libepc r194 - in trunk: . examples libepc libepc-ui m4 po
- From: hasselmm svn gnome org
- To: svn-commits-list gnome org
- Subject: libepc r194 - in trunk: . examples libepc libepc-ui m4 po
- Date: Wed, 16 Jan 2008 13:54:23 +0000 (GMT)
Author: hasselmm
Date: Wed Jan 16 13:54:22 2008
New Revision: 194
URL: http://svn.gnome.org/viewvc/libepc?rev=194&view=rev
Log:
Provide gettext support.
* configure.ac: Update for gettext.
* Makefile.am: Add libepc/i18n.c. Define LOCALEDIR.
Add po folder and other gettext related stuff.
* libepc/consumer.c, libepc/publisher.c, libepc/shell.c, libepc/tls.c,
libepc-ui/password-dialog.c, libepc-ui/progress-window.c:
Include libepc/i18n.h instead of glib/gi18n-lib.h.
* libepc/i18n.c, libepc/i18n.h: Add epc_gettext.
* examples/simple-publisher.c: Call setlocale for localization.
* ABOUT-NLS, config.rpath, m4/*, po/*: Various gettextize artifacts.
* po/de.po, po/LINGUAS: Add German translation.
Added:
trunk/ABOUT-NLS
trunk/config.rpath (contents, props changed)
trunk/libepc/i18n.c
trunk/libepc/i18n.h
trunk/m4/
trunk/m4/gettext.m4
trunk/m4/iconv.m4
trunk/m4/lib-ld.m4
trunk/m4/lib-link.m4
trunk/m4/lib-prefix.m4
trunk/m4/nls.m4
trunk/m4/po.m4
trunk/m4/progtest.m4
trunk/po/
trunk/po/.gitignore
trunk/po/LINGUAS
trunk/po/Makefile.in.in
trunk/po/Makevars
trunk/po/POTFILES.in
trunk/po/Rules-quot
trunk/po/boldquot.sed
trunk/po/de.po
trunk/po/en boldquot header
trunk/po/en quot header
trunk/po/insert-header.sin
trunk/po/libepc.pot
trunk/po/quot.sed
trunk/po/remove-potcdate.sin
Modified:
trunk/ChangeLog
trunk/Makefile.am
trunk/configure.ac
trunk/examples/simple-publisher.c
trunk/libepc-ui/password-dialog.c
trunk/libepc-ui/progress-window.c
trunk/libepc/consumer.c
trunk/libepc/publisher.c
trunk/libepc/shell.c
trunk/libepc/tls.c
Added: trunk/ABOUT-NLS
==============================================================================
--- (empty file)
+++ trunk/ABOUT-NLS Wed Jan 16 13:54:22 2008
@@ -0,0 +1,1101 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+ When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used. The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+1.1 Quick configuration advice
+==============================
+
+If you want to exploit the full power of internationalization, you
+should configure it using
+
+ ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed. So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation. Future versions of GNU `gettext' will
+very likely convey even more functionality. So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+ So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+1.2 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. If not, the included GNU
+`gettext' library will be used. This library is wholly contained
+within this package, usually in the `intl/' subdirectory, so prior
+installation of the GNU `gettext' package is _not_ required.
+Installers may use special options at configuration time for changing
+the default behaviour. The commands:
+
+ ./configure --with-included-gettext
+ ./configure --disable-nls
+
+will, respectively, bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this. This might not be desirable. You should use
+the more recent version of the GNU `gettext' library. I.e. if the file
+`intl/VERSION' shows that the library which comes with this package is
+more recent, you should use
+
+ ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+ The configuration process will not test for the `catgets' function
+and therefore it will not be used. The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.3 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code,
+and `CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.4 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
+area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to `sv-request li org', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `translation iro umontreal ca' to reach the
+coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.5 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of October
+2006. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am ar az be bg bs ca cs cy da de el en en_GB eo
+ +----------------------------------------------------+
+ GNUnet | [] |
+ a2ps | [] [] [] [] [] |
+ aegis | () |
+ ant-phone | () |
+ anubis | [] |
+ ap-utils | |
+ aspell | [] [] [] [] [] |
+ bash | [] [] [] |
+ batchelor | [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | [] |
+ bison | [] [] |
+ bison-runtime | |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ console-tools | [] [] |
+ coreutils | [] [] [] |
+ cpio | |
+ cpplib | [] [] [] |
+ cryptonit | [] |
+ darkstat | [] () [] |
+ dialog | [] [] [] [] [] [] |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ error | [] [] [] [] |
+ fetchmail | [] [] () [] |
+ fileutils | [] [] |
+ findutils | [] [] [] |
+ flex | [] [] [] |
+ fslint | [] |
+ gas | |
+ gawk | [] [] [] |
+ gbiff | [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] |
+ gimp-print | [] [] [] [] |
+ gip | [] |
+ gliv | [] |
+ glunarclock | [] |
+ gmult | [] [] |
+ gnubiff | () |
+ gnucash | () () [] |
+ gnucash-glossary | [] () |
+ gnuedu | |
+ gnulib | [] [] [] [] [] [] |
+ gnunet-gtk | |
+ gnutls | |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | |
+ gpe-edit | [] |
+ gpe-filemanager | |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] |
+ gpe-taskmanager | [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] |
+ gpsdrive | () () |
+ gramadoir | [] [] |
+ grep | [] [] [] [] [] [] |
+ gretl | |
+ gsasl | |
+ gss | |
+ gst-plugins | [] [] [] [] |
+ gst-plugins-base | [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] [] [] |
+ gtick | () |
+ gtkam | [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] |
+ id-utils | [] [] |
+ impost | |
+ indent | [] [] [] |
+ iso_3166 | [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] |
+ iso_639 | [] [] |
+ jpilot | [] |
+ jtag | |
+ jwhois | |
+ kbd | [] [] [] [] |
+ keytouch | |
+ keytouch-editor | |
+ keytouch-keyboa... | |
+ latrine | () |
+ ld | [] |
+ leafpad | [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | |
+ libiconv | [] [] |
