[glib] Remove duplicate copies of migration docs
- From: Ryan Lortie <ryanl src gnome org>
- To: commits-list gnome org
- Cc:
- Subject: [glib] Remove duplicate copies of migration docs
- Date: Thu, 27 May 2010 17:12:52 +0000 (UTC)
commit f2687f588e3a2b338242d73b6898eb93689b264b
Author: Ryan Lortie <desrt desrt ca>
Date: Thu May 27 13:07:54 2010 -0400
Remove duplicate copies of migration docs
Fixup for commit 133f66538dbf266be3c99b34f1eeee0a5e6068ac which
duplicated the contents of most of the migration documentation by
splitting it out into separate files but keeping the original file
intact (with a rename).
This removes the duplicated content from the renamed file.
docs/reference/gio/migrating-posix.xml | 554 --------------------------------
1 files changed, 0 insertions(+), 554 deletions(-)
---
diff --git a/docs/reference/gio/migrating-posix.xml b/docs/reference/gio/migrating-posix.xml
index df711af..e7dc9f4 100644
--- a/docs/reference/gio/migrating-posix.xml
+++ b/docs/reference/gio/migrating-posix.xml
@@ -24,558 +24,4 @@
</table>
</chapter>
-
- <chapter>
- <title>Migrating from GnomeVFS to GIO</title>
-
- <table id="gnome-vfs-vs-gio">
- <title>Comparison of GnomeVFS and GIO concepts</title>
- <tgroup cols="2">
- <thead>
- <row><entry>GnomeVFS</entry><entry>GIO</entry></row>
- </thead>
- <tbody>
- <row><entry>GnomeVFSURI</entry><entry>GFile</entry></row>
- <row><entry>GnomeVFSFileInfo</entry><entry>GFileInfo</entry></row>
- <row><entry>GnomeVFSResult</entry><entry>GError, with G_IO_ERROR values</entry></row>
- <row><entry>GnomeVFSHandle & GnomeVFSAsyncHandle</entry><entry>GInputStream or GOutputStream</entry></row>
- <row><entry>GnomeVFSDirectoryHandle</entry><entry>GFileEnumerator</entry></row>
- <row><entry>mime type</entry><entry>content type</entry></row>
- <row><entry>GnomeVFSMonitor</entry><entry>GFileMonitor</entry></row>
- <row><entry>GnomeVFSVolumeMonitor</entry><entry>GVolumeMonitor</entry></row>
- <row><entry>GnomeVFSVolume</entry><entry>GMount</entry></row>
- <row><entry>GnomeVFSDrive</entry><entry>GVolume</entry></row>
- <row><entry>-</entry><entry>GDrive</entry></row>
- <row><entry>GnomeVFSContext</entry><entry>GCancellable</entry></row>
- <row><entry>gnome_vfs_async_cancel</entry><entry>g_cancellable_cancel</entry></row>
- </tbody>
- </tgroup>
- </table>
-
- <section>
- <title>Trash handling</title>
-
- <para>
- The handling of trashed files has been changed in GIO, compared
- to gnome-vfs. gnome-vfs has a home-grown trash implementation that
- predates the freedesktop.org <ulink url="http://www.freedesktop.org/wiki/Specifications/trash-spec";>Desktop Trash Can</ulink> specification
- that is implemented in GIO. The location for storing trashed files
- has changed from <filename>$HOME/.Trash</filename> to
- <filename>$HOME/.local/share/Trash</filename> (or more correctly
- <filename>$XDG_DATA_HOME/Trash</filename>), which means that
- there is a need for migrating files that have been trashed by
- gnome-vfs to the new location.
