used define \multistrut based on
- % this, but (ironically) that caused the spacing to be off.
- % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+ % In order to keep entries from bumping into each other
+ % we will add a \leftskip of \multitablecolspace to all columns after
+ % the first one.
+ %
+ % If a template has been used, we will add \multitablecolspace
+ % to the width of each template entry.
+ %
+ % If the user has set preamble in terms of percent of \hsize we will
+ % use that dimension as the width of the column, and the \leftskip
+ % will keep entries from bumping into each other. Table will start at
+ % left margin and final column will justify at right margin.
+ %
+ % Make sure we don't inherit \rightskip from the outer environment.
+ \rightskip=0pt
+ \ifnum\colcount=1
+ % The first column will be indented with the surrounding text.
+ \advance\hsize by\leftskip
+ \else
+ \ifsetpercent \else
+ % If user has not set preamble in terms of percent of \hsize
+ % we will advance \hsize by \multitablecolspace.
+ \advance\hsize by \multitablecolspace
+ \fi
+ % In either case we will make \leftskip=\multitablecolspace:
+ \leftskip=\multitablecolspace
+ \fi
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively marking
+ % characters.
+ \noindent\ignorespaces##\unskip\multistrut}\cr
+}
+
+\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
+% If so, do nothing. If not, give it an appropriate dimension based on
+% current baselineskip.
\ifdim\multitablelinespace=0pt
\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
\global\advance\multitablelinespace by-\ht0
-\fi
+%% strut to put in table in case some entry doesn't have descenders,
+%% to keep lines equally spaced
+\let\multistrut = \strut
+\else
+%% FIXME: what is \box0 supposed to be?
+\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
+width0pt\relax} \fi
%% Test to see if parskip is larger than space between lines of
%% table. If not, do nothing.
%% If so, set to same dimension as multitablelinespace.
@@ -3574,33 +2539,65 @@
%% than skip between lines in the table.
\fi}
+% In case a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is
+% finished. Otherwise, the insertion is lost, it never migrates to the
+% main vertical list. --kasal, 22jan03.
+%
+\newbox\savedfootnotes
+%
+% \dotable \let's \startfootins to this, so that \dofootnote will call
+% it instead of starting the insertion right away.
+\def\startsavedfootnote{%
+ \global\setbox\savedfootnotes = \vbox\bgroup
+ \unvbox\savedfootnotes
+}
+\def\crcrwithfootnotes{%
+ \crcr
+ \ifvoid\savedfootnotes \else
+ \noalign{\insert\footins{\box\savedfootnotes}}%
+ \fi
+}
\message{conditionals,}
-
-% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
-% @ifnotxml always succeed. They currently do nothing; we don't
-% attempt to check whether the conditionals are properly nested. But we
-% have to remember that they are conditionals, so that @end doesn't
-% attempt to close an environment group.
-%
-\def\makecond#1{%
- \expandafter\let\csname #1\endcsname = \relax
- \expandafter\let\csname iscond.#1\endcsname = 1
-}
-\makecond{iftex}
-\makecond{ifnotdocbook}
-\makecond{ifnothtml}
-\makecond{ifnotinfo}
-\makecond{ifnotplaintext}
-\makecond{ifnotxml}
+% Prevent errors for section commands.
+% Used in @ignore and in failing conditionals.
+\def\ignoresections{%
+ \let\appendix=\relax
+ \let\appendixsec=\relax
+ \let\appendixsection=\relax
+ \let\appendixsubsec=\relax
+ \let\appendixsubsection=\relax
+ \let\appendixsubsubsec=\relax
+ \let\appendixsubsubsection=\relax
+ %\let\begin=\relax
+ %\let\bye=\relax
+ \let\centerchap=\relax
+ \let\chapter=\relax
+ \let\contents=\relax
+ \let\section=\relax
+ \let\smallbook=\relax
+ \let\subsec=\relax
+ \let\subsection=\relax
+ \let\subsubsec=\relax
+ \let\subsubsection=\relax
+ \let\titlepage=\relax
+ \let\top=\relax
+ \let\unnumbered=\relax
+ \let\unnumberedsec=\relax
+ \let\unnumberedsection=\relax
+ \let\unnumberedsubsec=\relax
+ \let\unnumberedsubsection=\relax
+ \let\unnumberedsubsubsec=\relax
+ \let\unnumberedsubsubsection=\relax
+}
% Ignore @ignore, @ifhtml, @ifinfo, and the like.
%
\def\direntry{\doignore{direntry}}
+\def\documentdescriptionword{documentdescription}
\def\documentdescription{\doignore{documentdescription}}
-\def\docbook{\doignore{docbook}}
\def\html{\doignore{html}}
-\def\ifdocbook{\doignore{ifdocbook}}
\def\ifhtml{\doignore{ifhtml}}
\def\ifinfo{\doignore{ifinfo}}
\def\ifnottex{\doignore{ifnottex}}
@@ -3610,44 +2607,50 @@
\def\menu{\doignore{menu}}
\def\xml{\doignore{xml}}
+% @dircategory CATEGORY -- specify a category of the dir file
+% which this file should belong to. Ignore this in TeX.
+\let\dircategory = \comment
+
% Ignore text until a line ` end #1', keeping track of nested conditionals.
%
% A count to remember the depth of nesting.
\newcount\doignorecount
\def\doignore#1{\begingroup
- % Scan in ``verbatim'' mode:
- \obeylines
- \catcode`\@ = \other
- \catcode`\{ = \other
- \catcode`\} = \other
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
%
% Make sure that spaces turn into tokens that match what \doignoretext wants.
- \spaceisspace
+ \catcode\spaceChar = 10
+ %
+ % Ignore braces, so mismatched braces don't cause trouble.
+ \catcode`\{ = 9
+ \catcode`\} = 9
%
% Count number of #1's that we've seen.
\doignorecount = 0
%
% Swallow text until we reach the matching ` end #1'.
- \dodoignore{#1}%
+ \expandafter \dodoignore \csname#1\endcsname {#1}%
}
-{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+{ \catcode` =11 % We want to use \ST P which cannot appear in texinfo source.
\obeylines %
%
- \gdef\dodoignore#1{%
- % #1 contains the command name as a string, e.g., `ifinfo'.
- %
- % Define a command to find the next ` end #1'.
- \long\def\doignoretext##1^^M end #1{%
- \doignoretextyyy##1^^M #1\_STOP_}%
- %
+ \gdef\dodoignore#1#2{%
+ % #1 contains, e.g., \ifinfo, a.k.a. @ifinfo.
+ % #2 contains the string `ifinfo'.
+ %
+ % Define a command to find the next ` end #2', which must be on a line
+ % by itself.
+ \long\def\doignoretext##1^^M\end #2{\doignoretextyyy##1^^M#1\ST P}%
% And this command to find another #1 command, at the beginning of a
% line. (Otherwise, we would consider a line ` c @ifset', for
% example, to count as an @ifset for nesting.)
- \long\def\doignoretextyyy##1^^M #1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+ \long\def\doignoretextyyy##1^^M#1##2\ST P{\doignoreyyy{##2}\ST@P}%
%
% And now expand that command.
+ \obeylines %
\doignoretext ^^M%
}%
}
@@ -3661,11 +2664,11 @@
\let\next\doignoretextyyy % ..., look for another.
% If we're here, #1 ends with ^^M\ifinfo (for example).
\fi
- \next #1% the token \_STOP_ is present just after this macro.
+ \next #1% the token \ST P is present just after this macro.
}
-% We have to swallow the remaining "\_STOP_".
-%
+% We have to swallow the remaining "\ST P".
+%
\def\doignoretextzzz#1{%
\ifnum\doignorecount = 0 % We have just found the outermost @end.
\let\next\enddoignore
@@ -3677,12 +2680,7 @@
}
% Finish off ignored text.
-{ \obeylines%
- % Ignore anything after the last ` end #1'; this matters in verbatim
- % environments, where otherwise the newline after an ignored conditional
- % would result in a blank line in the output.
- \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
-}
+\def\enddoignore{\endgroup\ignorespaces}
% @set VAR sets the variable VAR to an empty value.
@@ -3691,58 +2689,53 @@
% Since we want to separate VAR from REST-OF-LINE (which might be
% empty), we can't just use \parsearg; we have to insert a space of our
% own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
-% We rely on the fact that \parsearg sets \catcode`\ =10.
+% didn't need it. Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
%
-\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\set{\begingroup\catcode` =10
+ \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+ \parsearg\setxxx}
+\def\setxxx#1{\setyyy#1 \endsetyyy}
\def\setyyy#1 #2\endsetyyy{%
- {%
- \makevalueexpandable
- \def\temp{#2}%
- \edef\next{\gdef\makecsname{SET#1}}%
- \ifx\temp\empty
- \next{}%
- \else
- \setzzz#2\endsetzzz
- \fi
- }%
+ \def\temp{#2}%
+ \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
+ \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
+ \fi
+ \endgroup
}
-% Remove the trailing space \setxxx inserted.
-\def\setzzz#1 \endsetzzz{\next{#1}}
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider ` set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
% @clear VAR clears (i.e., unsets) the variable VAR.
%
-\parseargdef\clear{%
- {%
- \makevalueexpandable
- \global\expandafter\let\csname SET#1\endcsname=\relax
- }%
-}
+\def\clear{\parsearg\clearxxx}
+\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
% @value{foo} gets the text saved in variable foo.
-\def\value{\begingroup\makevalueexpandable\valuexxx}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
{
- \catcode`\- = \active \catcode`\_ = \active
+ \catcode`\_ = \active
%
- \gdef\makevalueexpandable{%
- \let\value = \expandablevalue
- % We don't want these characters active, ...
+ % We might end up with active _ or - characters in the argument if
+ % we're called from @code, as @code{ value{foo-bar_}} So \let any
+ % such active characters to their normal equivalents.
+ \gdef\value{\begingroup
\catcode`\-=\other \catcode`\_=\other
- % ..., but we might end up with active ones in the argument if
- % we're called from @code, as @code{ value{foo-bar_}}, though.
- % So \let them to their normal equivalents.
- \let-\realdash \let_\normalunderscore
- }
+ \indexbreaks \let_\normalunderscore
+ \valuexxx}
}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we call \makevalueexpandable in \indexdummies).
-% The command has to be fully expandable (if the variable is set), since
-% the result winds up in the index file. This means that if the
-% variable's value contains other Texinfo commands, it's almost certain
-% it will fail (although perhaps we could fix that with sufficient work
-% to do a one-level expansion on the result, instead of complete).
+% properly in indexes (we \let\value to this in \indexdummies). Ones
+% whose names contain - or _ still won't work, but we can't do anything
+% about that. The command has to be fully expandable (if the variable
+% is set), since the result winds up in the index file. This means that
+% if the variable's value contains other Texinfo commands, it's almost
+% certain it will fail (although perhaps we could fix that with
+% sufficient work to do a one-level expansion on the result, instead of
+% complete).
%
\def\expandablevalue#1{%
\expandafter\ifx\csname SET#1\endcsname\relax
@@ -3756,36 +2749,55 @@
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
%
-% To get special treatment of ` end ifset,' call \makeond and the redefine.
-%
-\makecond{ifset}
-\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
-\def\doifset#1#2{%
- {%
- \makevalueexpandable
- \let\next=\empty
- \expandafter\ifx\csname SET#2\endcsname\relax
- #1% If not set, redefine \next.
- \fi
- \expandafter
- }\next
+\def\ifset{\parsearg\doifset}
+\def\doifset#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \let\next=\ifsetfail
+ \else
+ \let\next=\ifsetsucceed
+ \fi
+ \next
}
+\def\ifsetsucceed{\conditionalsucceed{ifset}}
\def\ifsetfail{\doignore{ifset}}
+\defineunmatchedend{ifset}
% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
% defined with @set, or has been undefined with @clear.
%
-% The `\else' inside the `\doifset' parameter is a trick to reuse the
-% above code: if the variable is not set, do nothing, if it is set,
-% then redefine \next to \ifclearfail.
-%
-\makecond{ifclear}
-\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclear{\parsearg\doifclear}
+\def\doifclear#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \let\next=\ifclearsucceed
+ \else
+ \let\next=\ifclearfail
+ \fi
+ \next
+}
+\def\ifclearsucceed{\conditionalsucceed{ifclear}}
\def\ifclearfail{\doignore{ifclear}}
+\defineunmatchedend{ifclear}
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory=\comment
+% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
+% read the text following, through the first @end iftex (etc.). Make
+% ` end iftex' (etc.) valid only after an @iftex.
+%
+\def\iftex{\conditionalsucceed{iftex}}
+\def\ifnothtml{\conditionalsucceed{ifnothtml}}
+\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
+\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
+\defineunmatchedend{iftex}
+\defineunmatchedend{ifnothtml}
+\defineunmatchedend{ifnotinfo}
+\defineunmatchedend{ifnotplaintext}
+
+% True conditional. Since \set globally defines its variables, we can
+% just start and end a group (to keep the @end definition undefined at
+% the outer level).
+%
+\def\conditionalsucceed#1{\begingroup
+ \expandafter\def\csname E#1\endcsname{\endgroup}%
+}
% @defininfoenclose.
\let\definfoenclose=\comment
@@ -3795,8 +2807,9 @@
% Index generation facilities
% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within macros and \if's.
-\edef\newwrite{\makecsname{ptexnewwrite}}
+% except not \outer, so it can be used within \newindex.
+{\catcode`\ =11
+\gdef\newwrite{\alloc 7\write\chardef\sixt@@n}}
% \newindex {foo} defines an index named foo.
% It automatically defines \fooindex such that
@@ -3882,50 +2895,41 @@
% we have to laboriously prevent expansion for those that we don't.
%
\def\indexdummies{%
- \escapechar = `\\ % use backslash in output files.
\def\ {@}% change to @@ when we switch to @ as escape char in index files.
\def\ {\realbackslash\space }%
- %
% Need these in case \tex is in effect and \{ is a \delimiter again.
% But can't use \lbracecmd and \rbracecmd because texindex assumes
% braces and backslashes are used only as delimiters.
\let\{ = \mylbrace
\let\} = \myrbrace
%
- % I don't entirely understand this, but when an index entry is
- % generated from a macro call, the \endinput which \scanmacro inserts
- % causes processing to be prematurely terminated. This is,
- % apparently, because \indexsorttmp is fully expanded, and \endinput
- % is an expandable command. The redefinition below makes \endinput
- % disappear altogether for that purpose -- although logging shows that
- % processing continues to some further point. On the other hand, it
- % seems \endinput does not hurt in the printed index arg, since that
- % is still getting written without apparent harm.
- %
- % Sample source (mac-idx3.tex, reported by Graham Percival to
- % help-texinfo, 22may06):
- % @macro funindex {WORD}
- % @findex xyz
- % @end macro
- % ...
- % @funindex commtest
- %
- % The above is not enough to reproduce the bug, but it gives the flavor.
- %
- % Sample whatsit resulting:
- % write3{\entry{xyz}{@folio }{ code {xyz endinput }}}
- %
- % So:
- \let\endinput = \empty
+ % \definedummyword defines \#1 as \realbackslash #1\space, thus
+ % effectively preventing its expansion. This is used only for control
+ % words, not control letters, because the \space would be incorrect
+ % for control characters, but is needed to separate the control word
+ % from whatever follows.
+ %
+ % For control letters, we have \definedummyletter, which omits the
+ % space.
+ %
+ % These can be used both for control words that take an argument and
+ % those that do not. If it is followed by {arg} in the input, then
+ % that will dutifully get written to the index (or wherever).
+ %
+ \def\definedummyword##1{%
+ \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
+ }%
+ \def\definedummyletter##1{%
+ \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
+ }%
%
% Do the redefinitions.
\commondummies
}
-% For the aux and toc files, @ is the escape character. So we want to
-% redefine everything using @ as the escape character (instead of
-% \realbackslash, still used for index files). When everything uses @,
-% this will be simpler.
+% For the aux file, @ is the escape character. So we want to redefine
+% everything using @ instead of \realbackslash. When everything uses
+% @, this will be simpler.
%
\def\atdummies{%
\def\ {@@}%
@@ -3933,190 +2937,161 @@
\let\{ = \lbraceatcmd
\let\} = \rbraceatcmd
%
+ % (See comments in \indexdummies.)
+ \def\definedummyword##1{%
+ \expandafter\def\csname ##1\endcsname{ ##1\space}%
+ }%
+ \def\definedummyletter##1{%
+ \expandafter\def\csname ##1\endcsname{ ##1}%
+ }%
+ %
% Do the redefinitions.
\commondummies
- \otherbackslash
}
-% Called from \indexdummies and \atdummies.
+% Called from \indexdummies and \atdummies. \definedummyword and
+% \definedummyletter must be defined first.
%
\def\commondummies{%
%
- % \definedummyword defines \#1 as \string\#1\space, thus effectively
- % preventing its expansion. This is used only for control% words,
- % not control letters, because the \space would be incorrect for
- % control characters, but is needed to separate the control word
- % from whatever follows.
- %
- % For control letters, we have \definedummyletter, which omits the
- % space.
- %
- % These can be used both for control words that take an argument and
- % those that do not. If it is followed by {arg} in the input, then
- % that will dutifully get written to the index (or wherever).
+ \normalturnoffactive
%
- \def\definedummyword ##1{\def##1{\string##1\space}}%
- \def\definedummyletter##1{\def##1{\string##1}}%
- \let\definedummyaccent\definedummyletter
- %
- \commondummiesnofonts
- %
- \definedummyletter\_%
- %
- % Non-English letters.
- \definedummyword\AA
- \definedummyword\AE
- \definedummyword\L
- \definedummyword\OE
- \definedummyword\O
- \definedummyword\aa
- \definedummyword\ae
- \definedummyword\l
- \definedummyword\oe
- \definedummyword\o
- \definedummyword\ss
- \definedummyword\exclamdown
- \definedummyword\questiondown
- \definedummyword\ordf
- \definedummyword\ordm
+ % Control letters and accents.
+ \definedummyletter{_}%
+ \definedummyletter{,}%
+ \definedummyletter{"}%
+ \definedummyletter{`}%
+ \definedummyletter{'}%
+ \definedummyletter{^}%
+ \definedummyletter{~}%
+ \definedummyletter{=}%
+ \definedummyword{u}%
+ \definedummyword{v}%
+ \definedummyword{H}%
+ \definedummyword{dotaccent}%
+ \definedummyword{ringaccent}%
+ \definedummyword{tieaccent}%
+ \definedummyword{ubaraccent}%
+ \definedummyword{udotaccent}%
+ \definedummyword{dotless}%
+ %
+ % Other non-English letters.
+ \definedummyword{AA}%
+ \definedummyword{AE}%
+ \definedummyword{L}%
+ \definedummyword{OE}%
+ \definedummyword{O}%
+ \definedummyword{aa}%
+ \definedummyword{ae}%
+ \definedummyword{l}%
+ \definedummyword{oe}%
+ \definedummyword{o}%
+ \definedummyword{ss}%
%
% Although these internal commands shouldn't show up, sometimes they do.
- \definedummyword\bf
- \definedummyword\gtr
- \definedummyword\hat
- \definedummyword\less
- \definedummyword\sf
- \definedummyword\sl
- \definedummyword\tclose
- \definedummyword\tt
+ \definedummyword{bf}%
+ \definedummyword{gtr}%
+ \definedummyword{hat}%
+ \definedummyword{less}%
+ \definedummyword{sf}%
+ \definedummyword{sl}%
+ \definedummyword{tclose}%
+ \definedummyword{tt}%
%
- \definedummyword\LaTeX
- \definedummyword\TeX
+ % Texinfo font commands.
+ \definedummyword{b}%
+ \definedummyword{i}%
+ \definedummyword{r}%
+ \definedummyword{sc}%
+ \definedummyword{t}%
+ %
+ \definedummyword{TeX}%
+ \definedummyword{acronym}%
+ \definedummyword{cite}%
+ \definedummyword{code}%
+ \definedummyword{command}%
+ \definedummyword{dfn}%
+ \definedummyword{dots}%
+ \definedummyword{emph}%
+ \definedummyword{env}%
+ \definedummyword{file}%
+ \definedummyword{kbd}%
+ \definedummyword{key}%
+ \definedummyword{math}%
+ \definedummyword{option}%
+ \definedummyword{samp}%
+ \definedummyword{strong}%
+ \definedummyword{uref}%
+ \definedummyword{url}%
+ \definedummyword{var}%
+ \definedummyword{verb}%
+ \definedummyword{w}%
%
% Assorted special characters.
- \definedummyword\bullet
- \definedummyword\comma
- \definedummyword\copyright
- \definedummyword\registeredsymbol
- \definedummyword\dots
- \definedummyword\enddots
- \definedummyword\equiv
- \definedummyword\error
- \definedummyword\euro
- \definedummyword\guillemetleft
- \definedummyword\guillemetright
- \definedummyword\guilsinglleft
- \definedummyword\guilsinglright
- \definedummyword\expansion
- \definedummyword\minus
- \definedummyword\pounds
- \definedummyword\point
- \definedummyword\print
- \definedummyword\quotedblbase
- \definedummyword\quotedblleft
- \definedummyword\quotedblright
- \definedummyword\quoteleft
- \definedummyword\quoteright
- \definedummyword\quotesinglbase
- \definedummyword\result
- \definedummyword\textdegree
+ \definedummyword{bullet}%
+ \definedummyword{copyright}%
+ \definedummyword{dots}%
+ \definedummyword{enddots}%
+ \definedummyword{equiv}%
+ \definedummyword{error}%
+ \definedummyword{expansion}%
+ \definedummyword{minus}%
+ \definedummyword{pounds}%
+ \definedummyword{point}%
+ \definedummyword{print}%
+ \definedummyword{result}%
%
- % We want to disable all macros so that they are not expanded by \write.
- \macrolist
+ % Handle some cases of @value -- where the variable name does not
+ % contain - or _, and the value does not contain any
+ % (non-fully-expandable) commands.
+ \let\value = \expandablevalue
%
- \normalturnoffactive
+ % Normal spaces, not active ones.
+ \unsepspaces
%
- % Handle some cases of @value -- where it does not contain any
- % (non-fully-expandable) commands.
- \makevalueexpandable
+ % No macro expansion.
+ \turnoffmacros
}
-% \commondummiesnofonts: common to \commondummies and \indexnofonts.
-%
-\def\commondummiesnofonts{%
- % Control letters and accents.
- \definedummyletter\!%
- \definedummyaccent\"%
- \definedummyaccent\'%
- \definedummyletter\*%
- \definedummyaccent\,%
- \definedummyletter\.%
- \definedummyletter\/%
- \definedummyletter\:%
- \definedummyaccent\=%
- \definedummyletter\?%
- \definedummyaccent\^%
- \definedummyaccent\`%
- \definedummyaccent\~%
- \definedummyword\u
- \definedummyword\v
- \definedummyword\H
- \definedummyword\dotaccent
- \definedummyword\ringaccent
- \definedummyword\tieaccent
- \definedummyword\ubaraccent
- \definedummyword\udotaccent
- \definedummyword\dotless
- %
- % Texinfo font commands.
- \definedummyword\b
- \definedummyword\i
- \definedummyword\r
- \definedummyword\sc
- \definedummyword\t
- %
- % Commands that take arguments.
- \definedummyword\acronym
- \definedummyword\cite
- \definedummyword\code
- \definedummyword\command
- \definedummyword\dfn
- \definedummyword\emph
- \definedummyword\env
- \definedummyword\file
- \definedummyword\kbd
- \definedummyword\key
- \definedummyword\math
- \definedummyword\option
- \definedummyword\pxref
- \definedummyword\ref
- \definedummyword\samp
- \definedummyword\strong
- \definedummyword\tie
- \definedummyword\uref
- \definedummyword\url
- \definedummyword\var
- \definedummyword\verb
- \definedummyword\w
- \definedummyword\xref
-}
+% If an index command is used in an @example environment, any spaces
+% therein should become regular spaces in the raw index file, not the
+% expansion of \tie (\leavevmode \penalty \ M \ ).
+{\obeyspaces
+ \gdef\unsepspaces{\obeyspaces\let =\space}}
+
% \indexnofonts is used when outputting the strings to sort the index
% by, and when constructing control sequence names. It eliminates all
% control sequences and just writes whatever the best ASCII sort string
% would be for a given command (usually its argument).
%
+\def\indexdummytex{TeX}
+\def\indexdummydots{...}
+%
\def\indexnofonts{%
- % Accent commands should become @asis.
- \def\definedummyaccent##1{\let##1\asis}%
- % We can just ignore other control letters.
- \def\definedummyletter##1{\let##1\empty}%
- % Hopefully, all control words can become @asis.
- \let\definedummyword\definedummyaccent
- %
- \commondummiesnofonts
- %
- % Don't no-op \tt, since it isn't a user-level command
- % and is used in the definitions of the active chars like <, >, |, etc.
- % Likewise with the other plain tex font commands.
- %\let\tt=\asis
- %
\def\ { }%
\def\ {@}%
% how to handle braces?
\def\_{\normalunderscore}%
%
- % Non-English letters.
