[Notes] [Git][BuildStream/buildstream][tpollard/566] 44 commits: Add --remote, -r option to bst build, inline with pull & push

[Tom Pollard <gitlab mg gitlab com>]

Title: GitLab

Tom Pollard pushed to branch tpollard/566 at BuildStream / buildstream

Commits:

• cd8e5e27
  by Tom Pollard at 2019-02-05T11:22:01Z

  Add --remote, -r option to bst build, inline with pull & push
  
  Providing a remote will limit build's pull/push remote actions to
  the given remote specifically, ignoring those defined via user or
  project configuration.
  

• a46650d0
  by Tom Pollard at 2019-02-05T12:41:30Z

  Merge branch 'tpollard/buildremote' into 'master'
  
  Add --remote, -r option to bst build, inline with pull & push
  
  See merge request BuildStream/buildstream!1119

• 9c94e8e5
  by Daniel Silverstone at 2019-02-05T13:15:24Z

  requirements: Add roaringbitmap to the requirements
  
  In order to support use of roaring bitmaps in the loader, we need to
  depend on it here.
  
  Signed-off-by: Daniel Silverstone <daniel silverstone codethink co uk>
  

• 7682ef49
  by Daniel Silverstone at 2019-02-05T13:15:24Z

  loadelement.py: Use roaring bitmaps in dep cache
  
  The dependency cache in LoadElement causes the peak RAM consumption of
  the loader to be exceedingly large, upwards of 25GB for a test of a
  Debian stack.  By switching from the old dict cache to a roaring bitmap
  based cache, we reduce the cost of the loader cache in RAM terms to
  around 5.5GB for the same stack, which makes it plausible for the short
  term.
  
  Signed-off-by: Daniel Silverstone <daniel silverstone codethink co uk>
  

• 0e471144
  by Benjamin Schubert at 2019-02-05T15:45:37Z

  Merge branch 'danielsilverstone-ct/roaring-bitmaps' into 'master'
  
  Switch to roaring bitmaps for the loader dependency caches
  
  See merge request BuildStream/buildstream!1128

• f17ea6a6
  by Jonathan Maw at 2019-02-06T10:32:05Z

  gitlab-ci: Add commands to be run by WSL runners
  

• d4d2f897
  by Jonathan Maw at 2019-02-06T10:45:34Z

  tests: Skip tests that use sandboxes on WSL
  

• f4c8a0ec
  by Jonathan Maw at 2019-02-06T10:45:34Z

  tests: Fix test failures caused by unix sockets' path length limit
  
  The unix specification for unix sockets only allocates ~100 characters
  for the length of the path. This may be longer than the path for a CI
  runner, or the path to a user's buildstream directory.
  

• 256bcde5
  by Jonathan Maw at 2019-02-06T15:29:18Z

  Merge branch 'jonathan/wsl-tests' into 'master'
  
  Add pre-merge tests that use a WSL runner
  
  Closes #852
  
  See merge request BuildStream/buildstream!1108

• 335ef2b8
  by Daniel Silverstone at 2019-02-06T17:30:13Z

  loadelement.py: Switch from roaringbitmap to pyroaring
  
  The licence for roaringbitmap was not compatible.  pyroaring is
  a similar project which is MIT licensed and is slightly better on
  memory too.
  
  Signed-off-by: Daniel Silverstone <daniel silverstone codethink co uk>
  

• 8f90be91
  by Benjamin Schubert at 2019-02-06T18:36:17Z

  Update testing images to include c++ compiler
  

• 1a75b252
  by Benjamin Schubert at 2019-02-06T19:34:09Z

  Merge branch 'danielsilverstone-ct/other-roaring' into 'master'
  
  loadelement.py: Switch from roaringbitmap to pyroaring
  
  Closes #899
  
  See merge request BuildStream/buildstream!1133

• 7285e87e
  by William Salmon at 2019-02-07T09:42:36Z

  Add more log formatting options
  
  The 'wallclock-us' is a option that we thought we already had.
  

• e61f4713
  by Will Salmon at 2019-02-07T10:58:54Z

  Merge branch 'willsalmon/log_formating' into 'master'
  
  Add more log formatting options
  
  See merge request BuildStream/buildstream!1125

• b4d4c4f5
  by Phil Dawson at 2019-02-08T14:27:54Z

  Expose basic api for testing external plugins.
  
  We want external plugins to be able to make use of the core testing utils.
  This commit exposes the basic utilities which are currently in use in
  bst-external plugins. If necessary, more utilities could be exposed in the
  future.
  