- </para>
- <para>
- In gnome-vfs, the <filename>trash://</filename> scheme offering a
- merged view of all trash directories was implemented in nautilus,
- and trash-handling applications had to find and monitor all trash
- directories themselves. With GIO, the <filename>trash://</filename>
- implementation has been moved to gvfs and applications can simply
- monitor that location:
- </para>
-<informalexample><programlisting>
-static void
-file_changed (GFileMonitor *file_monitor,
- GFile *child,
- GFile *other_file,
- GFileMonitorEvent event_type,
- gpointer user_data)
-{
- switch (event_type)
- {
- case G_FILE_MONITOR_EVENT_DELETED:
- g_print ("'%s' removed from trash\n", g_file_get_basename (child));
- break;
- case G_FILE_MONITOR_EVENT_CREATED:
- g_print ("'%s' added to trash\n", g_file_get_basename (child));
- break;
- default: ;
- }
-}
-
-static void
-start_monitoring_trash (void)
-{
- GFile *file;
- GFileMonitor *monitor;
-
- file = g_file_new_for_uri ("trash://");
- monitor = g_file_monitor_directory (file, 0, NULL, NULL);
- g_object_unref (file);
-
- g_signal_connect (monitor, "changed", G_CALLBACK (file_changed), NULL);
-
- /* ... */
-
-}
-</programlisting></informalexample>
- <para>
- GIO exposes some useful metadata about trashed files. There are
- trash::orig-path and trash::deletion-date attributes. The
- standard::icon attribute of the <filename>trash://</filename>
- itself provides a suitable icon for displaying the trash can on
- the desktop. If you are using this icon, make sure to monitor
- this attribute for changes, since the icon may be updated to
- reflect that state of the trash can.
- </para>
- <para>
- Moving a file to the trash is much simpler with GIO. Instead of
- using gnome_vfs_find_directory() with %GNOME_VFS_DIRECTORY_KIND_TRASH
- to find out where to move the trashed file, just use the g_file_trash()
- function.
- </para>
- </section>
-
- <section>
- <title>Operations on multiple files</title>
-
- <para>
- gnome-vfs has the dreaded gnome_vfs_xfer_uri_list() function which
- has tons of options and offers the equivalent of cp, mv, ln, mkdir
- and rm at the same time.
- </para>
- <para>
- GIO offers a much simpler I/O scheduler functionality instead, that
- lets you schedule a function to be called in a separate thread, or
- if threads are not available, as an idle in the mainloop.
- See g_io_scheduler_push_job().
- </para>
-
- </section>
-
- <section>
- <title>Mime monitoring</title>
-
- <para>
- gnome-vfs offered a way to monitor the association between mime types
- and default handlers for changes, with the #GnomeVFSMIMEMonitor object.
- GIO does not offer a replacement for this functionality at this time,
- since we have not found a compelling use case where
- #GnomeVFSMIMEMonitor was used. If you think you have such a use
- case, please report it at
- <ulink url="http://bugzilla.gnome.org";>bugzilla.gnome.org</ulink>.
- </para>
- </section>
- </chapter>
-
- <chapter>
- <title>Migrating from GConf to GSettings</title>
-
- <section>
- <title>Before you start</title>
-
- <para>
- Converting individual applications and their settings from GConf to
- GSettings can be done at will. But desktop-wide settings like font or
- theme settings often have consumers in multiple modules. Therefore,
- some consideration has to go into making sure that all users of a setting
- are converted to GSettings at the same time or that the program
- responsible for configuring that setting continues to update the value in
- both places.
- </para>
- <para>
- It is always a good idea to have a look at how others have handled
- similar problems before. An examplaric conversion can be found e.g.
- in the <ulink url="http://git.gnome.org/browse/gnome-utils/log/?h=gsettings-tutorial";>gsettings-tutorial</ulink> branch of gnome-utils.
- </para>
- </section>
-
- <section>
- <title>Conceptual differences</title>
-
- <para>
- Conceptually, GConf and GSettings are fairly similar. Both
- have a concept of pluggable backends. Both keep information
- about keys and their types in schemas. Both have a concept of
- mandatory values, which lets you implement lock-down.
- </para>
- <para>
- There are some differences in the approach to schemas. GConf
- installs the schemas into the database and has API to handle
- schema information (gconf_client_get_default_from_schema(),
- gconf_value_get_schema(), etc). GSettings on the other hand
- assumes that an application knows its own schemas, and does
- not provide API to handle schema information at runtime.
- GSettings is also more strict about requiring a schema whenever
- you want to read or write a key. To deal with more free-form
- information that would appear in schema-less entries in GConf,
- GSettings allows for schemas to be 'relocatable'.
- </para>
- <para>
- One difference in the way applications interact with their
- settings is that with GConf you interact with a tree of
- settings (ie the keys you pass to functions when reading
- or writing values are actually paths with the actual name
- of the key as the last element. With GSettings, you create
- a GSettings object which has an implicit prefix that determines
- where the settings get stored in the global tree of settings,
- but the keys you pass when reading or writing values are just
- the key names, not the full path.
