Re: [Banshee-List] Banshee-0.11.2

[Patrick van Staveren <trick vanstaveren us>]

Note the exceptions....
are all from not being able to connect to HAL.

Either your HAL daemon isn't functioning, D-Bus isn't functioning  
properly, or your hard drive is made of popsicle sticks.

Check to make sure that:
* D-Bus and HAL are running
** look for hald in memory
** try connecting with hal-device-manager or something
** try running dbus-viewer or dbus-monitor or something
** see if the D-Bus daemon 'dbus-daemon --system' is running

If everything seems to be running but you still can't get it to work,  
try it out as root - in the past there have been strange issues with  
D-Bus and permissions.

Good luck,

Patrick

--
Patrick "Trick" van Staveren
http://trick.vanstaveren.us


----- Message from emitrax gmail com ---------
    Date: Fri, 10 Nov 2006 16:36:40 +0100
    From: Salvatore Benedetto <emitrax gmail com>
Reply-To: banshee-list gnome org
 Subject: Re: [Banshee-List] Banshee-0.11.2
      To: banshee-list gnome org


> Yes I did. That didn't fix it.
>
> Any other idea?
>
> On 11/10/06, Josiah Ritchie <josiah ritchie gmail com> wrote:
> > Have you tried backing up your old database and telling it to create a
> > new one? It is a simply thing to check. Your database is in
> > ~/.gnome2/banshee/banshee.db
> >
> > JSR/
> >
> > On 11/9/06, Salvatore Benedetto <emitrax gmail com> wrote:
> > > I just updated to the latest version of banshee but now it goes on
> > > segmentation fault
> > > when I try to start it.
> > >
> > > emitrax xartime ~/.gnome2 $ banshee
> > >
> > > (/usr/lib/banshee/banshee.exe:8338): GdkPixbuf-WARNING **:
> > > GdkPixbufLoader finalized without calling gdk_pixbuf_loader_close() -
> > this
> > > is not allowed. You must explicitly end the data stream to the loader
> > before
> > > dropping the last reference.
> > > System.ApplicationException: Could not find org.freedesktop.Hal
> > >  in <0x00187> Hal.Manager:.ctor ()
> > > in <0x00016> Banshee.Base.HalCore:Initialize ()
> > > in (wrapper delegate-invoke)
> > > System.MulticastDelegate:invoke_void ()
> > >  in <0x00083> Banshee.Base.ComponentInitializer:Run ()
> > >  Warning: [11/09/2006 21:26:54] (Cannot connect to NetworkManager) - An
> > > available, working network connection will be assumed
> > >  Creating track table
> > > Creating playlists table
> > >  Creating playlistentries table
> > > Debug: [11/09/2006 21:26:57] (Loading audio profiles) -
> > > /usr/share/banshee/audio-profiles
> > >
> > > (/usr/lib/banshee/banshee.exe:8338): GLib-GObject-WARNING
> > > **: value "128" of type `gint' is invalid or out of range for property
> > > `bitrate' of type `gint'
> > > Debug: [11/09/2006 21:26:58] (Default player engine) - GStreamer 0.10
> > >  System.ApplicationException: HAL is not initialized
> > > in <0x0012f> Banshee.Base.AudioCdCore:.ctor ()
> > > in <0x00016> Banshee.Base.Globals:<#AnonymousMethod>77 ()
> > >  in (wrapper delegate-invoke)
> > > System.MulticastDelegate:invoke_void ()
> > >  in <0x00083> Banshee.Base.ComponentInitializer:Run ()
> > > System.ApplicationException: Cannot initialize DapCore because HalCore
> > is
> > > not initialized
> > > in <0x000f9> Banshee.Dap.DapCore:Initialize ()
> > >  in (wrapper delegate-invoke)
> > > System.MulticastDelegate:invoke_void ()
> > >  in <0x00083> Banshee.Base.ComponentInitializer:Run ()
> > > Segmentation fault
> > >
> > > Version of mono is 1.1.18-r1
> > >
> > > I'm using Gentoo if that can help. Kernel version 2.6.17.6
> > >
> > > Regards
> > > Salvo
> > >
> > > _______________________________________________
> > > Banshee-list mailing list
> > > Banshee-list gnome org
> > > http://mail.gnome.org/mailman/listinfo/banshee-list
> >
> >
> > --
> > Our Mission
> > Technology and Hospitality for God's Workmen
> > http://missions.ritchietribe.net
> > _______________________________________________
> > Banshee-list mailing list
> > Banshee-list gnome org
> > http://mail.gnome.org/mailman/listinfo/banshee-list


----- End message from emitrax gmail com -----