[Notes] [Git][BuildStream/buildstream][tiagogomes/issue-573] 144 commits: _frontend/app.py: Notify session completions

[Tiago Gomes <gitlab mg gitlab com>]

Title: GitLab

Tiago Gomes pushed to branch tiagogomes/issue-573 at BuildStream / buildstream

Commits:

• 10f27f3f
  by Tristan Van Berkom at 2018-08-17T06:20:40Z

  _frontend/app.py: Notify session completions
  
  Use the optionally implemented desktop notification method
  to notify when a session completes.
  
  Previously, this used to only notify when an interactive prompt
  appears.
  
  This is an attempt to fix #385
  

• c102b92f
  by Tristan Van Berkom at 2018-08-17T08:52:07Z

  Merge branch 'tristan/notifications' into 'master'
  
  _frontend/app.py: Notify session completions
  
  Closes #385
  
  See merge request BuildStream/buildstream!672

• 9b6fac5a
  by William Salmon at 2018-08-17T09:48:01Z

  Add Error to git and ostree sources configure
  
  Raise a error at configure time if the track and ref properties are
  not present in the sources.
  
  This is to address https://gitlab.com/BuildStream/buildstream/issues/471
  that documented unhelpful behaviour when tracking git sources. However
  the issue was also identified in ostree.
  

• d5ed4f45
  by William Salmon at 2018-08-17T09:49:23Z

  Improve error message for build if there are refs missing
  

• c43af4eb
  by Will Salmon at 2018-08-17T10:51:38Z

  Merge branch 'willsalmon/APIFix' into 'master'
  
  Updating the no track or ref fix to match the buildstream style
  
  See merge request BuildStream/buildstream!628

• 7263ea8c
  by Josh Smith at 2018-08-17T13:19:23Z

  job.py: Prevent terminated jobs retrying
  
  Fixes #531: Jobs were retrying when terminated, this lead to the process
  being spawned again and starting up fresh.
  

• 30f696f2
  by Qinusty at 2018-08-17T14:29:45Z

  Merge branch 'Qinusty/531-fetch-retries-on-terminate' into 'master'
  
  Prevent jobs retrying on terminate
  
  Closes #531
  
  See merge request BuildStream/buildstream!662

• c15cb951
  by Tristan Van Berkom at 2018-08-20T10:19:03Z

  setup.cfg: Add tests/integration/project to norecursedirs
  
  This is causing pytest to try to import the recently added app1.py
  from the pip related tests. This fails because it's not meant to be
  imported outside of the sandbox environment.
  

• 372abed5
  by Tristan Van Berkom at 2018-08-20T11:47:53Z

  Merge branch 'tristan/exclude-project-py-from-tests' into 'master'
  
  setup.cfg: Add tests/integration/project to norecursedirs
  
  See merge request BuildStream/buildstream!682

• 1f88a1e9
  by Jonathan Maw at 2018-08-20T12:36:02Z

  Use ArtifactCache's get_cache_size when calculating the quota
  
  It would have been more convenient to store the quota size in the
  ArtifactCache, except that the scheduler needs the quota size and
  doesn't have access to the ArtifactCache.
  

• d9507a9e
  by Jonathan Maw at 2018-08-20T12:36:02Z

  Fix get_cache_size to store it in the ArtifactCache, not the context
  

• a9b81dc4
  by Jonathan Maw at 2018-08-20T12:36:02Z

  artifactcache: Read and write cache size to disk
  

• a67906e6
  by Jonathan Maw at 2018-08-20T13:06:51Z

  Add tests that cache size works
  

• 92e34ccd
  by Jonathan Maw at 2018-08-20T16:27:18Z

  Merge branch 'jonathan/cache-cache-size' into 'master'
  
  Jonathan/cache cache size
  
  See merge request BuildStream/buildstream!679

• f1a619b5
  by Jonathan Maw at 2018-08-20T16:34:03Z

  CASCache: Fix cell-var-from-loop linting error
  

• ba74a128
  by Jonathan Maw at 2018-08-20T17:53:33Z

  Merge branch 'jonathan/cascache-cell-var-from-loop' into 'master'
  
  Jonathan/cascache cell var from loop
  
  See merge request BuildStream/buildstream!686

• 18acd3ea
  by Valentin David at 2018-08-21T08:44:34Z

  Fix broken indentation after tracking.
  
  Issue was introduced by 171e803f (include directive) and the fix was
  found courtesy of @Qinusty. This fixes also the include
  feature. Because elements are to be serialized, the included fragments
  need to use copy_tree when loaded.
  
  Related to #470.
  

• 6bd688cf
  by Valentin David at 2018-08-21T08:44:34Z

  buildstream/_includes.py: Fix caching of included fragments.
  