+ \let\,=\asis
+ \let\"=\asis
+ \let\`=\asis
+ \let\'=\asis
+ \let\^=\asis
+ \let\~=\asis
+ \let\==\asis
+ \let\u=\asis
+ \let\v=\asis
+ \let\H=\asis
+ \let\dotaccent=\asis
+ \let\ringaccent=\asis
+ \let\tieaccent=\asis
+ \let\ubaraccent=\asis
+ \let\udotaccent=\asis
+ \let\dotless=\asis
+ %
+ % Other non-English letters.
\def\AA{AA}%
\def\AE{AE}%
\def\L{L}%
@@ -4130,72 +3105,60 @@
\def\ss{ss}%
\def\exclamdown{!}%
\def\questiondown{?}%
- \def\ordf{a}%
- \def\ordm{o}%
%
- \def\LaTeX{LaTeX}%
- \def\TeX{TeX}%
+ % Don't no-op \tt, since it isn't a user-level command
+ % and is used in the definitions of the active chars like <, >, |, etc.
+ % Likewise with the other plain tex font commands.
+ %\let\tt=\asis
%
- % Assorted special characters.
- % (The following {} will end up in the sort string, but that's ok.)
- \def\bullet{bullet}%
- \def\comma{,}%
- \def\copyright{copyright}%
- \def\registeredsymbol{R}%
- \def\dots{...}%
- \def\enddots{...}%
- \def\equiv{==}%
- \def\error{error}%
- \def\euro{euro}%
- \def\guillemetleft{<<}%
- \def\guillemetright{>>}%
- \def\guilsinglleft{<}%
- \def\guilsinglright{>}%
- \def\expansion{==>}%
- \def\minus{-}%
- \def\pounds{pounds}%
- \def\point{.}%
- \def\print{-|}%
- \def\quotedblbase{"}%
- \def\quotedblleft{"}%
- \def\quotedblright{"}%
- \def\quoteleft{`}%
- \def\quoteright{'}%
- \def\quotesinglbase{,}%
- \def\result{=>}%
- \def\textdegree{degrees}%
- %
- % We need to get rid of all macros, leaving only the arguments (if present).
- % Of course this is not nearly correct, but it is the best we can do for now.
- % makeinfo does not expand macros in the argument to @deffn, which ends up
- % writing an index entry, and texindex isn't prepared for an index sort entry
- % that starts with \.
- %
- % Since macro invocations are followed by braces, we can just redefine them
- % to take a single TeX argument. The case of a macro invocation that
- % goes to end-of-line is not handled.
- %
- \macrolist
+ % Texinfo font commands.
+ \let\b=\asis
+ \let\i=\asis
+ \let\r=\asis
+ \let\sc=\asis
+ \let\t=\asis
+ %
+ \let\TeX=\indexdummytex
+ \let\acronym=\asis
+ \let\cite=\asis
+ \let\code=\asis
+ \let\command=\asis
+ \let\dfn=\asis
+ \let\dots=\indexdummydots
+ \let\emph=\asis
+ \let\env=\asis
+ \let\file=\asis
+ \let\kbd=\asis
+ \let\key=\asis
+ \let\math=\asis
+ \let\option=\asis
+ \let\samp=\asis
+ \let\strong=\asis
+ \let\uref=\asis
+ \let\url=\asis
+ \let\var=\asis
+ \let\verb=\asis
+ \let\w=\asis
}
\let\indexbackslash=0 %overridden during \printindex.
\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
% Most index entries go through here, but \dosubind is the general case.
-% #1 is the index name, #2 is the entry text.
+%
\def\doind#1#2{\dosubind{#1}{#2}{}}
% Workhorse for all \fooindexes.
% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% empty if called from \doind, as we usually are (the main exception
-% is with most defuns, which call us directly).
+% \empty if called from \doind, as we usually are. The main exception
+% is with defuns, which call us directly.
%
\def\dosubind#1#2#3{%
\iflinks
{%
% Store the main index entry text (including the third arg).
\toks0 = {#2}%
- % If third arg is present, precede it with a space.
+ % If third arg is present, precede it with space.
\def\thirdarg{#3}%
\ifx\thirdarg\empty \else
\toks0 = \expandafter{\the\toks0 \space #3}%
@@ -4203,12 +3166,16 @@
%
\edef\writeto{\csname#1indfile\endcsname}%
%
- \safewhatsit\dosubindwrite
+ \ifvmode
+ \dosubindsanitize
+ \else
+ \dosubindwrite
+ \fi
}%
\fi
}
-% Write the entry in \toks0 to the index file:
+% Write the entry to the index file:
%
\def\dosubindwrite{%
% Put the index entry in the margin if desired.
@@ -4218,7 +3185,8 @@
%
% Remember, we are within a group.
\indexdummies % Must do this here, since \bf, etc expand at this stage
- \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
+ \escapechar=`\\
+ \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
% so it will be output as is; and it will print as backslash.
%
% Process the index entry with all font commands turned off, to
@@ -4240,13 +3208,13 @@
\temp
}
-% Take care of unwanted page breaks/skips around a whatsit:
+% Take care of unwanted page breaks:
%
% If a skip is the last thing on the list now, preserve it
% by backing up by \lastskip, doing the \write, then inserting
% the skip again. Otherwise, the whatsit generated by the
-% \write or \pdfdest will make \lastskip zero. The result is that
-% sequences like this:
+% \write will make \lastskip zero. The result is that sequences
+% like this:
% @end defun
% @tindex whatever
% @defun ...
@@ -4259,63 +3227,38 @@
%
% Avoid page breaks due to these extra skips, too.
%
-% But wait, there is a catch there:
-% We'll have to check whether \lastskip is zero skip. \ifdim is not
-% sufficient for this purpose, as it ignores stretch and shrink parts
-% of the skip. The only way seems to be to check the textual
-% representation of the skip.
-%
-% The following is almost like \def\zeroskipmacro{0.0pt} except that
-% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
-%
-\edef\zeroskipmacro{\expandafter\the\csname z skip\endcsname}
-%
-\newskip\whatsitskip
-\newcount\whatsitpenalty
-%
-% ..., ready, GO:
-%
-\def\safewhatsit#1{%
-\ifhmode
- #1%
-\else
+\def\dosubindsanitize{%
% \lastskip and \lastpenalty cannot both be nonzero simultaneously.
- \whatsitskip = \lastskip
- \edef\lastskipmacro{\the\lastskip}%
- \whatsitpenalty = \lastpenalty
+ \skip0 = \lastskip
+ \count255 = \lastpenalty
%
% If \lastskip is nonzero, that means the last item was a
% skip. And since a skip is discardable, that means this
- % -\whatsitskip glue we're inserting is preceded by a
+ % -\skip0 glue we're inserting is preceded by a
% non-discardable item, therefore it is not a potential
% breakpoint, therefore no \nobreak needed.
- \ifx\lastskipmacro\zeroskipmacro
- \else
- \vskip-\whatsitskip
- \fi
+ \ifdim\lastskip = 0pt \else \vskip-\skip0 \fi
%
- #1%
+ \dosubindwrite
%
- \ifx\lastskipmacro\zeroskipmacro
- % If \lastskip was zero, perhaps the last item was a penalty, and
- % perhaps it was >=10000, e.g., a \nobreak. In that case, we want
- % to re-insert the same penalty (values >10000 are used for various
- % signals); since we just inserted a non-discardable item, any
- % following glue (such as a \parskip) would be a breakpoint. For example:
- %
+ \ifdim\skip0 = 0pt
+ % if \lastskip was zero, perhaps the last item was a
+ % penalty, and perhaps it was >=10000, e.g., a \nobreak.
+ % In that case, we want to re-insert the penalty; since we
+ % just inserted a non-discardable item, any following glue
+ % (such as a \parskip) would be a breakpoint. For example:
% @deffn deffn-whatever
% @vindex index-whatever
% Description.
% would allow a break between the index-whatever whatsit
% and the "Description." paragraph.
- \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
+ \ifnum\count255>9999 \nobreak \fi
\else
% On the other hand, if we had a nonzero \lastskip,
% this make-up glue would be preceded by a non-discardable item
% (the whatsit from the \write), so we must insert a \nobreak.
- \nobreak\vskip\whatsitskip
+ \nobreak\vskip\skip0
\fi
-\fi
}
% The index entry written in the file actually looks like
@@ -4353,13 +3296,14 @@
% @printindex causes a particular index (the ??s file) to get printed.
% It does not print any chapter heading (usually an @unnumbered).
%
-\parseargdef\printindex{\begingroup
+\def\printindex{\parsearg\doprintindex}
+\def\doprintindex#1{\begingroup
\dobreak \chapheadingskip{10000}%
%
\smallfonts \rm
\tolerance = 9500
- \plainfrenchspacing
\everypar = {}% don't want the \kern\-parindent from indentation suppression.
+ \indexbreaks
%
% See if the index file exists and is nonempty.
% Change catcode of @ here so that if the index file contains
@@ -4386,7 +3330,7 @@
% Index files are almost Texinfo source, but we use \ as the escape
% character. It would be better to use @, but that's too big a change
% to make right now.
- \def\indexbackslash{\backslashcurfont}%
+ \def\indexbackslash{\rawbackslashxx}%
\catcode`\\ = 0
\escapechar = `\\
\begindoublecolumns
@@ -4408,10 +3352,7 @@
\removelastskip
%
% We like breaks before the index initials, so insert a bonus.
- \nobreak
- \vskip 0pt plus 3\baselineskip
- \penalty 0
- \vskip 0pt plus -3\baselineskip
+ \penalty -300
%
% Typeset the initial. Making this add up to a whole number of
% baselineskips increases the chance of the dots lining up from column
@@ -4421,101 +3362,84 @@
% No shrink because it confuses \balancecolumns.
\vskip 1.67\baselineskip plus .5\baselineskip
\leftline{\secbf #1}%
+ \vskip .33\baselineskip plus .1\baselineskip
+ %
% Do our best not to break after the initial.
\nobreak
- \vskip .33\baselineskip plus .1\baselineskip
}}
-% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
-% then page number (#2) flushed to the right margin. It is used for index
-% and table of contents entries. The paragraph is indented by \leftskip.
-%
-% A straightforward implementation would start like this:
-% \def\entry#1#2{...
-% But this frozes the catcodes in the argument, and can cause problems to
-% @code, which sets - active. This problem was fixed by a kludge---
-% ``-'' was active throughout whole index, but this isn't really right.
-%
-% The right solution is to prevent \entry from swallowing the whole text.
-% --kasal, 21nov03
-\def\entry{%
- \begingroup
- %
- % Start a new paragraph if necessary, so our assignments below can't
- % affect previous text.
- \par
- %
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
- % No extra space above this paragraph.
- \parskip = 0in
- %
- % Do not prefer a separate line ending with a hyphen to fewer lines.
- \finalhyphendemerits = 0
- %
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
- %
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
- %
- % A bit of stretch before each entry for the benefit of balancing
- % columns.
- \vskip 0pt plus1pt
- %
- % Swallow the left brace of the text (first parameter):
- \afterassignment\doentry
- \let\temp =
-}
-\def\doentry{%
- \bgroup % Instead of the swallowed brace.
- \noindent
- \aftergroup\finishentry
- % And now comes the text of the entry.
-}
-\def\finishentry#1{%
- % #1 is the page number.
- %
- % The following is kludged to not output a line of dots in the index if
- % there are no page numbers. The next person who breaks this will be
- % cursed by a Unix daemon.
- \setbox\boxA = \hbox{#1}%
- \ifdim\wd\boxA = 0pt
- \ %
+% This typesets a paragraph consisting of #1, dot leaders, and then #2
+% flush to the right margin. It is used for index and table of contents
+% entries. The paragraph is indented by \leftskip.
+%
+\def\entry#1#2{\begingroup
+ %
+ % Start a new paragraph if necessary, so our assignments below can't
+ % affect previous text.
+ \par
+ %
+ % Do not fill out the last line with white space.
+ \parfillskip = 0in
+ %
+ % No extra space above this paragraph.
+ \parskip = 0in
+ %
+ % Do not prefer a separate line ending with a hyphen to fewer lines.
+ \finalhyphendemerits = 0
+ %
+ % \hangindent is only relevant when the entry text and page number
+ % don't both fit on one line. In that case, bob suggests starting the
+ % dots pretty far over on the line. Unfortunately, a large
+ % indentation looks wrong when the entry text itself is broken across
+ % lines. So we use a small indentation and put up with long leaders.
+ %
+ % \hangafter is reset to 1 (which is the value we want) at the start
+ % of each paragraph, so we need not do anything with that.
+ \hangindent = 2em
+ %
+ % When the entry text needs to be broken, just fill out the first line
+ % with blank space.
+ \rightskip = 0pt plus1fil
+ %
+ % A bit of stretch before each entry for the benefit of balancing columns.
+ \vskip 0pt plus1pt
+ %
+ % Start a ``paragraph'' for the index entry so the line breaking
+ % parameters we've set above will have an effect.
+ \noindent
+ %
+ % Insert the text of the index entry. TeX will do line-breaking on it.
+ #1%
+ % The following is kludged to not output a line of dots in the index if
+ % there are no page numbers. The next person who breaks this will be
+ % cursed by a Unix daemon.
+ \def\tempa{{\rm }}%
+ \def\tempb{#2}%
+ \edef\tempc{\tempa}%
+ \edef\tempd{\tempb}%
+ \ifx\tempc\tempd\ \else%
+ %
+ % If we must, put the page number on a line of its own, and fill out
+ % this line with blank space. (The \hfil is overwhelmed with the
+ % fill leaders glue in \indexdotfill if the page number does fit.)
+ \hfil\penalty50
+ \null\nobreak\indexdotfill % Have leaders before the page number.
+ %
+ % The `\ ' here is removed by the implicit \unskip that TeX does as
+ % part of (the primitive) \par. Without it, a spurious underfull
+ % \hbox ensues.
+ \ifpdf
+ \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
\else
- %
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
- \null\nobreak\indexdotfill % Have leaders before the page number.
- %
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
- \ifpdf
- \pdfgettoks#1.%
- \ \the\toksA
- \else
- \ #1%
- \fi
+ \ #2% The page number ends the paragraph.
\fi
- \par
- \endgroup
-}
+ \fi%
+ \par
+\endgroup}
-% Like plain.tex's \dotfill, except uses up at least 1 em.
+% Like \dotfill except takes at least 1 em.
\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
+ \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
\def\primary #1{\line{#1\hfil}}
@@ -4625,34 +3549,6 @@
%
% All done with double columns.
\def\enddoublecolumns{%
- % The following penalty ensures that the page builder is exercised
- % _before_ we change the output routine. This is necessary in the
- % following situation:
- %
- % The last section of the index consists only of a single entry.
- % Before this section, \pagetotal is less than \pagegoal, so no
- % break occurs before the last section starts. However, the last
- % section, consisting of \initial and the single \entry, does not
- % fit on the page and has to be broken off. Without the following
- % penalty the page builder will not be exercised until \eject
- % below, and by that time we'll already have changed the output
- % routine to the \balancecolumns version, so the next-to-last
- % double-column page will be processed with \balancecolumns, which
- % is wrong: The two columns will go to the main vertical list, with
- % the broken-off section in the recent contributions. As soon as
- % the output routine finishes, TeX starts reconsidering the page
- % break. The two columns and the broken-off section both fit on the
- % page, because the two columns now take up only half of the page
- % goal. When TeX sees \eject from below which follows the final
- % section, it invokes the new output routine that we've set after
- % \balancecolumns below; \onepageout will try to fit the two columns
- % and the final section into the vbox of \pageheight (see
- % \pagebody), causing an overfull box.
- %
- % Note that glue won't work here, because glue does not exercise the
- % page builder, unlike penalties (see The TeXbook, pp. 280-281).
- \penalty0
- %
\output = {%
% Split the last of the double-column material. Leave it on the
% current page, no automatic page break.
@@ -4726,7 +3622,7 @@
% We do the following ugly conditional instead of the above simple
% construct for the sake of pdftex, which needs the actual
% letter in the expansion, not just typeset.
-%
+%
\def\appendixletter{%
\ifnum\appendixno=`A A%
\else\ifnum\appendixno=`B B%
@@ -4762,15 +3658,11 @@
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-% Each @chapter defines these (using marks) as the number+name, number
-% and name of the chapter. Page headings and footings can use
-% these. @section does likewise.
+% Each @chapter defines this as the name of the chapter.
+% page headings and footings can use it. @section does likewise.
+% However, they are not reliable, because we don't use marks.
\def\thischapter{}
-\def\thischapternum{}
-\def\thischaptername{}
\def\thissection{}
-\def\thissectionnum{}
-\def\thissectionname{}
\newcount\absseclevel % used to calculate proper heading level
\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
@@ -4783,106 +3675,59 @@
\def\lowersections{\global\advance\secbase by 1}
\let\down=\lowersections % original BFox name
-% we only have subsub.
-\chardef\maxseclevel = 3
-%
-% A numbered section within an unnumbered changes to unnumbered too.
-% To achive this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unmlevel = \maxseclevel
-%
-% Trace whether the current chapter is an appendix or not:
-% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
-\def\chapheadtype{N}
-
-% Choose a heading macro
-% #1 is heading type
-% #2 is heading level
-% #3 is text for heading
-\def\genhead#1#2#3{%
- % Compute the abs. sec. level:
- \absseclevel=#2
- \advance\absseclevel by \secbase
- % Make sure \absseclevel doesn't fall outside the range:
- \ifnum \absseclevel < 0
- \absseclevel = 0
+% Choose a numbered-heading macro
+% #1 is heading level if unmodified by @raisesections or @lowersections
+% #2 is text for heading
+\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+ \chapterzzz{#2}%
+ \or \seczzz{#2}%
+ \or \numberedsubseczzz{#2}%
+ \or \numberedsubsubseczzz{#2}%
\else
- \ifnum \absseclevel > 3
- \absseclevel = 3
+ \ifnum \absseclevel<0 \chapterzzz{#2}%
+ \else \numberedsubsubseczzz{#2}%
\fi
\fi
- % The heading type:
- \def\headtype{#1}%
- \if \headtype U%
- \ifnum \absseclevel < \unmlevel
- \chardef\unmlevel = \absseclevel
- \fi
+ \suppressfirstparagraphindent
+}
+
+% like \numhead, but chooses appendix heading levels
+\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+ \appendixzzz{#2}%
+ \or \appendixsectionzzz{#2}%
+ \or \appendixsubseczzz{#2}%
+ \or \appendixsubsubseczzz{#2}%
\else
- % Check for appendix sections:
- \ifnum \absseclevel = 0
- \edef\chapheadtype{\headtype}%
- \else
- \if \headtype A\if \chapheadtype N%
- \errmessage{ appendix within a non-appendix chapter}%
- \fi\fi
- \fi
- % Check for numbered within unnumbered:
- \ifnum \absseclevel > \unmlevel
- \def\headtype{U}%
- \else
- \chardef\unmlevel = 3
+ \ifnum \absseclevel<0 \appendixzzz{#2}%
+ \else \appendixsubsubseczzz{#2}%
\fi
\fi
- % Now print the heading:
- \if \headtype U%
- \ifcase\absseclevel
- \unnumberedzzz{#3}%
- \or \unnumberedseczzz{#3}%
- \or \unnumberedsubseczzz{#3}%
- \or \unnumberedsubsubseczzz{#3}%
- \fi
+ \suppressfirstparagraphindent
+}
+
+% like \numhead, but chooses numberless heading levels
+\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+ \ifcase\absseclevel
+ \unnumberedzzz{#2}%
+ \or \unnumberedseczzz{#2}%
+ \or \unnumberedsubseczzz{#2}%
+ \or \unnumberedsubsubseczzz{#2}%
\else
- \if \headtype A%
- \ifcase\absseclevel
- \appendixzzz{#3}%
- \or \appendixsectionzzz{#3}%
- \or \appendixsubseczzz{#3}%
- \or \appendixsubsubseczzz{#3}%
- \fi
- \else
- \ifcase\absseclevel
- \chapterzzz{#3}%
- \or \seczzz{#3}%
- \or \numberedsubseczzz{#3}%
- \or \numberedsubsubseczzz{#3}%
- \fi
+ \ifnum \absseclevel<0 \unnumberedzzz{#2}%
+ \else \unnumberedsubsubseczzz{#2}%
\fi
\fi
\suppressfirstparagraphindent
}
-% an interface:
-\def\numhead{\genhead N}
-\def\apphead{\genhead A}
-\def\unnmhead{\genhead U}
-
-% @chapter, @appendix, @unnumbered. Increment top-level counter, reset
-% all lower-level sectioning counters to zero.
-%
-% Also set \chaplevelprefix, which we prepend to @float sequence numbers
-% (e.g., figures), q.v. By default (before any chapter), that is empty.
-\let\chaplevelprefix = \empty
+% @chapter, @appendix, @unnumbered.
%
-\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\outer\def\chapter{\parsearg\chapteryyy}
+\def\chapteryyy#1{\numhead0{#1}} % normally numhead0 calls chapterzzz
\def\chapterzzz#1{%
- % section resetting is \global in case the chapter is in a group, such
- % as an @include file.
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\chapno by 1
- %
- % Used for \float.
- \gdef\chaplevelprefix{\the\chapno.}%
- \resetallfloatnos
- %
+ \secno=0 \subsecno=0 \subsubsecno=0 \advance\chapno by 1
\message{\putwordChapter\space \the\chapno}%
%
% Write the actual heading.
@@ -4894,31 +3739,29 @@
\global\let\subsubsection = \numberedsubsubsec
}
-\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\outer\def\appendix{\parsearg\appendixyyy}
+\def\appendixyyy#1{\apphead0{#1}} % normally apphead0 calls appendixzzz
\def\appendixzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\appendixno by 1
- \gdef\chaplevelprefix{\appendixletter.}%
- \resetallfloatnos
- %
+ \secno=0 \subsecno=0 \subsubsecno=0 \advance\appendixno by 1
\def\appendixnum{\putwordAppendix\space \appendixletter}%
\message{\appendixnum}%
- %
\chapmacro{#1}{Yappendix}{\appendixletter}%
- %
\global\let\section = \appendixsec
\global\let\subsection = \appendixsubsec
\global\let\subsubsection = \appendixsubsubsec
}
-\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\def\centerchap{\parsearg\centerchapyyy}
+\def\centerchapyyy#1{{\unnumberedyyy{#1}}}
+
+% @top is like @unnumbered.
+\outer\def\top{\parsearg\unnumberedyyy}
+
+\outer\def\unnumbered{\parsearg\unnumberedyyy}
+\def\unnumberedyyy#1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
\def\unnumberedzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\unnumberedno by 1
- %
- % Since an unnumbered has no number, no prefix for figures.
- \global\let\chaplevelprefix = \empty
- \resetallfloatnos
+ \secno=0 \subsecno=0 \subsubsecno=0 \advance\unnumberedno by 1
%
% This used to be simply \message{#1}, but TeX fully expands the
% argument to \message. Therefore, if #1 contained @-commands, TeX
@@ -4931,8 +3774,7 @@
% \the<toks register> to achieve this: TeX expands \the<toks> only once,
% simply yielding the contents of <toks register>. (We also do this for
% the toc entries.)
- \toks0 = {#1}%
- \message{(\the\toks0)}%
+ \toks0 = {#1}\message{(\the\toks0)}%
%
\chapmacro{#1}{Ynothing}{\the\unnumberedno}%
%
@@ -4941,82 +3783,96 @@
\global\let\subsubsection = \unnumberedsubsubsec
}
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{%
- % Well, we could do the following in a group, but that would break
- % an assumption that \chapmacro is called at the outermost level.
- % Thus we are safer this way: --kasal, 24feb04
- \let\centerparametersmaybe = \centerparameters
- \unnmhead0{#1}%
- \let\centerparametersmaybe = \relax
-}
-
-% @top is like @unnumbered.
-\let\top\unnumbered
-
% Sections.
-\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\outer\def\numberedsec{\parsearg\secyyy}
+\def\secyyy#1{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \subsecno=0 \subsubsecno=0 \advance\secno by 1
\sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
}
-\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
+\outer\def\appendixsection{\parsearg\appendixsecyyy}
+\outer\def\appendixsec{\parsearg\appendixsecyyy}
+\def\appendixsecyyy#1{\apphead1{#1}} % normally calls appendixsectionzzz
\def\appendixsectionzzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \subsecno=0 \subsubsecno=0 \advance\secno by 1
\sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
}
-\let\appendixsec\appendixsection
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
+\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
+\def\unnumberedsecyyy#1{\unnmhead1{#1}} % normally calls unnumberedseczzz
\def\unnumberedseczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \subsecno=0 \subsubsecno=0 \advance\secno by 1
\sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
}
% Subsections.
-\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
+\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
+\def\numberedsubsecyyy#1{\numhead2{#1}} % normally calls numberedsubseczzz
\def\numberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
+ \subsubsecno=0 \advance\subsecno by 1
\sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
}
-\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
+\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
+\def\appendixsubsecyyy#1{\apphead2{#1}} % normally calls appendixsubseczzz
\def\appendixsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
+ \subsubsecno=0 \advance\subsecno by 1
\sectionheading{#1}{subsec}{Yappendix}%
{\appendixletter.\the\secno.\the\subsecno}%
}
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
+\def\unnumberedsubsecyyy#1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
\def\unnumberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
+ \subsubsecno=0 \advance\subsecno by 1
\sectionheading{#1}{subsec}{Ynothing}%
{\the\unnumberedno.\the\secno.\the\subsecno}%
}
% Subsubsections.