- </para>
- </section>
-
- <section>
- <title>GConfClient (and GConfBridge) API conversion</title>
-
- <para>
- Most people use GConf via the high-level #GConfClient API.
- The corresponding API is the #GSettings object. While not
- every GConfClient function has a direct GSettings equivalent,
- many do:
- <table id="gconf-client-vs-gsettings">
- <tgroup cols="2">
- <thead>
- <row><entry>GConfClient</entry><entry>GSettings</entry></row>
- </thead>
- <tbody>
- <row><entry>gconf_client_get_default()</entry><entry>no direct equivalent,
- instead you call g_settings_new() for the schemas you use</entry></row>
- <row><entry>gconf_client_set()</entry><entry>g_settings_set()</entry></row>
- <row><entry>gconf_client_get()</entry><entry>g_settings_get()</entry></row>
- <row><entry>gconf_client_get_bool()</entry><entry>g_settings_get_boolean()</entry></row>
- <row><entry>gconf_client_set_bool()</entry><entry>g_settings_set_boolean()</entry></row>
- <row><entry>gconf_client_get_int()</entry><entry>g_settings_get_int()</entry></row>
- <row><entry>gconf_client_set_int()</entry><entry>g_settings_set_int()</entry></row>
- <row><entry>gconf_client_get_float()</entry><entry>g_settings_get_double()</entry></row>
- <row><entry>gconf_client_set_float()</entry><entry>g_settings_set_double()</entry></row>
- <row><entry>gconf_client_get_string()</entry><entry>g_settings_get_string()</entry></row>
- <row><entry>gconf_client_set_string()</entry><entry>g_settings_set_string()</entry></row>
- <row><entry>gconf_client_get_list()</entry><entry>for string lists, see g_settings_get_strv(), else see g_settings_get_value() and #GVariant API</entry></row>
- <row><entry>gconf_client_set_list()</entry><entry>for string lists, see g_settings_set_strv(), else see g_settings_set_value() and #GVariant API</entry></row>
- <row><entry>gconf_entry_get_is_writable()</entry><entry>g_settings_is_writable()</entry></row>
- <row><entry>gconf_client_notify_add()</entry><entry>not required, the #GSettings::changed signal is emitted automatically</entry></row>
- <row><entry>gconf_client_add_dir()</entry><entry>not required, each GSettings instance automatically watches all keys in its path</entry></row>
- <row><entry>#GConfChangeSet</entry><entry>g_settings_delay(), g_settings_apply()</entry></row>
- <row><entry>gconf_client_get_default_from_schema()</entry><entry>no equivalent, applications are expected to know their schema</entry></row>
- <row><entry>gconf_client_all_entries()</entry><entry>no equivalent, applications are expected to know their schema, and GSettings does not allow schema-less entries</entry></row>
- <row><entry>gconf_client_get_without_default()</entry><entry>no equivalent</entry></row>
- <row><entry>gconf_bridge_bind_property()</entry><entry>g_settings_bind()</entry></row>
- <row><entry>gconf_bridge_bind_property_full()</entry><entry>g_settings_bind_with_mapping()</entry></row>
- </tbody>
- </tgroup>
- </table>
- </para>
- <para>
- GConfBridge was a third-party library that used GConf to bind an object property
- to a particular configuration key. GSettings offers this service itself.
- </para>
- <para>
- There is a pattern that is sometimes used for GConf, where a setting can have
- explicit 'value A', explicit 'value B' or 'use the system default'. With GConf,
- 'use the system default' is sometimes implemented by unsetting the user value.
- </para>
- <para>
- This is not possible in GSettings, since it does not have API to determine if a value
- is the default and does not let you unset values. The recommended way (and much
- clearer) way in which this can be implemented in GSettings is to have a separate
- 'use-system-default' boolean setting.
- </para>
- </section>
-
- <section>
- <title>Change notification</title>
-
- <para>
- GConf requires you to call gconf_client_add_dir() and
- gconf_client_notify_add() to get change notification. With
- GSettings, this is not necessary; signals get emitted automatically
- for every change.
- </para>
- <para>
- The #GSettings::changed signal is emitted for each changed key.