• 4cab18e3
  by Qinusty at 2018-08-21T09:38:39Z

  Merge branch 'valentindavid/fix-broken-indentation-after-track' into 'master'
  
  Fix broken indentation after track
  
  See merge request BuildStream/buildstream!622

• f3fbdac0
  by Jonathan Maw at 2018-08-21T11:33:34Z

  Pipeline: Skip except_elements logic if no elements to except
  

• 3a4c147a
  by Jonathan Maw at 2018-08-21T12:43:41Z

  Merge branch 'jonathan/faster-except-elements' into 'master'
  
  Pipeline: Skip except_elements logic if no elements to except
  
  See merge request BuildStream/buildstream!688

• d1bd8c0b
  by Chandan Singh at 2018-08-21T12:46:57Z

  .gitlab-ci.yml: Bump tags for testsuite images
  
  These new images come with pinned versions of `pytest` and `pylint`:
  
  - `pylint`: `== 2.1.1`
  - `pytest`: `>= 3.7`
  

• 12d1cec2
  by Chandan Singh at 2018-08-21T12:46:57Z

  dev-requirements.txt: Pin versions of pytest and pylint
  
  These packages should only be updated as a deliberate change and the
  code should be tested with the new versions to ensure that the test
  still pass.
  
  Any future updates should also happen in sync with the
  buildstream-docker-images repository so that the testsuite base images
  also enforce the same restrictions for the development requirements.
  
  Replaces https://gitlab.com/BuildStream/buildstream/merge_requests/684.
  

• 320b9562
  by Tristan Van Berkom at 2018-08-21T13:57:00Z

  Merge branch 'chandan/update-ci-tags' into 'master'
  
  Restrict pylint/pytest versions and bump CI tags
  
  See merge request BuildStream/buildstream!689

• ef606229
  by Josh Smith at 2018-08-21T14:49:57Z

  plugin.py: Stop printing None for fatal-warnings
  
  Providing warn with detail=None (default) will no longer print None when
  a fatal warning is triggered.
  

• d8256c74
  by Qinusty at 2018-08-21T15:46:14Z

  Merge branch 'Qinusty/598-fatal-warning-none-detail' into 'master'
  
  Fatal warnings no longer print None when detail=None
  
  See merge request BuildStream/buildstream!694

• ab1caac1
  by Chandan Singh at 2018-08-21T23:47:32Z

  setup.py: Add fields required for publishing on PyPi
  
  Fill out those fields in `setup.py` that are required for publishing a
  package on PyPi.
  
  Part of https://gitlab.com/BuildStream/buildstream/issues/587.
  

• 81278f84
  by Tristan Van Berkom at 2018-08-22T05:23:33Z

  Merge branch 'chandan/pypi-prep' into 'master'
  
  setup.py: Add fields required for publishing on PyPi
  
  See merge request BuildStream/buildstream!695

• 3d4e649d
  by Tristan Van Berkom at 2018-08-22T05:24:42Z

  _frontend/linuxapp.py: Fix special casing around desktop notification escape sequence
  
  Now we allow the notification to happen on any TERM
  which starts with 'xterm' or 'vte', and we only do it
  if the VTE_VERSION is >= 4600, where we know for sure that
  VTE will not print garbage on the terminal.
  
  Fixes #385
  

• c8bafb68
  by Tristan Van Berkom at 2018-08-22T06:24:12Z

  Merge branch 'tristan/notifications' into 'master'
  
  _frontend/linuxapp.py: Fix special casing around desktop notification escape sequence
  
  Closes #385
  
  See merge request BuildStream/buildstream!692

• eeaddbac
  by William Salmon at 2018-08-22T08:05:28Z

  Catch Non Numeric versions
  
  This patch just displays a better message than the default stack trace
  but dose not try to fix the problem. A further patch will be created but
  it effects versioneer so may take longer to land as it may need to go
  via versioneer mainline.
  

• e15f5fa3
  by William Salmon at 2018-08-22T08:05:28Z

  Search for tags with the *.*.* patten for version
  
  This has been done in a way that I hope might be able to be upstreamed
  in to versioneer. This is not garanteed but it would be good if it
  could be.
  
  Please see https://github.com/warner/python-versioneer/pull/186 and
  https://github.com/wsalmonct/python-versioneer/tree/feature/regexTags
  for further details.
  

• ff52ae18
  by Will Salmon at 2018-08-22T09:33:04Z

  Merge branch 'willsalmon/versionTagRegrex' into 'master'
  
  Search for tags with the *.*.* patten for version
  
  See merge request BuildStream/buildstream!601

• f4e51cf1
  by Sam Thursfield at 2018-08-22T10:38:41Z

  Don't strip pathname from debug symbol files
  
  When GDB looks for debug symbols it looks for the full path of the file
  inside the configured debug-file-directory. For example, if the
  debug-file-directory is set to a default of /usr/lib/debug, and you are
  debugging /usr/bin/python3, GDB will look for its debug symbols at this
  location: /usr/lib/debug/usr/bin/python3.
  
  BuildStream has been putting all debug files inside /usr/lib/debug
  under their $(basename), so in the above example GDB would fail to find
  any debug symbols for /usr/bin/python3 because they would be in the
  incorrect locatoin of /usr/lib/debug/python3.
  