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
+\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
+\def\numberedsubsubsecyyy#1{\numhead3{#1}} % normally numberedsubsubseczzz
\def\numberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
+ \advance\subsubsecno by 1
\sectionheading{#1}{subsubsec}{Ynumbered}%
{\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
}
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
+\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
+\def\appendixsubsubsecyyy#1{\apphead3{#1}} % normally appendixsubsubseczzz
\def\appendixsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
+ \advance\subsubsecno by 1
\sectionheading{#1}{subsubsec}{Yappendix}%
{\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
}
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
+\def\unnumberedsubsubsecyyy#1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
\def\unnumberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
+ \advance\subsubsecno by 1
\sectionheading{#1}{subsubsec}{Ynothing}%
{\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
}
+% These are variants which are not "outer", so they can appear in @ifinfo.
+% Actually, they are now be obsolete; ordinary section commands should work.
+\def\infotop{\parsearg\unnumberedzzz}
+\def\infounnumbered{\parsearg\unnumberedzzz}
+\def\infounnumberedsec{\parsearg\unnumberedseczzz}
+\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
+\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
+
+\def\infoappendix{\parsearg\appendixzzz}
+\def\infoappendixsec{\parsearg\appendixseczzz}
+\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
+\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
+
+\def\infochapter{\parsearg\chapterzzz}
+\def\infosection{\parsearg\sectionzzz}
+\def\infosubsection{\parsearg\subsectionzzz}
+\def\infosubsubsection{\parsearg\subsubsectionzzz}
+
% These macros control what the section commands do, according
% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
% Define them by default for a numbered chapter.
@@ -5050,11 +3906,14 @@
}
% @heading, @subheading, @subsubheading.
-\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+\def\heading{\parsearg\doheading}
+\def\subheading{\parsearg\dosubheading}
+\def\subsubheading{\parsearg\dosubsubheading}
+\def\doheading#1{\sectionheading{#1}{sec}{Yomitfromtoc}{}
\suppressfirstparagraphindent}
-\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+\def\dosubheading#1{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
\suppressfirstparagraphindent}
-\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+\def\dosubsubheading#1{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
\suppressfirstparagraphindent}
% These macros generate a chapter, section, etc. heading only
@@ -5064,6 +3923,8 @@
%%% Args are the skip and penalty (usually negative)
\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+
%%% Define plain chapter starts, and page on/off switching for it
% Parameter controlling skip before chapter headings (if needed)
@@ -5071,20 +3932,7 @@
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
\def\chappager{\par\vfill\supereject}
-% Because \domark is called before \chapoddpage, the filler page will
-% get the headings for the next chapter, which is wrong. But we don't
-% care -- we just disable all headings on the filler page.
-\def\chapoddpage{%
- \chappager
- \ifodd\pageno \else
- \begingroup
- \evenheadline={\hfil}\evenfootline={\hfil}%
- \oddheadline={\hfil}\oddfootline={\hfil}%
- \hbox to 0pt{}%
- \chappager
- \endgroup
- \fi
-}
+\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
@@ -5107,83 +3955,57 @@
\CHAPPAGon
-% Chapter opening.
-%
+\def\CHAPFplain{%
+\global\let\chapmacro=\chfplain
+\global\let\centerchapmacro=\centerchfplain}
+
+% Normal chapter opening.
+%
% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
% Yappendix, Yomitfromtoc), #3 the chapter number.
-%
+%
% To test against our argument.
\def\Ynothingkeyword{Ynothing}
\def\Yomitfromtockeyword{Yomitfromtoc}
\def\Yappendixkeyword{Yappendix}
%
-\def\chapmacro#1#2#3{%
- % Insert the first mark before the heading break (see notes for \domark).
- \let\prevchapterdefs=\lastchapterdefs
- \let\prevsectiondefs=\lastsectiondefs
- \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
- \gdef\thissection{}}%
- %
- \def\temptype{#2}%
- \ifx\temptype\Ynothingkeyword
- \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
- \gdef\thischapter{\thischaptername}}%
- \else\ifx\temptype\Yomitfromtockeyword
- \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
- \gdef\thischapter{}}%
- \else\ifx\temptype\Yappendixkeyword
- \toks0={#1}%
- \xdef\lastchapterdefs{%
- \gdef\noexpand\thischaptername{\the\toks0}%
- \gdef\noexpand\thischapternum{\appendixletter}%
- \gdef\noexpand\thischapter{\putwordAppendix{} \noexpand\thischapternum:
- \noexpand\thischaptername}%
- }%
- \else
- \toks0={#1}%
- \xdef\lastchapterdefs{%
- \gdef\noexpand\thischaptername{\the\toks0}%
- \gdef\noexpand\thischapternum{\the\chapno}%
- \gdef\noexpand\thischapter{\putwordChapter{} \noexpand\thischapternum:
- \noexpand\thischaptername}%
- }%
- \fi\fi\fi
- %
- % Output the mark. Pass it through \safewhatsit, to take care of
- % the preceding space.
- \safewhatsit\domark
- %
- % Insert the chapter heading break.
+\def\chfplain#1#2#3{%
\pchapsepmacro
- %
- % Now the second mark, after the heading break. No break points
- % between here and the heading.
- \let\prevchapterdefs=\lastchapterdefs
- \let\prevsectiondefs=\lastsectiondefs
- \domark
- %
{%
\chapfonts \rm
%
- % Have to define \lastsection before calling \donoderef, because the
- % xref code eventually uses it. On the other hand, it has to be called
- % after \pchapsepmacro, or the headline will change too soon.
- \gdef\lastsection{#1}%
+ % Have to define \thissection before calling \donoderef, because the
+ % xref code eventually uses it, as \Ytitle. On the other hand, it
+ % has to be called after \pchapsepmacro, or the headline will change
+ % too soon.
+ \gdef\thissection{#1}%
+ \gdef\thischaptername{#1}%
%
% Only insert the separating space if we have a chapter/appendix
% number, and don't print the unnumbered ``number''.
+ \def\temptype{#2}%
\ifx\temptype\Ynothingkeyword
\setbox0 = \hbox{}%
\def\toctype{unnchap}%
+ \def\thischapter{#1}%
\else\ifx\temptype\Yomitfromtockeyword
\setbox0 = \hbox{}% contents like unnumbered, but no toc entry
\def\toctype{omit}%
+ \xdef\thischapter{}%
\else\ifx\temptype\Yappendixkeyword
\setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
\def\toctype{app}%
+ % We don't substitute the actual chapter name into \thischapter
+ % because we don't want its macros evaluated now. And we don't
+ % use \thissection because that changes with each section.
+ %
+ \xdef\thischapter{\putwordAppendix{} \appendixletter:
+ \noexpand\thischaptername}%
\else
\setbox0 = \hbox{#3\enspace}%
\def\toctype{numchap}%
+ \xdef\thischapter{\putwordChapter{} \the\chapno:
+ \noexpand\thischaptername}%
\fi\fi\fi
%
% Write the toc entry for this chapter. Must come before the
@@ -5199,7 +4021,6 @@
\donoderef{#2}%
%
% Typeset the actual heading.
- \nobreak % Avoid page breaks at the interline glue.
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
\hangindent=\wd0 \centerparametersmaybe
\unhbox0 #1\par}%
@@ -5210,40 +4031,45 @@
% @centerchap -- centered and unnumbered.
\let\centerparametersmaybe = \relax
-\def\centerparameters{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
-}
+\def\centerchfplain#1{{%
+ \def\centerparametersmaybe{%
+ \advance\rightskip by 3\rightskip
+ \leftskip = \rightskip
+ \parfillskip = 0pt
+ }%
+ \chfplain{#1}{Ynothing}{}%
+}}
+\CHAPFplain % The default
% I don't think this chapter style is supported any more, so I'm not
% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
-%
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-%
+%
\def\unnchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt\raggedright
\rm #1\hfill}}\bigskip \par\nobreak
}
+
\def\chfopen #1#2{\chapoddpage {\chapfonts
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
\par\penalty 5000 %
}
+
\def\centerchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt
\hfill {\rm #1}\hfill}}\bigskip \par\nobreak
}
+
\def\CHAPFopen{%
- \global\let\chapmacro=\chfopen
- \global\let\centerchapmacro=\centerchfopen}
+\global\let\chapmacro=\chfopen
+\global\let\centerchapmacro=\centerchfopen}
% Section titles. These macros combine the section number parts and
% call the generic \sectionheading to do the printing.
-%
+%
\newskip\secheadingskip
\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
@@ -5257,100 +4083,50 @@
% Print any size, any type, section title.
-%
+%
% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
% section number.
-%
-\def\seckeyword{sec}
-%
+%
\def\sectionheading#1#2#3#4{%
{%
% Switch to the right set of fonts.
\csname #2fonts\endcsname \rm
%
- \def\sectionlevel{#2}%
- \def\temptype{#3}%
- %
- % Insert first mark before the heading break (see notes for \domark).
- \let\prevsectiondefs=\lastsectiondefs
- \ifx\temptype\Ynothingkeyword
- \ifx\sectionlevel\seckeyword
- \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
- \gdef\thissection{\thissectionname}}%
- \fi
- \else\ifx\temptype\Yomitfromtockeyword
- % Don't redefine \thissection.
- \else\ifx\temptype\Yappendixkeyword
- \ifx\sectionlevel\seckeyword
- \toks0={#1}%
- \xdef\lastsectiondefs{%
- \gdef\noexpand\thissectionname{\the\toks0}%
- \gdef\noexpand\thissectionnum{#4}%
- \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum:
- \noexpand\thissectionname}%
- }%
- \fi
- \else
- \ifx\sectionlevel\seckeyword
- \toks0={#1}%
- \xdef\lastsectiondefs{%
- \gdef\noexpand\thissectionname{\the\toks0}%
- \gdef\noexpand\thissectionnum{#4}%
- \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum:
- \noexpand\thissectionname}%
- }%
- \fi
- \fi\fi\fi
- %
- % Output the mark. Pass it through \safewhatsit, to take care of
- % the preceding space.
- \safewhatsit\domark
- %
% Insert space above the heading.
\csname #2headingbreak\endcsname
%
- % Now the second mark, after the heading break. No break points
- % between here and the heading.
- \let\prevsectiondefs=\lastsectiondefs
- \domark
- %
% Only insert the space after the number if we have a section number.
+ \def\sectionlevel{#2}%
+ \def\temptype{#3}%
+ %
\ifx\temptype\Ynothingkeyword
\setbox0 = \hbox{}%
\def\toctype{unn}%
- \gdef\lastsection{#1}%
+ \gdef\thissection{#1}%
\else\ifx\temptype\Yomitfromtockeyword
% for @headings -- no section number, don't include in toc,
- % and don't redefine \lastsection.
+ % and don't redefine \thissection.
\setbox0 = \hbox{}%
\def\toctype{omit}%
\let\sectionlevel=\empty
\else\ifx\temptype\Yappendixkeyword
\setbox0 = \hbox{#4\enspace}%
\def\toctype{app}%
- \gdef\lastsection{#1}%
+ \gdef\thissection{#1}%
\else
\setbox0 = \hbox{#4\enspace}%
\def\toctype{num}%
- \gdef\lastsection{#1}%
+ \gdef\thissection{#1}%
\fi\fi\fi
%
- % Write the toc entry (before \donoderef). See comments in \chapmacro.
+ % Write the toc entry (before \donoderef). See comments in \chfplain.
\writetocentry{\toctype\sectionlevel}{#1}{#4}%
%
% Write the node reference (= pdf destination for pdftex).
- % Again, see comments in \chapmacro.
+ % Again, see comments in \chfplain.
\donoderef{#3}%
%
- % Interline glue will be inserted when the vbox is completed.
- % That glue will be a valid breakpoint for the page, since it'll be
- % preceded by a whatsit (usually from the \donoderef, or from the
- % \writetocentry if there was no node). We don't want to allow that
- % break, since then the whatsits could end up on page n while the
- % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000.
- \nobreak
- %
% Output the actual section heading.
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
\hangindent=\wd0 % zero if no section number
@@ -5368,14 +4144,14 @@
% glue accumulate. (Not a breakpoint because it's preceded by a
% discardable item.)
\vskip-\parskip
- %
- % This is purely so the last item on the list is a known \penalty >
- % 10000. This is so \startdefun can avoid allowing breakpoints after
- % section headings. Otherwise, it would insert a valid breakpoint between:
- %
+ %
+ % This \nobreak is purely so the last item on the list is a \penalty
+ % of 10000. This is so other code, for instance \parsebodycommon, can
+ % check for and avoid allowing breakpoints. Otherwise, it would
+ % insert a valid breakpoint between:
% @section sec-whatever
% @deffn def-whatever
- \penalty 10001
+ \nobreak
}
@@ -5384,14 +4160,14 @@
\newwrite\tocfile
% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
+% Called from @chapter, etc.
+%
% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
% We append the current node name (if any) and page number as additional
% arguments for the \{chap,sec,...}entry macros which will eventually
% read this. The node name is used in the pdf outlines as the
% destination to jump to.
-%
+%
% We open the .toc file for writing here instead of at @setfilename (or
% any other fixed time) so that @contents can be anywhere in the document.
% But if #1 is `omit', then we don't do anything. This is used for the
@@ -5409,11 +4185,11 @@
\fi
%
\iflinks
- {\atdummies
- \edef\temp{%
- \write\tocfile{ #1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
- \temp
- }%
+ \toks0 = {#2}%
+ \toks2 = \expandafter{\lastnode}%
+ \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
+ {\the\toks2}{\noexpand\folio}}}%
+ \temp
\fi
\fi
%
@@ -5426,31 +4202,6 @@
\ifpdf \global\pdfmakepagedesttrue \fi
}
-
-% These characters do not print properly in the Computer Modern roman
-% fonts, so we must take special care. This is more or less redundant
-% with the Texinfo input format setup at the end of this file.
-%
-\def\activecatcodes{%
- \catcode`\"=\active
- \catcode`\$=\active
- \catcode`\<=\active
- \catcode`\>=\active
- \catcode`\\=\active
- \catcode`\^=\active
- \catcode`\_=\active
- \catcode`\|=\active
- \catcode`\~=\active
-}
-
-
-% Read the toc file, which is essentially Texinfo input.
-\def\readtocfile{%
- \setupdatafile
- \activecatcodes
- \input \tocreadfilename
-}
-
\newskip\contentsrightmargin \contentsrightmargin=1in
\newcount\savepageno
\newcount\lastnegativepageno \lastnegativepageno = -1
@@ -5458,83 +4209,81 @@
% Prepare to read what we've written to \tocfile.
%
\def\startcontents#1{%
- % If @setchapternewpage on, and @headings double, the contents should
- % start on an odd page, unlike chapters. Thus, we maintain
- % \contentsalignmacro in parallel with \pagealignmacro.
- % From: Torbjorn Granlund <tege matematik su se>
- \contentsalignmacro
- \immediate\closeout\tocfile
- %
- % Don't need to put `Contents' or `Short Contents' in the headline.
- % It is abundantly clear what they are.
- \chapmacro{#1}{Yomitfromtoc}{}%
- %
- \savepageno = \pageno
- \begingroup % Set up to handle contents files properly.
- \raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
- %
- % Roman numerals for page numbers.
- \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+ % If @setchapternewpage on, and @headings double, the contents should
+ % start on an odd page, unlike chapters. Thus, we maintain
+ % \contentsalignmacro in parallel with \pagealignmacro.
+ % From: Torbjorn Granlund <tege matematik su se>
+ \contentsalignmacro
+ \immediate\closeout\tocfile
+ %
+ % Don't need to put `Contents' or `Short Contents' in the headline.
+ % It is abundantly clear what they are.
+ \def\thischapter{}%
+ \chapmacro{#1}{Yomitfromtoc}{}%
+ %
+ \savepageno = \pageno
+ \begingroup % Set up to handle contents files properly.
+ \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\ =11
+ % We can't do this, because then an actual ^ in a section
+ % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
+ %\catcode`\^=7 % to see ^^e4 as \"a etc. juha piuha ydi vtt fi
+ \raggedbottom % Worry more about breakpoints than the bottom.
+ \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+ %
+ % Roman numerals for page numbers.
+ \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
}
-% redefined for the two-volume lispref. We always output on
-% \jobname.toc even if this is redefined.
-%
-\def\tocreadfilename{\jobname.toc}
% Normal (long) toc.
-%
\def\contents{%
- \startcontents{\putwordTOC}%
- \openin 1 \tocreadfilename\space
- \ifeof 1 \else
- \readtocfile
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \ifeof 1 \else
- \pdfmakeoutlines
- \fi
- \closein 1
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
+ \startcontents{\putwordTOC}%
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.toc
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \pdfmakeoutlines
+ \endgroup
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
}
% And just the chapters.
\def\summarycontents{%
- \startcontents{\putwordShortTOC}%
- %
- \let\numchapentry = \shortchapentry
- \let\appentry = \shortchapentry
- \let\unnchapentry = \shortunnchapentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf
- \let\sl=\shortcontsl \let\tt=\shortconttt
- \rm
- \hyphenpenalty = 10000
- \advance\baselineskip by 1pt % Open it up a little.
- \def\numsecentry##1##2##3##4{}
- \let\appsecentry = \numsecentry
- \let\unnsecentry = \numsecentry
- \let\numsubsecentry = \numsecentry
- \let\appsubsecentry = \numsecentry
- \let\unnsubsecentry = \numsecentry
- \let\numsubsubsecentry = \numsecentry
- \let\appsubsubsecentry = \numsecentry
- \let\unnsubsubsecentry = \numsecentry
- \openin 1 \tocreadfilename\space
- \ifeof 1 \else
- \readtocfile
- \fi
- \closein 1
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
+ \startcontents{\putwordShortTOC}%
+ %
+ \let\numchapentry = \shortchapentry
+ \let\appentry = \shortchapentry
+ \let\unnchapentry = \shortunnchapentry
+ % We want a true roman here for the page numbers.
+ \secfonts
+ \let\rm=\shortcontrm \let\bf=\shortcontbf
+ \let\sl=\shortcontsl \let\tt=\shortconttt
+ \rm
+ \hyphenpenalty = 10000
+ \advance\baselineskip by 1pt % Open it up a little.
+ \def\numsecentry##1##2##3##4{}
+ \let\appsecentry = \numsecentry
+ \let\unnsecentry = \numsecentry
+ \let\numsubsecentry = \numsecentry
+ \let\appsubsecentry = \numsecentry
+ \let\unnsubsecentry = \numsecentry
+ \let\numsubsubsecentry = \numsecentry
+ \let\appsubsubsecentry = \numsecentry
+ \let\unnsubsubsecentry = \numsecentry
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.toc
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \endgroup
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
}
\let\shortcontents = \summarycontents
@@ -5547,7 +4296,7 @@
% But use \hss just in case.
% (This space doesn't include the extra space that gets added after
% the label; that gets put in by \shortchapentry above.)
- %
+ %
% We'd like to right-justify chapter numbers, but that looks strange
% with appendix letters. And right-justifying numbers and
% left-justifying letters looks strange when there is less than 10
@@ -5572,7 +4321,7 @@
% Appendices, in the main contents.
% Need the word Appendix, and a fixed-size box.
-%
+%
\def\appendixbox#1{%
% We use M since it's probably the widest letter.
\setbox0 = \hbox{\putwordAppendix{} M}%
@@ -5600,8 +4349,7 @@
\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
% This parameter controls the indentation of the various levels.
-% Same as \defaultparindent.
-\newdimen\tocindent \tocindent = 15pt
+\newdimen\tocindent \tocindent = 2pc
% Now for the actual typesetting. In all these, #1 is the text and #2 is the
% page number.
@@ -5632,8 +4380,17 @@
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup}
-% We use the same \entry macro as for the index entries.
-\let\tocentry = \entry
+% Final typesetting of a toc entry; we use the same \entry macro as for
+% the index entries, but we want to suppress hyphenation here. (We
+% can't do that in the \entry macro, since index entries might consist
+% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
+\def\tocentry#1#2{\begingroup
+ \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
+ % Do not use \turnoffactive in these arguments. Since the toc is
+ % typeset in cmr, characters such as _ would come out wrong; we
+ % have to do the usual translation tricks.
+ \entry{#1}{#2}%
+\endgroup}
% Space between chapter (or whatever) number and the title.
\def\labelspace{\hskip1em \relax}
@@ -5669,12 +4426,12 @@
{\tentt \global\dimen0 = 3em}% Width of the box.
\dimen2 = .55pt % Thickness of rules
% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
+\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
%
-\setbox\errorbox=\hbox to \dimen0{\hfil
+\global\setbox\errorbox=\hbox to \dimen0{\hfil
\hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
\advance\hsize by -2\dimen2 % Rules.
- \vbox{%
+ \vbox{
\hrule height\dimen2
\hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
\vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
@@ -5688,13 +4445,14 @@
% One exception: @ is still an escape character, so that @end tex works.
% But \@ or @@ will get a plain tex @ character.
-\envdef\tex{%
+\def\tex{\begingroup
\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
\catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
\catcode `\%=14
\catcode `\+=\other
\catcode `\"=\other
+ \catcode `\==\other
\catcode `\|=\other
\catcode `\<=\other
\catcode `\>=\other
@@ -5717,16 +4475,14 @@
\let\/=\ptexslash
\let\*=\ptexstar
\let\t=\ptext
- \let\frenchspacing=\plainfrenchspacing
%
\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
\def\ {@}%
-}
-% There is no need to define \Etex.
+\let\Etex=\endgroup}
% Define @lisp ... @end lisp.
-% @lisp environment forms a group so it can rebind things,
+% @lisp does a \begingroup so it can rebind things,
% including the definition of @end lisp (which normally is erroneous).
% Amount to narrow the margins by for @lisp.
@@ -5737,6 +4493,19 @@
% have any width.
\def\lisppar{\null\endgraf}
+% Make each space character in the input produce a normal interword
+% space in the output. Don't allow a line break at this space, as this
+% is used only in environments like @example, where each line of input
+% should produce a line of output anyway.
+%
+{\obeyspaces %
+\gdef\sepspaces{\obeyspaces\let =\tie}}
+
+% Define \obeyedspace to be our active space, whatever it is. This is
+% for use in \parsearg.
+{\sepspaces%
+\global\let\obeyedspace= }
+
% This space is always present above and below environments.
\newskip\envskipamount \envskipamount = 0pt
@@ -5746,8 +4515,7 @@
% start of the next paragraph will insert \parskip.
%
\def\aboveenvbreak{{%
- % =10000 instead of <10000 because of a special case in \itemzzz and
- % \sectionheading, q.v.
+ % =10000 instead of <10000 because of a special case in \itemzzz, q.v.
\ifnum \lastpenalty=10000 \else
\advance\envskipamount by \parskip
\endgraf
@@ -5755,7 +4523,7 @@
\removelastskip
% it's not a good place to break if the last penalty was \nobreak
% or better ...
- \ifnum\lastpenalty<10000 \penalty-50 \fi
+ \ifnum\lastpenalty>10000 \else \penalty-50 \fi
\vskip\envskipamount
\fi
\fi
@@ -5763,8 +4531,7 @@
\let\afterenvbreak = \aboveenvbreak
-% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will
-% also clear it, so that its embedded environments do the narrowing again.
+% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
\let\nonarrowing=\relax
% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
@@ -5788,52 +4555,52 @@
%
\newskip\lskip\newskip\rskip
-\envdef\cartouche{%
- \ifhmode\par\fi % can't be in the midst of a paragraph.
- \startsavinginserts
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt % we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
- % side, and for 6pt waste from
- % each corner char, and rule thickness
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing = t%
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \kern3pt
- \hsize=\cartinner
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
- \comment % For explanation, see the end of \def\group.
-}
+\def\cartouche{%
+\par % can't be in the midst of a paragraph.
+\begingroup
+ \lskip=\leftskip \rskip=\rightskip
+ \leftskip=0pt\rightskip=0pt %we want these *outside*.
+ \cartinner=\hsize \advance\cartinner by-\lskip
+ \advance\cartinner by-\rskip
+ \cartouter=\hsize
+ \advance\cartouter by 18.4pt % allow for 3pt kerns on either
+% side, and for 6pt waste from
+% each corner char, and rule thickness
+ \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+ % Flag to tell @lisp, etc., not to narrow margin.
+ \let\nonarrowing=\comment
+ \vbox\bgroup
+ \baselineskip=0pt\parskip=0pt\lineskip=0pt
+ \carttop
+ \hbox\bgroup
+ \hskip\lskip
+ \vrule\kern3pt
+ \vbox\bgroup
+ \hsize=\cartinner
+ \kern3pt
+ \begingroup
+ \baselineskip=\normbskip
+ \lineskip=\normlskip
+ \parskip=\normpskip
+ \vskip -\parskip
\def\Ecartouche{%
- \ifhmode\par\fi
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
- \checkinserts
-}
+ \endgroup
+ \kern3pt
+ \egroup
+ \kern3pt\vrule
+ \hskip\rskip
+ \egroup
+ \cartbot
+ \egroup
+\endgroup
+}}
% This macro is called at the beginning of all the @example variants,
% inside a group.
\def\nonfillstart{%
\aboveenvbreak
+ \inENV % This group ends at the end of the body
\hfuzz = 12pt % Don't be fussy
\sepspaces % Make spaces be word-separators rather than space tokens.