+ libidn | [] [] |
+ lifelines | [] () |
+ lilypond | [] |
+ lingoteach | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | [] |
+ make | [] [] |
+ man-db | [] () [] [] |
+ minicom | [] [] [] |
+ mysecretdiary | [] [] |
+ nano | [] [] [] |
+ nano_1_0 | [] () [] [] |
+ opcodes | [] |
+ parted | |
+ pilot-qof | [] |
+ psmisc | [] |
+ pwdutils | |
+ python | |
+ qof | |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] |
+ sh-utils | [] [] |
+ shared-mime-info | [] [] [] [] |
+ sharutils | [] [] [] [] [] [] |
+ shishi | |
+ silky | |
+ skencil | [] () |
+ sketch | [] () |
+ solfege | |
+ soundtracker | [] [] |
+ sp | [] |
+ stardict | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] |
+ texinfo | [] [] [] |
+ textutils | [] [] [] |
+ tin | () () |
+ tp-robot | [] |
+ tuxpaint | [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ vorbis-tools | [] [] [] [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] |
+ wget | [] [] |
+ xchat | [] [] [] [] [] [] |
+ xkeyboard-config | |
+ xpad | [] [] |
+ +----------------------------------------------------+
+ af am ar az be bg bs ca cs cy da de el en en_GB eo
+ 10 0 1 2 9 22 1 42 41 2 60 95 16 1 17 16
+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ +--------------------------------------------------+
+ GNUnet | |
+ a2ps | [] [] [] () |
+ aegis | |
+ ant-phone | [] |
+ anubis | [] |
+ ap-utils | [] [] |
+ aspell | [] [] [] |
+ bash | [] [] [] |
+ batchelor | [] [] |
+ bfd | [] |
+ bibshelf | [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ console-tools | |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] [] |
+ cryptonit | [] |
+ darkstat | [] () [] [] [] |
+ dialog | [] [] [] [] [] [] [] [] |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ error | [] [] [] [] [] |
+ fetchmail | [] |
+ fileutils | [] [] [] [] [] [] |
+ findutils | [] [] [] [] |
+ flex | [] [] [] |
+ fslint | [] |
+ gas | [] [] |
+ gawk | [] [] [] [] |
+ gbiff | [] |
+ gcal | [] [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gimp-print | [] [] |
+ gip | [] [] [] |
+ gliv | () |
+ glunarclock | [] [] [] |
+ gmult | [] [] [] |
+ gnubiff | () () |
+ gnucash | () () () |
+ gnucash-glossary | [] [] |
+ gnuedu | [] |
+ gnulib | [] [] [] [] [] [] [] [] |
+ gnunet-gtk | |
+ gnutls | |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] [] [] [] |
+ gpe-filemanager | [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | () () [] () |
+ gramadoir | [] [] |
+ grep | [] [] [] [] [] [] [] [] [] [] [] [] |
+ gretl | [] [] [] |
+ gsasl | [] [] |
+ gss | [] |
+ gst-plugins | [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] [] |
+ gstreamer | [] [] [] |
+ gtick | [] |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] [] [] |
+ impost | [] [] |
+ indent | [] [] [] [] [] [] [] [] [] [] |
+ iso_3166 | [] [] [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] [] |
+ iso_639 | [] [] [] [] [] |
+ jpilot | [] [] |
+ jtag | [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | [] [] [] |
+ ld | [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] [] [] |
+ libgpg-error | |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | [] [] |
+ libiconv | [] [] |
+ libidn | [] [] |
+ lifelines | () |
+ lilypond | [] |
+ lingoteach | [] [] [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] |
+ man-db | () |
+ minicom | [] [] [] [] |
+ mysecretdiary | [] [] [] |
+ nano | [] [] [] [] [] [] |
+ nano_1_0 | [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] [] |
+ pilot-qof | |
+ psmisc | [] [] [] |
+ pwdutils | |
+ python | |
+ qof | [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] [] [] [] |
+ sh-utils | [] [] [] [] [] [] [] |
+ shared-mime-info | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] [] |
+ shishi | |
+ silky | [] |
+ skencil | [] [] |
+ sketch | [] [] |
+ solfege | [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ stardict | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] [] [] [] |
+ texinfo | [] [] |
+ textutils | [] [] [] [] [] |
+ tin | [] () |
+ tp-robot | [] [] [] [] |
+ tuxpaint | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux | [] [] [] [] [] [] [] |
+ vorbis-tools | [] [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ 88 22 14 2 40 115 61 14 1 8 1 6 59 31 0 52
+
+ ja ko ku ky lg lt lv mk mn ms mt nb ne nl nn no
+ +-------------------------------------------------+
+ GNUnet | |
+ a2ps | () [] [] () |
+ aegis | () |
+ ant-phone | [] |
+ anubis | [] [] [] |
+ ap-utils | [] |
+ aspell | [] [] |
+ bash | [] |
+ batchelor | [] [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] |
+ bluez-pin | [] [] [] |
+ cflow | |
+ clisp | [] |
+ console-tools | |
+ coreutils | [] |
+ cpio | |
+ cpplib | [] |
+ cryptonit | [] |
+ darkstat | [] [] |
+ dialog | [] [] |
+ diffutils | [] [] [] |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ error | [] |
+ fetchmail | [] [] |
+ fileutils | [] [] |
+ findutils | [] |
+ flex | [] [] |
+ fslint | [] [] |
+ gas | |
+ gawk | [] [] |
+ gbiff | [] |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] |
+ gettext-runtime | [] [] [] |
+ gettext-tools | [] [] |
+ gimp-print | [] [] |
+ gip | [] [] |
+ gliv | [] |
+ glunarclock | [] [] |
+ gmult | [] [] |
+ gnubiff | |
+ gnucash | () () |
+ gnucash-glossary | [] |
+ gnuedu | |
+ gnulib | [] [] [] [] |
+ gnunet-gtk | |
+ gnutls | |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] |
+ gprof | |
+ gpsdrive | () () () |
+ gramadoir | () |
+ grep | [] [] [] [] |
+ gretl | |
+ gsasl | [] |
+ gss | |
+ gst-plugins | [] |
+ gst-plugins-base | |
+ gst-plugins-good | [] |
+ gstreamer | [] |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] |
+ gtkspell | [] [] |
+ gutenprint | |
+ hello | [] [] [] [] [] [] |
+ id-utils | [] |
+ impost | |
+ indent | [] [] |
+ iso_3166 | [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] |
+ iso_639 | [] [] |
+ jpilot | () () () |
+ jtag | |
+ jwhois | [] |
+ kbd | [] |
+ keytouch | [] |
+ keytouch-editor | |
+ keytouch-keyboa... | |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] |
+ libc | [] [] [] [] [] |
+ libexif | |
+ libextractor | |
+ libgpewidget | [] |
+ libgpg-error | |
+ libgphoto2 | [] |