• 5b79bbb7
  by Tristan Van Berkom at 2018-08-22T11:39:32Z

  Merge branch 'tristan/debug-symbols-location' into 'master'
  
  Don't strip pathname from debug symbol files
  
  See merge request BuildStream/buildstream!697

• 91d62d2f
  by Chandan Singh at 2018-08-22T18:38:01Z

  MANIFEST.in: Fix include for dev-requirements.txt
  
  Currently, running any setuptools commands using `setup.py` generates a
  warning like so:
          warning: manifest_maker: MANIFEST.in, line 21: unknown action 'dev-requirements.txt'
  
  The syntax is invalid and got accidentally introduced in !637 but it's a
  shame that this is not a warning and no obvious way to make it an error
  if there are invalid things in MANIFEST.in file.
  

• cd0775eb
  by Chandan Singh at 2018-08-22T23:44:36Z

  Merge branch 'chandan/fix-mainfest-dev-requirements' into 'master'
  
  MANIFEST.in: Fix include for dev-requirements.txt
  
  See merge request BuildStream/buildstream!704

• b0d1aa83
  by Tristan Van Berkom at 2018-08-23T05:54:05Z

  _frontend/linuxapp.py: Fixing fallout from !693
  
  When fixing terminal notifications, I had introduced a bug
  with accesses to `os.environ` which triggered KeyError, this
  patch fixes it.
  

• 2215859c
  by Valentin David at 2018-08-23T06:40:19Z

  Improve error message for deleted open workspaces
  
  Fixes #576.
  

• e37ac3bc
  by Tristan Van Berkom at 2018-08-23T07:45:49Z

  Merge branch 'valentindavid/inconsistant-workspace' into 'master'
  
  Improve error message for deleted open workspaces
  
  Closes #576
  
  See merge request BuildStream/buildstream!703

• 2ac654a8
  by Valentin David at 2018-08-23T08:02:50Z

  Remove artifact extracts when artifact expires in cache
  
  Fixes #561
  

• 176aa09f
  by Tristan Van Berkom at 2018-08-23T09:10:51Z

  Merge branch 'valentindavid/extract-expiry' into 'master'
  
  Remove artifact extracts when artifact expires in cache
  
  Closes #561
  
  See merge request BuildStream/buildstream!685

• f1e3f10f
  by Mathieu Bridon at 2018-08-23T09:11:47Z

  deps: Specify the minimum version required for blessings
  
  Buildstream uses the Terminal.does_styling attribute, which was only
  added in blessings 1.6.
  
  Blessings helpfully returns an empty string when calling an nonexistent
  attribute on the Terminal object, instead of failing.
  
  Because Fedora has blessings 1.5, Buildstream thought that my terminal
  couldn't handle styling, and just didn't print the status bar, silently.
  
  Specifying the minimum version avoids this silent failure.
  

• bea01531
  by Tristan Van Berkom at 2018-08-23T09:14:40Z

  .gitlab-ci.yml: Avoid running tests in post-merge
  

• da19bcf1
  by Tristan Van Berkom at 2018-08-23T09:14:40Z

  README.rst: Removing the badges
  
  Now that we only run pre-merge CI, it makes no sense to show a badge for
  the coverage and pipeline status of the last run of master.
  
  It would make sense to show a badge for the last pipeline which
  was run for the last merge request that was merged to master, but
  I don't see any feature to get that information.
  

• 8216ff8d
  by Tristan Van Berkom at 2018-08-23T10:13:23Z

  Merge branch 'tristan/reduce-gitlab-ci' into 'master'
  
  .gitlab-ci.yml: Avoid running tests in post-merge
  
  See merge request BuildStream/buildstream!709

• 56096b60
  by Chandan Singh at 2018-08-24T02:12:03Z

  .gitlab-ci.yml: Verify that source tarball installs correctly
  
  Add a check to verify that the source distribution tarball that we
  generate installs corrctly. It is useful to do this check as this is the
  same tarball will be used when installing BuildStream via PyPI.
  
  This check also happens indirectly in the coverage job where we install
  BuildStream but this check makes it more explicit and will also cause
  the CI to fail early if the tarball is not correct.
  

• 86e4729d
  by Tristan Van Berkom at 2018-08-24T06:42:03Z

  Merge branch 'chandan/ci-sdist-test' into 'master'
  
  .gitlab-ci.yml: Verify that source tarball installs correctly
  
  See merge request BuildStream/buildstream!720

• d88568ef
  by Valentin David at 2018-08-24T06:48:08Z

  tests/integration/source-determinism.py: Use cli_integration.
  

• f7ef151b
  by Tristan Van Berkom at 2018-08-24T07:36:19Z

  Merge branch 'valentindavid/cli_integration_source_determinism' into 'master'
  
  tests/integration/source-determinism.py: Use cli_integration.
  
  See merge request BuildStream/buildstream!715

• fa476d79
  by Tristan Van Berkom at 2018-08-24T07:55:43Z

  tests/integration/project: Use the same alias for the alpine tarball
  
  This makes the integration tests use the same 'alpine' alias for the
  tests as we use in the examples, this avoids a redundant download
  of an extra alpine tarball in integration tests.
  