- There is also a #GSettings::change-event signal that you can handle
- if you need to see groups of keys that get changed at the same time.
- </para>
- <para>
- GSettings also notifies you about changes in writability of keys,
- with the #GSettings::writable-changed signal (and the
- #GSettings::writable-change-event signal).
- </para>
- </section>
-
- <section><title>Change sets</title>
- <para>
- GConf has a a concept of a set of changes which can be applied or reverted
- at once: #GConfChangeSet (GConf doesn't actually apply changes atomically,
- which is one of its shortcomings).
- </para>
- <para>
- Instead of a separate object to represent a change set, GSettings has a
- 'delayed-apply' mode, which can be turned on for a GSettings object by
- calling g_settings_delay(). In this mode, changes done to the GSettings
- object are not applied - they are still visible when calling g_settings_get()
- <emphasis>on the same object</emphasis>, but not to other GSettings instances
- or even other processes.
- </para>
- <para>
- To apply the pending changes all at once (GSettings <emphasis>does</emphasis>
- atomicity here), call g_settings_apply(). To revert the pending changes,
- call g_settings_revert() or just drop the reference to the #GSettings object.
- </para>
- </section>
-
- <section>
- <title>Schema conversion</title>
-
- <para>
- If you are porting your application from GConf, most likely you already
- have a GConf schema. GIO comes with a commandline tool
- <link linkend="gsettings-schema-convert">gsettings-schema-convert</link>
- that can help with the task of converting a GConf schema into
- an equivalent GSettings schema. The tool is not perfect and
- may need assistence in some cases.
- </para>
- <example><title>An example for using gsettings-schema-convert</title>
- <para>Running <userinput>gsettings-schema-convert --gconf --xml --schema-id "org.gnome.font-rendering" --output org.gnome.font-rendering.gschema.xml destop_gnome_font_rendering.schemas</userinput> on the following <filename>desktop_gnome_font_rendering.schemas</filename> file:
- <programlisting>
-<![CDATA[
-<?xml version="1.0"?>
-<gconfschemafile>
- <schemalist>
- <schema>
- <key>/schemas/desktop/gnome/font_rendering/dpi</key>
- <applyto>/desktop/gnome/font_rendering/dpi</applyto>
- <owner>gnome</owner>
- <type>int</type>
- <default>96</default>
- <locale name="C">
- <short>DPI</short>
- <long>The resolution used for converting font sizes to pixel sizes, in dots per inch.</long>
- </locale>
- </schema>
- </schemalist>
-</gconfschemafile>
-]]>
-</programlisting>
-produces a <filename>org.gnome.font-rendering.gschema.xml</filename> file with the following content:
-<programlisting>
-<![CDATA[
-<schemalist>
- <schema id="org.gnome.font-rendering" path="/desktop/gnome/font_rendering/">
- <key name="dpi" type="i">
- <default>96</default>
- <summary>DPI</summary>
- <description>The resolution used for converting font sizes to pixel sizes, in dots per inch.</description>
- </key>
- </schema>
-</schemalist>
-]]>
-</programlisting>
-</para>
- </example>
-
- <para>
- GSettings schemas are identified at runtime by their id (as specified
- in the XML source file). It is recommended to use a dotted name as schema
- id, similar in style to a DBus bus name, e.g. "org.gnome.font-rendering".
- The filename used for the XML schema source is immaterial, but
- schema compiler expects the files to have the extension
- <filename>.gschema.xml</filename>. It is recommended to simply
- use the schema id as the filename, followed by this extension,
- e.g. <filename>org.gnome.font-rendering.gschema.xml</filename>.
- </para>
-
- <para>
- The XML source file for your GSettings schema needs to get installed
- into <filename>$datadir/glib-2.0/schemas</filename>, and needs to be
- compiled into a binary form. At runtime, GSettings looks for compiled
- schemas in the <filename>glib-2.0/schemas</filename> subdirectories
- of all <envar>XDG_DATA_DIRS</envar> directories, so if you install
- your schema in a different location, you need to set the
- <envar>XDG_DATA_DIRS</envar> environment variable appropriately.
- </para>
- <para>
- Schemas are compiled into binary form by the
- <link linkend="glib-compile-schemas">glib-compile-schemas</link> utility.