+ libgphoto2_port | [] |
+ libgsasl | [] |
+ libiconv | |
+ libidn | [] [] |
+ lifelines | [] |
+ lilypond | |
+ lingoteach | [] |
+ lynx | [] [] |
+ m4 | [] [] |
+ mailutils | |
+ make | [] [] [] |
+ man-db | () |
+ minicom | [] |
+ mysecretdiary | [] |
+ nano | [] [] [] |
+ nano_1_0 | [] [] [] |
+ opcodes | [] |
+ parted | [] [] |
+ pilot-qof | |
+ psmisc | [] [] [] |
+ pwdutils | |
+ python | |
+ qof | |
+ radius | |
+ recode | [] |
+ rpm | [] [] |
+ screem | [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] |
+ sh-utils | [] [] |
+ shared-mime-info | [] [] [] [] [] |
+ sharutils | [] [] |
+ shishi | |
+ silky | [] |
+ skencil | |
+ sketch | |
+ solfege | |
+ soundtracker | |
+ sp | () |
+ stardict | [] [] |
+ system-tools-ba... | [] [] [] [] |
+ tar | [] [] [] |
+ texinfo | [] [] [] |
+ textutils | [] [] [] |
+ tin | |
+ tp-robot | [] |
+ tuxpaint | [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] |
+ vorbis-tools | [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] |
+ xchat | [] [] [] [] |
+ xkeyboard-config | [] |
+ xpad | [] [] [] |
+ +-------------------------------------------------+
+ ja ko ku ky lg lt lv mk mn ms mt nb ne nl nn no
+ 52 24 2 2 1 3 0 2 3 21 0 15 1 97 5 1
+
+ nso or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ +------------------------------------------------------+
+ GNUnet | |
+ a2ps | () [] [] [] [] [] [] |
+ aegis | () () |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ ap-utils | () |
+ aspell | [] [] |
+ bash | [] [] [] |
+ batchelor | [] [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | [] [] |
+ bison | [] [] [] [] [] |
+ bison-runtime | [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] |
+ console-tools | [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] |
+ cryptonit | [] [] |
+ darkstat | [] [] [] [] [] [] |
+ dialog | [] [] [] [] [] [] [] [] [] |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ error | [] [] [] [] |
+ fetchmail | [] [] [] |
+ fileutils | [] [] [] [] [] |
+ findutils | [] [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ fslint | [] [] [] [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gbiff | [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] [] |
+ gimp-print | [] [] |
+ gip | [] [] [] [] |
+ gliv | [] [] [] [] |
+ glunarclock | [] [] [] [] [] [] |
+ gmult | [] [] [] [] |
+ gnubiff | () |
+ gnucash | () [] |
+ gnucash-glossary | [] [] [] |
+ gnuedu | |
+ gnulib | [] [] [] [] [] |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] [] [] [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] [] [] [] |
+ gpe-login | [] [] [] [] [] [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] |
+ gphoto2 | [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] [] [] [] [] |
+ gretl | [] |
+ gsasl | [] [] [] |
+ gss | [] [] [] |
+ gst-plugins | [] [] [] [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] [] [] [] |
+ gstreamer | [] [] [] |
+ gtick | [] |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] [] |
+ impost | [] |
+ indent | [] [] [] [] [] [] |
+ iso_3166 | [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] [] [] |
+ iso_639 | [] [] [] [] |
+ jpilot | |
+ jtag | [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | [] [] |
+ ld | [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | [] [] |
+ libgpewidget | [] [] [] [] [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] |
+ libiconv | [] [] |
+ libidn | [] [] () |
+ lifelines | [] [] |
+ lilypond | |
+ lingoteach | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailutils | [] [] [] [] |
+ make | [] [] [] [] |
+ man-db | [] [] |
+ minicom | [] [] [] [] [] |
+ mysecretdiary | [] [] [] [] |
+ nano | [] [] [] |
+ nano_1_0 | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] |
+ pilot-qof | [] |
+ psmisc | [] [] |
+ pwdutils | [] [] |
+ python | |
+ qof | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] |
+ rpm | [] [] [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ sh-utils | [] [] [] |
+ shared-mime-info | [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ silky | [] |
+ skencil | [] [] [] |
+ sketch | [] [] [] |
+ solfege | [] |
+ soundtracker | [] [] |
+ sp | |
+ stardict | [] [] [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ textutils | [] [] [] |
+ tin | () |
+ tp-robot | [] |
+ tuxpaint | [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ vorbis-tools | [] [] |
+ wastesedge | |
+ wdiff | [] [] [] [] [] [] |
+ wget | [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] |
+ xpad | [] [] [] |
+ +------------------------------------------------------+
+ nso or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ 0 2 3 58 30 54 5 73 72 4 40 46 11 50 128 2
+
+ tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ +---------------------------------------------------+
+ GNUnet | [] | 2
+ a2ps | [] [] [] | 19
+ aegis | | 0
+ ant-phone | [] [] | 6
+ anubis | [] [] [] | 11
+ ap-utils | () [] | 4
+ aspell | [] [] [] | 15
+ bash | [] | 11
+ batchelor | [] [] | 9
+ bfd | | 1
+ bibshelf | [] | 7
+ binutils | [] [] [] | 9
+ bison | [] [] [] | 19
+ bison-runtime | [] [] [] | 15
+ bluez-pin | [] [] [] [] [] [] | 28
+ cflow | [] [] | 5
+ clisp | | 6
+ console-tools | [] [] | 5
+ coreutils | [] [] | 16
+ cpio | [] [] [] | 9
+ cpplib | [] [] [] [] | 11
+ cryptonit | | 5
+ darkstat | [] () () | 15
+ dialog | [] [] [] [] [] | 30
+ diffutils | [] [] [] [] | 28
+ doodle | [] | 6
+ e2fsprogs | [] [] | 10
+ enscript | [] [] [] | 16
+ error | [] [] [] [] | 18
+ fetchmail | [] [] | 12
+ fileutils | [] [] [] | 18
+ findutils | [] [] [] | 17
+ flex | [] [] | 15
+ fslint | [] | 9
+ gas | [] | 3
+ gawk | [] [] | 15
+ gbiff | [] | 5
+ gcal | [] | 5
+ gcc | [] [] [] | 6
+ gettext-examples | [] [] [] [] [] [] | 27
+ gettext-runtime | [] [] [] [] [] [] | 28
+ gettext-tools | [] [] [] [] [] | 19
+ gimp-print | [] [] | 12
+ gip | [] [] | 12
+ gliv | [] [] | 8
+ glunarclock | [] [] [] | 15
+ gmult | [] [] [] [] | 15
+ gnubiff | [] | 1
+ gnucash | () | 2
+ gnucash-glossary | [] [] | 9
+ gnuedu | [] | 2
+ gnulib | [] [] [] [] [] | 28
+ gnunet-gtk | | 1
+ gnutls | | 2
+ gpe-aerial | [] [] | 14
+ gpe-beam | [] [] | 14