  This is a part of #603
  

• 255f9ee3
  by Tristan Van Berkom at 2018-08-24T08:39:19Z

  Merge branch 'tristan/avoid-redundant-alpine' into 'master'
  
  tests/integration/project: Use the same alias for the alpine tarball
  
  See merge request BuildStream/buildstream!722

• e1ed09aa
  by Jim MacArthur at 2018-08-24T09:51:27Z

  element.py: chmod 777 directories if delete fails.
  
  Staging may produce directories with less than 'rwx' permissions which
  will cause tempfile to throw an exception on deleting the temporary
  directory if not changed.
  

• 01fe504b
  by James Ennis at 2018-08-24T09:51:27Z

  tar tests: Add tarball which contains a read-only dir
  

• a3755c9a
  by James Ennis at 2018-08-24T09:51:27Z

  tar.py: Add test for a tarball containing a read-only dir
  

• 1bfcca1a
  by James Ennis at 2018-08-24T10:31:41Z

  Merge branch 'jmac/tempfile-extraction-bug' into 'master'
  
  Correct crash after staging tars with read-only directories
  
  See merge request BuildStream/buildstream!713

• 744925f3
  by James Ennis at 2018-08-24T10:34:57Z

  HACKING.rst: Remove -k flag for individual tests as this is not required
  

• dfee6d75
  by James Ennis at 2018-08-24T11:15:45Z

  Merge branch 'jennis/correct_HACKING' into 'master'
  
  '-k' flag not needed to run individual tests
  
  See merge request BuildStream/buildstream!714

• 923bfaec
  by Chandan Singh at 2018-08-24T11:22:33Z

  doc: Add instructions to install BuildStream via PyPI
  
  Add instructions to install and update BuildStream python package via
  PyPI, and also make it the recommended method.
  
  Part of https://gitlab.com/BuildStream/buildstream/issues/587.
  

• 2c3a6ab8
  by Chandan Singh at 2018-08-24T12:01:56Z

  Merge branch 'chandan/pip-install-instructions' into 'master'
  
  doc: Add instructions to install BuildStream via PyPI
  
  See merge request BuildStream/buildstream!717

• f4745600
  by Josh Smith at 2018-08-24T12:20:05Z

  setup.cfg: Show timing of the 20 slowest tests
  
  This helps identifying what tests are slow or if the CI got stuck on
  some of them
  

• 4c40a027
  by Javier Jardón at 2018-08-24T13:04:41Z

  Merge branch 'jjardon/ci_show_timings' into 'master'
  
  .gitlab-ci.yml: Show timing of the 20 slowest tests
  
  See merge request BuildStream/buildstream!716

• 0301f74e
  by Benjamin Schubert at 2018-08-24T14:52:49Z

  buildelement.py: remove double logging (again) as in #507
  
  This was broken again by d14d8ee29b5fcaadcfd05934de71b46221243fcd,
  this commits re-applies the fix from 12fea82e12a27eccb34ef4efbaa7c6874787eb4c
  

• f991644c
  by Qinusty at 2018-08-24T15:33:48Z

  Merge branch 'bschubert15/fix-double-log' into 'master'
  
  buildelement.py: remove double logging (again) as in #507
  
  See merge request BuildStream/buildstream!730

• f4c2bf19
  by Phil Dawson at 2018-08-25T08:43:09Z

  workspaces.rst: Move terminal sessions to doc/source/sessions-stored/
  

• 23b01f24
  by Phil Dawson at 2018-08-25T08:43:09Z

  workspaces.rst: fix note which is not rendering correctly
  

• 369bec0c
  by Tristan Van Berkom at 2018-08-25T08:44:26Z

  doc/source/developing/workspaces.rst: Some whitespace fixes
  
  Some whitespace changes to follow the style regarding empty
  lines between sections.
  

• 24cb3037
  by Tristan Van Berkom at 2018-08-25T09:10:53Z

  .gitignore: Ignore doc/source/sessions directory of generated html files
  
  A preventative measure against people committing the generated
  html files to the wrong location.
  

• 4f8fe977
  by Tristan Van Berkom at 2018-08-25T09:10:53Z

  HACKING.rst: Documenting the new "shell" configuration in the bst2html input file format
  

• d819fb64
  by Tristan Van Berkom at 2018-08-25T11:41:15Z

  Merge branch 'tristan/fixup-workspace-docs' into 'master'
  
  Fixing some fallout in the workspace documentation additions
  
  Closes #553
  
  See merge request BuildStream/buildstream!732

• ba675863
  by Tristan Van Berkom at 2018-08-25T11:42:08Z

  doc/source/main_install.rst: Use one level depth toctree
  
  This main section is just a choice of subsections, lets
  make this more clear with a single level depth toctree.
  

• 52fce701
  by Tristan Van Berkom at 2018-08-25T11:42:08Z

  doc/source/main_install.rst: Move the main install link target here
  
  This is referred to from the artifact install guide, and was
  previously pointing directly to the source install guide.
  

