[Banshee-List] Support for Motorola Android Device - Cliq

[Brandon Turner <bturner bltweb net>]

Hello all,

I posted a few months ago asking if it would be possible to support the 
Motorola Cliq (know as Dext outside the U.S) in Banshee.  As of 1.6.0 it 
doesn't show up as a device or a USB drive in Banshee (shows up as a USB 
drive in linux).  Since it is an Android device, is this a trivial 
change?  Is there any way I could do this through a config file or 
preferences dialog?


Here's some output from lsusb and hal-device:

lsusb:
Bus 001 Device 004: ID 22b8:2d67 Motorola PCS

hal-device:
14: udi = '/org/freedesktop/Hal/devices/volume_uuid_C16A_1B0C'
  info.category = 'volume'  (string)
  block.device = '/dev/sdd1'  (string)
  block.major = 8  (0x8)  (int)
  block.minor = 49  (0x31)  (int)
  block.is_volume = true  (bool)
  linux.hotplug_type = 3  (0x3)  (int)
  info.capabilities = { 'volume', 'block' } (string list)
  block.storage_device = 
'/org/freedesktop/Hal/devices/storage_serial_Motorola_MB200_TA18808T6Y_0_0'  
(string)
  volume.fstype = 'vfat'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = 'FAT32'  (string)
  volume.uuid = 'C16A-1B0C'  (string)
  volume.label = ''  (string)
  volume.mount_point = '/media/C16A-1B0C'  (string)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.linux.is_device_mapper = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_partition = true  (bool)
  info.product = 'Volume (vfat)'  (string)
  volume.partition.number = 1  (0x1)  (int)
  volume.block_size = 512  (0x200)  (int)
  volume.num_blocks = 31116159  (0x1dacb7f)  (uint64)
  volume.size = 15931473408  (0x3b596fe00)  (uint64)
  volume.partition.start = 66048  (0x10200)  (uint64)
  volume.partition.media_size = 15931539456  (0x3b5980000)  (uint64)
  volume.ignore = false  (bool)
  org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 
'Unmount', 'Eject' } (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 
'as' } (string list)
  org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point 
fstype extra_options', 'extra_options', 'extra_options' } (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = { 
'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } 
(string list)
  volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 
'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 
'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 
'uid=', 'flush' } (string list)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_C16A_1B0C'  
(string)
  volume.unmount.valid_options = { 'lazy' } (string list)
  info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list)
  linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1'  
(string)
  info.parent = 
'/org/freedesktop/Hal/devices/storage_serial_Motorola_MB200_TA18808T6Y_0_0'  
(string)

23: udi = 
'/org/freedesktop/Hal/devices/storage_serial_Motorola_MB200_TA18808T6Y_0_0'
  info.category = 'storage'  (string)
  block.device = '/dev/sdd'  (string)
  block.major = 8  (0x8)  (int)
  block.minor = 48  (0x30)  (int)
  block.is_volume = false  (bool)
  storage.bus = 'usb'  (string)
  storage.no_partitions_hint = false  (bool)
  linux.hotplug_type = 3  (0x3)  (int)
  storage.media_check_enabled = true  (bool)
  storage.automount_enabled_hint = true  (bool)
  storage.drive_type = 'disk'  (string)
  storage.model = ' MB200'  (string)
  storage.vendor = 'Motorola'  (string)
  storage.serial = 'Motorola_MB200_TA18808T6Y-0:0'  (string)
  storage.firmware_version = '001'  (string)
  storage.lun = 0  (0x0)  (int)
  storage.originating_device = 
'/org/freedesktop/Hal/devices/usb_device_22b8_2d67_TA18808T6Y_if0'  
(string)
  storage.removable.media_available = true  (bool)
  storage.removable = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  info.vendor = 'Motorola'  (string)
  info.product = ' MB200'  (string)
  info.udi = 
'/org/freedesktop/Hal/devices/storage_serial_Motorola_MB200_TA18808T6Y_0_0'  
(string)
  storage.hotpluggable = true  (bool)
  info.capabilities = { 'storage', 'block' } (string list)
  block.storage_device = 
'/org/freedesktop/Hal/devices/storage_serial_Motorola_MB200_TA18808T6Y_0_0'  
(string)
  info.addons = { 'hald-addon-storage' } (string list)
  storage.removable.media_size = 15931539456  (0x3b5980000)  (uint64)
  storage.partitioning_scheme = 'mbr'  (string)
  info.interfaces = { 'org.freedesktop.Hal.Device.Storage.Removable' } 
(string list)
  linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/host6/target6:0:0/6:0:0:0/block/sdd'  
(string)
  info.parent = 
'/org/freedesktop/Hal/devices/usb_device_22b8_2d67_TA18808T6Y_if0_scsi_host_scsi_device_lun0'  
(string)