+ gpe-calendar | [] | 3
+ gpe-clock | [] [] [] [] | 21
+ gpe-conf | [] [] | 14
+ gpe-contacts | [] [] | 10
+ gpe-edit | [] [] [] [] | 20
+ gpe-filemanager | [] | 6
+ gpe-go | [] [] | 15
+ gpe-login | [] [] [] [] [] | 21
+ gpe-ownerinfo | [] [] [] [] | 21
+ gpe-package | [] | 6
+ gpe-sketchbook | [] [] | 16
+ gpe-su | [] [] [] | 20
+ gpe-taskmanager | [] [] [] | 20
+ gpe-timesheet | [] [] [] [] | 18
+ gpe-today | [] [] [] [] [] | 21
+ gpe-todo | [] | 7
+ gphoto2 | [] [] [] [] | 20
+ gprof | [] [] | 11
+ gpsdrive | | 4
+ gramadoir | [] | 7
+ grep | [] [] [] [] | 34
+ gretl | | 4
+ gsasl | [] [] | 8
+ gss | [] | 5
+ gst-plugins | [] [] [] | 15
+ gst-plugins-base | [] [] [] | 9
+ gst-plugins-good | [] [] [] [] [] | 20
+ gstreamer | [] [] [] | 17
+ gtick | [] | 3
+ gtkam | [] | 13
+ gtkorphan | [] | 7
+ gtkspell | [] [] [] [] [] [] | 26
+ gutenprint | | 3
+ hello | [] [] [] [] [] | 37
+ id-utils | [] [] | 14
+ impost | [] | 4
+ indent | [] [] [] [] | 25
+ iso_3166 | [] [] [] [] | 16
+ iso_3166_2 | | 2
+ iso_4217 | [] [] | 14
+ iso_639 | [] | 14
+ jpilot | [] [] [] [] | 7
+ jtag | [] | 3
+ jwhois | [] [] [] | 13
+ kbd | [] [] | 12
+ keytouch | [] | 4
+ keytouch-editor | | 2
+ keytouch-keyboa... | [] | 3
+ latrine | [] [] | 8
+ ld | [] [] [] [] | 8
+ leafpad | [] [] [] [] | 23
+ libc | [] [] [] | 23
+ libexif | [] | 4
+ libextractor | [] | 5
+ libgpewidget | [] [] [] | 19
+ libgpg-error | [] | 4
+ libgphoto2 | [] | 8
+ libgphoto2_port | [] [] [] | 11
+ libgsasl | [] | 8
+ libiconv | [] | 7
+ libidn | [] [] | 10
+ lifelines | | 4
+ lilypond | | 2
+ lingoteach | [] | 6
+ lynx | [] [] [] | 15
+ m4 | [] [] [] | 18
+ mailutils | [] | 8
+ make | [] [] [] | 20
+ man-db | [] | 6
+ minicom | [] | 14
+ mysecretdiary | [] [] | 12
+ nano | [] [] | 17
+ nano_1_0 | [] [] [] | 18
+ opcodes | [] [] | 10
+ parted | [] [] [] | 10
+ pilot-qof | [] | 3
+ psmisc | [] | 10
+ pwdutils | [] | 3
+ python | | 0
+ qof | [] | 4
+ radius | [] | 6
+ recode | [] [] [] | 25
+ rpm | [] [] [] [] | 14
+ screem | [] | 2
+ scrollkeeper | [] [] [] [] | 26
+ sed | [] [] [] | 22
+ sh-utils | [] | 15
+ shared-mime-info | [] [] [] [] | 24
+ sharutils | [] [] [] | 23
+ shishi | | 1
+ silky | [] | 4
+ skencil | [] | 7
+ sketch | | 6
+ solfege | | 2
+ soundtracker | [] [] | 9
+ sp | [] | 3
+ stardict | [] [] [] [] | 11
+ system-tools-ba... | [] [] [] [] [] [] [] | 37
+ tar | [] [] [] [] | 20
+ texinfo | [] [] [] | 15
+ textutils | [] [] [] | 17
+ tin | | 1
+ tp-robot | [] [] [] | 10
+ tuxpaint | [] [] [] | 16
+ unicode-han-tra... | | 0
+ unicode-transla... | | 2
+ util-linux | [] [] [] | 20
+ vorbis-tools | [] [] | 11
+ wastesedge | | 1
+ wdiff | [] [] | 22
+ wget | [] [] [] | 19
+ xchat | [] [] [] [] | 29
+ xkeyboard-config | [] [] [] [] | 11
+ xpad | [] [] [] | 14
+ +---------------------------------------------------+
+ 77 teams tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ 170 domains 0 1 1 77 39 0 136 10 1 48 5 54 0 2028
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If October 2006 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
+
+1.6 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`translation iro umontreal ca' to make the `.pot' files available to
+the translation teams.
+
Modified: trunk/Makefile.am
==============================================================================
--- trunk/Makefile.am (original)
+++ trunk/Makefile.am Wed Jan 16 13:54:22 2008
@@ -4,6 +4,7 @@
DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc
TESTS_ENVIRONMENT = $(top_srcdir)/tests/test-runner.sh
+ACLOCAL_AMFLAGS = -I m4
# ============================
# -- DIRECTORY DECLARATIONS --
@@ -68,6 +69,8 @@
$(srcdir)/libepc/service-type.h \
$(srcdir)/libepc/shell.h \
$(srcdir)/libepc/tls.h
+noinst_HEADERS = \
+ $(srcdir)/libepc/i18n.h
libepc_include_HEADERS = \
$(libepc_headers) \
libepc/enums.h \
@@ -78,7 +81,7 @@
pkgconfig_DATA = \
libepc-1.0.pc \
libepc-ui-1.0.pc
-EXTRA_DIST = \
+EXTRA_DIST = config.rpath \
$(srcdir)/gtk-doc.make \
$(gtkdoc_srcdir)/libepc-1.0-docs.xml \
$(gtkdoc_srcdir)/libepc-1.0-sections.txt \
@@ -97,6 +100,7 @@
libepc/enums.c \
libepc/enums.c.in \
libepc/enums.h.in \
+ libepc/i18n.c \
libepc/marshal.c \
libepc/marshal.list \
libepc/protocol.c \
@@ -122,7 +126,8 @@
-Wall \
-DG_DISABLE_DEPRECATED=1 \
-DGDK_DISABLE_DEPRECATED=1 \
- -DGTK_DISABLE_DEPRECATED=1
+ -DGTK_DISABLE_DEPRECATED=1 \
+ -DLOCALEDIR=\"$(localedir)\"
libepc_libepc_1_0_la_CFLAGS = $(AM_CFLAGS) $(LIBEPC_CFLAGS) -DGETTEXT_PACKAGE=\"libepc\" -DG_LOG_DOMAIN=\"libepc\"
libepc_libepc_1_0_la_LDFLAGS = $(LIBEPC_LIBS) -version-info $(LT_VERSION_INFO)
@@ -237,6 +242,7 @@
dist-hook
.PHONY: docs
+SUBDIRS = po
# =====================
# -- LOCAL OVERRIDES --
Added: trunk/config.rpath
==============================================================================
--- (empty file)
+++ trunk/config.rpath Wed Jan 16 13:54:22 2008
@@ -0,0 +1,614 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2006 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <gord gnu ai mit edu>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ darwin*)
+ case $cc_basename in
+ xlc*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ mingw* | pw32* | os2*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux*)
+ case $cc_basename in
+ icc* | ecc*)
+ wl='-Wl,'
+ ;;
+ pgcc | pgf77 | pgf90)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II <kc5tja dolphin openprojects net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we cannot use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ interix3*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if test "$GCC" = yes ; then
+ :
+ else
+ case $cc_basename in
+ xlc*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | kfreebsd*-gnu | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ ;;
+ *)
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ ;;
+ aix4* | aix5*)
+ ;;
+ amigaos*)
+ ;;
+ beos*)
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ shrext=.dll
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ ;;
+ dgux*)
+ ;;
+ freebsd1*)
+ ;;
+ kfreebsd*-gnu)
+ ;;
+ freebsd* | dragonfly*)
+ ;;