• f7289b6b
  by Tristan Van Berkom at 2018-08-25T11:42:08Z

  doc/source/install_source.rst: Splitting up install instructions
  
  Instead of having all of this on one page, we now have a much
  simpler page for installing on distros where BuildStream is packaged
  and a separate page for installing distro specific system dependencies
  and installing from source code (either from PyPI or git).
  

• a1fa504d
  by Tristan Van Berkom at 2018-08-25T11:42:08Z

  Add section about current releases
  
  This is not ideal as the releases are hardcoded, but I think is better
  than nothing until we got a solution to automate this
  
  This commit was originally by Javier Jardón <jjardon gnome org> from
  merge request !661, and then later reworked into an install guide refactor.
  

• 08632568
  by Tristan Van Berkom at 2018-08-25T11:42:08Z

  doc/source/install_source.rst: Explain about release tag in git install instructions.
  
  This obsoletes Laurence's explanation in merge request !657, and
  is a part of the initiative of issue #528 to clarify which versions
  users should be installing.
  

• a7e046d5
  by Tristan Van Berkom at 2018-08-25T12:22:51Z

  Merge branch 'tristan/install-guide-refactoring' into 'master'
  
  Install guide refactoring
  
  See merge request BuildStream/buildstream!733

• c53d190b
  by Javier Jardón at 2018-08-26T06:04:58Z

  doc/bst2html.py: Fix deprecation warning
  
  This fixes the following:
  "
  /home/jjardon/buildstream/buildstream/doc/bst2html.py:32: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated, and in 3.8 it will stop working
    from collections import Mapping
  "
  

• a9390efd
  by Tristan Van Berkom at 2018-08-26T07:27:50Z

  Merge branch 'jjardon/doc_fix_deprecations' into 'master'
  
  doc/bst2html.py: Fix deprecation warning
  
  See merge request BuildStream/buildstream!727

• 5fb772b5
  by Tristan Van Berkom at 2018-08-26T07:30:58Z

  .gitlab-ci.yml: Trying to fix code quality reports
  
  This hasnt been working for a while, it might be because GitLab
  doesnt quite grasp that we have multiple branches to merge MRs to,
  or it might be because they have change the API and broken back compat
  in some way.
  
  See: https://docs.gitlab.com/ee/ci/examples/code_quality.html
  

• fa696307
  by Tristan Van Berkom at 2018-08-26T08:10:59Z

  Merge branch 'tristan/fix-code-quality' into 'master'
  
  .gitlab-ci.yml: Trying to fix code quality reports
  
  See merge request BuildStream/buildstream!735

• 0f329276
  by Tristan Van Berkom at 2018-08-26T08:11:56Z

  README.rst: Use stronger language to follow the installation guide.
  
  And also refer to the user guide section instead of directly to the
  tutorial, the tutorial will still be the first section of the user
  guide so this is a better link target for getting started.
  
  This is related to #528
  

• 4b6f3d0d
  by Tristan Van Berkom at 2018-08-26T08:57:05Z

  Merge branch 'tristan/readme-version' into 'master'
  
  README.rst: Use stronger language to follow the installation guide.
  
  See merge request BuildStream/buildstream!736

• 7c6e91f5
  by Tristan Van Berkom at 2018-08-27T06:51:20Z

  Revert ".gitlab-ci.yml: Avoid running tests in post-merge"
  
  This reverts commit bea01531b984522940562866e904c83e8f9aed50.
  

• 539963e3
  by Tristan Van Berkom at 2018-08-27T06:51:47Z

  Revert "README.rst: Removing the badges"
  
  This reverts commit da19bcf1de75bf930d0f233addc858b4073d0173.
  

• 5a5b6699
  by Tristan Van Berkom at 2018-08-27T06:53:55Z

  .gitlab-ci.yml: Moving code_quality job into tests phase
  
  This job always takes a long time and does not really depend
  on the artifacts in the 'test' phase, moving it to the 'test'
  phase will reduce overall CI time.
  

• c6ba8932
  by Tristan Van Berkom at 2018-08-27T07:27:06Z

  Merge branch 'tristan/restore-post-merge-CI' into 'master'
  
  Tristan/restore post merge ci
  
  See merge request BuildStream/buildstream!737

• 9cb69b0b
  by Tristan Van Berkom at 2018-08-27T07:46:22Z

  doc/source/main_install.rst: Clarify that BuildStream cannot be run on Windows
  
  The previous wording was misleading and caused one to think you can run
  BuildStream on Windows, this commit fixes that and rewords the main section
  heading to be a bit more abstract.
  
  Fixes issue #608
  

• 8c7fadd8
  by Tristan Van Berkom at 2018-08-27T08:12:52Z

  Merge branch 'tristan/install-guide-main' into 'master'
  
  doc/source/main_install.rst: Clarify that BuildStream cannot be run on Windows
  
  Closes #608
  
  See merge request BuildStream/buildstream!739

• ddbf7bc2
  by Jürg Billeter at 2018-08-28T08:56:06Z

  element.py: Schedule assemble for key of workspaced elements
  
  For uncached workspaced elements, assemble is required even just to
  calculate the cache key. As dynamic scheduling relies on cache keys,
  schedule assemble for uncached workspace elements even if they have not
  been marked as required yet.
  