\let\par = \lisppar % don't ignore blank lines
@@ -5841,139 +4608,116 @@
\parskip = 0pt
\parindent = 0pt
\emergencystretch = 0pt % don't try to avoid overfull boxes
+ % @cartouche defines \nonarrowing to inhibit narrowing
+ % at next level down.
\ifx\nonarrowing\relax
\advance \leftskip by \lispnarrowing
\exdentamount=\lispnarrowing
- \else
- \let\nonarrowing = \relax
+ \let\exdent=\nofillexdent
+ \let\nonarrowing=\relax
\fi
- \let\exdent=\nofillexdent
}
-% If you want all examples etc. small: @set dispenvsize small.
-% If you want even small examples the full size: @set dispenvsize nosmall.
-% This affects the following displayed environments:
-% @example, @display, @format, @lisp
-%
-\def\smallword{small}
-\def\nosmallword{nosmall}
-\let\SETdispenvsize\relax
-\def\setnormaldispenv{%
- \ifx\SETdispenvsize\smallword
- % end paragraph for sake of leading, in case document has no blank
- % line. This is redundant with what happens in \aboveenvbreak, but
- % we need to do it before changing the fonts, and it's inconvenient
- % to change the fonts afterward.
- \ifnum \lastpenalty=10000 \else \endgraf \fi
- \smallexamplefonts \rm
- \fi
-}
-\def\setsmalldispenv{%
- \ifx\SETdispenvsize\nosmallword
- \else
- \ifnum \lastpenalty=10000 \else \endgraf \fi
- \smallexamplefonts \rm
- \fi
-}
+% Define the \E... control sequence only if we are inside the particular
+% environment, so the error checking in \end will work.
+%
+% To end an @example-like environment, we first end the paragraph (via
+% \afterenvbreak's vertical glue), and then the group. That way we keep
+% the zero \parskip that the environments set -- \parskip glue will be
+% inserted at the beginning of the next paragraph in the document, after
+% the environment.
+%
+\def\nonfillfinish{\afterenvbreak\endgroup}
-% We often define two environments, @foo and @smallfoo.
-% Let's do it by one command:
-\def\makedispenv #1#2{
- \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
- \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
- \expandafter\let\csname E#1\endcsname \afterenvbreak
- \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+% @lisp: indented, narrowed, typewriter font.
+\def\lisp{\begingroup
+ \nonfillstart
+ \let\Elisp = \nonfillfinish
+ \tt
+ \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+ \gobble % eat return
}
-% Define two synonyms:
-\def\maketwodispenvs #1#2#3{
- \makedispenv{#1}{#3}
- \makedispenv{#2}{#3}
-}
+% @example: Same as @lisp.
+\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
-%
% @smallexample and @smalllisp: use smaller fonts.
% Originally contributed by Pavel xerox
+\def\smalllisp{\begingroup
+ \def\Esmalllisp{\nonfillfinish\endgroup}%
+ \def\Esmallexample{\nonfillfinish\endgroup}%
+ \smallexamplefonts
+ \lisp
+}
+\let\smallexample = \smalllisp
+
+
+% @display: same as @lisp except keep current font.
%
-\maketwodispenvs {lisp}{example}{%
+\def\display{\begingroup
\nonfillstart
- \tt\quoteexpand
- \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
+ \let\Edisplay = \nonfillfinish
+ \gobble
}
-% @display/@smalldisplay: same as @lisp except keep current font.
%
-\makedispenv {display}{%
- \nonfillstart
- \gobble
+% @smalldisplay: @display plus smaller fonts.
+%
+\def\smalldisplay{\begingroup
+ \def\Esmalldisplay{\nonfillfinish\endgroup}%
+ \smallexamplefonts \rm
+ \display
}
-% @format/@smallformat: same as @display except don't narrow margins.
+% @format: same as @display except don't narrow margins.
%
-\makedispenv{format}{%
- \let\nonarrowing = t%
+\def\format{\begingroup
+ \let\nonarrowing = t
\nonfillstart
+ \let\Eformat = \nonfillfinish
\gobble
}
-
-% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
-\envdef\flushleft{%
- \let\nonarrowing = t%
- \nonfillstart
- \gobble
+%
+% @smallformat: @format plus smaller fonts.
+%
+\def\smallformat{\begingroup
+ \def\Esmallformat{\nonfillfinish\endgroup}%
+ \smallexamplefonts \rm
+ \format
}
-\let\Eflushleft = \afterenvbreak
+
+% @flushleft (same as @format).
+%
+\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
% @flushright.
%
-\envdef\flushright{%
- \let\nonarrowing = t%
+\def\flushright{\begingroup
+ \let\nonarrowing = t
\nonfillstart
+ \let\Eflushright = \nonfillfinish
\advance\leftskip by 0pt plus 1fill
\gobble
}
-\let\Eflushright = \afterenvbreak
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins. We keep \parskip nonzero in general, since
-% we're doing normal filling. So, when using \aboveenvbreak and
-% \afterenvbreak, temporarily make \parskip 0.
+% and narrows the margins.
%
-\envdef\quotation{%
+\def\quotation{%
+ \begingroup\inENV %This group ends at the end of the @quotation body
{\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
\parindent=0pt
+ % We have retained a nonzero parskip for the environment, since we're
+ % doing normal filling. So to avoid extra space below the environment...
+ \def\Equotation{\parskip = 0pt \nonfillfinish}%
%
% @cartouche defines \nonarrowing to inhibit narrowing at next level down.
\ifx\nonarrowing\relax
\advance\leftskip by \lispnarrowing
\advance\rightskip by \lispnarrowing
\exdentamount = \lispnarrowing
- \else
\let\nonarrowing = \relax
\fi
- \parsearg\quotationlabel
-}
-
-% We have retained a nonzero parskip for the environment, since we're
-% doing normal filling.
-%
-\def\Equotation{%
- \par
- \ifx\quotationauthor\undefined\else
- % indent a bit.
- \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
- \fi
- {\parskip=0pt \afterenvbreak}%
-}
-
-% If we're given an argument, typeset it in bold with a colon after.
-\def\quotationlabel#1{%
- \def\temp{#1}%
- \ifx\temp\empty \else
- {\bf #1: }%
- \fi
}
@@ -5995,7 +4739,7 @@
%
% [Knuth] p. 380
\def\uncatcodespecials{%
- \def\do##1{\catcode`##1=\other}\dospecials}
+ \def\do##1{\catcode`##1=12}\dospecials}
%
% [Knuth] pp. 380,381,391
% Disable Spanish ligatures ?` and !` of \tt font
@@ -6029,34 +4773,6 @@
\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
%
\def\starttabbox{\setbox0=\hbox\bgroup}
-
-% Allow an option to not replace quotes with a regular directed right
-% quote/apostrophe (char 0x27), but instead use the undirected quote
-% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it
-% the default, but it works for pasting with more pdf viewers (at least
-% evince), the lilypond developers report. xpdf does work with the
-% regular 0x27.
-%
-\def\codequoteright{%
- \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
- \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
- '%
- \else \char'15 \fi
- \else \char'15 \fi
-}
-%
-% and a similar option for the left quote char vs. a grave accent.
-% Modern fonts display ASCII 0x60 as a grave accent, so some people like
-% the code environments to do likewise.
-%
-\def\codequoteleft{%
- \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
- \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
- `%
- \else \char'22 \fi
- \else \char'22 \fi
-}
-%
\begingroup
\catcode`\^^I=\active
\gdef\tabexpand{%
@@ -6069,25 +4785,13 @@
\wd0=\dimen0 \box0 \starttabbox
}%
}
- \catcode`\'=\active
- \gdef\rquoteexpand{\catcode\rquoteChar=\active \def'{\codequoteright}}%
- %
- \catcode`\`=\active
- \gdef\lquoteexpand{\catcode\lquoteChar=\active \def`{\codequoteleft}}%
- %
- \gdef\quoteexpand{\rquoteexpand \lquoteexpand}%
\endgroup
-
-% start the verbatim environment.
\def\setupverbatim{%
- \let\nonarrowing = t%
- \nonfillstart
% Easiest (and conventionally used) font for verbatim
\tt
\def\par{\leavevmode\egroup\box0\endgraf}%
\catcode`\`=\active
\tabexpand
- \quoteexpand
% Respect line breaks,
% print special symbols as themselves, and
% make each space count
@@ -6104,7 +4808,7 @@
%
% [Knuth] p. 382; only eat outer {}
\begingroup
- \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+ \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
\gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
\endgroup
%
@@ -6121,6 +4825,13 @@
% we need not redefine '\', '{' and '}'.
%
% Inspired by LaTeX's verbatim command set [latex.ltx]
+%% Include LaTeX hack for completeness -- never know
+%% \begingroup
+%% \catcode`|=0 \catcode`[=1
+%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
+%% \catcode`\\=12|gdef|doverbatim#1 end verbatim[
+%% #1|endgroup|def|Everbatim[]|end[verbatim]]
+%% |endgroup
%
\begingroup
\catcode`\ =\active
@@ -6128,32 +4839,54 @@
% ignore everything up to the first ^^M, that's the newline at the end
% of the @verbatim input line itself. Otherwise we get an extra blank
% line in the output.
- \xdef\doverbatim#1^^M#2 end verbatim{#2\noexpand\end\gobble verbatim}%
- % We really want {...\end verbatim} in the body of the macro, but
- % without the active space; thus we have to use \xdef and \gobble.
+ \gdef\doverbatim#1^^M#2 end verbatim{#2\end{verbatim}}%
\endgroup
%
-\envdef\verbatim{%
- \setupverbatim\doverbatim
+\def\verbatim{%
+ \def\Everbatim{\nonfillfinish\endgroup}%
+ \begingroup
+ \nonfillstart
+ \advance\leftskip by -\defbodyindent
+ \begingroup\setupverbatim\doverbatim
}
-\let\Everbatim = \afterenvbreak
-
% @verbatiminclude FILE - insert text of file in verbatim environment.
%
-\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+% Allow normal characters that we make active in the argument (a file name).
+\def\verbatiminclude{%
+ \begingroup
+ \catcode`\\=\other
+ \catcode`~=\other
+ \catcode`^=\other
+ \catcode`_=\other
+ \catcode`|=\other
+ \catcode`<=\other
+ \catcode`>=\other
+ \catcode`+=\other
+ \parsearg\doverbatiminclude
+}
+\def\setupverbatiminclude{%
+ \begingroup
+ \nonfillstart
+ \advance\leftskip by -\defbodyindent
+ \begingroup\setupverbatim
+}
%
\def\doverbatiminclude#1{%
- {%
- \makevalueexpandable
- \setupverbatim
- \input #1
- \afterenvbreak
- }%
+ % Restore active chars for included file.
+ \endgroup
+ \begingroup
+ \let\value=\expandablevalue
+ \def\thisfile{#1}%
+ \expandafter\expandafter\setupverbatiminclude\input\thisfile
+ \endgroup
+ \nonfillfinish
+ \endgroup
}
% @copying ... @end copying.
-% Save the text away for @insertcopying later.
+% Save the text away for @insertcopying later. Many commands won't be
+% allowed in this context, but that's ok.
%
% We save the uninterpreted tokens, rather than creating a box.
% Saving the text in a box would be much easier, but then all the
@@ -6162,360 +4895,644 @@
% file; b) letting users define the frontmatter in as flexible order as
% possible is very desirable.
%
-\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
-\def\docopying#1 end copying{\endgroup\def\copyingtext{#1}}
-%
-\def\insertcopying{%
- \begingroup
- \parindent = 0pt % paragraph indentation looks wrong on title page
- \scanexp\copyingtext
- \endgroup
+\def\copying{\begingroup
+ % Define a command to swallow text until we reach ` end copying'.
+ % \ is the escape char in this texinfo.tex file, so it is the
+ % delimiter for the command; @ will be the escape char when we read
+ % it, but that doesn't matter.
+ \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}%
+ %
+ % We must preserve ^^M's in the input file; see \insertcopying below.
+ \catcode`\^^M = \active
+ \docopying
+}
+
+% What we do to finish off the copying text.
+%
+\def\enddocopying{\endgroup\ignorespaces}
+
+% @insertcopying. Here we must play games with ^^M's. On the one hand,
+% we need them to delimit commands such as ` end quotation', so they
+% must be active. On the other hand, we certainly don't want every
+% end-of-line to be a \par, as would happen with the normal active
+% definition of ^^M. On the third hand, two ^^M's in a row should still
+% generate a \par.
+%
+% Our approach is to make ^^M insert a space and a penalty1 normally;
+% then it can also check if \lastpenalty=1. If it does, then manually
+% do \par.
+%
+% This messes up the normal definitions of @c[omment], so we redefine
+% it. Similarly for @ignore. (These commands are used in the gcc
+% manual for man page generation.)
+%
+% Seems pretty fragile, most line-oriented commands will presumably
+% fail, but for the limited use of getting the copying text (which
+% should be quite simple) inserted, we can hope it's ok.
+%
+{\catcode`\^^M=\active %
+\gdef\insertcopying{\begingroup %
+ \parindent = 0pt % looks wrong on title page
+ \def^^M{%
+ \ifnum \lastpenalty=1 %
+ \par %
+ \else %
+ \space \penalty 1 %
+ \fi %
+ }%
+ %
+ % Fix @c[omment] for catcode 13 ^^M's.
+ \def\c##1^^M{\ignorespaces}%
+ \let\comment = \c %
+ %
+ % Don't bother jumping through all the hoops that \doignore does, it
+ % would be very hard since the catcodes are already set.
+ \long\def\ignore##1\end ignore{\ignorespaces}%
+ %
+ \copyingtext %
+\endgroup}%
}
-
\message{defuns,}
% @defun etc.
\newskip\defbodyindent \defbodyindent=.4in
\newskip\defargsindent \defargsindent=50pt
\newskip\deflastargmargin \deflastargmargin=18pt
-\newcount\defunpenalty
-% Start the processing of @deffn:
-\def\startdefun{%
- \ifnum\lastpenalty<10000
- \medbreak
- \defunpenalty=10003 % Will keep this @deffn together with the
- % following @def command, see below.
+\newcount\parencount
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+ \catcode`\(=\active \catcode`\)=\active
+ \catcode`\&=\active
+ \catcode`\[=\active \catcode`\]=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
+
+% Be sure that we always have a definition for `(', etc. For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+\global\let(=\lparen \global\let)=\rparen
+\global\let[=\lbrack \global\let]=\rbrack
+
+\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
+\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+% This is used to turn on special parens
+% but make & act ordinary (given that it's active).
+\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
+
+% Definitions of (, ) and & used in args for functions.
+% This is the definition of ( outside of all parentheses.
+\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
+ \global\advance\parencount by 1
+}
+%
+% This is the definition of ( when already inside a level of parens.
+\gdef\opnested{\char`\(\global\advance\parencount by 1 }
+%
+\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
+ % also in that case restore the outer-level definition of (.
+ \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
+ \global\advance \parencount by -1 }
+% If we encounter &foo, then turn on ()-hacking afterwards
+\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
+%
+\gdef\normalparens{\boldbrax\let&=\ampnr}
+} % End of definition inside \activeparens
+%% These parens (in \boldbrax) actually are a little bolder than the
+%% contained text. This is especially needed for [ and ]
+\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
+\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
+\let\ampnr = \&
+\def\lbrb{{\bf\char`\[}}
+\def\rbrb{{\bf\char`\]}}
+
+% Active &'s sneak into the index arguments, so make sure it's defined.
+{
+ \catcode`& = \active
+ \global\let& = \ampnr
+}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the function name.
+% #2 is the type of definition, such as "Function".
+%
+\def\defname#1#2{%
+ % How we'll output the type name. Putting it in brackets helps
+ % distinguish it from the body text that may end up on the next line
+ % just below it.
+ \ifempty{#2}%
+ \def\defnametype{}%
\else
- % If there are two @def commands in a row, we'll have a \nobreak,
- % which is there to keep the function description together with its
- % header. But if there's nothing but headers, we need to allow a
- % break somewhere. Check specifically for penalty 10002, inserted
- % by \printdefunline, instead of 10000, since the sectioning
- % commands also insert a nobreak penalty, and we don't want to allow
- % a break between a section heading and a defun.
- %
- % As a minor refinement, we avoid "club" headers by signalling
- % with penalty of 10003 after the very first @deffn in the
- % sequence (see above), and penalty of 10002 after any following
- % @def command.
- \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
- %
- % Similarly, after a section heading, do not allow a break.
- % But do insert the glue.
- \medskip % preceded by discardable penalty, so not a breakpoint
+ \def\defnametype{[\rm #2]}%
\fi
%
+ % Get the values of \leftskip and \rightskip as they were outside the @def...
+ \dimen2=\leftskip
+ \advance\dimen2 by -\defbodyindent
+ %
+ % Figure out values for the paragraph shape.
+ \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}%
+ \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
+ \dimen1=\hsize \advance \dimen1 by -\defargsindent % size for continuations
+ \parshape 2 0in \dimen0 \defargsindent \dimen1
+ %
+ % Output arg 2 ("Function" or some such) but stuck inside a box of
+ % width 0 so it does not interfere with linebreaking.
+ \noindent
+ %
+ {% Adjust \hsize to exclude the ambient margins,
+ % so that \rightline will obey them.
+ \advance \hsize by -\dimen2
+ \dimen3 = 0pt % was -1.25pc
+ \rlap{\rightline{\defnametype\kern\dimen3}}%
+ }%
+ %
+ % Allow all lines to be underfull without complaint:
+ \tolerance=10000 \hbadness=10000
+ \advance\leftskip by -\defbodyindent
+ \exdentamount=\defbodyindent
+ {\df #1}\enskip % output function name
+ % \defunargs will be called next to output the arguments, if any.
+}
+
+% Common pieces to start any @def...
+% #1 is the \E... control sequence to end the definition (which we define).
+% #2 is the \...x control sequence (which our caller defines).
+% #3 is the control sequence to process the header, such as \defunheader.
+%
+\def\parsebodycommon#1#2#3{%
+ \begingroup\inENV
+ % If there are two @def commands in a row, we'll have a \nobreak,
+ % which is there to keep the function description together with its
+ % header. But if there's nothing but headers, we need to allow a
+ % break somewhere. Check for penalty 10002 (inserted by
+ % \defargscommonending) instead of 10000, since the sectioning
+ % commands insert a \penalty10000, and we don't want to allow a break
+ % between a section heading and a defun.
+ \ifnum\lastpenalty=10002 \penalty2000 \fi
+ %
+ % Similarly, after a section heading, do not allow a break.
+ % But do insert the glue.
+ \ifnum\lastpenalty<10000 \medbreak
+ \else \medskip % preceded by discardable penalty, so not a breakpoint
+ \fi
+ %
+ % Define the \E... end token that this defining construct specifies
+ % so that it will exit this group.
+ \def#1{\endgraf\endgroup\medbreak}%
+ %
\parindent=0in
\advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
}
-\def\dodefunx#1{%
- % First, check whether we are in the right environment:
- \checkenv#1%
- %
- % As above, allow line break if we have multiple x headers in a row.
- % It's not a great place, though.
- \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
+% Common part of the \...x definitions.
+%
+\def\defxbodycommon{%
+ % As with \parsebodycommon above, allow line break if we have multiple
+ % x headers in a row. It's not a great place, though.
+ \ifnum\lastpenalty=10002 \penalty2000 \fi
%
- % And now, it's time to reuse the body of the original defun:
- \expandafter\gobbledefun#1%
+ \begingroup\obeylines
}
-\def\gobbledefun#1\startdefun{}
-% \printdefunline \deffnheader{text}
+% Process body of @defun, @deffn, @defmac, etc.
%
-\def\printdefunline#1#2{%
- \begingroup
- % call \deffnheader:
- #1#2 \endheader
- % common ending:
- \interlinepenalty = 10000
- \advance\rightskip by 0pt plus 1fil
- \endgraf
- \nobreak\vskip -\parskip
- \penalty\defunpenalty % signal to \startdefun and \dodefunx
- % Some of the @defun-type tags do not enable magic parentheses,
- % rendering the following check redundant. But we don't optimize.
- \checkparencounts
- \endgroup
+\def\defparsebody#1#2#3{%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2{\defxbodycommon \activeparens \spacesplit#3}%
+ \catcode\equalChar=\active
+ \begingroup\obeylines\activeparens
+ \spacesplit#3%
}
-\def\Edefun{\endgraf\medbreak}
-
-% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remainnig is to define \deffnheader.
+% #1, #2, #3 are the common arguments (see \parsebodycommon above).
+% #4, delimited by the space, is the class name.
%
-\def\makedefun#1{%
- \expandafter\let\csname E#1\endcsname = \Edefun
- \edef\temp{\noexpand\domakedefun
- \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
- \temp
+\def\defmethparsebody#1#2#3#4 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}%
+ \begingroup\obeylines\activeparens
+ % The \empty here prevents misinterpretation of a construct such as
+ % @deffn {whatever} {Enharmonic comma}
+ % See comments at \deftpparsebody, although in our case we don't have
+ % to remove the \empty afterwards, since it is empty.
+ \spacesplit{#3{#4}}\empty
}
-% \domakedefun \deffn \deffnx \deffnheader
+% Used for @deftypemethod and @deftypeivar.
+% #1, #2, #3 are the common arguments (see \defparsebody).
+% #4, delimited by a space, is the class name.
+% #5 is the method's return type.
%
-% Define \deffn and \deffnx, without parameters.
-% \deffnheader has to be defined explicitly.
+\def\deftypemethparsebody#1#2#3#4 #5 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}%
+ \begingroup\obeylines\activeparens
+ \spacesplit{#3{#4}{#5}}%
+}
+
+% Used for @deftypeop. The change from \deftypemethparsebody is an
+% extra argument at the beginning which is the `category', instead of it
+% being the hardwired string `Method' or `Instance Variable'. We have
+% to account for this both in the \...x definition and in parsing the
+% input at hand. Thus also need a control sequence (passed as #5) for
+% the \E... definition to assign the category name to.
%
-\def\domakedefun#1#2#3{%
- \envdef#1{%
- \startdefun
- \parseargusing\activeparens{\printdefunline#3}%
- }%
- \def#2{\dodefunx#1}%
- \def#3%
+\def\deftypeopparsebody#1#2#3#4#5 #6 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 ##3 {\def#4{##1}%
+ \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}%
+ \begingroup\obeylines\activeparens
+ \spacesplit{#3{#5}{#6}}%
}
-%%% Untyped functions:
+% For @defop.
+\def\defopparsebody #1#2#3#4#5 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 {\def#4{##1}%
+ \defxbodycommon \activeparens \spacesplit{#3{##2}}}%
+ \begingroup\obeylines\activeparens
+ \spacesplit{#3{#5}}%
+}
-% @deffn category name args
-\makedefun{deffn}{\deffngeneral{}}
+% These parsing functions are similar to the preceding ones
+% except that they do not make parens into active characters.
+% These are used for "variables" since they have no arguments.
+%
+\def\defvarparsebody #1#2#3{%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2{\defxbodycommon \spacesplit#3}%
+ \catcode\equalChar=\active
+ \begingroup\obeylines
+ \spacesplit#3%
+}
-% @deffn category class name args
-\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+% @defopvar.
+\def\defopvarparsebody #1#2#3#4#5 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 {\def#4{##1}%
+ \defxbodycommon \spacesplit{#3{##2}}}%
+ \begingroup\obeylines
+ \spacesplit{#3{#5}}%
+}
-% \defopon {category on}class name args
-\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+\def\defvrparsebody#1#2#3#4 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
+ \begingroup\obeylines
+ \spacesplit{#3{#4}}%
+}
-% \deffngeneral {subind}category name args
+% This loses on ` deftp {Data Type} {struct termios}' -- it thinks the
+% type is just `struct', because we lose the braces in `{struct
+% termios}' when \spacesplit reads its undelimited argument. Sigh.
+% \let\deftpparsebody=\defvrparsebody
+%
+% So, to get around this, we put \empty in with the type name. That
+% way, TeX won't find exactly `{...}' as an undelimited argument, and
+% won't strip off the braces.
%
-\def\deffngeneral#1#2 #3 #4\endheader{%
- % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
- \dosubind{fn}{\code{#3}}{#1}%
- \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+\def\deftpparsebody #1#2#3#4 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
+ \begingroup\obeylines
+ \spacesplit{\parsetpheaderline{#3{#4}}}\empty
}
-%%% Typed functions:
+% Fine, but then we have to eventually remove the \empty *and* the
+% braces (if any). That's what this does.
+%
+\def\removeemptybraces\empty#1\relax{#1}
-% @deftypefn category type name args
-\makedefun{deftypefn}{\deftypefngeneral{}}
+% After \spacesplit has done its work, this is called -- #1 is the final
+% thing to call, #2 the type name (which starts with \empty), and #3
+% (which might be empty) the arguments.
+%
+\def\parsetpheaderline#1#2#3{%
+ #1{\removeemptybraces#2\relax}{#3}%
+}%
-% @deftypeop category class type name args
-\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+% Split up #2 (the rest of the input line) at the first space token.
+% call #1 with two arguments:
+% the first is all of #2 before the space token,
+% the second is all of #2 after that space token.