  Moves the following files from tests/testutils/ to
  buildstream/plugintestingutils/:
  o runcli.py
  o integration.py
  
  As part of this, this commit makes the following changes to runcli.py
  and integration.py:
  o runcli.py: Fix linting errors
  o runcli.py: Add user facing documentation
  o Integration.py: Add user facing documentation
  

• 77ce0c16
  by Phil Dawson at 2019-02-08T16:28:05Z

  Merge branch 'phil/plugin-testing-api' into 'master'
  
  Expose basic api for testing external plugins.
  
  Closes #847
  
  See merge request BuildStream/buildstream!1075

• 1ee4a4ba
  by Abderrahim Kitouni at 2019-02-08T16:42:23Z

  _artifactcache.py: don't leak the project specific remote caches
  
  the code for initializing remotes added the project specific remote
  caches to the global list instead of making a copy.
  
  Fixes #618
  

• 24c0de16
  by Abderrahim Kitouni at 2019-02-08T16:42:23Z

  _project.py: use artifact caches from the parent project for junctions
  
  This makes a junction use the artifact cache of the parent project
  before the ones defined for the junction
  
  Fixes #401
  

• a937f99a
  by Javier Jardón at 2019-02-08T20:29:05Z

  Merge branch 'abderrahim/artifact-cache-junction' into 'master'
  
  Use artifact cache specs from the parent project before those defined in junctions
  
  Closes #618 and #401
  
  See merge request BuildStream/buildstream!1113

• da1560e4
  by Javier Jardón at 2019-02-09T09:10:01Z

  .gitlab-ci.yml: Remove testing on Fedora 27
  
  Fedora 27 is EOL since 2018-11-30
  
  See https://fedoraproject.org/wiki/End_of_life
  

• 79fbab61
  by Jürg Billeter at 2019-02-09T10:30:20Z

  Merge branch 'jjardon/fedora_27' into 'master'
  
  .gitlab-ci.yml: Remove testing on Fedora 27
  
  See merge request BuildStream/buildstream!1136

• 354c563d
  by Jürg Billeter at 2019-02-10T20:03:46Z

  import.py: Validate config node
  
  Fixes #662.
  

• 5e1be71f
  by Jürg Billeter at 2019-02-11T05:10:56Z

  Merge branch 'juerg/import' into 'master'
  
  import.py: Validate config node
  
  Closes #662
  
  See merge request BuildStream/buildstream!1141

• 99e1be45
  by Jürg Billeter at 2019-02-11T05:12:25Z

  local.py: Do not follow symlinks in local directories
  
  isdir() follows symlinks on the host, resulting in potential host
  contamination. This change reorders the file checks to avoid this issue.
  

• f95e222e
  by Jürg Billeter at 2019-02-11T05:12:25Z

  sandbox/sandbox.py: Do not follow symlinks in _has_command()
  
  This is required to ensure symlinks are not resolved on the host.
  

• 89973fb3
  by Jürg Billeter at 2019-02-11T05:12:25Z

  utils.py: Remove list_dirs parameter from list_relative_paths()
  
  list_dirs was always True in the BuildStream code base. There was also a
  bug in the list_dirs=False code path as it did not return symlinks in
  `dirnames`.
  
  This is an API break, however, there are no known external callers.
  

• d1da3fb0
  by Jürg Billeter at 2019-02-11T05:12:25Z

  utils.py: Fix sorting of symlinks to directories
  
  os.walk() resolves symlinks to check whether they point to a directory
  even when followlinks is set to False. We already work around that
  broken behavior by extracting symlinks from `dirnames`. However, the
  sort order was still incorrect as we returned symlinks in dirnames
  before files and other symlinks. This change fixes this, sorting all
  files and symlinks in a single list.
  

• 7cf67ed3
  by Jürg Billeter at 2019-02-11T05:12:25Z

  _casbaseddirectory.py: Do not mimic os.walk() in list_relative_paths()
  
  This matches the change in utils.list_relative_paths() that now sorts
  all symlinks as files, instead of following the broken behavior of
  os.walk().
  

• 7ec0bb5e
  by Jürg Billeter at 2019-02-11T05:44:20Z

  tests/sources/local.py: Add directory symlink test
  

• c07cc967
  by Jürg Billeter at 2019-02-11T07:13:28Z

  Merge branch 'juerg/symlinks' into 'master'
  
  Symlink fixes
  
  See merge request BuildStream/buildstream!1138

• 9e3d3e05
  by Angelos Evripiotis at 2019-02-11T07:14:50Z

  contributing: snakeviz replaces pyflame+flamegraph
  
  Replace the instructions for pyflame+flamegraph with simpler ones for
  snakeviz. For our general use-case this seems to be easier and better.
  Usage of this tool was demonstrated at the 2019 BuildStream Gathering in
  January by Daniel Silverstone, when presenting the aggregate results of
  profiling on many target environments.
  