  Fixes #461.
  

• ffc556ff
  by Valentin David at 2018-08-28T09:01:05Z

  tests/frontend/workspace.py: Add test for workspaced dependencies
  
  This adds a regression test for #461.
  

• dd90d53d
  by Jürg Billeter at 2018-08-28T09:01:05Z

  element.py: Do not attempt to pull workspaced elements
  

• 6a5a8e7a
  by Tristan Van Berkom at 2018-08-28T11:29:22Z

  Merge branch 'juerg/workspaced-dependencies' into 'master'
  
  Fix key invalidation for workspaced dependencies
  
  Closes #461
  
  See merge request BuildStream/buildstream!740

• 6047a575
  by Tristan Van Berkom at 2018-08-28T13:41:36Z

  tests/frontend/workspaces.py: Removing some redundant tests
  
  Removed redundant tests from recently merged !740, this new
  test does not need to run for every different source kind.
  

• 7535fda8
  by Jürg Billeter at 2018-08-28T14:25:35Z

  Merge branch 'tristan/remove-redundant-test' into 'master'
  
  tests/frontend/workspaces.py: Removing some redundant tests
  
  See merge request BuildStream/buildstream!741

• 10eeb503
  by Javier Jardón at 2018-08-28T22:22:00Z

  doc/source/conf.py: Fix E201, E202 warnings
  

• d3c32ca2
  by Javier Jardón at 2018-08-28T22:22:00Z

  doc/source/conf.py: Fix E402 warning
  

• 3ae5fd05
  by Javier Jardón at 2018-08-28T22:22:00Z

  Fix E305 warnings
  

• c6fb5ba7
  by Javier Jardón at 2018-08-28T22:22:00Z

  Fix E741 warnings
  

• c5eca59d
  by Tristan Van Berkom at 2018-08-29T10:45:33Z

  Merge branch 'jjardon/pycodestyle_fixes' into 'master'
  
  Some pycodestyle (PEP8) fixes
  
  See merge request BuildStream/buildstream!746

• 63c6ee72
  by Tristan Van Berkom at 2018-08-29T10:46:30Z

  doc: Adding badges.py release badge generator
  
  This adds a step to the docs generation Makefile to generate
  release.svg and snapshot.svg badges, modelled after the gitlab
  badges.
  
  This also adds the generated badges directory in docs to .gitignore
  

• 2d527052
  by Tristan Van Berkom at 2018-08-29T10:46:30Z

  README.rst: Adding the release and snapshot badges to the readme
  
  This is a part of #528
  

• 29e7eea8
  by Tristan Van Berkom at 2018-08-29T10:46:30Z

  doc: Adding the release badges to the install page and the semantic versioning page
  
  This is a part of #528
  

• 5d508779
  by Tristan Van Berkom at 2018-08-29T11:13:53Z

  Merge branch 'tristan/docs-version-badge' into 'master'
  
  Release badges
  
  See merge request BuildStream/buildstream!742

• 323a5403
  by Chandan Singh at 2018-08-29T12:13:28Z

  setup.py: Add more metadata useful for PyPI
  
  - setup.py: List useful links using `project_urls`
  
  - setup.py: Specify minumum python vresion using `python_requires`
  
    `python_requires` is the new way of specifying requirements for python
    version, as documented @
    https://packaging.python.org/guides/distributing-packages-using-setuptools/#python-requires.
  
    This will also make this requirement appear nicely on the PyPI project
    page.
  
  - setup.py: Add project classifiers
  
    PyPI will use these classifiers to categorize projects while searching
    or browsing. Full list of classifiers can be found at
    https://pypi.org/classifiers.
  

• 5fc7b5ac
  by Tristan Van Berkom at 2018-08-29T12:37:08Z

  Merge branch 'chandan/setup.py-metadata' into 'master'
  
  setup.py: Add more metadata useful for PyPI
  
  See merge request BuildStream/buildstream!718

• 42ad937d
  by Josh Smith at 2018-08-29T12:38:15Z

  Prevent ValueError on URLs without an alias
  
  Fixes #597
  

• aa3a33b3
  by Tristan Van Berkom at 2018-08-29T13:03:58Z

  Merge branch 'Qinusty/597-non-alias-url-fix' into 'master'
  
  Fix ValueError traceback for URL without alias or URI scheme
  
  Closes #597
  
  See merge request BuildStream/buildstream!700

• 2a2a79de
  by Valentin David at 2018-08-29T14:11:48Z

  Disable round-tripping when element is not modified
  

• 2df7607c
  by Tristan Van Berkom at 2018-08-29T14:43:55Z

  Merge branch 'valentindavid/roundtripping_only_when_modified' into 'master'
  
  Disable round-tripping when element is not modified
  
  See merge request BuildStream/buildstream!748

• c146dde5
  by Benjamin Schubert at 2018-08-29T16:00:24Z

  Log not-found objects in the cache as SKIPPED
  

• 19e87afb
  by Benjamin Schubert at 2018-08-29T16:01:12Z

  Add tests that not-found objects in cache are shown as SKIPPED
  

• 9cc5817f
  by Qinusty at 2018-08-29T16:25:48Z

  Merge branch 'bschubert/log-missed-cache' into 'master'
  
  Log not-found objects in the cache as SKIPPED
  
  See merge request BuildStream/buildstream!729

• 3c8646e3
  by Josh Smith at 2018-08-29T16:34:22Z

  Add cyclic check within variable resolution
  
  This aims to address #600, this will raise an exception when a resolved
  variable contains a reference to the variable.
  

