[Notes] [Git][BuildStream/buildstream][coldtom/bst-fmt] 74 commits:

Thomas Coldrick pushed to branch coldtom/bst-fmt at BuildStream / buildstream

Commits:

ae5ccd76

by Phillip Smyth at 2018-11-12T14:57:51Z

_project.py: Validate nodes early in Project._load

_project.py: Added validate_nodes() helper function to prevent duplicate lists

element-path was being used before node validation resulting in uncaught errors

56a54161

by Phillip Smyth at 2018-11-12T14:57:51Z

tests/frontend: Add test for invalid element-path

e55a9703

by Jürg Billeter at 2018-11-12T15:44:45Z

Merge branch 'element-path_not_validated' into 'master'

Element path not validated before use

See merge request BuildStream/buildstream!937

c87d6e45
by Valentin David at 2018-11-14T11:43:33Z
```
Run tests on aarch64

Fixes #755
```

16b01489

by Valentin David at 2018-11-14T11:43:33Z

Disable cachekey tests on other architectures than x86_64

85046b29

by Valentin David at 2018-11-14T11:43:33Z

Disable tests on example on other architectures than x86_64

dd5a073b
by Valentin David at 2018-11-14T11:43:33Z
```
Add support for aarch64 in a test
```
c5d72ae7
by Valentin David at 2018-11-14T11:52:53Z
```
Test aarch64 only overnight
```

264a57f6

by Javier Jardón at 2018-11-14T12:22:03Z

Merge branch 'valentindavid/integration-tests-aarch64' into 'master'

Run tests on aarch64

Closes #369 and #755

See merge request BuildStream/buildstream!948

da735e56

by Richard Maw at 2018-11-14T13:30:34Z

_platform/linux.py: Move get_bwrap_version into _site.py

It's inconvenient to have to create a Linux platform to parse the bwrap version
and we want to get the version in a consistent manner.

e7633500

by Richard Maw at 2018-11-14T13:30:34Z

buildstream/sandbox/_sandboxbwrap.py: Distinguish sandbox failure from command failure

If `bwrap` fails to set up the sandbox and start the payload command
it won't write an exit-code in --json-status-fd,
so we can report if it was a sandboxing failure if we don't get exit-code status
and a payload command failure if we do and it's non-zero.

Closes https://gitlab.com/BuildStream/buildstream/issues/286

e9e08823

by Richard Maw at 2018-11-14T13:30:34Z

tests/testutils/site.py: Check for bwrap supporting --json-status-fd

90ca007e

by Richard Maw at 2018-11-14T13:30:34Z

tests/integration/sandbox-bwrap.py: Test distinguishing sandbox exit code from command

327b19dd

by richardmaw-codethink at 2018-11-14T13:59:16Z

Merge branch 'richardmaw/distinguish-sandboxing-build-fail' into 'master'

Distinguish between bubblewrap sandboxing failure and command failure

Closes #286

See merge request BuildStream/buildstream!868

082b3811

by Angelos Evripiotis at 2018-11-15T19:48:12Z

contributing: add guidance on unit tests

Decrease uncertainty around whether unit tests are welcome in the
project or not.

b5b79056

by Jürg Billeter at 2018-11-15T20:24:58Z

Merge branch 'aevri/unit_tests' into 'master'

contributing: add guidance on unit tests

See merge request BuildStream/buildstream!943

199bfff1

by Tom Pollard at 2018-11-17T13:07:59Z

Add cli main and user config option for 'pull-buildtrees' context.

_context.py: Add pull_buildtrees global user context, the default
of which is set to False via the addition of pull-buildtrees to
userconfig.yaml cache group.

_frontend/app.py & cli.py: Add --pull-buildtrees as a bst main
option, which when passed will override the default or user defined
context for pull_buildtrees.

tests/completions/completions.py: Update for the added flag.

454dcaf1

by Tom Pollard at 2018-11-17T13:07:59Z

Don't pull artifact build trees by default.

The addition of cached build trees being included in element
artifacts has led to mostly redundant download overheads when
pulling from a remote artifact server. As such the default behaviour
of pull shouldn't fetch the build tree object if available.

element.py: extend relevant pull logic for specified subdir
consideration and ensure push logic does not lead to partial
artifact pushes. Change assumption that the buildtree can be
extracted if artifact is cached. __cached_buildtree() and
__pull_directories() helpers added.

_artifactcache/: artifactcache.py & cascache.py inclusion of
helper functions for subdir artifact checking & fetching, fetch
logic extended to only pull required artifact directories.
extract & checkout updated to handle full/partial operation.

tests/: addition of integration test pullbuildtrees.py,
buildtrees.py adapted cli options, testutils/artifactshare.py
has_artifact changed to return artifact digest on true condition.