+ gnu*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $host_cpu in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ ;;
+ interix3*)
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux*)
+ ;;
+ knetbsd*-gnu)
+ ;;
+ netbsd*)
+ ;;
+ newsos6)
+ ;;
+ nto-qnx*)
+ ;;
+ openbsd*)
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ ;;
+ osf3* | osf4* | osf5*)
+ ;;
+ solaris*)
+ ;;
+ sunos4*)
+ ;;
+ sysv4 | sysv4.3*)
+ ;;
+ sysv4*MP*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ ;;
+ uts4*)
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
Modified: trunk/configure.ac
==============================================================================
--- trunk/configure.ac (original)
+++ trunk/configure.ac Wed Jan 16 13:54:22 2008
@@ -19,7 +19,9 @@
AC_CONFIG_HEADER([config.h])
AC_CONFIG_FILES([
- Makefile docs/reference/libepc/Makefile
+ Makefile
+ po/Makefile.in
+ docs/reference/libepc/Makefile
libepc-1.0.pc libepc-ui-1.0.pc
])
@@ -27,6 +29,7 @@
AM_PROG_CC_C_O
AM_PROG_LIBTOOL
+AM_GNU_GETTEXT([external])
GTK_DOC_CHECK([1.4])
PKG_PROG_PKG_CONFIG([0.14])
Modified: trunk/examples/simple-publisher.c
==============================================================================
--- trunk/examples/simple-publisher.c (original)
+++ trunk/examples/simple-publisher.c Wed Jan 16 13:54:22 2008
@@ -105,6 +105,7 @@
/* Initialize the toolkit. */
+ setlocale (LC_ALL, "");
g_thread_init (NULL);
g_type_init ();
Modified: trunk/libepc-ui/password-dialog.c
==============================================================================
--- trunk/libepc-ui/password-dialog.c (original)
+++ trunk/libepc-ui/password-dialog.c Wed Jan 16 13:54:22 2008
@@ -18,8 +18,10 @@
* Authors:
* Mathias Hasselmann
*/
+
#include "password-dialog.h"
-#include <glib/gi18n-lib.h>
+#include "libepc/i18n.h"
+
#include <gtk/gtk.h>
/**
Modified: trunk/libepc-ui/progress-window.c
==============================================================================
--- trunk/libepc-ui/progress-window.c (original)
+++ trunk/libepc-ui/progress-window.c Wed Jan 16 13:54:22 2008
@@ -18,10 +18,11 @@
* Authors:
* Mathias Hasselmann
*/
+
#include "progress-window.h"
+#include "libepc/i18n.h"
#include <libepc/shell.h>
-#include <glib/gi18n-lib.h>
#include <gtk/gtk.h>
#include <string.h>
Modified: trunk/libepc/consumer.c
==============================================================================
--- trunk/libepc/consumer.c (original)
+++ trunk/libepc/consumer.c Wed Jan 16 13:54:22 2008
@@ -22,11 +22,11 @@
#include "libepc/consumer.h"
#include "libepc/enums.h"
+#include "libepc/i18n.h"
#include "libepc/marshal.h"
#include "libepc/service-monitor.h"
#include "libepc/shell.h"
-#include <glib/gi18n-lib.h>
#include <libsoup/soup.h>
#include <string.h>
@@ -1018,7 +1018,7 @@
else
g_set_error (error, G_MARKUP_ERROR,
G_MARKUP_ERROR_INVALID_CONTENT,
- _("Unexpected element: `%s'"),
+ _("Unexpected element: '%s'"),
element_name);
}
Added: trunk/libepc/i18n.c
==============================================================================
--- (empty file)
+++ trunk/libepc/i18n.c Wed Jan 16 13:54:22 2008
@@ -0,0 +1,42 @@
+/* Easy Publish and Consume Library
+ * Copyright (C) 2007, 2008 Openismus GmbH
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Authors:
+ * Mathias Hasselmann
+ */
+
+#include "libepc/i18n.h"
+#include <libintl.h>
+
+#ifdef ENABLE_NLS
+
+gchar*
+epc_gettext (gchar *msgid)
+{
+ static gboolean uninitialized = TRUE;
+
+ if (G_UNLIKELY (uninitialized))
+ {
+ bindtextdomain (GETTEXT_PACKAGE, LOCALEDIR);
+ bind_textdomain_codeset (GETTEXT_PACKAGE, "UTF-8");
+ uninitialized = FALSE;
+ }
+
+ return dgettext (GETTEXT_PACKAGE, msgid);
+}
+
+#endif /* ENABLE_NLS */
Added: trunk/libepc/i18n.h
==============================================================================
--- (empty file)
+++ trunk/libepc/i18n.h Wed Jan 16 13:54:22 2008
@@ -0,0 +1,44 @@
+/* Easy Publish and Consume Library
+ * Copyright (C) 2007, 2008 Openismus GmbH
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Authors:
+ * Mathias Hasselmann
+ */
+
+#ifndef __EPC_I18N_H__
+#define __EPC_I18N_H__
+
+#include "config.h"
+#include <glib.h>
+
+G_BEGIN_DECLS
+
+#ifdef ENABLE_NLS
+
+#define _(MsgId) epc_gettext((MsgId))
+
+gchar* epc_gettext (gchar *msgid);
+
+#else /* ENABLE_NLS */
+
+#define _(MsgId) (MsgId)
+
+#endif /* ENABLE_NLS */
+
+G_END_DECLS
+
+#endif /* __EPC_I18N_H__ */
Modified: trunk/libepc/publisher.c
==============================================================================
--- trunk/libepc/publisher.c (original)
+++ trunk/libepc/publisher.c Wed Jan 16 13:54:22 2008
@@ -22,11 +22,11 @@
#include "libepc/publisher.h"
#include "libepc/dispatcher.h"
#include "libepc/enums.h"
+#include "libepc/i18n.h"
#include "libepc/shell.h"
#include "libepc/tls.h"
#include <glibconfig.h>
-#include <glib/gi18n-lib.h>
#include <libsoup/soup.h>
#include <libsoup/soup-address.h>
#include <libsoup/soup-server.h>
Modified: trunk/libepc/shell.c
==============================================================================
--- trunk/libepc/shell.c (original)
+++ trunk/libepc/shell.c Wed Jan 16 13:54:22 2008
@@ -19,13 +19,13 @@
* Mathias Hasselmann
*/
#include "libepc/shell.h"
+#include "libepc/i18n.h"
#include <avahi-common/error.h>
#include <avahi-glib/glib-malloc.h>
#include <avahi-glib/glib-watch.h>
#include <glib-object.h>
-#include <glib/gi18n-lib.h>
#include <gmodule.h>
#include <gnutls/gnutls.h>
@@ -452,7 +452,7 @@
title = *context;
if (NULL == title)
- title = _("Progress Changed");
+ title = _("Operation Proceeded");
if (NULL == message)
message = _("No details known");
Modified: trunk/libepc/tls.c
==============================================================================
--- trunk/libepc/tls.c (original)
+++ trunk/libepc/tls.c Wed Jan 16 13:54:22 2008
@@ -19,6 +19,7 @@
* Mathias Hasselmann
*/
#include "libepc/tls.h"
+#include "libepc/i18n.h"
#include "libepc/shell.h"
#include <sys/types.h>
@@ -28,7 +29,6 @@
#include <string.h>
#include <unistd.h>
-#include <glib/gi18n-lib.h>
#include <glib/gstdio.h>
#include <uuid/uuid.h>
Added: trunk/m4/gettext.m4
==============================================================================
--- (empty file)