+% If #2 contains no space token, all of it is passed as the first arg
+% and the second is passed as empty.
+%
+{\obeylines %
+ \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}%
+ \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{%
+ \ifx\relax #3%
+ #1{#2}{}%
+ \else %
+ #1{#2}{#3#4}%
+ \fi}%
+}
-% \deftypeopon {category on}class type name args
-\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+% Define @defun.
-% \deftypefngeneral {subind}category type name args
+% This is called to end the arguments processing for all the @def... commands.
%
-\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{fn}{\code{#4}}{#1}%
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+\def\defargscommonending{%
+ \interlinepenalty = 10000
+ \advance\rightskip by 0pt plus 1fil
+ \endgraf
+ \nobreak\vskip -\parskip
+ \penalty 10002 % signal to \parsebodycommon and \defxbodycommon.
}
-%%% Typed variables:
+% This expands the args and terminates the paragraph they comprise.
+%
+\def\defunargs#1{\functionparens \sl
+% Expand, preventing hyphenation at `-' chars.
+% Note that groups don't affect changes in \hyphenchar.
+% Set the font temporarily and use \font in case \setfont made \tensl a macro.
+{\tensl\hyphenchar\font=0}%
+#1%
+{\tensl\hyphenchar\font=45}%
+\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
+ \defargscommonending
+}
-% @deftypevr category type var args
-\makedefun{deftypevr}{\deftypecvgeneral{}}
+\def\deftypefunargs #1{%
+% Expand, preventing hyphenation at `-' chars.
+% Note that groups don't affect changes in \hyphenchar.
+% Use \boldbraxnoamp, not \functionparens, so that & is not special.
+\boldbraxnoamp
+\tclose{#1}% avoid \code because of side effects on active chars
+ \defargscommonending
+}
-% @deftypecv category class type var args
-\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+% Do complete processing of one @defun or @defunx line already parsed.
-% \deftypecvof {category of}class type var args
-\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+% @deffn Command forward-char nchars
-% \deftypecvgeneral {subind}category type var args
-%
-\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{vr}{\code{#4}}{#1}%
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
+
+\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
+\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
-%%% Untyped variables:
+% @defun == @deffn Function
-% @defvr category var args
-\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+\def\defun{\defparsebody\Edefun\defunx\defunheader}
+
+\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
+\begingroup\defname {#1}{\putwordDeffunc}%
+\defunargs {#2}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
+}
-% @defcv category class var args
-\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+% @deftypefun int foobar (int @var{foo}, float @var{bar})
-% \defcvof {category of}class var args
-\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
-%%% Type:
-% @deftp category name args
-\makedefun{deftp}#1 #2 #3\endheader{%
- \doind{tp}{\code{#2}}%
- \defname{#1}{}{#2}\defunargs{#3\unskip}%
+% #1 is the data type. #2 is the name and args.
+\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
+% #1 is the data type, #2 the name, #3 the args.
+\def\deftypefunheaderx #1#2 #3\relax{%
+\doind {fn}{\code{#2}}% Make entry in function index
+\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}%
+\deftypefunargs {#3}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
-% Remaining @defun-like shortcuts:
-\makedefun{defun}{\deffnheader{\putwordDeffunc} }
-\makedefun{defmac}{\deffnheader{\putwordDefmac} }
-\makedefun{defspec}{\deffnheader{\putwordDefspec} }
-\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
-\makedefun{defvar}{\defvrheader{\putwordDefvar} }
-\makedefun{defopt}{\defvrheader{\putwordDefopt} }
-\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
-\makedefun{defmethod}{\defopon\putwordMethodon}
-\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
-\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
-\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
-% \defname, which formats the name of the @def (not the args).
-% #1 is the category, such as "Function".
-% #2 is the return type, if any.
-% #3 is the function name.
+\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
+
+% \defheaderxcond#1\relax$.$
+% puts #1 in @code, followed by a space, but does nothing if #1 is null.
+\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi}
+
+% #1 is the classification. #2 is the data type. #3 is the name and args.
+\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
+% #1 is the classification, #2 the data type, #3 the name, #4 the args.
+\def\deftypefnheaderx #1#2#3 #4\relax{%
+\doind {fn}{\code{#3}}% Make entry in function index
+\begingroup
+\normalparens % notably, turn off `&' magic, which prevents
+% at least some C++ text from working
+\defname {\defheaderxcond#2\relax$.$#3}{#1}%
+\deftypefunargs {#4}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
+}
+
+% @defmac == @deffn Macro
+
+\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
+
+\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
+\begingroup\defname {#1}{\putwordDefmac}%
+\defunargs {#2}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
+}
+
+% @defspec == @deffn Special Form
+
+\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
+
+\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
+\begingroup\defname {#1}{\putwordDefspec}%
+\defunargs {#2}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
+}
+
+% @defop CATEGORY CLASS OPERATION ARG...
%
-% We are followed by (but not passed) the arguments, if any.
+\def\defop #1 {\def\defoptype{#1}%
+\defopparsebody\Edefop\defopx\defopheader\defoptype}
%
-\def\defname#1#2#3{%
- % Get the values of \leftskip and \rightskip as they were outside the @def...
- \advance\leftskip by -\defbodyindent
- %
- % How we'll format the type name. Putting it in brackets helps
- % distinguish it from the body text that may end up on the next line
- % just below it.
- \def\temp{#1}%
- \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
- %
- % Figure out line sizes for the paragraph shape.
- % The first line needs space for \box0; but if \rightskip is nonzero,
- % we need only space for the part of \box0 which exceeds it:
- \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
- % The continuations:
- \dimen2=\hsize \advance\dimen2 by -\defargsindent
- % (plain.tex says that \dimen1 should be used only as global.)
- \parshape 2 0in \dimen0 \defargsindent \dimen2
- %
- % Put the type name to the right margin.
- \noindent
- \hbox to 0pt{%
- \hfil\box0 \kern-\hsize
- % \hsize has to be shortened this way:
- \kern\leftskip
- % Intentionally do not respect \rightskip, since we need the space.
- }%
- %
- % Allow all lines to be underfull without complaint:
- \tolerance=10000 \hbadness=10000
- \exdentamount=\defbodyindent
- {%
- % defun fonts. We use typewriter by default (used to be bold) because:
- % . we're printing identifiers, they should be in tt in principle.
- % . in languages with many accents, such as Czech or French, it's
- % common to leave accents off identifiers. The result looks ok in
- % tt, but exceedingly strange in rm.
- % . we don't want -- and --- to be treated as ligatures.
- % . this still does not fix the ?` and !` ligatures, but so far no
- % one has made identifiers using them :).
- \df \tt
- \def\temp{#2}% return value type
- \ifx\temp\empty\else \tclose{\temp} \fi
- #3% output function name
- }%
- {\rm\enskip}% hskip 0.5 em of \tenrm
- %
- \boldbrax
- % arguments will be output next, if any.
+\def\defopheader#1#2#3{%
+ \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry
+ \begingroup
+ \defname{#2}{\defoptype\ \putwordon\ #1}%
+ \defunargs{#3}%
+ \endgroup
}
-% Print arguments in slanted roman (not ttsl), inconsistently with using
-% tt for the name. This is because literal text is sometimes needed in
-% the argument list (groff manual), and ttsl and tt are not very
-% distinguishable. Prevent hyphenation at `-' chars.
+% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
%
-\def\defunargs#1{%
- % use sl by default (not ttsl),
- % tt for the names.
- \df \sl \hyphenchar\font=0
- %
- % On the other hand, if an argument has two dashes (for instance), we
- % want a way to get ttsl. Let's try @var for that.
- \let\var=\ttslanted
- #1%
- \sl\hyphenchar\font=45
+\def\deftypeop #1 {\def\deftypeopcategory{#1}%
+ \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
+ \deftypeopcategory}
+%
+% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
+\def\deftypeopheader#1#2#3#4{%
+ \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$.$#3}
+ {\deftypeopcategory\ \putwordon\ \code{#1}}%
+ \deftypefunargs{#4}%
+ \endgroup
}
-% We want ()&[] to print specially on the defun line.
+% @deftypemethod CLASS TYPE METHOD ARG...
%
-\def\activeparens{%
- \catcode`\(=\active \catcode`\)=\active
- \catcode`\[=\active \catcode`\]=\active
- \catcode`\&=\active
+\def\deftypemethod{%
+ \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
+%
+% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
+\def\deftypemethodheader#1#2#3#4{%
+ \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}%
+ \deftypefunargs{#4}%
+ \endgroup
}
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-% Be sure that we always have a definition for `(', etc. For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-{
- \activeparens
- \global\let(=\lparen \global\let)=\rparen
- \global\let[=\lbrack \global\let]=\rbrack
- \global\let& = \&
+% @deftypeivar CLASS TYPE VARNAME
+%
+\def\deftypeivar{%
+ \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
+%
+% #1 is the class name, #2 the data type, #3 the variable name.
+\def\deftypeivarheader#1#2#3{%
+ \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$.$#3}
+ {\putwordInstanceVariableof\ \code{#1}}%
+ \defvarargs{#3}%
+ \endgroup
+}
- \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
- \gdef\magicamp{\let&=\amprm}
+% @defmethod == @defop Method
+%
+\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
+%
+% #1 is the class name, #2 the method name, #3 the args.
+\def\defmethodheader#1#2#3{%
+ \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{#2}{\putwordMethodon\ \code{#1}}%
+ \defunargs{#3}%
+ \endgroup
}
-\newcount\parencount
+% @defcv {Class Option} foo-class foo-flag
-% If we encounter &foo, then turn on ()-hacking afterwards
-\newif\ifampseen
-\def\amprm#1 {\ampseentrue{\bf\ }}
+\def\defcv #1 {\def\defcvtype{#1}%
+\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
-\def\parenfont{%
- \ifampseen
- % At the first level, print parens in roman,
- % otherwise use the default font.
- \ifnum \parencount=1 \rm \fi
- \else
- % The \sf parens (in \boldbrax) actually are a little bolder than
- % the contained text. This is especially needed for [ and ] .
- \sf
- \fi
+\def\defcvarheader #1#2#3{%
+ \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry
+ \begingroup
+ \defname{#2}{\defcvtype\ \putwordof\ #1}%
+ \defvarargs{#3}%
+ \endgroup
}
-\def\infirstlevel#1{%
- \ifampseen
- \ifnum\parencount=1
- #1%
- \fi
- \fi
+
+% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
+%
+\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
+%
+\def\defivarheader#1#2#3{%
+ \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index
+ \begingroup
+ \defname{#2}{\putwordInstanceVariableof\ #1}%
+ \defvarargs{#3}%
+ \endgroup
}
-\def\bfafterword#1 {#1 \bf}
-\def\opnr{%
- \global\advance\parencount by 1
- {\parenfont(}%
- \infirstlevel \bfafterword
+% @defvar
+% First, define the processing that is wanted for arguments of @defvar.
+% This is actually simple: just print them in roman.
+% This must expand the args and terminate the paragraph they make up
+\def\defvarargs #1{\normalparens #1%
+ \defargscommonending
}
-\def\clnr{%
- {\parenfont)}%
- \infirstlevel \sl
- \global\advance\parencount by -1
-}
-
-\newcount\brackcount
-\def\lbrb{%
- \global\advance\brackcount by 1
- {\bf[}%
-}
-\def\rbrb{%
- {\bf]}%
- \global\advance\brackcount by -1
-}
-
-\def\checkparencounts{%
- \ifnum\parencount=0 \else \badparencount \fi
- \ifnum\brackcount=0 \else \badbrackcount \fi
-}
-% these should not use \errmessage; the glibc manual, at least, actually
-% has such constructs (when documenting function pointers).
-\def\badparencount{%
- \message{Warning: unbalanced parentheses in @def...}%
- \global\parencount=0
-}
-\def\badbrackcount{%
- \message{Warning: unbalanced square brackets in @def...}%
- \global\brackcount=0
+
+% @defvr Counter foo-count
+
+\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
+
+\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
+\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
+
+% @defvar == @defvr Variable
+
+\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
+
+\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
+\begingroup\defname {#1}{\putwordDefvar}%
+\defvarargs {#2}\endgroup %
}
+% @defopt == @defvr {User Option}
+
+\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
+
+\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
+\begingroup\defname {#1}{\putwordDefopt}%
+\defvarargs {#2}\endgroup %
+}
+
+% @deftypevar int foobar
+
+\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
+
+% #1 is the data type. #2 is the name, perhaps followed by text that
+% is actually part of the data type, which should not be put into the index.
+\def\deftypevarheader #1#2{%
+\dovarind#2 \relax% Make entry in variables index
+\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}%
+ \defargscommonending
+\endgroup}
+\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
+
+% @deftypevr {Global Flag} int enable
+
+\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
+
+\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
+\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1}
+ \defargscommonending
+\endgroup}
+
+% Now define @deftp
+% Args are printed in bold, a slight difference from @defvar.
+
+\def\deftpargs #1{\bf \defvarargs{#1}}
+
+% @deftp Class window height width ...
+
+\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
+
+\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
+\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
+
+% These definitions are used if you use @defunx (etc.)
+% anywhere other than immediately after a @defun or @defunx.
+%
+\def\defcvx#1 {\errmessage{ defcvx in invalid context}}
+\def\deffnx#1 {\errmessage{ deffnx in invalid context}}
+\def\defivarx#1 {\errmessage{ defivarx in invalid context}}
+\def\defmacx#1 {\errmessage{ defmacx in invalid context}}
+\def\defmethodx#1 {\errmessage{ defmethodx in invalid context}}
+\def\defoptx #1 {\errmessage{ defoptx in invalid context}}
+\def\defopx#1 {\errmessage{ defopx in invalid context}}
+\def\defspecx#1 {\errmessage{ defspecx in invalid context}}
+\def\deftpx#1 {\errmessage{ deftpx in invalid context}}
+\def\deftypefnx#1 {\errmessage{ deftypefnx in invalid context}}
+\def\deftypefunx#1 {\errmessage{ deftypefunx in invalid context}}
+\def\deftypeivarx#1 {\errmessage{ deftypeivarx in invalid context}}
+\def\deftypemethodx#1 {\errmessage{ deftypemethodx in invalid context}}
+\def\deftypeopx#1 {\errmessage{ deftypeopx in invalid context}}
+\def\deftypevarx#1 {\errmessage{ deftypevarx in invalid context}}
+\def\deftypevrx#1 {\errmessage{ deftypevrx in invalid context}}
+\def\defunx#1 {\errmessage{ defunx in invalid context}}
+\def\defvarx#1 {\errmessage{ defvarx in invalid context}}
+\def\defvrx#1 {\errmessage{ defvrx in invalid context}}
+
\message{macros,}
% @macro.
@@ -6523,68 +5540,42 @@
% To do this right we need a feature of e-TeX, \scantokens,
% which we arrange to emulate with a temporary file in ordinary TeX.
\ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scantokens#1{%
- \toks0={#1}%
- \immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{\the\toks0}%
- \immediate\closeout\macscribble
- \input \jobname.tmp
- }
-\fi
-
-\def\scanmacro#1{%
- \begingroup
- \newlinechar`\^^M
- \let\xeatspaces\eatspaces
- % Undo catcode changes of \startcontents and \doprintindex
- % When called from @insertcopying or (short)caption, we need active
- % backslash to get it printed correctly. Previously, we had
- % \catcode`\\=\other instead. We'll see whether a problem appears
- % with macro expansion. --kasal, 19aug04
- \catcode`\ =0 \catcode`\\=\active \escapechar=`\@
- % ... and \example
- \spaceisspace
- %
- % Append \endinput to make sure that TeX does not see the ending newline.
- % I've verified that it is necessary both for e-TeX and for ordinary TeX
- % --kasal, 29nov03
- \scantokens{#1\endinput}%
- \endgroup
-}
-
-\def\scanexp#1{%
- \edef\temp{\noexpand\scanmacro{#1}}%
- \temp
+ \newwrite\macscribble
+ \def\scanmacro#1{%
+ \begingroup \newlinechar`\^^M
+ % Undo catcode changes of \startcontents and \doprintindex
+ \catcode`\ =0 \catcode`\\=\other \escapechar=`\@
+ % Append \endinput to make sure that TeX does not see the ending newline.
+ \toks0={#1\endinput}%
+ \immediate\openout\macscribble=\jobname.tmp
+ \immediate\write\macscribble{\the\toks0}%
+ \immediate\closeout\macscribble
+ \let\xeatspaces\eatspaces
+ \input \jobname.tmp
+ \endgroup
}
+\else
+\def\scanmacro#1{%
+\begingroup \newlinechar`\^^M
+% Undo catcode changes of \startcontents and \doprintindex
+\catcode`\ =0 \catcode`\\=\other \escapechar=`\@
+\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
+\fi
\newcount\paramno % Count of parameters
\newtoks\macname % Macro name
\newif\ifrecursive % Is it recursive?
-
-% List of all defined macros in the form
-% \definedummyword\macro1\definedummyword\macro2...
-% Currently is also contains all @aliases; the list can be split
-% if there is a need.
-\def\macrolist{}
-
-% Add the macro to \macrolist
-\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
-\def\addtomacrolistxxx#1{%
- \toks0 = \expandafter{\macrolist\definedummyword#1}%
- \xdef\macrolist{\the\toks0}%
-}
+\def\macrolist{} % List of all defined macros in the form
+ % \do\macro1\do\macro2...
% Utility routines.
-% This does \let #1 = #2, with \csnames; that is,
-% \let \csname#1\endcsname = \csname#2\endcsname
-% (except of course we have to play expansion games).
-%
+% Thisdoes \let #1 = #2, except with \csnames.
\def\cslet#1#2{%
- \expandafter\let
- \csname#1\expandafter\endcsname
- \csname#2\endcsname
-}
+\expandafter\expandafter
+\expandafter\let
+\expandafter\expandafter
+\csname#1\endcsname
+\csname#2\endcsname}
% Trim leading and trailing spaces off a string.
% Concepts from aro-bend problem 15 (see CTAN).
@@ -6607,45 +5598,34 @@
% all characters are catcode 10, 11 or 12, except \ which is active
% (as in normal texinfo). It is necessary to change the definition of \.
-% Non-ASCII encodings make 8-bit characters active, so un-activate
-% them to avoid their expansion. Must do this non-globally, to
-% confine the change to the current group.
-
% It's necessary to have hard CRs when the macro is executed. This is
% done by making ^^M (\endlinechar) catcode 12 when reading the macro
% body, and then making it the \newlinechar in \scanmacro.
-\def\scanctxt{%
- \catcode`\"=\other
- \catcode`\+=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\ =\other
+\def\macrobodyctxt{%
+ \catcode`\~=\other
\catcode`\^=\other
\catcode`\_=\other
\catcode`\|=\other
- \catcode`\~=\other
- \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
-}
-
-\def\scanargctxt{%
- \scanctxt
- \catcode`\\=\other
- \catcode`\^^M=\other
-}
-
-\def\macrobodyctxt{%
- \scanctxt
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\+=\other
\catcode`\{=\other
\catcode`\}=\other
+ \catcode`\ =\other
\catcode`\^^M=\other
- \usembodybackslash
-}
+ \usembodybackslash}
\def\macroargctxt{%
- \scanctxt
- \catcode`\\=\other
-}
+ \catcode`\~=\other
+ \catcode`\^=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\+=\other
+ \catcode`\ =\other
+ \catcode`\\=\other}
% \mbodybackslash is the definition of \ in @macro bodies.
% It maps \foo\ => \csname macarg.foo\endcsname => #N
@@ -6676,21 +5656,25 @@
\else \errmessage{Macro name \the\macname\space already defined}\fi
\global\cslet{macsave.\the\macname}{\the\macname}%
\global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
- \addtomacrolist{\the\macname}%
+ % Add the macroname to \macrolist
+ \toks0 = \expandafter{\macrolist\do}%
+ \xdef\macrolist{\the\toks0
+ \expandafter\noexpand\csname\the\macname\endcsname}%
\fi
\begingroup \macrobodyctxt
\ifrecursive \expandafter\parsermacbody
\else \expandafter\parsemacbody
\fi}
-\parseargdef\unmacro{%
+\def\unmacro{\parsearg\dounmacro}
+\def\dounmacro#1{%
\if1\csname ismacro.#1\endcsname
\global\cslet{#1}{macsave.#1}%
\global\expandafter\let \csname ismacro.#1\endcsname=0%
% Remove the macro name from \macrolist:
\begingroup
\expandafter\let\csname#1\endcsname \relax
- \let\definedummyword\unmacrodo
+ \let\do\unmacrodo
\xdef\macrolist{\macrolist}%
\endgroup
\else
@@ -6702,10 +5686,10 @@
% macro definitions that have been changed to \relax.
%
\def\unmacrodo#1{%
- \ifx #1\relax
+ \ifx#1\relax
% remove this
\else
- \noexpand\definedummyword \noexpand#1%
+ \noexpand\do \noexpand #1%
\fi
}
@@ -6818,31 +5802,33 @@
% {. If so it reads up to the closing }, if not, it reads the whole
% line. Whatever was read is then fed to the next control sequence
% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup\else
\expandafter\parsearg
- \fi \macnamexxx}
+ \fi \next}
+
+% We mant to disable all macros during \shipout so that they are not
+% expanded by \write.
+\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
+ \edef\next{\macrolist}\expandafter\endgroup\next}
% @alias.
% We need some trickery to remove the optional spaces around the equal
% sign. Just make them active and then expand them all to nothing.
-\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{%
- {%
- \expandafter\let\obeyedspace=\empty
- \addtomacrolist{#1}%
- \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
- }%
- \next
-}
+\def\aliasyyy #1=#2\relax{\ignoreactivespaces
+\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
+ \expandafter\noexpand\csname#2\endcsname}%
+\expandafter\endgroup\next}
\message{cross references,}
\newwrite\auxfile
+
\newif\ifhavexrefs % True if xref values are known.
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
@@ -6852,27 +5838,19 @@
node \samp{\ignorespaces#1{}}}
% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references. The @node line might or might not have commas, and
-% might or might not have spaces before the first comma, like:
-% @node foo , bar , ...
-% We don't want such trailing spaces in the node name.
-%
-\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
-%
-% also remove a trailing comma, in case of something like this:
-% @node Help-Cross, , , Cross-refs
-\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
-\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
-
+% cross-references.
+\def\node{\ENVcheck\parsearg\nodezzz}
+\def\nodezzz#1{\nodexxx #1,\finishnodeparse}
+\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
\let\nwnode=\node
\let\lastnode=\empty
% Write a cross-reference definition for the current node. #1 is the
% type (Ynumbered, Yappendix, Ynothing).
-%
+%
\def\donoderef#1{%
\ifx\lastnode\empty\else
- \setref{\lastnode}{#1}%
+ \expandafter\expandafter\expandafter\setref{\lastnode}{#1}%
\global\let\lastnode=\empty
\fi
}
@@ -6881,38 +5859,33 @@
%
\newcount\savesfregister
%
-\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \lastsection,
-% or the anchor name.
-% 2) NAME-snt - section number and type, passed as the SNT arg, or
-% empty for anchors.
-% 3) NAME-pg - the page number.
-%
-% This is called from \donoderef, \anchor, and \dofloat. In the case of
-% floats, there is an additional part, which is not written here:
-% 4) NAME-lof - the text as it should appear in a @listoffloats.
+% anchor), namely NAME-title (the corresponding @chapter/etc. name),
+% NAME-pg (the page number), and NAME-snt (section number and type).
+% Called from \foonoderef.
+%
+% We have to set dummies so commands such as @code in a section title
+% aren't expanded. It would be nicer not to expand the titles in the
+% first place, but that is hard to do.
+%
+% Likewise, use \turnoffactive so that punctuation chars such as underscore
+% and backslash work in node names.
%
-\def\setref#1#2{%
+\def\setref#1#2{{%
+ \atdummies
\pdfmkdest{#1}%
+ %
\iflinks
- {%
- \atdummies % preserve commands, but don't expand them
- \edef\writexrdef##1##2{%
- \write\auxfile{ xrdef{#1-% #1 of \setref, expanded by the \edef
- ##1}{##2}}% these are parameters of \writexrdef
- }%
- \toks0 = \expandafter{\lastsection}%
- \immediate \writexrdef{title}{\the\toks0 }%
- \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
- \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout
- }%
+ \turnoffactive
+ \dosetq{#1-title}{Ytitle}%
+ \dosetq{#1-pg}{Ypagenumber}%
+ \dosetq{#1-snt}{#2}%
\fi
-}
+}}
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
@@ -6925,123 +5898,101 @@
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
\unsepspaces
\def\printedmanual{\ignorespaces #5}%
- \def\printedrefname{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual\unskip}%
- \setbox0=\hbox{\printedrefname\unskip}%
+ \def\printednodename{\ignorespaces #3}%
+ \setbox1=\hbox{\printedmanual}%
+ \setbox0=\hbox{\printednodename}%
\ifdim \wd0 = 0pt
% No printed node name was explicitly given.
\expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
% Use the node name inside the square brackets.
- \def\printedrefname{\ignorespaces #1}%
+ \def\printednodename{\ignorespaces #1}%
\else
% Use the actual chapter/section title appear inside
% the square brackets. Use the real section title if we have it.
\ifdim \wd1 > 0pt
% It is in another manual, so we don't have it.