0d309478

by Jürg Billeter at 2018-11-17T13:49:58Z

Merge branch 'tpollard/494' into 'master'

Don't pull artifact buildtrees by default

See merge request BuildStream/buildstream!786

27932739

by Benjamin Schubert at 2018-11-19T09:46:39Z

plugins/sources/pip.py: also look for python version named "python"

In some virtual environments, we might not have the binary with the
exact python version, which would lead the current pip plugin to
fail to find a working pip version.

This adds "python" at the start of the list of valid python versions

ea2de561

by Benjamin Schubert at 2018-11-19T10:19:24Z

Merge branch 'bschubert/fix-pip-python' into 'master'

plugins/sources/pip.py: also look for python version named "python"

Closes #758

See merge request BuildStream/buildstream!942

f23b6031

by Benjamin Schubert at 2018-11-19T11:39:51Z

tests/frontend/buildtrack.py: check for success after invocation

Previously the result of the first call in test_build_track was not
checked to be successful, which would lead to potential erros later on
that were hard to debug.

Let's check it everytime

a6defc0b

by Benjamin Schubert at 2018-11-19T11:39:51Z

Fix os.rename in git source element to correctly handle error codes

According to the documentation
(https://www.unix.com/man-page/POSIX/3posix/rename/), when the directory
already is there, either EEXIST or ENOTEMPTY could be thrown.

Previously only ENOTEMPTY was checked.

Done:
  - Separated the move into its own function
  - Check for both errors
  - Create unit tests for it, covering most test cases

88089d2d

by Benjamin Schubert at 2018-11-19T11:39:51Z

Extract atomic move function to utils.py

Moving atomically a file/directory can be tricky since different
errors might be raised for the same underlying problem.

Having a utility function to reduce this discrepancies will help
in ensuring we have correct behavior

fd9e46be

by Benjamin Schubert at 2018-11-19T11:39:51Z

cascache.py: use move_atomic instead of manual error checking

d32e0b83

by Benjamin Schubert at 2018-11-19T11:39:51Z

sources/pip.py: Use move_atomic instead of manual os.rename

This uses move_atomic insteand of the manual os.rename and manual error
checking and throws a SourceError for consistency with other modules.

6f837118

by Benjamin Schubert at 2018-11-19T12:22:40Z

Merge branch 'bschubert/fix-atomic-move-git-repo' into 'master'

Fix os.rename in git source element to correctly handle error codes

See merge request BuildStream/buildstream!938

30b72244

by Chandan Singh at 2018-11-19T12:35:01Z

buildstream/_pipeline.py: Simplify error message for assert_consistent()

Currently, `Pipeline.assert_consistent()` prints an error message like
the one below when certain elements have inconsistent sources:

```
...
      Element: hello.bst is inconsistent
        Source tar source at hello.bst [line 16 column 2] is missing ref
...
```

Drop the word "Source" from the beginning of the message as
"Source <source-kind> source ..." is kind of awkward to read.

76c5d2f8

by Chandan Singh at 2018-11-19T12:35:01Z

Add `bst source-checkout` command

As discussed in
https://mail.gnome.org/archives/buildstream-list/2018-September/msg00064.html,
add `bst source-checkout` command. This will allow users to checkout
sources for a given target.

* _frontend/cli.py: Add source-checkout command
* _pipeline.py: Add assert_sources_cached() method
* _stream.py: Add source_checkout method, abstract out
  __check_location_writable() method that used to part of checkout()

9f629638

by Chandan Singh at 2018-11-19T13:03:36Z

Merge branch 'chandan/source-checkout' into 'master'

Add `bst source-checkout` command

See merge request BuildStream/buildstream!820

bc827cc8

by Abderrahim Kitouni at 2018-11-19T14:55:15Z

plugins/elements/cmake.yaml: always specify variable types

cmake sometimes misinterprets relative paths as relative to the current directory
if this is not specified. See freedesktop-sdk/freedesktop-sdk#431

adjust tests/format/variables.py accordingly.

5fbc5f41

by Valentin David at 2018-11-19T15:31:05Z

Merge branch 'abderrahim/cmake-variable-types' into 'master'

plugins/elements/cmake.yaml: always specify variable types

Closes #761

See merge request BuildStream/buildstream!947

06e28860

by Benjamin Schubert at 2018-11-19T15:52:24Z

Don't cache sandbox errors

Sandbox errors (like missing host tools) are dependent on the host
system and rarely on what is actually done.

It is therefore better to not cache them as they are subject to
change between two runs.