+++ trunk/m4/gettext.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,419 @@
+# gettext.m4 serial 59 (gettext-0.16.1)
+dnl Copyright (C) 1995-2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1995-2000.
+dnl Bruno Haible <haible clisp cons org>, 2000-2006.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define([gt_included_intl],
+ ifelse([$1], [external],
+ ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
+ [yes]))
+ define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+ gt_NEEDS_INIT
+ AM_GNU_GETTEXT_NEED([$2])
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
+ gt_INTL_MACOSX
+
+ dnl Set USE_NLS.
+ AC_REQUIRE([AM_NLS])
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl Add a version number to the cache macros.
+ case " $gt_needs " in
+ *" need-formatstring-macros "*) gt_api_version=3 ;;
+ *" need-ngettext "*) gt_api_version=2 ;;
+ *) gt_api_version=1 ;;
+ esac
+ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ if test $gt_api_version -ge 3; then
+ gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+ else
+ gt_revision_test_code=
+ fi
+ if test $gt_api_version -ge 2; then
+ gt_expression_test_code=' + * ngettext ("", "", 0)'
+ else
+ gt_expression_test_code=
+ fi
+
+ AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+ [AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings],
+ [eval "$gt_func_gnugettext_libc=yes"],
+ [eval "$gt_func_gnugettext_libc=no"])])
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ [$gt_func_gnugettext_libintl],
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ [eval "$gt_func_gnugettext_libintl=yes"],
+ [eval "$gt_func_gnugettext_libintl=no"])
+ dnl Now see whether libintl exists and depends on libiconv.
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ eval "$gt_func_gnugettext_libintl=yes"
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ CATOBJEXT=
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Some extra flags are needed during linking.
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ AC_MSG_CHECKING([whether to use NLS])
+ AC_MSG_RESULT([$USE_NLS])
+ if test "$USE_NLS" = "yes"; then
+ AC_MSG_CHECKING([where the gettext function comes from])
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ AC_MSG_RESULT([$gt_source])
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE(HAVE_DCGETTEXT, 1,
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATOBJEXT)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST(INSTOBJEXT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST(GENCAT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLOBJS=
+ if test "$USE_INCLUDED_LIBINTL" = yes; then
+ INTLOBJS="\$(GETTOBJS)"
+ fi
+ AC_SUBST(INTLOBJS)
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST(INTLLIBS)
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST(LIBINTL)
+ AC_SUBST(LTLIBINTL)
+ AC_SUBST(POSUB)
+])
+
+
+dnl Checks for special options needed on MacOS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+ dnl Check for API introduced in MacOS X 10.2.
+ AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+ gt_cv_func_CFPreferencesCopyAppValue,
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_TRY_LINK([#include <CoreFoundation/CFPreferences.h>],
+ [CFPreferencesCopyAppValue(NULL, NULL)],
+ [gt_cv_func_CFPreferencesCopyAppValue=yes],
+ [gt_cv_func_CFPreferencesCopyAppValue=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+ AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], 1,
+ [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+ fi
+ dnl Check for API introduced in MacOS X 10.3.
+ AC_CACHE_CHECK([for CFLocaleCopyCurrent], gt_cv_func_CFLocaleCopyCurrent,
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_TRY_LINK([#include <CoreFoundation/CFLocale.h>], [CFLocaleCopyCurrent();],
+ [gt_cv_func_CFLocaleCopyCurrent=yes],
+ [gt_cv_func_CFLocaleCopyCurrent=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], 1,
+ [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+ AC_SUBST([INTL_MACOSX_LIBS])
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+ m4_divert_text([DEFAULTS], [gt_needs=])
+ m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
Added: trunk/m4/iconv.m4
==============================================================================
--- (empty file)
+++ trunk/m4/iconv.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,101 @@
+# iconv.m4 serial AM4 (gettext-0.11.3)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST(LIBICONV)
+ AC_SUBST(LTLIBICONV)
+])
+
+AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+])
Added: trunk/m4/lib-ld.m4
==============================================================================
--- (empty file)
+++ trunk/m4/lib-ld.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,110 @@
+# lib-ld.m4 serial 3 (gettext-0.13)
+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
Added: trunk/m4/lib-link.m4
==============================================================================
--- (empty file)
+++ trunk/m4/lib-link.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,644 @@
+# lib-link.m4 serial 9 (gettext-0.16)
+dnl Copyright (C) 2001-2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ(2.50)
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIB[]NAME"
+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" \
+ && { test -f "$additional_libdir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
+ found_dir="$additional_libdir"
+ if test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_so="$additional_libdir/lib$name.$shlibext"
+ else
+ found_so="$additional_libdir/lib$name.dll.a"
+ fi
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" \
+ && { test -f "$dir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$dir/lib$name.dll.a"; }; }; then
+ found_dir="$dir"
+ if test -f "$dir/lib$name.$shlibext"; then
+ found_so="$dir/lib$name.$shlibext"
+ else
+ found_so="$dir/lib$name.dll.a"
+ fi
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+ AC_REQUIRE([AC_LIB_RPATH])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ $1=
+ if test "$enable_rpath" != no; then
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode directories into the resulting
+ dnl binary.