• d41c42d6
  by Josh Smith at 2018-08-29T16:34:22Z

  Add tests for cyclic variables check
  
  Note: This modifies the docker containers used for testing to supply the
  pytest-timeout package.
  

• c7b72c30
  by Qinusty at 2018-08-29T16:58:48Z

  Merge branch 'Qinusty/600-recursive-variables' into 'master'
  
  Add cyclic check within variable resolution
  
  See merge request BuildStream/buildstream!712

• d28e1353
  by Tristan Van Berkom at 2018-08-30T06:02:41Z

  tests/plugins/filter.py: Don't run redundant tests
  
  There is no reason that the filter element codepaths can behave
  differently depending on the Source implementation used in the test,
  as the Source implementation does not have any filter specific
  virtual methods.
  
  Removing the redundant tests and just performing these tests with the git source.
  

• e77ae07a
  by Tristan Van Berkom at 2018-08-30T06:36:41Z

  Merge branch 'tristan/reduce-filter-tests' into 'master'
  
  tests/plugins/filter.py: Don't run redundant tests
  
  See merge request BuildStream/buildstream!753

• 9ea40e2c
  by Tristan Van Berkom at 2018-08-30T06:38:13Z

  tests/frontend/mirror.py: Reenable test_mirror_fetch_upstream_absent[ostree]
  
  This test was skipped because of issue #538, but #538 was fixed
  and the test was still not reenabled.
  

• 8aec1102
  by Tristan Van Berkom at 2018-08-30T07:06:17Z

  Merge branch 'tristan/538-reenable-ostree-test' into 'master'
  
  tests/frontend/mirror.py: Reenable test_mirror_fetch_upstream_absent[ostree]
  
  See merge request BuildStream/buildstream!755

• fcc17c82
  by Tristan Van Berkom at 2018-08-30T08:44:34Z

  source.py: Stylistic changes in Source.__do_fetch()
  
  Added some comments to make the flow easier to follow, and
  removed an annoying 'success' variabled in favor of a for / else
  loop statement.
  

• 60ad044a
  by Tristan Van Berkom at 2018-08-30T08:44:34Z

  source.py: Move Source.mark_download_url() to the public methods.
  
  This was sitting in the section for abstract methods, but this
  is most definitely not an abstract method to be implemented by
  Sources.
  

• c339f917
  by Tristan Van Berkom at 2018-08-30T08:44:34Z

  plugins/source/git.py: Fix formatting of url in tracking
  
  This was displaying the aliased URL which is pretty useless,
  use the translated URL for the timed activity.
  

• 26565f11
  by Tristan Van Berkom at 2018-08-30T09:12:28Z

  Merge branch 'tristan/source-mirroring-changes' into 'master'
  
  Minor code changes revolving around source mirroring
  
  See merge request BuildStream/buildstream!758

• a38d9163
  by Valentin David at 2018-08-30T10:26:57Z

  Report processing errors from tracking
  
  Failures to write files when tracking were not reported.
  
  Fixes #533.
  

• 02138181
  by Tristan Van Berkom at 2018-08-30T11:36:00Z

  Merge branch 'valentindavid/post_tracking_errors' into 'master'
  
  Report processing errors from tracking
  
  Closes #533
  
  See merge request BuildStream/buildstream!747

• d23d4f3e
  by Tristan Van Berkom at 2018-08-30T12:02:27Z

  _artifactcache/artifactcache.py: Write the cache_size file atomically
  
  This is causing issues while the size file is being read and written
  simultaneously.
  
  The proper fix will be to read/add/save the file atomically and that
  will require locking, but this fix is a good stop gap to existing crashes.
  

• bb6aa5a5
  by Tristan Van Berkom at 2018-08-30T12:27:55Z

  Merge branch 'tristan/atomic-cache-size-file' into 'master'
  
  _artifactcache/artifactcache.py: Write the cache_size file atomically
  
  See merge request BuildStream/buildstream!762

• 680e4fe1
  by knownexus at 2018-08-30T13:37:55Z

  Replacing string 'bzr' with value from host tools
  

• 8cd719eb
  by Phillip Smyth at 2018-08-30T15:47:06Z

  Merge branch 'bzr_fix' into 'master'
  
  Replacing string 'bzr' with value from host tools
  
  See merge request BuildStream/buildstream!764

• 18d0bfb4
  by Tom Pollard at 2018-08-30T19:14:33Z

  buildstream/_project.py: Report if project.conf is missing name
  
  Explicitly check that project.conf contains a name. This resolves
  the issue of the provenance check from _yaml.py incorrectly reporting
  the offending file as the default_config_node projectconfig.yaml
  when no name key exists in the pre_config_node dict.
  

