[Notes] [Git][BuildStream/buildstream][mablanch/630-remote-execution-reconn] 29 commits: fuse: Report the correct device number for devices

[Martin Blanchard <gitlab mg gitlab com>]

Title: GitLab

Martin Blanchard pushed to branch mablanch/630-remote-execution-reconn at BuildStream / buildstream

Commits:

• 081dcafa
  by Richard Maw at 2018-09-18T13:22:38Z

  fuse: Report the correct device number for devices
  
  This fixes all devices being mapped to the non-existant device 0,
  which prevents being able to use even safe devices like /dev/null
  through the hardlinks FUSE layer.
  

• d0425608
  by Richard Maw at 2018-09-18T13:22:38Z

  FUSE: Mount with -odev in chroot sandbox
  
  This is needed to permit access to the device nodes added to /dev
  on Linux when FUSE is used as root.
  
  The chroot sandbox only works with all privileges,
  so there's no explicit check for being root
  or having the appropriate capabilities.
  
  A check for whether it's running as root isn't needed on Linux with bubblewrap
  because /dev or its devices are mounted on top of the FUSE layer,
  so device nodes are accessed directly rather than through the FUSE layer.
  

• 8430fdc7
  by Richard Maw at 2018-09-18T13:22:38Z

  tests: test that integration commands can use /dev
  

• d8450166
  by Tristan Van Berkom at 2018-09-18T13:50:15Z

  Merge branch 'richardmaw/fix-chroot-sandbox-devices' into 'master'
  
  fix chroot sandbox devices
  
  See merge request BuildStream/buildstream!781

• ba4da3a4
  by knownexus at 2018-09-18T16:45:09Z

  Incorrect error when malformed project.conf
  
  bst build returns "missing project.conf" when a project.conf is invalid
  This results in an existing project with malformed yaml being dismissed
  and attempts to make a new project
  
  Added new exception
  

• 89a16e17
  by knownexus at 2018-09-18T16:45:09Z

  Adding test for Invalid Yaml
  

• 72b59021
  by Phillip Smyth at 2018-09-19T08:48:51Z

  Merge branch 'issue-642-Invalid_project.conf_seen_as_missing' into 'master'
  
  Incorrect error when malformed project.conf
  
  Closes #642
  
  See merge request BuildStream/buildstream!792

• ca811a4d
  by Josh Smith at 2018-09-19T09:25:21Z

  Rework Skipped usage
  
  The SKIPPED message type is now used to indicate the end of a task which
  was successful without having to perform the given task.
  
  This overhauls the use of `Queue.done()` and therefore queues do not
  need to provide a processed/skipped return value from `done()`. Instead
  this is replaced with the action of raising a `SkipJob` exception from
  within `Queue.process()`.
  

• 16fbc3e3
  by Josh Smith at 2018-09-19T09:25:21Z

  tests.py: Test skip on push
  
  Adds a test to ensure that BuildStream alerts the user of a skipped push
  when the remote already has the artifact cached.
  

• ab56f693
  by Josh Smith at 2018-09-19T09:25:21Z

  element.py: Remove redundant timed_activity
  
  This removes the timed_activity for an element _push action. This is
  unnecessary as the job is already being timed elsewhere.
  

• 198fbfe8
  by Josh Smith at 2018-09-19T09:25:21Z

  cascache.py: Move push/pull messaging to cascache
  
  Pulled/Pushed messages will no longer be produced from within
  element.py, instead they will be produced during CasCache push() and
  pull() appropriately.
  
  Message consistency has also been improved.
  

• 213f7794
  by Josh Smith at 2018-09-19T09:25:21Z

  cascache.py: Modify messaging API calls
  
  Both pulling and pushing INFO messages are now status messages.
  
  Calls to the messaging API through `self.context.message()` have now
  been switched to `element.info`.
  

• dddd6025
  by Qinusty at 2018-09-19T10:59:48Z

  Merge branch 'Qinusty/skipped-rework' into 'master'
  
  Add SkipJob for indicating a skipped activity
  
  See merge request BuildStream/buildstream!765

• 16d9c6e5
  by Tristan Van Berkom at 2018-09-19T11:08:33Z

  _frontend/status.py: Completely remove the blessings dependency from BuildStream
  
  This actually improves reliability of the status bar because we
  now disable it completely in the case that not all of the terminal
  escape sequences are supported on the given terminal.
  
  This replaces the few functions we were using, to move the cursor
  up one line, move it to the beginning of the line, and to clear a
  line, with low level functions provided by the curses module in
  the standard library.
  
  This change makes it easier for downstream distro package maintainers
  to package BuildStream, particularly on Fedora.
  
  Asides from changing _frontend/status.py, this commit includes the
  following changes:
  
    * _frontend/app.py: Use python isatty() function to determine if
                        we are connected to a tty, instead of relying
  		      on blessings.
  
    * setup.py: Remove the dependency on blessings.
  