- \def\printedrefname{\ignorespaces #1}%
+ \def\printednodename{\ignorespaces #1}%
\else
\ifhavexrefs
% We know the real title if we have the xref values.
- \def\printedrefname{\refx{#1-title}{}}%
+ \def\printednodename{\refx{#1-title}{}}%
\else
% Otherwise just copy the Info node name.
- \def\printedrefname{\ignorespaces #1}%
+ \def\printednodename{\ignorespaces #1}%
\fi%
\fi
\fi
\fi
%
- % Make link in pdf output.
+ % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+ % insert empty discretionaries after hyphens, which means that it will
+ % not find a line break at a hyphen in a node names. Since some manuals
+ % are best written with fairly long node names, containing hyphens, this
+ % is a loss. Therefore, we give the text of the node name again, so it
+ % is as if TeX is seeing it for the first time.
\ifpdf
\leavevmode
\getfilename{#4}%
- {\indexnofonts
- \turnoffactive
- % See comments at \activebackslashdouble.
- {\activebackslashdouble \xdef\pdfxrefdest{#1}%
- \backslashparens\pdfxrefdest}%
- %
+ {\turnoffactive \otherbackslash
\ifnum\filenamelength>0
\startlink attr{/Border [0 0 0]}%
- goto file{\the\filename.pdf} name{\pdfxrefdest}%
+ goto file{\the\filename.pdf} name{#1}%
\else
\startlink attr{/Border [0 0 0]}%
- goto name{\pdfmkpgn{\pdfxrefdest}}%
+ goto name{\pdfmkpgn{#1}}%
\fi
}%
- \setcolor{\linkcolor}%
+ \linkcolor
\fi
%
- % Float references are printed completely differently: "Figure 1.2"
- % instead of "[somenode], p.3". We distinguish them by the
- % LABEL-title being set to a magic string.
- {%
- % Have to otherify everything special to allow the \csname to
- % include an _ in the xref name, etc.
- \indexnofonts
- \turnoffactive
- \expandafter\global\expandafter\let\expandafter\Xthisreftitle
- \csname XR#1-title\endcsname
- }%
- \iffloat\Xthisreftitle
- % If the user specified the print name (third arg) to the ref,
- % print it instead of our usual "Figure 1.2".
- \ifdim\wd0 = 0pt
- \refx{#1-snt}{}%
- \else
- \printedrefname
- \fi
- %
- % if the user also gave the printed manual name (fifth arg), append
- % "in MANUALNAME".
- \ifdim \wd1 > 0pt
- \space \putwordin{} \cite{\printedmanual}%
- \fi
+ \ifdim \wd1 > 0pt
+ \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
\else
- % node/anchor (non-float) references.
+ % _ (for example) has to be the character _ for the purposes of the
+ % control sequence corresponding to the node, but it has to expand
+ % into the usual \leavevmode...\vrule stuff for purposes of
+ % printing. So we \turnoffactive for the \refx-snt, back on for the
+ % printing, back off for the \refx-pg.
+ {\turnoffactive \otherbackslash
+ % Only output a following space if the -snt ref is nonempty; for
+ % @unnumbered and @anchor, it won't be.
+ \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+ \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+ }%
+ % output the `[mynode]' via a macro.
+ \xrefprintnodename\printednodename
%
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifdim \wd1 > 0pt
- \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
- \else
- % _ (for example) has to be the character _ for the purposes of the
- % control sequence corresponding to the node, but it has to expand
- % into the usual \leavevmode...\vrule stuff for purposes of
- % printing. So we \turnoffactive for the \refx-snt, back on for the
- % printing, back off for the \refx-pg.
- {\turnoffactive
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
- \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
- }%
- % output the `[mynode]' via a macro so it can be overridden.
- \xrefprintnodename\printedrefname
- %
- % But we always want a comma and a space:
- ,\space
- %
- % output the `page 3'.
- \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
- \fi
+ % But we always want a comma and a space:
+ ,\space
+ %
+ % output the `page 3'.
+ \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
\fi
\endlink
\endgroup}
% This macro is called from \xrefX for the `[nodename]' part of xref
% output. It's a separate macro only so it can be changed more easily,
-% since square brackets don't work well in some documents. Particularly
+% since not square brackets don't work in some documents. Particularly
% one that Bob is working on :).
%
\def\xrefprintnodename#1{[#1]}
-% Things referred to by \setref.
+% \dosetq is called from \setref to do the actual \write (\iflinks).
+%
+\def\dosetq#1#2{%
+ \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
+ \next
+}
+
+% \internalsetq{foo}{page} expands into
+% CHARACTERS @xrdef{foo}{...expansion of \page...}
+\def\internalsetq#1#2{ xrdef{#1}{\csname #2\endcsname}}
+
+% Things to be expanded by \internalsetq.
%
+\def\Ypagenumber{\noexpand\folio}
+\def\Ytitle{\thissection}
\def\Ynothing{}
\def\Yomitfromtoc{}
\def\Ynumbered{%
@@ -7068,6 +6019,15 @@
\fi\fi\fi
}
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+ \let\linenumber = \empty % Pre-3.0.
+\else
+ \def\linenumber{\the\inputlineno:\space}
+\fi
+
% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
% If its value is nonempty, SUFFIX is output afterward.
%
@@ -7076,7 +6036,7 @@
\indexnofonts
\otherbackslash
\expandafter\global\expandafter\let\expandafter\thisrefX
- \csname XR#1\endcsname
+ \csname X#1\endcsname
}%
\ifx\thisrefX\relax
% If not defined, say something at least.
@@ -7098,54 +6058,12 @@
#2% Output the suffix in any case.
}
-% This is the macro invoked by entries in the aux file. Usually it's
-% just a \def (we prepend XR to the control sequence name to avoid
-% collisions). But if this is a float type, we have more work to do.
-%
-\def\xrdef#1#2{%
- {% The node name might contain 8-bit characters, which in our current
- % implementation are changed to commands like @'e. Don't let these
- % mess up the control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safexrefname{#1}%
- }%
- %
- \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
- %
- % Was that xref control sequence that we just defined for a float?
- \expandafter\iffloat\csname XR\safexrefname\endcsname
- % it was a float, and we have the (safe) float type in \iffloattype.
- \expandafter\let\expandafter\floatlist
- \csname floatlist\iffloattype\endcsname
- %
- % Is this the first time we've seen this float type?
- \expandafter\ifx\floatlist\relax
- \toks0 = {\do}% yes, so just \do
- \else
- % had it before, so preserve previous elements in list.
- \toks0 = \expandafter{\floatlist\do}%
- \fi
- %
- % Remember this xref in the control sequence \floatlistFLOATTYPE,
- % for later use in \listoffloats.
- \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
- {\safexrefname}}%
- \fi
-}
-
-% Read the last existing aux file, if any. No error if none exists.
+% This is the macro invoked by entries in the aux file.
%
-\def\tryauxfile{%
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \readdatafile{aux}%
- \global\havexrefstrue
- \fi
- \closein 1
-}
+\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
-\def\setupdatafile{%
+% Read the last existing aux file, if any. No error if none exists.
+\def\readauxfile{\begingroup
\catcode`\^^ =\other
\catcode`\^^A=\other
\catcode`\^^B=\other
@@ -7203,40 +6121,40 @@
\catcode`\%=\other
\catcode`+=\other % avoid \+ for paranoia even though we've turned it off
%
- % This is to support \ in node names and titles, since the \
- % characters end up in a \csname. It's easier than
- % leaving it active and making its active definition an actual \
- % character. What I don't understand is why it works in the *value*
- % of the xrdef. Seems like it should be a catcode12 \, and that
- % should not typeset properly. But it works, so I'm moving on for
- % now. --karl, 15jan04.
- \catcode`\\=\other
- %
- % Make the characters 128-255 be printing characters.
+ % Make the characters 128-255 be printing characters
{%
- \count1=128
+ \count 1=128
\def\loop{%
- \catcode\count1=\other
- \advance\count1 by 1
- \ifnum \count1<256 \loop \fi
+ \catcode\count 1=\other
+ \advance\count 1 by 1
+ \ifnum \count 1<256 \loop \fi
}%
}%
%
- % @ is our escape character in .aux files, and we need braces.
+ % Turn off \ as an escape so we do not lose on
+ % entries which were dumped with control sequences in their names.
+ % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^
+ % Reference to such entries still does not work the way one would wish,
+ % but at least they do not bomb out when the aux file is read in.
+ \catcode`\\=\other
+ %
+ % @ is our escape character in .aux files.
\catcode`\{=1
\catcode`\}=2
\catcode`\ =0
-}
-
-\def\readdatafile#1{%
-\begingroup
- \setupdatafile
- \input\jobname.#1
+ %
+ \openin 1 \jobname.aux
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.aux
+ \global\havexrefstrue
+ \fi
+ % Open the new aux file. TeX will close it automatically at exit.
+ \openout\auxfile=\jobname.aux
\endgroup}
-\message{insertions,}
-% including footnotes.
+% Footnotes.
\newcount \footnoteno
@@ -7250,6 +6168,8 @@
% @footnotestyle is meaningful for info output only.
\let\footnotestyle=\comment
+\let\ptexfootnote=\footnote
+
{\catcode `\ =11
%
% Auto-number footnotes. Otherwise like plain.
@@ -7273,12 +6193,17 @@
% Don't bother with the trickery in plain.tex to not require the
% footnote text as a parameter. Our footnotes don't need to be so general.
%
-% Oh yes, they do; otherwise, @ifset (and anything else that uses
-% \parseargline) fails inside footnotes because the tokens are fixed when
+% Oh yes, they do; otherwise, @ifset and anything else that uses
+% \parseargline fail inside footnotes because the tokens are fixed when
% the footnote is read. --karl, 16nov96.
%
+% The start of the footnote looks usually like this:
+\gdef\startfootins{\insert\footins\bgroup}
+%
+% ... but this macro is redefined inside @multitable.
+%
\gdef\dofootnote{%
- \insert\footins\bgroup
+ \startfootins
% We want to typeset this text as a normal paragraph, even if the
% footnote reference occurs in (for example) a display environment.
% So reset some parameters.
@@ -7314,66 +6239,40 @@
}
}%end \catcode `\ =11
-% In case a @footnote appears in a vbox, save the footnote text and create
-% the real \insert just after the vbox finished. Otherwise, the insertion
-% would be lost.
-% Similarily, if a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is finished.
-% And the same can be done for other insert classes. --kasal, 16nov03.
-
-% Replace the \insert primitive by a cheating macro.
-% Deeper inside, just make sure that the saved insertions are not spilled
-% out prematurely.
-%
-\def\startsavinginserts{%
- \ifx \insert\ptexinsert
- \let\insert\saveinsert
- \else
- \let\checkinserts\relax
- \fi
-}
-
-% This \insert replacement works for both \insert\footins{foo} and
-% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+% @| inserts a changebar to the left of the current line. It should
+% surround any changed text. This approach does *not* work if the
+% change spans more than two lines of output. To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).
%
-\def\saveinsert#1{%
- \edef\next{\noexpand\savetobox \makeSAVEname#1}%
- \afterassignment\next
- % swallow the left brace
- \let\temp =
-}
-\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
-\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
-
-\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
-
-\def\placesaveins#1{%
- \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
- {\box#1}%
-}
-
-% eat @SAVE -- beware, all of them have catcode \other:
-{
- \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-)
- \gdef\gobblesave @SAVE{}
-}
-
-% initialization:
-\def\newsaveins #1{%
- \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
- \next
-}
-\def\newsaveinsX #1{%
- \csname newbox\endcsname #1%
- \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
- \checksaveins #1}%
+\def\|{%
+ % \vadjust can only be used in horizontal mode.
+ \leavevmode
+ %
+ % Append this vertical mode material after the current line in the output.
+ \vadjust{%
+ % We want to insert a rule with the height and depth of the current
+ % leading; that is exactly what \strutbox is supposed to record.
+ \vskip-\baselineskip
+ %
+ % \vadjust-items are inserted at the left edge of the type. So
+ % the \llap here moves out into the left-hand margin.
+ \llap{%
+ %
+ % For a thicker or thinner bar, change the `1pt'.
+ \vrule height\baselineskip width1pt
+ %
+ % This is the space between the bar and the text.
+ \hskip 12pt
+ }%
+ }%
}
-% initialize:
-\let\checkinserts\empty
-\newsaveins\footins
-\newsaveins\margin
-
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt}
% @image. We use the macros from epsf.tex to support this.
% If epsf.tex is not installed and @image is used, we complain.
@@ -7383,12 +6282,12 @@
% undone and the next image would fail.
\openin 1 = epsf.tex
\ifeof 1 \else
+ \closein 1
% Do not bother showing banner with epsf.tex v2.7k (available in
% doc/epsf.tex and on ctan).
\def\epsfannounce{\toks0 = }%
\input epsf.tex
\fi
-\closein 1
%
% We will only complain once about lack of epsf.tex.
\newif\ifwarnednoepsf
@@ -7427,7 +6326,7 @@
% above and below.
\nobreak\vskip\parskip
\nobreak
- \line\bgroup
+ \line\bgroup\hss
\fi
%
% Output the image.
@@ -7440,1140 +6339,45 @@
\epsfbox{#1.eps}%
\fi
%
- \ifimagevmode \egroup \bigbreak \fi % space after the image
+ \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
\endgroup}
-% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
-% etc. We don't actually implement floating yet, we always include the
-% float "here". But it seemed the best name for the future.
-%
-\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
-
-% There may be a space before second and/or third parameter; delete it.
-\def\eatcommaspace#1, {#1,}
-
-% #1 is the optional FLOATTYPE, the text label for this float, typically
-% "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
-% this float will not be numbered and cannot be referred to.
-%
-% #2 is the optional xref label. Also must be present for the float to
-% be referable.
-%
-% #3 is the optional positioning argument; for now, it is ignored. It
-% will somehow specify the positions allowed to float to (here, top, bottom).
-%
-% We keep a separate counter for each FLOATTYPE, which we reset at each
-% chapter-level command.
-\let\resetallfloatnos=\empty
-%
-\def\dofloat#1,#2,#3,#4\finish{%
- \let\thiscaption=\empty
- \let\thisshortcaption=\empty
- %
- % don't lose footnotes inside @float.
- %
- % BEWARE: when the floats start float, we have to issue warning whenever an
- % insert appears inside a float which could possibly float. --kasal, 26may04
- %
- \startsavinginserts
- %
- % We can't be used inside a paragraph.
- \par
- %
- \vtop\bgroup
- \def\floattype{#1}%
- \def\floatlabel{#2}%
- \def\floatloc{#3}% we do nothing with this yet.
- %
- \ifx\floattype\empty
- \let\safefloattype=\empty
- \else
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- \fi
- %
- % If label is given but no type, we handle that as the empty type.
- \ifx\floatlabel\empty \else
- % We want each FLOATTYPE to be numbered separately (Figure 1,
- % Table 1, Figure 2, ...). (And if no label, no number.)
- %
- \expandafter\getfloatno\csname\safefloattype floatno\endcsname
- \global\advance\floatno by 1
- %
- {%
- % This magic value for \lastsection is output by \setref as the
- % XREFLABEL-title value. \xrefX uses it to distinguish float
- % labels (which have a completely different output format) from
- % node and anchor labels. And \xrdef uses it to construct the
- % lists of floats.
- %
- \edef\lastsection{\floatmagic=\safefloattype}%
- \setref{\floatlabel}{Yfloat}%
- }%
- \fi
- %
- % start with \parskip glue, I guess.
- \vskip\parskip
- %
- % Don't suppress indentation if a float happens to start a section.
- \restorefirstparagraphindent
-}
-
-% we have these possibilities:
-% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
-% @float Foo,lbl & no caption: Foo 1.1
-% @float Foo & @caption{Cap}: Foo: Cap
-% @float Foo & no caption: Foo
-% @float ,lbl & Caption{Cap}: 1.1: Cap
-% @float ,lbl & no caption: 1.1
-% @float & @caption{Cap}: Cap
-% @float & no caption:
-%
-\def\Efloat{%
- \let\floatident = \empty
- %
- % In all cases, if we have a float type, it comes first.
- \ifx\floattype\empty \else \def\floatident{\floattype}\fi
- %
- % If we have an xref label, the number comes next.
- \ifx\floatlabel\empty \else
- \ifx\floattype\empty \else % if also had float type, need tie first.
- \appendtomacro\floatident{\tie}%
- \fi
- % the number.
- \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
- \fi
- %
- % Start the printed caption with what we've constructed in
- % \floatident, but keep it separate; we need \floatident again.
- \let\captionline = \floatident
- %
- \ifx\thiscaption\empty \else
- \ifx\floatident\empty \else
- \appendtomacro\captionline{: }% had ident, so need a colon between
- \fi
- %
- % caption text.
- \appendtomacro\captionline{\scanexp\thiscaption}%
- \fi
- %
- % If we have anything to print, print it, with space before.
- % Eventually this needs to become an \insert.
- \ifx\captionline\empty \else
- \vskip.5\parskip
- \captionline
- %
- % Space below caption.
- \vskip\parskip
- \fi
- %
- % If have an xref label, write the list of floats info. Do this
- % after the caption, to avoid chance of it being a breakpoint.
- \ifx\floatlabel\empty \else
- % Write the text that goes in the lof to the aux file as
- % \floatlabel-lof. Besides \floatident, we include the short
- % caption if specified, else the full caption if specified, else nothing.
- {%
- \atdummies
- %
- % since we read the caption text in the macro world, where ^^M
- % is turned into a normal character, we have to scan it back, so
- % we don't write the literal three characters "^^M" into the aux file.
- \scanexp{%
- \xdef\noexpand\gtemp{%
- \ifx\thisshortcaption\empty
- \thiscaption
- \else
- \thisshortcaption
- \fi
- }%
- }%
- \immediate\write\auxfile{ xrdef{\floatlabel-lof}{\floatident
- \ifx\gtemp\empty \else : \gtemp \fi}}%
- }%
- \fi
- \egroup % end of \vtop
- %
- % place the captured inserts
- %
- % BEWARE: when the floats start floating, we have to issue warning
- % whenever an insert appears inside a float which could possibly
- % float. --kasal, 26may04
- %
- \checkinserts
-}
-
-% Append the tokens #2 to the definition of macro #1, not expanding either.
-%
-\def\appendtomacro#1#2{%
- \expandafter\def\expandafter#1\expandafter{#1#2}%
-}
-
-% @caption, @shortcaption
-%
-\def\caption{\docaption\thiscaption}
-\def\shortcaption{\docaption\thisshortcaption}
-\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
-\def\defcaption#1#2{\egroup \def#1{#2}}
-
-% The parameter is the control sequence identifying the counter we are
-% going to use. Create it if it doesn't exist and assign it to \floatno.
-\def\getfloatno#1{%
- \ifx#1\relax
- % Haven't seen this figure type before.
- \csname newcount\endcsname #1%
- %
- % Remember to reset this floatno at the next chap.
- \expandafter\gdef\expandafter\resetallfloatnos
- \expandafter{\resetallfloatnos #1=0 }%
- \fi
- \let\floatno#1%
-}
-
-% \setref calls this to get the XREFLABEL-snt value. We want an @xref
-% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
-% first read the @float command.
-%
-\def\Yfloat{\floattype tie \chaplevelprefix\the\floatno}%
-
-% Magic string used for the XREFLABEL-title value, so \xrefX can
-% distinguish floats from other xref types.
-\def\floatmagic{!!float!!}
-
-% #1 is the control sequence we are passed; we expand into a conditional
-% which is true if #1 represents a float ref. That is, the magic
-% \lastsection value which we \setref above.
-%
-\def\iffloat#1{\expandafter\doiffloat#1==\finish}
-%
-% #1 is (maybe) the \floatmagic string. If so, #2 will be the
-% (safe) float type for this float. We set \iffloattype to #2.
-%
-\def\doiffloat#1=#2=#3\finish{%
- \def\temp{#1}%
- \def\iffloattype{#2}%
- \ifx\temp\floatmagic
-}
-
-% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-%
-\parseargdef\listoffloats{%
- \def\floattype{#1}% floattype
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- %
- % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
- \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
- \ifhavexrefs
- % if the user said @listoffloats foo but never @float foo.
- \message{\linenumber No `\safefloattype' floats to list.}%
- \fi
- \else
- \begingroup
- \leftskip=\tocindent % indent these entries like a toc
- \let\do=\listoffloatsdo
- \csname floatlist\safefloattype\endcsname
- \endgroup
- \fi
-}
-
-% This is called on each entry in a list of floats. We're passed the
-% xref label, in the form LABEL-title, which is how we save it in the
-% aux file. We strip off the -title and look up \XRLABEL-lof, which
-% has the text we're supposed to typeset here.
-%
-% Figures without xref labels will not be included in the list (since
-% they won't appear in the aux file).
-%
-\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
-\def\listoffloatsdoentry#1-title\finish{{%
- % Can't fully expand XR#1-lof because it can contain anything. Just
- % pass the control sequence. On the other hand, XR#1-pg is just the
- % page number, and we want to fully expand that so we can get a link
- % in pdf output.
- \toksA = \expandafter{\csname XR#1-lof\endcsname}%
- %
- % use the same \entry macro we use to generate the TOC and index.
- \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
- \writeentry
-}}
-
-
\message{localization,}
+% and i18n.
% @documentlanguage is usually given very early, just after
% @setfilename. If done too late, it may not override everything
-% properly. Single argument is the language (de) or locale (de_DE)
-% abbreviation. It would be nice if we could set up a hyphenation file.
+% properly. Single argument is the language abbreviation.
+% It would be nice if we could set up a hyphenation file here.
%
-{
- \catcode`\_ = \active
- \globaldefs=1
-\parseargdef\documentlanguage{\begingroup
- \let_=\normalunderscore % normal _ character for filenames
+\def\documentlanguage{\parsearg\dodocumentlanguage}
+\def\dodocumentlanguage#1{%
\tex % read txi-??.tex file in plain TeX.
- % Read the file by the name they passed if it exists.
- \openin 1 txi-#1.tex
- \ifeof 1
- \documentlanguagetrywithoutunderscore{#1_\finish}%
- \else
- \input txi-#1.tex
- \fi
- \closein 1
- \endgroup
-\endgroup}
-}
-%
-% If they passed de_DE, and txi-de_DE.tex doesn't exist,
-% try txi-de.tex.
-%
-\def\documentlanguagetrywithoutunderscore#1_#2\finish{%
+ % Read the file if it exists.
\openin 1 txi-#1.tex
- \ifeof 1
+ \ifeof1
\errhelp = \nolanghelp
\errmessage{Cannot read language file txi-#1.tex}%
+ \let\temp = \relax
\else
- \input txi-#1.tex
+ \def\temp{\input txi-#1.tex }%
\fi
- \closein 1
+ \temp
+ \endgroup
}
-%
\newhelp\nolanghelp{The given language definition file cannot be found or
is empty. Maybe you need to install it? In the current directory
should work if nowhere else does.}
-% Set the catcode of characters 128 through 255 to the specified number.
-%
-\def\setnonasciicharscatcode#1{%
- \count255=128
- \loop\ifnum\count255<256
- \global\catcode\count255=#1\relax
- \advance\count255 by 1
- \repeat
-}
-
-\def\setnonasciicharscatcodenonglobal#1{%
- \count255=128
- \loop\ifnum\count255<256
- \catcode\count255=#1\relax
- \advance\count255 by 1
- \repeat
-}
-
-% @documentencoding sets the definition of non-ASCII characters
-% according to the specified encoding.
-%
-\parseargdef\documentencoding{%
- % Encoding being declared for the document.
- \def\declaredencoding{\csname #1.enc\endcsname}%
- %
- % Supported encodings: names converted to tokens in order to be able
- % to compare them with \ifx.
- \def\ascii{\csname US-ASCII.enc\endcsname}%
- \def\latnine{\csname ISO-8859-15.enc\endcsname}%
- \def\latone{\csname ISO-8859-1.enc\endcsname}%
- \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
- \def\utfeight{\csname UTF-8.enc\endcsname}%
- %
- \ifx \declaredencoding \ascii
- \asciichardefs
- %
- \else \ifx \declaredencoding \lattwo
- \setnonasciicharscatcode\active
- \lattwochardefs
- %
- \else \ifx \declaredencoding \latone
- \setnonasciicharscatcode\active
- \latonechardefs
- %
- \else \ifx \declaredencoding \latnine
- \setnonasciicharscatcode\active
- \latninechardefs
- %
- \else \ifx \declaredencoding \utfeight
- \setnonasciicharscatcode\active
- \utfeightchardefs
- %
- \else
- \message{Unknown document encoding #1, ignoring.}%
- %
- \fi % utfeight
- \fi % latnine
- \fi % latone
- \fi % lattwo
- \fi % ascii
-}
-
-% A message to be logged when using a character that isn't available
-% the default font encoding (OT1).
-%
-\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
-
-% Take account of \c (plain) vs. \, (Texinfo) difference.
-\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
-
-% First, make active non-ASCII characters in order for them to be
-% correctly categorized when TeX reads the replacement text of
-% macros containing the character definitions.
-\setnonasciicharscatcode\active
-%
-% Latin1 (ISO-8859-1) character definitions.