+ rpathdirs=
+ next=
+ for opt in $2; do
+ if test -n "$next"; then
+ dir="$next"
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next=
+ else
+ case $opt in
+ -L) next=yes ;;
+ -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next= ;;
+ *) next= ;;
+ esac
+ fi
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n ""$3""; then
+ dnl libtool is used for linking. Use -R options.
+ for dir in $rpathdirs; do
+ $1="${$1}${$1:+ }-R$dir"
+ done
+ else
+ dnl The linker is used for linking directly.
+ if test -n "$hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user
+ dnl must pass all path elements in one option.
+ alldirs=
+ for dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="${$1}${$1:+ }$flag"
+ done
+ fi
+ fi
+ fi
+ fi
+ fi
+ AC_SUBST([$1])
+])
Added: trunk/m4/lib-prefix.m4
==============================================================================
--- (empty file)
+++ trunk/m4/lib-prefix.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,185 @@
+# lib-prefix.m4 serial 5 (gettext-0.15)
+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates a variable acl_libdirstem, containing
+dnl the basename of the libdir, either "lib" or "lib64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+ dnl There is no formal standard regarding lib and lib64. The current
+ dnl practice is that on a system supporting 32-bit and 64-bit instruction
+ dnl sets or ABIs, 64-bit libraries go under $prefix/lib64 and 32-bit
+ dnl libraries go under $prefix/lib. We determine the compiler's default
+ dnl mode by looking at the compiler's library search path. If at least
+ dnl of its elements ends in /lib64 or points to a directory whose absolute
+ dnl pathname ends in /lib64, we assume a 64-bit ABI. Otherwise we use the
+ dnl default, namely "lib".
+ acl_libdirstem=lib
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_IFS"
+ fi
+])
Added: trunk/m4/nls.m4
==============================================================================
--- (empty file)
+++ trunk/m4/nls.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,31 @@
+# nls.m4 serial 3 (gettext-0.15)
+dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1995-2000.
+dnl Bruno Haible <haible clisp cons org>, 2000-2003.
+
+AC_PREREQ(2.50)
+
+AC_DEFUN([AM_NLS],
+[
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+])
Added: trunk/m4/po.m4
==============================================================================
--- (empty file)
+++ trunk/m4/po.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,428 @@
+# po.m4 serial 13 (gettext-0.15)
+dnl Copyright (C) 1995-2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1995-2000.
+dnl Bruno Haible <haible clisp cons org>, 2000-2003.
+
+AC_PREREQ(2.50)
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
+ AC_REQUIRE([AM_NLS])dnl
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([GMSGFMT_015])
+
+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([XGETTEXT_015])
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+ dnl Installation directories.
+ dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
+ dnl have to define it here, so that it can be used in po/Makefile.
+ test -n "$localedir" || localedir='${datadir}/locale'
+ AC_SUBST([localedir])
+
+ AC_CONFIG_COMMANDS([po-directories], [[
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done]],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+ # When this code is run, in config.status, two variables have already been
+ # set:
+ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+ # - LINGUAS is the value of the environment variable LINGUAS at configure
+ # time.
+
+changequote(,)dnl
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ # Find a way to echo strings without interpreting backslash.
+ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='echo'
+ else
+ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='printf %s\n'
+ else
+ echo_func () {
+ cat <<EOT
+$*
+EOT
+ }
+ gt_echo='echo_func'
+ fi
+ fi
+
+ # A sed script that extracts the value of VARIABLE from a Makefile.
+ sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^[ ]*VARIABLE[ ]*=/{
+ # Seen the first line of the variable definition.
+ s/^[ ]*VARIABLE[ ]*=//
+ ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+ # Set POTFILES to the value of the Makefile variable POTFILES.
+ sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+ # Compute POTFILES_DEPS as
+ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+ POTFILES_DEPS=
+ for file in $POTFILES; do
+ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+ done
+ POMAKEFILEDEPS=""
+
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+ sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+ ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+ fi
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ # Compute PROPERTIESFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+ # Compute CLASSFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+ # Compute QMFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+ # Compute MSGFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+ # Compute RESOURCESDLLFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ PROPERTIESFILES=
+ CLASSFILES=
+ QMFILES=
+ MSGFILES=
+ RESOURCESDLLFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+ CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+ QMFILES="$QMFILES $srcdirpre$lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ JAVACATALOGS=
+ QTCATALOGS=
+ TCLCATALOGS=
+ CSHARPCATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+ QTCATALOGS="$QTCATALOGS $lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ fi
+
+ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+ @echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+ \$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+ @echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+ \$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if test -n "$POMAKEFILEDEPS"; then
+ cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+ fi
+ mv "$ac_file.tmp" "$ac_file"
+])
Added: trunk/m4/progtest.m4
==============================================================================
--- (empty file)
+++ trunk/m4/progtest.m4 Wed Jan 16 13:54:22 2008
@@ -0,0 +1,92 @@
+# progtest.m4 serial 4 (gettext-0.14.2)
+dnl Copyright (C) 1996-2003, 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper cygnus com>, 1996.
+
+AC_PREREQ(2.50)
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ [[\\/]]* | ?:[[\\/]]*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
Added: trunk/po/.gitignore
==============================================================================
--- (empty file)
+++ trunk/po/.gitignore Wed Jan 16 13:54:22 2008
@@ -0,0 +1,5 @@
+POTFILES
+Makefile
+Makefile.in
+stamp-po
+*.gmo
Added: trunk/po/LINGUAS
==============================================================================
--- (empty file)
+++ trunk/po/LINGUAS Wed Jan 16 13:54:22 2008
@@ -0,0 +1 @@
+de
Added: trunk/po/Makefile.in.in
==============================================================================
--- (empty file)
+++ trunk/po/Makefile.in.in Wed Jan 16 13:54:22 2008
@@ -0,0 +1,403 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2006 by Ulrich Drepper <drepper gnu ai mit edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.16
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SHELL = /bin/sh
+ SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: all- USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+ else \
+ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+ fi; \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address="$$msgid_bugs_address"
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data- USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ $(mkdir_p) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data- USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ $(mkdir_p) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data- USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir) || exit 1; \
+ else \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && $(SHELL) ./config.status $(subdir)/$ in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: trunk/po/Makevars
==============================================================================
--- (empty file)
+++ trunk/po/Makevars Wed Jan 16 13:54:22 2008
@@ -0,0 +1,41 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Openismus GmbH
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = http://bugzilla.gnome.org/enter_bug.cgi?product=libepc
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
Added: trunk/po/POTFILES.in
==============================================================================
--- (empty file)
+++ trunk/po/POTFILES.in Wed Jan 16 13:54:22 2008
@@ -0,0 +1,13 @@
+# List of source files which contain translatable strings.