  Here is the relevant mailing list thread:
  
  "Profiling before the gathering"
  https://mail.gnome.org/archives/buildstream-list/2019-January/msg00057.html
  

• bb6a692d
  by Jürg Billeter at 2019-02-11T09:20:34Z

  Merge branch 'snakeviz' into 'master'
  
  contributing: snakeviz replaces pyflame+flamegraph
  
  See merge request BuildStream/buildstream!1129

• 1ed63e54
  by Angelos Evripiotis at 2019-02-11T09:24:48Z

  _includes: better provenance on recursive include
  
  Use the provenance of the include block, instead of the whole node.
  

• 02e48209
  by Angelos Evripiotis at 2019-02-11T09:24:48Z

  _includes: better error on missing include
  
  Previously, a missing include would result in an error like this:
  
      Could not find file at not-a-file.include
  
  Note that the file containing the include was not mentioned.
  
  Now we get an error like this instead:
  
      element.bst [line 7 column 5]: Include block references a file that
      could not be found: 'not-a-file.include'.
  

• 4336e3bf
  by Angelos Evripiotis at 2019-02-11T09:24:48Z

  _includes: better error on including directory
  
  Previously, include a directory result in an error like this:
  
      mydir is a directory. bst command expects a .bst file.
  
  Note that the file containing the include was not mentioned.
  
  Now we get an error like this instead:
  
      element.bst [line 12 column 0]: Include block references a
      directory instead of a file: 'mydir'.
  

• 3f6c5000
  by Angelos Evripiotis at 2019-02-11T09:24:48Z

  _includes: re-use file_path variable
  
  Avoid an unnecessary call to os.path.join().
  

• adde0c94
  by Angelos Evripiotis at 2019-02-11T09:24:48Z

  tests/format/include: remove unused tmpdir's
  
  Don't create and remove temp dirs unnecessarily when they are not used,
  looks like these were just copy-pastes without intended side-effects.
  

• a66f8379
  by Jürg Billeter at 2019-02-11T13:52:54Z

  Merge branch 'aevri/include-error' into 'master'
  
  More user-friendly reporting on include errors
  
  See merge request BuildStream/buildstream!891

• a482b008
  by Javier Jardón at 2019-02-11T19:23:02Z

  .gitlab-ci.yml: Do not automatically run "test-wsl" until runner problems are sorted out
  

• 0816b8b1
  by Jürg Billeter at 2019-02-11T21:29:29Z

  Merge branch 'jjardon/allow_fail_WSL' into 'master'
  
  .gitlab-ci.yml: allow "test-wsl" to fail until runner problems are sorted out
  
  See merge request BuildStream/buildstream!1145

• a7aed65a
  by Jürg Billeter at 2019-02-12T05:52:07Z

  utils.py: Increase buffer size in sha256sum()
  
  Increasing buffer size from 4 kB to 64 kB speeds up read() bandwidth by
  factor 4, according to a very simple benchmark.
  

• 8b9e1d24
  by Jürg Billeter at 2019-02-12T05:52:07Z

  _cas/cascache.py: Increase buffer size in add_object()
  
  Increasing buffer size from 4 kB to 64 kB speeds up read() bandwidth by
  factor 4, according to a very simple benchmark.
  

• 86a9048a
  by Jürg Billeter at 2019-02-12T07:08:18Z

  Merge branch 'juerg/buffer-size' into 'master'
  
  Increase read buffer size to improve performance
  
  See merge request BuildStream/buildstream!1142

• a739e4ac
  by Tom Pollard at 2019-02-12T13:06:58Z

  WIP: Make uploading of build trees configurable
  

30 changed files:

• .gitlab-ci.yml
• CONTRIBUTING.rst
• NEWS
• buildstream/_artifactcache.py
• buildstream/_cas/cascache.py
• buildstream/_cas/casremote.py
• buildstream/_frontend/cli.py
• buildstream/_frontend/widget.py
• buildstream/_includes.py
• buildstream/_loader/loadelement.py
• buildstream/_project.py
• buildstream/_stream.py
• buildstream/element.py
• buildstream/plugins/elements/import.py
• buildstream/plugins/sources/local.py
• + buildstream/plugintestutils/__init__.py
• tests/testutils/integration.py → buildstream/plugintestutils/integration.py
• tests/testutils/runcli.py → buildstream/plugintestutils/runcli.py
• buildstream/sandbox/sandbox.py
• buildstream/storage/_casbaseddirectory.py
• buildstream/utils.py
• doc/source/using_config.rst
• requirements/requirements.in
• requirements/requirements.txt
• tests/artifactcache/cache_size.py
• tests/artifactcache/config.py
• tests/artifactcache/expiry.py
• tests/artifactcache/junctions.py
• tests/artifactcache/pull.py
• tests/artifactcache/push.py

The diff was not included because it is too large.

—
View it on GitLab.
You're receiving this email because of your account on gitlab.com. If you'd like to receive fewer emails, you can adjust your notification settings.