• 7dd74b01
  by Tristan Van Berkom at 2018-09-19T11:27:55Z

  Merge branch 'tristan/remove-blessings' into 'master'
  
  _frontend/status.py: Completely remove the blessings dependency from BuildStream
  
  See merge request BuildStream/buildstream!808

• 335d5a45
  by Adam Jones at 2018-09-19T13:00:45Z

  Fix rst links for guideline links
  

• 667dd4ca
  by Javier Jardón at 2018-09-19T13:25:36Z

  Merge branch 'adamjones/contributing-links' into 'master'
  
  Fix rst link formatting for guideline links
  
  See merge request BuildStream/buildstream!811

• 68ef69e4
  by Tristan Van Berkom at 2018-09-21T05:20:46Z

  source.py: Fix re-instantiation
  
  This fixes an issue where the re-instantiated Source used with
  Source mirroring enabled is not completely initialized.
  
  Failing to load the ref from the project.refs file for instance,
  will result in a crash at `fetch` time.
  
  This fixes issue #666
  

• 662c729f
  by Tristan Van Berkom at 2018-09-21T05:59:30Z

  Merge branch 'tristan/fix-source-reinstantiation' into 'master'
  
  source.py: Fix re-instantiation
  
  Closes #666
  
  See merge request BuildStream/buildstream!817

• 461a0588
  by Jim MacArthur at 2018-09-21T10:53:11Z

  element.py: Remove early warning and check directory is not None
  
  The check for directory should have always been here. The early warning
  test doesn't work for `bst checkout` because caches haven't been configured
  at the point of the test, so I've had to remove it.
  

• aa9caaac
  by Jim MacArthur at 2018-09-21T10:53:11Z

  _sandboxremote.py: Ignore return value of push_directory
  
  The return value is always upload_vdir.ref.
  

• 2aae68c7
  by Jim MacArthur at 2018-09-21T10:53:11Z

  cascache.py: make push_remote raise exception if no push remotes exist
  
  Also add docstring to method and remove return value since it was useless
  

• ca1bb72c
  by Jim MacArthur at 2018-09-21T10:53:11Z

  tests/artifactcache/push.py: Ignore return value of push_directory
  

• 55c93a82
  by Jim MacArthur at 2018-09-21T11:26:55Z

  Merge branch 'jmac/remote_exec_checkout_fix' into 'master'
  
  Remote exec: Remove early warning and check directory is not None
  
  See merge request BuildStream/buildstream!800

• e209beb0
  by Chandan Singh at 2018-09-21T13:10:08Z

  _stream.py: Ensure source-bundle's source directory exists
  
  Currently, `source-bundle` command is entirely broken as it tries to stage the
  sources in a directory that doesn't exist. Fix it by ensuring that we create
  the necessary directories before calling any methods that try to use those
  directories.
  
  This fix comes with a regression test to ensure that the basic use-case
  of `source-bundle` continues to work in future.
  
  Fixes https://gitlab.com/BuildStream/buildstream/issues/651.
  

• 0b000518
  by Chandan Singh at 2018-09-21T13:56:55Z

  Merge branch 'chandan/fix-source-bundle' into 'master'
  
  Fix source-bundle command
  
  Closes #651
  
  See merge request BuildStream/buildstream!807

• ef26043a
  by Chandan Singh at 2018-09-21T17:14:16Z

  setup.py: Make website the primary homepage
  

• 1b2aed40
  by Chandan Singh at 2018-09-21T17:40:11Z

  Merge branch 'chandan/update-project-homepage' into 'master'
  
  setup.py: Make website the primary homepage
  
  See merge request BuildStream/buildstream!795

• a04290ad
  by Martin Blanchard at 2018-09-24T13:04:54Z

  _sandboxremote.py: Try to reopen operation steam on failure
  
  The REAPI allows a client to reconnect to an ongoing operation stream by
  providing a WaitExecution(). If implemented on server side, BuildStream
  will try to recover from connection errors using it.
  
  https://gitlab.com/BuildStream/buildstream/issues/630
  

30 changed files:

• CONTRIBUTING.rst
• buildstream/_artifactcache/cascache.py
• buildstream/_exceptions.py
• buildstream/_frontend/app.py
• buildstream/_frontend/status.py
• buildstream/_fuse/hardlinks.py
• buildstream/_fuse/mount.py
• buildstream/_project.py
• buildstream/_scheduler/jobs/job.py
• buildstream/_scheduler/queues/buildqueue.py
• buildstream/_scheduler/queues/fetchqueue.py
• buildstream/_scheduler/queues/pullqueue.py
• buildstream/_scheduler/queues/pushqueue.py
• buildstream/_scheduler/queues/queue.py
• buildstream/_scheduler/queues/trackqueue.py
• buildstream/_stream.py
• buildstream/element.py
• buildstream/sandbox/_mount.py
• buildstream/sandbox/_sandboxchroot.py
• buildstream/sandbox/_sandboxremote.py
• buildstream/source.py
• setup.py
• tests/artifactcache/push.py
• tests/format/project.py
• + tests/format/project/invalid-yaml/manual.bst
• + tests/format/project/invalid-yaml/project.conf
• + tests/frontend/project/elements/source-bundle/source-bundle-hello.bst
• + tests/frontend/project/files/source-bundle/llamas.txt
• tests/frontend/pull.py
• tests/frontend/push.py

The diff was not included because it is too large.

—
View it on GitLab.
You're receiving this email because of your account on gitlab.com. If you'd like to receive fewer emails, you can adjust your notification settings.