• 95121148
  by Tiago Gomes at 2018-08-30T20:52:29Z

  Merge branch 'tpollard/591' into 'master'
  
  buildstream/_project.py: Report if project.conf is missing name
  
  See merge request BuildStream/buildstream!680

• 775d3fca
  by Tristan Van Berkom at 2018-08-31T06:05:32Z

  _project.py: Adding FIXME comment to address #591 properly
  

• 0682aa1c
  by Josh Smith at 2018-08-31T10:58:12Z

  job.py: Modify retry messages to be FAIL
  
  This adjusts the message handler for the child processes to no longer
  override the message type.
  
  This also removes the ability for unhandled non BstError exceptions to
  retry.
  

• 68eff9ba
  by Josh Smith at 2018-08-31T10:58:20Z

  tests: Modify tests to ensure retry FAILURE
  

• 9b18e1bf
  by Tristan Van Berkom at 2018-08-31T11:22:51Z

  Merge branch 'Qinusty/retries-should-fail' into 'master'
  
  Retries log as failures
  
  See merge request BuildStream/buildstream!766

• e2d8fedf
  by Josh Smith at 2018-08-31T15:53:43Z

  scheduler.py: Move cache_size logs into folder
  
  This prevents the cache_size.pid.log files from cluttering the root
  log directory.
  

• 6805a2ab
  by Tristan Van Berkom at 2018-09-01T08:24:05Z

  Merge branch 'Qinusty/cache-size-directory' into 'master'
  
  Move cache_size.pid.log files into a subdirectory of logs
  
  See merge request BuildStream/buildstream!769

• 85238057
  by Tiago Gomes at 2018-09-01T15:24:48Z

  context: remove unused variable
  

• 6cc4a9ed
  by Tiago Gomes at 2018-09-01T15:24:48Z

  cascache: rename _fetch_directory and _checkout
  
  For symmetry with _create_tree.
  

• 3d118f6f
  by Tiago Gomes at 2018-09-01T15:24:48Z

  cascache: fix oversight
  

• 24cee975
  by Tiago Gomes at 2018-09-01T15:24:48Z

  artifactcache: return bytes required to cache artifact
  
  Track number of bytes required to commit or pull an artifact and return
  this data on pull() and commit(). This takes deduplication into account.
  

• d05d195f
  by Tiago Gomes at 2018-09-01T15:24:48Z

  element: use ArtifactCache.commit() return value
  
  The ArtifactCache.commit() return value is more accurate for what
  __artifact_size is being used for, as it takes the deduplication done by
  the CAS cache into account.
  

• 03bec30c
  by Tiago Gomes at 2018-09-01T15:27:03Z

  Revamp calculation of cache size code
  
  Before this commit, the cache size was being calculated every time an
  artifact was committed to or pulled to the artifact cache. This is a
  very IO demanding operation that doesn't scale as the cache gets bigger.
  
  Now that the commit() and pull() methods of the ArtifactCache return the
  number of bytes added, we can rework the code to calculate the size of
  The cache only once at startup and to dynamically update it afterwards.
  
  The ArtifactClean.clean() is also changed to return the number of bytes
  removed instead of the new size of the cache, so that we no longer need
  the ArtifactClean.clean._set_cache_size() method.
  
  The CacheSize job is no longer used and is removed.
  
  Fixes #573.
  

• 51b9ecc8
  by Tiago Gomes at 2018-09-01T15:27:04Z

  artifactcache: add some logging to cleanup operation
  

30 changed files:

• .gitignore
• .gitlab-ci.yml
• HACKING.rst
• MANIFEST.in
• README.rst
• buildstream/_artifactcache/__init__.py
• buildstream/_artifactcache/artifactcache.py
• buildstream/_artifactcache/cascache.py
• buildstream/_artifactcache/casserver.py
• buildstream/_context.py
• buildstream/_exceptions.py
• buildstream/_frontend/app.py
• buildstream/_frontend/linuxapp.py
• buildstream/_includes.py
• buildstream/_loader/loader.py
• buildstream/_pipeline.py
• buildstream/_project.py
• buildstream/_scheduler/jobs/__init__.py
• buildstream/_scheduler/jobs/cleanupjob.py
• buildstream/_scheduler/jobs/elementjob.py
• buildstream/_scheduler/jobs/job.py
• buildstream/_scheduler/queues/buildqueue.py
• buildstream/_scheduler/queues/pullqueue.py
• buildstream/_scheduler/queues/queue.py
• buildstream/_scheduler/queues/trackqueue.py
• buildstream/_scheduler/scheduler.py
• buildstream/_variables.py
• buildstream/_version.py
• buildstream/buildelement.py
• buildstream/data/projectconfig.yaml

The diff was not included because it is too large.

—
View it on GitLab.
You're receiving this email because of your account on gitlab.com. If you'd like to receive fewer emails, you can adjust your notification settings.