Also add test to ensure sandbox failure are not cached

dd36cfbc

by Benjamin Schubert at 2018-11-19T15:52:24Z

element.py: Only cache on element error or success

Reverse the way we were handling caching by only caching
when we know it's a problem with the build or the build is a
success in order not to cache transient errors.

eac7274d

by Benjamin Schubert at 2018-11-19T16:29:07Z

Merge branch 'bschubert/dont-cache-errors-from-host-tools' into 'master'

Don't cache sandbox failures

Closes #727

See merge request BuildStream/buildstream!895

625dfe1f

by Chandan Singh at 2018-11-19T16:41:17Z

NEWS: Add entry for the new source-checkout command

`bst source-checkout` command was recently added in
https://gitlab.com/BuildStream/buildstream/merge_requests/820. Add a
NEWS entry for the new command.

d4f12184

by Chandan Singh at 2018-11-19T17:15:10Z

Merge branch 'chandan/source-checkout-news' into 'master'

NEWS: Add entry for the new source-checkout command

See merge request BuildStream/buildstream!960

ba6c96e8

by Richard Maw at 2018-11-19T19:54:30Z

CasBasedDirectory: Change constructor to take a CASCache instead of a Context

The Context was only used to obtain a reference to the CASCache
and set the unused cas_directory field.

8a0dc3a3

by Jürg Billeter at 2018-11-19T19:54:30Z

tests/testutils/artifactshare.py: Do not create a fake context

The fake context did not set the cache quota, triggering an error. With
CASCache now separate from ArtifactCache, we can instantiate a CASCache
without context.

8722aced

by Jürg Billeter at 2018-11-19T19:54:30Z

tests/plugins/pipeline.py: Load context default values

fc56ffa4

by Jürg Billeter at 2018-11-19T19:54:30Z

_context.py: Drop duplicated default values for user configuration

The default values are in userconfig.yaml, together with the
documentation. The default values should not be duplicated in
_context.py.

3f663d82

by Jürg Billeter at 2018-11-19T20:36:57Z

Merge branch 'juerg/context-default-values' into 'master'

_context.py: Drop duplicated default values for user configuration

See merge request BuildStream/buildstream!953

b498cce7
by Angelos Evripiotis at 2018-11-20T11:17:38Z
```
_yaml: document node_get()'s default_value arg
```

eb2d376f

by Angelos Evripiotis at 2018-11-20T11:17:38Z

_context: allow 'terminate' for scheduler.on-error

Enable this option of 'terminate', which is mentioned in userconfig.yaml
and handled in _frontend/app.py:_handle_failure(). It appears to have
been left out of the valid_actions as an oversight.

Originally introduced in
https://gitlab.com/BuildStream/buildstream/commit/2622d5da9bd9fefd87436613d6e3e9770fdd0f28

b81c4333

by Angelos Evripiotis at 2018-11-20T11:17:38Z

_context: refactor, extract _node_get_option_str

Use a new helper function to simplify working with nodes that can only
accept certain strings. This will be used when adding the prompt.*
config options.

In later work we can see if this function would be useful elsewhere, and
could be added to '_yaml.py'.

27ca6593

by Angelos Evripiotis at 2018-11-20T11:19:33Z

Add prompt.auto-init buildstream.conf option

Provide an option in buildstream.conf to disable the 'Would you like to
...' prompt when we cannot resolve a project.

Some users prefer not to be interrupted by such prompts, so pave the way
to creating options to disable all those that might get in the way.

Follow the example of the advice.* options 'git-config', and create a
namespace for these UI options grouped by behaviour, rather than an
over-reaching 'ui.*' namespace. In later work perhaps we'll also add
'advice.*' options.

Add a NEWS item for this.

7ae3a3d2

by Angelos Evripiotis at 2018-11-20T11:43:49Z

Add prompt.workspace-... options

Provide options in project.conf to disable the 'Are you sure ...'
prompts when making destructive changes:

- Add prompt.really-workspace-close-remove-dir
- Add prompt.really-workspace-reset-hard

Add a NEWS item for these.

8071c00c

by Angelos Evripiotis at 2018-11-20T12:12:11Z

Merge branch 'aevri/prompt-config' into 'master'

Add 'prompt.*' config options to buildstream.conf

See merge request BuildStream/buildstream!887

fd41b0b5

by Raoul Hidalgo Charman at 2018-11-20T16:32:10Z

_sandboxremote.py: Add sigterm handler that sends CancelOperation

c6306b88

by Jürg Billeter at 2018-11-20T16:59:45Z

Merge branch '725-job-cancellation-on-remote-builds' into 'master'

_sandboxremote.py: Add sigterm handler that sends CancelOperation

Closes #725

See merge request BuildStream/buildstream!900

9fa8a881

by James Ennis at 2018-11-20T17:00:42Z

_yaml.py: Fix incorrect error message

This patch ensures that we receive an appropriate error
message if we specify an absolute path that leads within
the project.

fb8860db

by Jürg Billeter at 2018-11-20T17:32:58Z

Merge branch 'jennis/less_restrictive_pathways' into 'master'

Fix warning when using an absolute path which exists inside the project

See merge request BuildStream/buildstream!956

87751350