-\def\latonechardefs{%
- \gdef^^a0{~}
- \gdef^^a1{\exclamdown}
- \gdef^^a2{\missingcharmsg{CENT SIGN}}
- \gdef^^a3{{\pounds}}
- \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
- \gdef^^a5{\missingcharmsg{YEN SIGN}}
- \gdef^^a6{\missingcharmsg{BROKEN BAR}}
- \gdef^^a7{\S}
- \gdef^^a8{\"{}}
- \gdef^^a9{\copyright}
- \gdef^^aa{\ordf}
- \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}}
- \gdef^^ac{$\lnot$}
- \gdef^^ad{\-}
- \gdef^^ae{\registeredsymbol}
- \gdef^^af{\={}}
- %
- \gdef^^b0{\textdegree}
- \gdef^^b1{$\pm$}
- \gdef^^b2{$^2$}
- \gdef^^b3{$^3$}
- \gdef^^b4{\'{}}
- \gdef^^b5{$\mu$}
- \gdef^^b6{\P}
- %
- \gdef^^b7{$^.$}
- \gdef^^b8{\cedilla\ }
- \gdef^^b9{$^1$}
- \gdef^^ba{\ordm}
- %
- \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}}
- \gdef^^bc{$1\over4$}
- \gdef^^bd{$1\over2$}
- \gdef^^be{$3\over4$}
- \gdef^^bf{\questiondown}
- %
- \gdef^^c0{\`A}
- \gdef^^c1{\'A}
- \gdef^^c2{\^A}
- \gdef^^c3{\~A}
- \gdef^^c4{\"A}
- \gdef^^c5{\ringaccent A}
- \gdef^^c6{\AE}
- \gdef^^c7{\cedilla C}
- \gdef^^c8{\`E}
- \gdef^^c9{\'E}
- \gdef^^ca{\^E}
- \gdef^^cb{\"E}
- \gdef^^cc{\`I}
- \gdef^^cd{\'I}
- \gdef^^ce{\^I}
- \gdef^^cf{\"I}
- %
- \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER ETH}}
- \gdef^^d1{\~N}
- \gdef^^d2{\`O}
- \gdef^^d3{\'O}
- \gdef^^d4{\^O}
- \gdef^^d5{\~O}
- \gdef^^d6{\"O}
- \gdef^^d7{$\times$}
- \gdef^^d8{\O}
- \gdef^^d9{\`U}
- \gdef^^da{\'U}
- \gdef^^db{\^U}
- \gdef^^dc{\"U}
- \gdef^^dd{\'Y}
- \gdef^^de{\missingcharmsg{LATIN CAPITAL LETTER THORN}}
- \gdef^^df{\ss}
- %
- \gdef^^e0{\`a}
- \gdef^^e1{\'a}
- \gdef^^e2{\^a}
- \gdef^^e3{\~a}
- \gdef^^e4{\"a}
- \gdef^^e5{\ringaccent a}
- \gdef^^e6{\ae}
- \gdef^^e7{\cedilla c}
- \gdef^^e8{\`e}
- \gdef^^e9{\'e}
- \gdef^^ea{\^e}
- \gdef^^eb{\"e}
- \gdef^^ec{\`{\dotless i}}
- \gdef^^ed{\'{\dotless i}}
- \gdef^^ee{\^{\dotless i}}
- \gdef^^ef{\"{\dotless i}}
- %
- \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER ETH}}
- \gdef^^f1{\~n}
- \gdef^^f2{\`o}
- \gdef^^f3{\'o}
- \gdef^^f4{\^o}
- \gdef^^f5{\~o}
- \gdef^^f6{\"o}
- \gdef^^f7{$\div$}
- \gdef^^f8{\o}
- \gdef^^f9{\`u}
- \gdef^^fa{\'u}
- \gdef^^fb{\^u}
- \gdef^^fc{\"u}
- \gdef^^fd{\'y}
- \gdef^^fe{\missingcharmsg{LATIN SMALL LETTER THORN}}
- \gdef^^ff{\"y}
-}
-
-% Latin9 (ISO-8859-15) encoding character definitions.
-\def\latninechardefs{%
- % Encoding is almost identical to Latin1.
- \latonechardefs
- %
- \gdef^^a4{\euro}
- \gdef^^a6{\v S}
- \gdef^^a8{\v s}
- \gdef^^b4{\v Z}
- \gdef^^b8{\v z}
- \gdef^^bc{\OE}
- \gdef^^bd{\oe}
- \gdef^^be{\"Y}
-}
-
-% Latin2 (ISO-8859-2) character definitions.
-\def\lattwochardefs{%
- \gdef^^a0{~}
- \gdef^^a1{\missingcharmsg{LATIN CAPITAL LETTER A WITH OGONEK}}
- \gdef^^a2{\u{}}
- \gdef^^a3{\L}
- \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
- \gdef^^a5{\v L}
- \gdef^^a6{\'S}
- \gdef^^a7{\S}
- \gdef^^a8{\"{}}
- \gdef^^a9{\v S}
- \gdef^^aa{\cedilla S}
- \gdef^^ab{\v T}
- \gdef^^ac{\'Z}
- \gdef^^ad{\-}
- \gdef^^ae{\v Z}
- \gdef^^af{\dotaccent Z}
- %
- \gdef^^b0{\textdegree}
- \gdef^^b1{\missingcharmsg{LATIN SMALL LETTER A WITH OGONEK}}
- \gdef^^b2{\missingcharmsg{OGONEK}}
- \gdef^^b3{\l}
- \gdef^^b4{\'{}}
- \gdef^^b5{\v l}
- \gdef^^b6{\'s}
- \gdef^^b7{\v{}}
- \gdef^^b8{\cedilla\ }
- \gdef^^b9{\v s}
- \gdef^^ba{\cedilla s}
- \gdef^^bb{\v t}
- \gdef^^bc{\'z}
- \gdef^^bd{\H{}}
- \gdef^^be{\v z}
- \gdef^^bf{\dotaccent z}
- %
- \gdef^^c0{\'R}
- \gdef^^c1{\'A}
- \gdef^^c2{\^A}
- \gdef^^c3{\u A}
- \gdef^^c4{\"A}
- \gdef^^c5{\'L}
- \gdef^^c6{\'C}
- \gdef^^c7{\cedilla C}
- \gdef^^c8{\v C}
- \gdef^^c9{\'E}
- \gdef^^ca{\missingcharmsg{LATIN CAPITAL LETTER E WITH OGONEK}}
- \gdef^^cb{\"E}
- \gdef^^cc{\v E}
- \gdef^^cd{\'I}
- \gdef^^ce{\^I}
- \gdef^^cf{\v D}
- %
- \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER D WITH STROKE}}
- \gdef^^d1{\'N}
- \gdef^^d2{\v N}
- \gdef^^d3{\'O}
- \gdef^^d4{\^O}
- \gdef^^d5{\H O}
- \gdef^^d6{\"O}
- \gdef^^d7{$\times$}
- \gdef^^d8{\v R}
- \gdef^^d9{\ringaccent U}
- \gdef^^da{\'U}
- \gdef^^db{\H U}
- \gdef^^dc{\"U}
- \gdef^^dd{\'Y}
- \gdef^^de{\cedilla T}
- \gdef^^df{\ss}
- %
- \gdef^^e0{\'r}
- \gdef^^e1{\'a}
- \gdef^^e2{\^a}
- \gdef^^e3{\u a}
- \gdef^^e4{\"a}
- \gdef^^e5{\'l}
- \gdef^^e6{\'c}
- \gdef^^e7{\cedilla c}
- \gdef^^e8{\v c}
- \gdef^^e9{\'e}
- \gdef^^ea{\missingcharmsg{LATIN SMALL LETTER E WITH OGONEK}}
- \gdef^^eb{\"e}
- \gdef^^ec{\v e}
- \gdef^^ed{\'\i}
- \gdef^^ee{\^\i}
- \gdef^^ef{\v d}
- %
- \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER D WITH STROKE}}
- \gdef^^f1{\'n}
- \gdef^^f2{\v n}
- \gdef^^f3{\'o}
- \gdef^^f4{\^o}
- \gdef^^f5{\H o}
- \gdef^^f6{\"o}
- \gdef^^f7{$\div$}
- \gdef^^f8{\v r}
- \gdef^^f9{\ringaccent u}
- \gdef^^fa{\'u}
- \gdef^^fb{\H u}
- \gdef^^fc{\"u}
- \gdef^^fd{\'y}
- \gdef^^fe{\cedilla t}
- \gdef^^ff{\dotaccent{}}
-}
-
-% UTF-8 character definitions.
-%
-% This code to support UTF-8 is based on LaTeX's utf8.def, with some
-% changes for Texinfo conventions. It is included here under the GPL by
-% permission from Frank Mittelbach and the LaTeX team.
-%
-\newcount\countUTFx
-\newcount\countUTFy
-\newcount\countUTFz
-
-\gdef\UTFviiiTwoOctets#1#2{\expandafter
- \UTFviiiDefined\csname u8:#1\string #2\endcsname}
-%
-\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
- \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
-%
-\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
- \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
-
-\gdef\UTFviiiDefined#1{%
- \ifx #1\relax
- \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
- \else
- \expandafter #1%
- \fi
-}
-
-\begingroup
- \catcode`\~13
- \catcode`\"12
-
- \def\UTFviiiLoop{%
- \global\catcode\countUTFx\active
- \uccode`\~\countUTFx
- \uppercase\expandafter{\UTFviiiTmp}%
- \advance\countUTFx by 1
- \ifnum\countUTFx < \countUTFy
- \expandafter\UTFviiiLoop
- \fi}
-
- \countUTFx = "C2
- \countUTFy = "E0
- \def\UTFviiiTmp{%
- \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
- \UTFviiiLoop
-
- \countUTFx = "E0
- \countUTFy = "F0
- \def\UTFviiiTmp{%
- \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
- \UTFviiiLoop
-
- \countUTFx = "F0
- \countUTFy = "F4
- \def\UTFviiiTmp{%
- \xdef~{\noexpand\UTFviiiFourOctets\string~}}
- \UTFviiiLoop
-\endgroup
-
-\begingroup
- \catcode`\"=12
- \catcode`\<=12
- \catcode`\.=12
- \catcode`\,=12
- \catcode`\;=12
- \catcode`\!=12
- \catcode`\~=13
-
- \gdef\DeclareUnicodeCharacter#1#2{%
- \countUTFz = "#1\relax
- \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
- \begingroup
- \parseXMLCharref
- \def\UTFviiiTwoOctets##1##2{%
- \csname u8:##1\string ##2\endcsname}%
- \def\UTFviiiThreeOctets##1##2##3{%
- \csname u8:##1\string ##2\string ##3\endcsname}%
- \def\UTFviiiFourOctets##1##2##3##4{%
- \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
- \expandafter\expandafter\expandafter\expandafter
- \expandafter\expandafter\expandafter
- \gdef\UTFviiiTmp{#2}%
- \endgroup}
- \gdef\parseXMLCharref{%
- \ifnum\countUTFz < "A0\relax
- \errhelp = \EMsimple
- \errmessage{Cannot define Unicode char value < 00A0}%
- \else\ifnum\countUTFz < "800\relax
- \parseUTFviiiA,%
- \parseUTFviiiB C\UTFviiiTwoOctets.,%
- \else\ifnum\countUTFz < "10000\relax
- \parseUTFviiiA;%
- \parseUTFviiiA,%
- \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
- \else
- \parseUTFviiiA;%
- \parseUTFviiiA,%
- \parseUTFviiiA!%
- \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
- \fi\fi\fi
- }
+% @documentencoding should change something in TeX eventually, most
+% likely, but for now just recognize it.
+\let\documentencoding = \comment
- \gdef\parseUTFviiiA#1{%
- \countUTFx = \countUTFz
- \divide\countUTFz by 64
- \countUTFy = \countUTFz
- \multiply\countUTFz by 64
- \advance\countUTFx by -\countUTFz
- \advance\countUTFx by 128
- \uccode `#1\countUTFx
- \countUTFz = \countUTFy}
-
- \gdef\parseUTFviiiB#1#2#3#4{%
- \advance\countUTFz by "#10\relax
- \uccode `#3\countUTFz
- \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
-\endgroup
-\def\utfeightchardefs{%
- \DeclareUnicodeCharacter{00A0}{\tie}
- \DeclareUnicodeCharacter{00A1}{\exclamdown}
- \DeclareUnicodeCharacter{00A3}{\pounds}
- \DeclareUnicodeCharacter{00A8}{\"{ }}
- \DeclareUnicodeCharacter{00A9}{\copyright}
- \DeclareUnicodeCharacter{00AA}{\ordf}
- \DeclareUnicodeCharacter{00AB}{\guillemetleft}
- \DeclareUnicodeCharacter{00AD}{\-}
- \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
- \DeclareUnicodeCharacter{00AF}{\={ }}
-
- \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
- \DeclareUnicodeCharacter{00B4}{\'{ }}
- \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
- \DeclareUnicodeCharacter{00BA}{\ordm}
- \DeclareUnicodeCharacter{00BB}{\guillemetright}
- \DeclareUnicodeCharacter{00BF}{\questiondown}
-
- \DeclareUnicodeCharacter{00C0}{\`A}
- \DeclareUnicodeCharacter{00C1}{\'A}
- \DeclareUnicodeCharacter{00C2}{\^A}
- \DeclareUnicodeCharacter{00C3}{\~A}
- \DeclareUnicodeCharacter{00C4}{\"A}
- \DeclareUnicodeCharacter{00C5}{\AA}
- \DeclareUnicodeCharacter{00C6}{\AE}
- \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
- \DeclareUnicodeCharacter{00C8}{\`E}
- \DeclareUnicodeCharacter{00C9}{\'E}
- \DeclareUnicodeCharacter{00CA}{\^E}
- \DeclareUnicodeCharacter{00CB}{\"E}
- \DeclareUnicodeCharacter{00CC}{\`I}
- \DeclareUnicodeCharacter{00CD}{\'I}
- \DeclareUnicodeCharacter{00CE}{\^I}
- \DeclareUnicodeCharacter{00CF}{\"I}
-
- \DeclareUnicodeCharacter{00D1}{\~N}
- \DeclareUnicodeCharacter{00D2}{\`O}
- \DeclareUnicodeCharacter{00D3}{\'O}
- \DeclareUnicodeCharacter{00D4}{\^O}
- \DeclareUnicodeCharacter{00D5}{\~O}
- \DeclareUnicodeCharacter{00D6}{\"O}
- \DeclareUnicodeCharacter{00D8}{\O}
- \DeclareUnicodeCharacter{00D9}{\`U}
- \DeclareUnicodeCharacter{00DA}{\'U}
- \DeclareUnicodeCharacter{00DB}{\^U}
- \DeclareUnicodeCharacter{00DC}{\"U}
- \DeclareUnicodeCharacter{00DD}{\'Y}
- \DeclareUnicodeCharacter{00DF}{\ss}
-
- \DeclareUnicodeCharacter{00E0}{\`a}
- \DeclareUnicodeCharacter{00E1}{\'a}
- \DeclareUnicodeCharacter{00E2}{\^a}
- \DeclareUnicodeCharacter{00E3}{\~a}
- \DeclareUnicodeCharacter{00E4}{\"a}
- \DeclareUnicodeCharacter{00E5}{\aa}
- \DeclareUnicodeCharacter{00E6}{\ae}
- \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
- \DeclareUnicodeCharacter{00E8}{\`e}
- \DeclareUnicodeCharacter{00E9}{\'e}
- \DeclareUnicodeCharacter{00EA}{\^e}
- \DeclareUnicodeCharacter{00EB}{\"e}
- \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
- \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
- \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
- \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
-
- \DeclareUnicodeCharacter{00F1}{\~n}
- \DeclareUnicodeCharacter{00F2}{\`o}
- \DeclareUnicodeCharacter{00F3}{\'o}
- \DeclareUnicodeCharacter{00F4}{\^o}
- \DeclareUnicodeCharacter{00F5}{\~o}
- \DeclareUnicodeCharacter{00F6}{\"o}
- \DeclareUnicodeCharacter{00F8}{\o}
- \DeclareUnicodeCharacter{00F9}{\`u}
- \DeclareUnicodeCharacter{00FA}{\'u}
- \DeclareUnicodeCharacter{00FB}{\^u}
- \DeclareUnicodeCharacter{00FC}{\"u}
- \DeclareUnicodeCharacter{00FD}{\'y}
- \DeclareUnicodeCharacter{00FF}{\"y}
-
- \DeclareUnicodeCharacter{0100}{\=A}
- \DeclareUnicodeCharacter{0101}{\=a}
- \DeclareUnicodeCharacter{0102}{\u{A}}
- \DeclareUnicodeCharacter{0103}{\u{a}}
- \DeclareUnicodeCharacter{0106}{\'C}
- \DeclareUnicodeCharacter{0107}{\'c}
- \DeclareUnicodeCharacter{0108}{\^C}
- \DeclareUnicodeCharacter{0109}{\^c}
- \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
- \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
- \DeclareUnicodeCharacter{010C}{\v{C}}
- \DeclareUnicodeCharacter{010D}{\v{c}}
- \DeclareUnicodeCharacter{010E}{\v{D}}
-
- \DeclareUnicodeCharacter{0112}{\=E}
- \DeclareUnicodeCharacter{0113}{\=e}
- \DeclareUnicodeCharacter{0114}{\u{E}}
- \DeclareUnicodeCharacter{0115}{\u{e}}
- \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
- \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
- \DeclareUnicodeCharacter{011A}{\v{E}}
- \DeclareUnicodeCharacter{011B}{\v{e}}
- \DeclareUnicodeCharacter{011C}{\^G}
- \DeclareUnicodeCharacter{011D}{\^g}
- \DeclareUnicodeCharacter{011E}{\u{G}}
- \DeclareUnicodeCharacter{011F}{\u{g}}
-
- \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
- \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
- \DeclareUnicodeCharacter{0124}{\^H}
- \DeclareUnicodeCharacter{0125}{\^h}
- \DeclareUnicodeCharacter{0128}{\~I}
- \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
- \DeclareUnicodeCharacter{012A}{\=I}
- \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
- \DeclareUnicodeCharacter{012C}{\u{I}}
- \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
-
- \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
- \DeclareUnicodeCharacter{0131}{\dotless{i}}
- \DeclareUnicodeCharacter{0132}{IJ}
- \DeclareUnicodeCharacter{0133}{ij}
- \DeclareUnicodeCharacter{0134}{\^J}
- \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
- \DeclareUnicodeCharacter{0139}{\'L}
- \DeclareUnicodeCharacter{013A}{\'l}
-
- \DeclareUnicodeCharacter{0141}{\L}
- \DeclareUnicodeCharacter{0142}{\l}
- \DeclareUnicodeCharacter{0143}{\'N}
- \DeclareUnicodeCharacter{0144}{\'n}
- \DeclareUnicodeCharacter{0147}{\v{N}}
- \DeclareUnicodeCharacter{0148}{\v{n}}
- \DeclareUnicodeCharacter{014C}{\=O}
- \DeclareUnicodeCharacter{014D}{\=o}
- \DeclareUnicodeCharacter{014E}{\u{O}}
- \DeclareUnicodeCharacter{014F}{\u{o}}
-
- \DeclareUnicodeCharacter{0150}{\H{O}}
- \DeclareUnicodeCharacter{0151}{\H{o}}
- \DeclareUnicodeCharacter{0152}{\OE}
- \DeclareUnicodeCharacter{0153}{\oe}
- \DeclareUnicodeCharacter{0154}{\'R}
- \DeclareUnicodeCharacter{0155}{\'r}
- \DeclareUnicodeCharacter{0158}{\v{R}}
- \DeclareUnicodeCharacter{0159}{\v{r}}
- \DeclareUnicodeCharacter{015A}{\'S}
- \DeclareUnicodeCharacter{015B}{\'s}
- \DeclareUnicodeCharacter{015C}{\^S}
- \DeclareUnicodeCharacter{015D}{\^s}
- \DeclareUnicodeCharacter{015E}{\cedilla{S}}
- \DeclareUnicodeCharacter{015F}{\cedilla{s}}
-
- \DeclareUnicodeCharacter{0160}{\v{S}}
- \DeclareUnicodeCharacter{0161}{\v{s}}
- \DeclareUnicodeCharacter{0162}{\cedilla{t}}
- \DeclareUnicodeCharacter{0163}{\cedilla{T}}
- \DeclareUnicodeCharacter{0164}{\v{T}}
-
- \DeclareUnicodeCharacter{0168}{\~U}
- \DeclareUnicodeCharacter{0169}{\~u}
- \DeclareUnicodeCharacter{016A}{\=U}
- \DeclareUnicodeCharacter{016B}{\=u}
- \DeclareUnicodeCharacter{016C}{\u{U}}
- \DeclareUnicodeCharacter{016D}{\u{u}}
- \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
- \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
-
- \DeclareUnicodeCharacter{0170}{\H{U}}
- \DeclareUnicodeCharacter{0171}{\H{u}}
- \DeclareUnicodeCharacter{0174}{\^W}
- \DeclareUnicodeCharacter{0175}{\^w}
- \DeclareUnicodeCharacter{0176}{\^Y}
- \DeclareUnicodeCharacter{0177}{\^y}
- \DeclareUnicodeCharacter{0178}{\"Y}
- \DeclareUnicodeCharacter{0179}{\'Z}
- \DeclareUnicodeCharacter{017A}{\'z}
- \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
- \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
- \DeclareUnicodeCharacter{017D}{\v{Z}}
- \DeclareUnicodeCharacter{017E}{\v{z}}
-
- \DeclareUnicodeCharacter{01C4}{D\v{Z}}
- \DeclareUnicodeCharacter{01C5}{D\v{z}}
- \DeclareUnicodeCharacter{01C6}{d\v{z}}
- \DeclareUnicodeCharacter{01C7}{LJ}
- \DeclareUnicodeCharacter{01C8}{Lj}
- \DeclareUnicodeCharacter{01C9}{lj}
- \DeclareUnicodeCharacter{01CA}{NJ}
- \DeclareUnicodeCharacter{01CB}{Nj}
- \DeclareUnicodeCharacter{01CC}{nj}
- \DeclareUnicodeCharacter{01CD}{\v{A}}
- \DeclareUnicodeCharacter{01CE}{\v{a}}
- \DeclareUnicodeCharacter{01CF}{\v{I}}
-
- \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
- \DeclareUnicodeCharacter{01D1}{\v{O}}
- \DeclareUnicodeCharacter{01D2}{\v{o}}
- \DeclareUnicodeCharacter{01D3}{\v{U}}
- \DeclareUnicodeCharacter{01D4}{\v{u}}
-
- \DeclareUnicodeCharacter{01E2}{\={\AE}}
- \DeclareUnicodeCharacter{01E3}{\={\ae}}
- \DeclareUnicodeCharacter{01E6}{\v{G}}
- \DeclareUnicodeCharacter{01E7}{\v{g}}
- \DeclareUnicodeCharacter{01E8}{\v{K}}
- \DeclareUnicodeCharacter{01E9}{\v{k}}
-
- \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
- \DeclareUnicodeCharacter{01F1}{DZ}
- \DeclareUnicodeCharacter{01F2}{Dz}
- \DeclareUnicodeCharacter{01F3}{dz}
- \DeclareUnicodeCharacter{01F4}{\'G}
- \DeclareUnicodeCharacter{01F5}{\'g}
- \DeclareUnicodeCharacter{01F8}{\`N}
- \DeclareUnicodeCharacter{01F9}{\`n}
- \DeclareUnicodeCharacter{01FC}{\'{\AE}}
- \DeclareUnicodeCharacter{01FD}{\'{\ae}}
- \DeclareUnicodeCharacter{01FE}{\'{\O}}
- \DeclareUnicodeCharacter{01FF}{\'{\o}}
-
- \DeclareUnicodeCharacter{021E}{\v{H}}
- \DeclareUnicodeCharacter{021F}{\v{h}}
-
- \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
- \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
- \DeclareUnicodeCharacter{0228}{\cedilla{E}}
- \DeclareUnicodeCharacter{0229}{\cedilla{e}}
- \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
- \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
-
- \DeclareUnicodeCharacter{0232}{\=Y}
- \DeclareUnicodeCharacter{0233}{\=y}
- \DeclareUnicodeCharacter{0237}{\dotless{j}}
-
- \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
- \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
- \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
- \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
- \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
- \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
- \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
- \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
- \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
- \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
- \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
- \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
-
- \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
- \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
-
- \DeclareUnicodeCharacter{1E20}{\=G}
- \DeclareUnicodeCharacter{1E21}{\=g}
- \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
- \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
- \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
- \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
- \DeclareUnicodeCharacter{1E26}{\"H}
- \DeclareUnicodeCharacter{1E27}{\"h}
-
- \DeclareUnicodeCharacter{1E30}{\'K}
- \DeclareUnicodeCharacter{1E31}{\'k}
- \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
- \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
- \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
- \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
- \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
- \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
- \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
- \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
- \DeclareUnicodeCharacter{1E3E}{\'M}
- \DeclareUnicodeCharacter{1E3F}{\'m}
-
- \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
- \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
- \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
- \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
- \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
- \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
- \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
- \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
- \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
- \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
-
- \DeclareUnicodeCharacter{1E54}{\'P}
- \DeclareUnicodeCharacter{1E55}{\'p}
- \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
- \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
- \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
- \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
- \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
- \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
- \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
- \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
-
- \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
- \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
- \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
- \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
- \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
- \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
- \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
- \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
- \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
- \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
-
- \DeclareUnicodeCharacter{1E7C}{\~V}
- \DeclareUnicodeCharacter{1E7D}{\~v}
- \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
- \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
-
- \DeclareUnicodeCharacter{1E80}{\`W}
- \DeclareUnicodeCharacter{1E81}{\`w}
- \DeclareUnicodeCharacter{1E82}{\'W}
- \DeclareUnicodeCharacter{1E83}{\'w}
- \DeclareUnicodeCharacter{1E84}{\"W}
- \DeclareUnicodeCharacter{1E85}{\"w}
- \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
- \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
- \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
- \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
- \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
- \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
- \DeclareUnicodeCharacter{1E8C}{\"X}
- \DeclareUnicodeCharacter{1E8D}{\"x}
- \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
- \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
-
- \DeclareUnicodeCharacter{1E90}{\^Z}
- \DeclareUnicodeCharacter{1E91}{\^z}
- \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
- \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
- \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
- \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
- \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
- \DeclareUnicodeCharacter{1E97}{\"t}
- \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
- \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
-
- \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
- \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
-
- \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
- \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
- \DeclareUnicodeCharacter{1EBC}{\~E}
- \DeclareUnicodeCharacter{1EBD}{\~e}
-
- \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
- \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
- \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
- \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
-
- \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
- \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
-
- \DeclareUnicodeCharacter{1EF2}{\`Y}
- \DeclareUnicodeCharacter{1EF3}{\`y}
- \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
-
- \DeclareUnicodeCharacter{1EF8}{\~Y}
- \DeclareUnicodeCharacter{1EF9}{\~y}
-
- \DeclareUnicodeCharacter{2013}{--}
- \DeclareUnicodeCharacter{2014}{---}
- \DeclareUnicodeCharacter{2018}{\quoteleft}
- \DeclareUnicodeCharacter{2019}{\quoteright}
- \DeclareUnicodeCharacter{201A}{\quotesinglbase}
- \DeclareUnicodeCharacter{201C}{\quotedblleft}
- \DeclareUnicodeCharacter{201D}{\quotedblright}
- \DeclareUnicodeCharacter{201E}{\quotedblbase}
- \DeclareUnicodeCharacter{2022}{\bullet}
- \DeclareUnicodeCharacter{2026}{\dots}
- \DeclareUnicodeCharacter{2039}{\guilsinglleft}
- \DeclareUnicodeCharacter{203A}{\guilsinglright}
- \DeclareUnicodeCharacter{20AC}{\euro}
-
- \DeclareUnicodeCharacter{2192}{\expansion}
- \DeclareUnicodeCharacter{21D2}{\result}
-
- \DeclareUnicodeCharacter{2212}{\minus}
- \DeclareUnicodeCharacter{2217}{\point}
- \DeclareUnicodeCharacter{2261}{\equiv}
-}% end of \utfeightchardefs
-
-
-% US-ASCII character definitions.