+libepc/consumer.c
+libepc/contents.c
+libepc/dispatcher.c
+libepc/protocol.c
+libepc/publisher.c
+libepc/service-info.c
+libepc/service-monitor.c
+libepc/service-type.c
+libepc/shell.c
+libepc/tls.c
+libepc-ui/password-dialog.c
+libepc-ui/progress-window.c
Added: trunk/po/Rules-quot
==============================================================================
--- (empty file)
+++ trunk/po/Rules-quot Wed Jan 16 13:54:22 2008
@@ -0,0 +1,47 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en quot header en boldquot header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en quot po-create:
+ $(MAKE) en quot po-update
+en boldquot po-create:
+ $(MAKE) en boldquot po-update
+
+en quot po-update: en quot po-update-en
+en boldquot po-update: en boldquot po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en quot insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en quot header/g' $(srcdir)/insert-header.sin > en quot insert-header
+
+en boldquot insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en boldquot header/g' $(srcdir)/insert-header.sin > en boldquot insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
Added: trunk/po/boldquot.sed
==============================================================================
--- (empty file)
+++ trunk/po/boldquot.sed Wed Jan 16 13:54:22 2008
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/â\1â/g
+s/`\([^`']*\)'/â\1â/g
+s/ '\([^`']*\)' / â\1â /g
+s/ '\([^`']*\)'$/ â\1â/g
+s/^'\([^`']*\)' /â\1â /g
+s/ââ/""/g
+s/â/â[1m/g
+s/â/[0mâ/g
+s/â/â[1m/g
+s/â/[0mâ/g
Added: trunk/po/en boldquot header
==============================================================================
--- (empty file)
+++ trunk/po/en boldquot header Wed Jan 16 13:54:22 2008
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
Added: trunk/po/en quot header
==============================================================================
--- (empty file)
+++ trunk/po/en quot header Wed Jan 16 13:54:22 2008
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
Added: trunk/po/insert-header.sin
==============================================================================
--- (empty file)
+++ trunk/po/insert-header.sin Wed Jan 16 13:54:22 2008
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
Added: trunk/po/libepc.pot
==============================================================================
--- (empty file)
+++ trunk/po/libepc.pot Wed Jan 16 13:54:22 2008
@@ -0,0 +1,129 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Openismus GmbH
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?";
+"product=libepc\n"
+"POT-Creation-Date: 2008-01-16 13:10+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL ADDRESS>\n"
+"Language-Team: LANGUAGE <LL li org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: libepc/consumer.c:1021
+#, c-format
+msgid "Unexpected element: '%s'"
+msgstr ""
+
+#: libepc/publisher.c:570
+msgid "Table of Contents"
+msgstr ""
+
+#: libepc/publisher.c:604
+msgid "Sorry, no resources published yet."
+msgstr ""
+
+#: libepc/publisher.c:2373
+msgid "%a of %u on %h"
+msgstr ""
+
+#: libepc/shell.c:264
+#, c-format
+msgid "Cannot create Avahi client: %s"
+msgstr ""
+
+#: libepc/shell.c:455
+msgid "Operation Proceeded"
+msgstr ""
+
+#: libepc/shell.c:457
+msgid "No details known"
+msgstr ""
+
+#: libepc/tls.c:165
+msgid "Generating Server Key"
+msgstr ""
+
+#: libepc/tls.c:166
+msgid ""
+"This may take some time. Type on the keyboard, move your mouse, or browse "
+"the web to generate some entropy."
+msgstr ""
+
+#: libepc/tls.c:191
+#, c-format
+msgid "Cannot create private server key: %s"
+msgstr ""
+
+#: libepc/tls.c:244
+#, c-format
+msgid "Cannot import private server key '%s': %s"
+msgstr ""
+
+#: libepc/tls.c:300
+#, c-format
+msgid "Cannot export private key to PEM format: %s"
+msgstr ""
+
+#: libepc/tls.c:314
+#, c-format
+msgid "Failed to create private key folder '%s': %s"
+msgstr ""
+
+#: libepc/tls.c:330
+#, c-format
+msgid "Failed to create private key file '%s': %s"
+msgstr ""
+
+#: libepc/tls.c:344
+#, c-format
+msgid "Failed to write private key file '%s': %s"
+msgstr ""
+
+#: libepc/tls.c:416
+#, c-format
+msgid "Cannot create self signed server key for '%s': %s"
+msgstr ""
+
+#: libepc/tls.c:470
+#, c-format
+msgid "Cannot import server certificate '%s': %s"
+msgstr ""
+
+#: libepc/tls.c:525
+#, c-format
+msgid "Cannot export server certificate to PEM format: %s"
+msgstr ""
+
+#: libepc/tls.c:539
+#, c-format
+msgid "Failed to create server certificate folder '%s': %s"
+msgstr ""
+
+#: libepc-ui/password-dialog.c:107
+msgid "_Username:"
+msgstr ""
+
+#: libepc-ui/password-dialog.c:112
+msgid "_Password:"
+msgstr ""
+
+#: libepc-ui/password-dialog.c:117
+msgid "Anonymous Authentication"
+msgstr ""
+
+#: libepc-ui/password-dialog.c:187
+#, c-format
+msgid "Authentication required for <b>%s</b>."
+msgstr ""
+
+#: libepc-ui/password-dialog.c:189
+msgid "Authentication required."
+msgstr ""
Added: trunk/po/quot.sed
==============================================================================
--- (empty file)
+++ trunk/po/quot.sed Wed Jan 16 13:54:22 2008
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/â\1â/g
+s/`\([^`']*\)'/â\1â/g
+s/ '\([^`']*\)' / â\1â /g
+s/ '\([^`']*\)'$/ â\1â/g
+s/^'\([^`']*\)' /â\1â /g
+s/ââ/""/g
Added: trunk/po/remove-potcdate.sin
==============================================================================
--- (empty file)
+++ trunk/po/remove-potcdate.sin Wed Jan 16 13:54:22 2008
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