-\def\asciichardefs{% nothing need be done
- \relax
-}
-
-% Make non-ASCII characters printable again for compatibility with
-% existing Texinfo documents that may use them, even without declaring a
-% document encoding.
+% Page size parameters.
%
-\setnonasciicharscatcode \other
-
-
-\message{formatting,}
-
\newdimen\defaultparindent \defaultparindent = 15pt
\chapheadingskip = 15pt plus 4pt minus 2pt
@@ -8586,7 +6390,7 @@
% Don't be so finicky about underfull hboxes, either.
\hbadness = 2000
-% Following George Bush, get rid of widows and orphans.
+% Following George Bush, just get rid of widows and orphans.
\widowpenalty=10000
\clubpenalty=10000
@@ -8604,9 +6408,9 @@
\fi
}
-% Parameters in order: 1) textheight; 2) textwidth;
-% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
-% 7) physical page height; 8) physical page width.
+% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
+% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
+% physical page width.
%
% We also call \setleading{\textleading}, so the caller should define
% \textleading. The caller should also set \parskip.
@@ -8633,10 +6437,6 @@
\ifpdf
\pdfpageheight #7\relax
\pdfpagewidth #8\relax
- % if we don't reset these, they will remain at "1 true in" of
- % whatever layout pdftex was dumped with.
- \pdfhorigin = 1 true in
- \pdfvorigin = 1 true in
\fi
%
\setleading{\textleading}
@@ -8651,19 +6451,19 @@
\textleading = 13.2pt
%
% If page is nothing but text, make it come out even.
- \internalpagesizes{607.2pt}{6in}% that's 46 lines
+ \internalpagesizes{46\baselineskip}{6in}%
{\voffset}{.25in}%
{\bindingoffset}{36pt}%
{11in}{8.5in}%
}}
-% Use @smallbook to reset parameters for 7x9.25 trim size.
+% Use @smallbook to reset parameters for 7x9.5 (or so) format.
\def\smallbook{{\globaldefs = 1
\parskip = 2pt plus 1pt
\textleading = 12pt
%
\internalpagesizes{7.5in}{5in}%
- {-.2in}{0in}%
+ {\voffset}{.25in}%
{\bindingoffset}{16pt}%
{9.25in}{7in}%
%
@@ -8674,24 +6474,6 @@
\defbodyindent = .5cm
}}
-% Use @smallerbook to reset parameters for 6x9 trim size.
-% (Just testing, parameters still in flux.)
-\def\smallerbook{{\globaldefs = 1
- \parskip = 1.5pt plus 1pt
- \textleading = 12pt
- %
- \internalpagesizes{7.4in}{4.8in}%
- {-.2in}{-.4in}%
- {0pt}{14pt}%
- {9in}{6in}%
- %
- \lispnarrowing = 0.25in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = .4cm
-}}
-
% Use @afourpaper to print on European A4 paper.
\def\afourpaper{{\globaldefs = 1
\parskip = 3pt plus 2pt minus 1pt
@@ -8707,7 +6489,7 @@
% \global\normaloffset = -6mm
% \global\bindingoffset = 10mm
% @end tex
- \internalpagesizes{673.2pt}{160mm}% that's 51 lines
+ \internalpagesizes{51\baselineskip}{160mm}
{\voffset}{\hoffset}%
{\bindingoffset}{44pt}%
{297mm}{210mm}%
@@ -8764,7 +6546,8 @@
% Perhaps we should allow setting the margins, \topskip, \parskip,
% and/or leading, also. Or perhaps we should compute them somehow.
%
-\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizes{\parsearg\pagesizesxxx}
+\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
\def\pagesizesyyy#1,#2,#3\finish{{%
\setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
\globaldefs = 1
@@ -8772,7 +6555,7 @@
\parskip = 3pt plus 2pt minus 1pt
\setleading{\textleading}%
%
- \dimen0 = #1\relax
+ \dimen0 = #1
\advance\dimen0 by \voffset
%
\dimen2 = \hsize
@@ -8811,8 +6594,8 @@
\def\normalplus{+}
\def\normaldollar{$}%$ font-lock fix
-% This macro is used to make a character print one way in \tt
-% (where it can probably be output as-is), and another way in other fonts,
+% This macro is used to make a character print one way in ttfont
+% where it can probably just be output, and another way in other fonts,
% where something hairier probably needs to be done.
%
% #1 is what to print if we are indeed using \tt; #2 is what to print
@@ -8844,7 +6627,6 @@
\catcode`\_=\active
\def_{\ifusingtt\normalunderscore\_}
-\let\realunder=_
% Subroutine for the previous macro.
\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
@@ -8861,49 +6643,46 @@
\catcode`\$=\active
\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+% Set up an active definition for =, but don't enable it most of the time.
+{\catcode`\==\active
+\global\def={{\tt \char 61}}}
+
+\catcode`+=\active
+\catcode`\_=\active
+
% If a .fmt file is being used, characters that might appear in a file
% name cannot be active until we have parsed the command line.
% So turn them off again, and have \everyjob (or @setfilename) turn them on.
% \otherifyactive is called near the end of this file.
\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-% Used sometimes to turn off (effectively) the active characters even after
-% parsing them.
-\def\turnoffactive{%
- \normalturnoffactive
- \otherbackslash
-}
-
\catcode`\ =0
-% \backslashcurfont outputs one backslash character in current font,
+% \rawbackslashxx outputs one backslash character in current font,
% as in \char`\\.
-\global\chardef\backslashcurfont=`\\
-\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work
+\global\chardef\rawbackslashxx=`\\
-% \realbackslash is an actual character `\' with catcode other, and
-% \doublebackslash is two of them (for the pdf outlines).
-{\catcode`\\=\other @gdef realbackslash{\} @gdef doublebackslash{\\}}
-
-% In texinfo, backslash is an active character; it prints the backslash
-% in fixed width font.
-\catcode`\\=\active
- def@normalbackslash{{ tt@backslashcurfont}}
-% On startup, @fixbackslash assigns:
-% @let \ = @normalbackslash
-
-% \rawbackslash defines an active \ to do \backslashcurfont.
+% \rawbackslash defines an active \ to do \rawbackslashxx.
% \otherbackslash defines an active \ to be a literal `\' character with
% catcode other.
- gdef@rawbackslash{ let\=@backslashcurfont}
- gdef@otherbackslash{ let\=@realbackslash}
+{\catcode`\\=\active
+ @gdef rawbackslash{@let\= rawbackslashxx}
+ @gdef otherbackslash{@let\= realbackslash}
+}
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
-%
- def@normalturnoffactive{%
- @let\= normalbackslash
+% \realbackslash is an actual character `\' with catcode other.
+{\catcode`\\=\other @gdef realbackslash{\}}
+
+% \normalbackslash outputs one backslash in fixed width font.
+\def\normalbackslash{{\tt\rawbackslashxx}}
+
+\catcode`\\=\active
+
+% Used sometimes to turn off (effectively) the active characters
+% even after parsing them.
+ def@turnoffactive{%
@let"= normaldoublequote
+ @let\= realbackslash
@let~= normaltilde
@let^= normalcaret
@let_= normalunderscore
@@ -8912,9 +6691,14 @@
@let>= normalgreater
@let+= normalplus
@let$= normaldollar %$ font-lock fix
- @unsepspaces
}
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'. (Thus, \ is not expandable when this is in
+% effect.)
+%
+ def@normalturnoffactive{ turnoffactive @let\= normalbackslash}
+
% Make _ and + \other characters, temporarily.
% This is canceled by @fixbackslash.
@otherifyactive
@@ -8927,9 +6711,9 @@
@global let\ = @eatinput
% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\' in the file would cause an error. This macro tries to fix
+% the first `\{ in the file would cause an error. This macro tries to fix
% that, assuming it is called before the first `\' could plausibly occur.
-% Also turn back on active characters that might appear in the input
+% Also back turn on active characters that might appear in the input
% file name, in case not using a pre-dumped format.
%
@gdef fixbackslash{%
@@ -8946,6 +6730,10 @@
@catcode` # = @other
@catcode` % = @other
+ c Set initial fonts.
+ textfonts
+ rm
+
@c Local variables:
@c eval: (add-hook 'write-file-hooks 'time-stamp)
@@ -8954,9 +6742,3 @@
@c time-stamp-format: "%:y-%02m-%02d.%02H"
@c time-stamp-end: "}"
@c End:
-
- c vim:sw=2:
-
- ignore
- arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
- end ignore
Modified: branches/gcomprixogoo/install-sh
==============================================================================
--- branches/gcomprixogoo/install-sh (original)
+++ branches/gcomprixogoo/install-sh Wed Jul 30 23:37:49 2008
@@ -1,8 +1,7 @@
#!/bin/sh
+#
# install - install a program, script, or datafile
-
-scriptversion=2006-12-25.00
-
+#
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
@@ -39,481 +38,257 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch.
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
-nl='
-'
-IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit="${DOITPROG-}"
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
rmcmd="$rmprog -f"
-stripcmd=
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd=$cpprog
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
-src=
-dst=
-dir_arg=
-dst_arg=
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
-copy_on_change=false
-no_target_directory=
+if [ x"$src" = x ]
+then
+ echo "$0: no input file specified" >&2
+ exit 1
+else
+ :
+fi
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d "$dst" ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=$mkdirprog
+ fi
+else
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f "$src" ] || [ -d "$src" ]
+ then
+ :
+ else
+ echo "$0: $src does not exist" >&2
+ exit 1
+ fi
-Options:
- --help display this help and exit.
- --version display version info and exit.
+ if [ x"$dst" = x ]
+ then
+ echo "$0: no destination specified" >&2
+ exit 1
+ else
+ :
+ fi
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
-"
+ if [ -d "$dst" ]
+ then
+ dst=$dst/`basename "$src"`
+ else
+ :
+ fi
+fi
-while test $# -ne 0; do
- case $1 in
- -c) ;;
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
- -C) copy_on_change=true;;
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
- -d) dir_arg=true;;
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+ '
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@% g' -e 's ^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp=$pathcomp$1
+ shift
+
+ if [ ! -d "$pathcomp" ] ;
+ then
+ $mkdirprog "$pathcomp"
+ else
+ :
+ fi
- -g) chgrpcmd="$chgrpprog $2"
- shift;;
+ pathcomp=$pathcomp/
+done
+fi
- --help) echo "$usage"; exit $?;;
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd "$dst" &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
- -m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+# If we're going to rename the final executable, determine the name now.
- -o) chowncmd="$chownprog $2"
- shift;;
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ dstfile=`basename "$dst" $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
- -s) stripcmd=$stripprog;;
+# don't allow the sed command to completely eliminate the filename
- -t) dst_arg=$2
- shift;;
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename "$dst"`
+ else
+ :
+ fi
- -T) no_target_directory=true;;
+# Make a couple of temp file names in the proper directory.
- --version) echo "$0 $scriptversion"; exit $?;;
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
- --) shift
- break;;
+# Trap to clean up temp files at exit.
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
- *) break;;
- esac
- shift
-done
+# Move or copy the file name to the temp name
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $
- for arg
- do
- if test -n "$dst_arg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
- shift # fnord
- fi
- shift # arg
- dst_arg=$arg
- done
-fi
+ $doit $instcmd "$src" "$dsttmp" &&
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
+# and set any options; do chmod last to preserve setuid bits
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dst_arg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dst_arg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst;;
- esac
+# Now remove or move aside any old file at destination location. We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons. In this case, the final cleanup
+# might fail but the new file should still install successfully.
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
+{
+ if [ -f "$dstdir/$dstfile" ]
+ then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+ $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+ {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
else
- mkdir_mode=
+ :
fi
+} &&
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
+# Now rename the file to the real destination.
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix='/';;
- -*) prefix='./';;
- *) prefix='';;
- esac
-
- eval "$initialize_posix_glob"
-
- oIFS=$IFS
- IFS=/
- $posix_glob set -f
- set fnord $dstdir
- shift
- $posix_glob set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
+fi &&
- trap '' 0
- fi
-done
+# The final little trick to "correctly" pass the exit status to the exit trap.
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+{
+ (exit 0); exit
+}
Modified: branches/gcomprixogoo/src/gcompris/file_selector.c
==============================================================================
--- branches/gcomprixogoo/src/gcompris/file_selector.c (original)
+++ branches/gcomprixogoo/src/gcompris/file_selector.c Wed Jul 30 23:37:49 2008
@@ -571,8 +571,6 @@
g_dir_close(dir);
g_list_free(file_list);
- /* Warning: we don't scale the internal canvas dynamicaly */
- goo_canvas_set_scale (GOO_CANVAS(canvas), gc_zoom_factor_get());
}
/* Callback when a directory is selected */
Modified: branches/gcomprixogoo/src/gcompris/images_selector.c
==============================================================================
--- branches/gcomprixogoo/src/gcompris/images_selector.c (original)
+++ branches/gcomprixogoo/src/gcompris/images_selector.c Wed Jul 30 23:37:49 2008
@@ -28,6 +28,7 @@
#include <libxml/parser.h>
#include "gcompris.h"
+#include "gc_core.h"
#define SOUNDLISTFILE PACKAGE
@@ -40,7 +41,6 @@
gpointer data);
static void item_event_scroll(GtkAdjustment *adj,
GooCanvas *canvas);
-static gboolean read_xml_file(gchar *fname);
static gboolean read_dataset_directory(gchar *dataset_dir);
static void display_image(gchar *imagename, GooCanvasItem *rootitem);
static void free_stuff (GSList *data);
@@ -64,7 +64,7 @@
#define DRAWING_AREA_X1 111.0
#define DRAWING_AREA_Y1 14.0
#define DRAWING_AREA_X2 774.0
-#define DRAWING_AREA_Y2 500.0
+#define DRAWING_AREA_Y2 460.0
/* Represent the limits of list area */
#define LIST_AREA_X1 18.0
@@ -112,7 +112,7 @@
gint x_start = 0;
gchar *dataseturl = NULL;
- GtkWidget *w;
+ GtkWidget *w;
if(rootitem)
return;
@@ -163,8 +163,10 @@
list_bg_item = goo_canvas_rect_new (goo_canvas_get_root_item(GOO_CANVAS(canvas_list_selector)),
0,
0,
- LIST_AREA_X2 - LIST_AREA_X1,
- LIST_AREA_Y2 - LIST_AREA_Y1,
+ (LIST_AREA_X2 - LIST_AREA_X1)
+ * gc_zoom_factor_get(),
+ (LIST_AREA_Y2 - LIST_AREA_Y1)
+ * gc_zoom_factor_get(),
"fill-color-rgba", gc_skin_get_color("gcompris/imageselectbg"),
"line-width", 0.0,
NULL);
@@ -173,7 +175,8 @@
GTK_ADJUSTMENT (gtk_adjustment_new (0.00, 0.00,
0.00,
10, IMAGE_HEIGHT,
- LIST_AREA_Y2 - LIST_AREA_Y1)
+ (LIST_AREA_Y2 - LIST_AREA_Y1)
+ * gc_zoom_factor_get())
);
w = gtk_vscrollbar_new (list_adj);
@@ -203,7 +206,7 @@
DRAWING_AREA_X1,
DRAWING_AREA_Y1,
DRAWING_AREA_X2 - DRAWING_AREA_X1,
- DRAWING_AREA_Y2 - DRAWING_AREA_Y1 - 35.0,
+ DRAWING_AREA_Y2 - DRAWING_AREA_Y1,
NULL);
gtk_widget_show (canvas_image_selector);
@@ -213,8 +216,10 @@
goo_canvas_rect_new (goo_canvas_get_root_item(GOO_CANVAS(canvas_image_selector)),
0,
0,
- DRAWING_AREA_X2 - DRAWING_AREA_X1,
- DRAWING_AREA_Y2 - DRAWING_AREA_Y1,
+ (DRAWING_AREA_X2 - DRAWING_AREA_X1)
+ * gc_zoom_factor_get(),
+ (DRAWING_AREA_Y2 - DRAWING_AREA_Y1)
+ * gc_zoom_factor_get(),
"fill-color-rgba", gc_skin_get_color("gcompris/imageselectbg"),
"line-width", 0.0,
NULL);
@@ -223,7 +228,8 @@
GTK_ADJUSTMENT (gtk_adjustment_new (0.00, 0.00,
0.00,
10, IMAGE_HEIGHT,
- DRAWING_AREA_Y2 - DRAWING_AREA_Y1)
+ (DRAWING_AREA_Y2 - DRAWING_AREA_Y1)
+ * gc_zoom_factor_get())
);
w = gtk_vscrollbar_new (image_adj);
@@ -264,34 +270,6 @@
read_dataset_directory(dataseturl);
}
- else if(dataseturl)
- {
- /* Read the given data set file, local or net */
- read_xml_file(dataseturl);
- }
- else
- {
- /* Network code for dataset directory */
- GSList *filelist = NULL;
- GSList *i = NULL;
-
- g_free(dataseturl);
- dataseturl = g_strconcat("boards/", dataset, NULL);
-
- filelist = gc_net_dir_read_name(dataseturl, ".xml");
-
- for (i = filelist; i != NULL; i = g_slist_next (i))
- {
- gchar *url = gc_file_find_absolute(i->data,
- NULL);
- g_warning("processing dataset=%s\n", (char *)i->data);
- read_xml_file(url);
- g_free(url);
- }
-
- g_slist_free(filelist);
-
- }
g_free(dataseturl);
/*
@@ -374,8 +352,8 @@
if(!pixmap)
return;
- iw = IMAGE_WIDTH;
- ih = IMAGE_HEIGHT;
+ iw = IMAGE_WIDTH * gc_zoom_factor_get();
+ ih = IMAGE_HEIGHT * gc_zoom_factor_get();
/* Calc the max to resize width or height */
xratio = (double) ((iw/(double)gdk_pixbuf_get_width(pixmap)));
@@ -396,15 +374,16 @@
imagename);
gc_item_focus_init(item, NULL);
- ix += IMAGE_WIDTH + IMAGE_GAP;
- if(ix >= DRAWING_AREA_X2 - DRAWING_AREA_X1 - IMAGE_GAP)
+ ix += iw + IMAGE_GAP;
+ if(ix >= (DRAWING_AREA_X2 - DRAWING_AREA_X1)
+ * gc_zoom_factor_get() - IMAGE_GAP)
{
ix = 0;
- iy += IMAGE_HEIGHT + IMAGE_GAP;
+ iy += ih + IMAGE_GAP;
}
/* Cannot use GINT_TO_POINTER with a constant calculation */
- guint iy_calc = iy + (IMAGE_HEIGHT + IMAGE_GAP)*2;
+ guint iy_calc = iy + (ih + IMAGE_GAP)*2;
g_object_set_data (G_OBJECT (root_item), "iy", GINT_TO_POINTER (iy_calc));
}
@@ -426,8 +405,8 @@
pixmap = gc_pixmap_load(imagename);
- iw = LIST_IMAGE_WIDTH;
- ih = LIST_IMAGE_HEIGHT;
+ iw = LIST_IMAGE_WIDTH * gc_zoom_factor_get();
+ ih = LIST_IMAGE_HEIGHT * gc_zoom_factor_get();
/* Calc the max to resize width or height */
xratio = (double) ((iw/(double)gdk_pixbuf_get_width(pixmap)));
@@ -449,14 +428,16 @@
imagename);
gc_item_focus_init(item, NULL);
- isy += LIST_IMAGE_HEIGHT + IMAGE_GAP;
+ isy += ih + IMAGE_GAP;
- gdouble upper = MAX(isy + LIST_IMAGE_HEIGHT + IMAGE_GAP,
- LIST_AREA_Y2 - LIST_AREA_Y1);
+ gdouble upper = MAX(isy + ih + IMAGE_GAP,
+ (LIST_AREA_Y2 - LIST_AREA_Y1)
+ * gc_zoom_factor_get());
goo_canvas_set_bounds (GOO_CANVAS(canvas_list_selector),
0, 0,
- LIST_AREA_X2 - LIST_AREA_X1,
+ (LIST_AREA_X2 - LIST_AREA_X1)
+ * gc_zoom_factor_get(),
upper);
g_object_set(list_bg_item,
@@ -536,11 +517,13 @@
/* Set the image scrollbar back to its max position */
last_iy = GPOINTER_TO_INT (g_object_get_data (G_OBJECT (rootitem_set), "iy"));
gdouble upper = MAX(last_iy,
- DRAWING_AREA_Y2 - DRAWING_AREA_Y1);
+ (DRAWING_AREA_Y2 - DRAWING_AREA_Y1)
+ * gc_zoom_factor_get());
goo_canvas_set_bounds (GOO_CANVAS(canvas_image_selector),
0, 0,
- DRAWING_AREA_X2 - DRAWING_AREA_X1,
+ (DRAWING_AREA_X2 - DRAWING_AREA_X1)
+ * gc_zoom_factor_get(),
upper);
g_object_set(image_bg_item,
@@ -763,45 +746,6 @@
}
-/* read an xml file into our memory structures and update our view,
- * dump any old data we have in memory if we can load a new set
- *
- * \param fname is an absolute file name
- *
- */
-static gboolean
-read_xml_file(gchar *fname)
-{
- /* pointer to the new doc */
- xmlDocPtr doc;
-
- g_return_val_if_fail(fname!=NULL, FALSE);
-
- doc = gc_net_load_xml(fname);
-
- /* in case something went wrong */
- if(!doc)
- return FALSE;
-
- if(/* if there is no root element */
- !doc->children ||
- /* if it doesn't have a name */
- !doc->children->name ||
- /* if it isn't the good node */
- g_strcasecmp((gchar *)doc->children->name, "ImageSetRoot")!=0) {
- xmlFreeDoc(doc);
- return FALSE;
- }
-
- /* parse our document and replace old data */
- parse_doc(doc);
-
- xmlFreeDoc(doc);
-
- return TRUE;
-}
-
-
/** read an xml file into our memory structures and update our view,
* dump any old data we have in memory if we can load a new set
*
Modified: branches/gcomprixogoo/src/runit.sh
==============================================================================
--- branches/gcomprixogoo/src/runit.sh (original)
+++ branches/gcomprixogoo/src/runit.sh Wed Jul 30 23:37:49 2008
@@ -33,5 +33,6 @@
-S $menudir/../../boards/skins \
-M $menudir \
--locale_dir=$path/locale \
+ --reread-menu \
-l $section/$activity $*
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