- GIO provides a <literal>gschema_compile</literal>
- variable for the schema compiler, which can be used in
- <filename>configure.in</filename> as follows:
-<programlisting>
-GLIB_GSETTINGS
-</programlisting>
- The corresponding <filename>Makefile.am</filename> fragment looks like
- this:
-<programlisting>
-# gsettingsschemadir and gschema_compile are defined by the GLIB_GSETTINGS
-# macro in configure.ac
-gsettingsschema_DATA = my.app.gschema.xml
-# This rule will check your schemas for validity before installation
- GSETTINGS_CHECK_RULE@
-if GSETTINGS_SCHEMAS_INSTALL
-install-data-hook:
- $(GLIB_COMPILE_SCHEMAS) $(DESTDIR)$(gsettingsschemadir)
-endif
-</programlisting>
- </para>
-
- <para>
- One possible pitfall in doing schema conversion is that the default
- values in GSettings schemas are parsed by the #GVariant parser.
- This means that strings need to include quotes in the XML. Also note
- that the types are now specified as #GVariant type strings.
- <programlisting>
-<![CDATA[
-<type>string</type>
-<default>rgb</default>
-]]>
- </programlisting>
- becomes
- <programlisting>
-<![CDATA[
-<key name="rgba-order" type="s">
- <default>'rgb'</default> <!-- note quotes -->
-</key>
-]]>
- </programlisting>
- </para>
- <para>
- Another possible complication is that GConf specifies full paths
- for each key, while a GSettings schema has a 'path' attribute that
- contains the prefix for all the keys in the schema, and individual
- keys just have a simple name. So
- <programlisting>
-<![CDATA[
-<key>/schemas/desktop/gnome/font_rendering/antialiasing</key>
-]]>
- </programlisting>
- becomes
- <programlisting>
-<![CDATA[
-<schema id="org.gnome.font" path="/desktop/gnome/font_rendering/">
- <key name="antialiasing" type="s">
-]]>
- </programlisting>
- </para>
- <para>
- Default values can be localized in both GConf and GSettings schemas,
- but GSettings uses gettext for the localization. You can specify
- the gettext domain to use in the <tag class="attribute">gettext-domain</tag>
- attribute. Therefore, when converting localized defaults in GConf,
- <programlisting>
-<![CDATA[
-<key>/schemas/apps/my_app/font_size</key>
- <locale name="C">
- <default>18</default>
- </locale>
- <locale name="be">
- <default>24</default>
- </locale>
-</key>
-]]>
- </programlisting>
- becomes
- <programlisting>
-<![CDATA[
-<schema id="..." gettext-domain="your-domain">
- ...
-<key name="font-size" type="i">
- <default l10n="messages" context="font_size">18</default>
-</key>
-]]>
- </programlisting>
- Note how we used the context attribute to add msgctxt - "18" is not a
- good string to look up in gettext by itself. Also note that the value
- 24 is not present in the schema anymore. It has to be added to the
- gettext catalog for "be" instead.
- </para>
- <para>
- GSettings schemas have optional <tag class="starttag">summary</tag> and
- <tag class="starttag">description</tag> elements for each key which
- correspond to the <tag class="starttag">short</tag> and
- <tag class="starttag">long</tag> elements in the GConf schema and
- will be used in similar ways by a future gsettings-editor, so you
- should use the same conventions for them: The summary is just a short
- label with no punctuation, the description can be one or more complete
- sentences. Translations for these strings will also be handled
- via gettext, so you should arrange for these strings to be
- extracted into your gettext catalog.
- </para>
- <para>
- GSettings is a bit more restrictive about key names than GConf. Key
- names in GSettings can be at most 32 characters long, and must only
- consist of lowercase characters, numbers and dashes, with no
- consecutive dashes. The first character must not be a number or dash,
- and the last character cannot be '-'.
- </para>
- <para>
- If you are using the GConf backend for GSettings during the
- transition, you may want to keep your key names the same they
- were in GConf, so that existing settings in the users GConf
- database are preserved. You can achieve this by using the
- <option>--allow-any-name</option> with the
- <link linkend="glib-compile-schemas">glib-compile-schemas</link> schema
- compiler. Note that this option is only meant
- to ease the process of porting your application, allowing parts
- of your application to continue to access GConf and parts to use
- GSettings. By the time you have finished porting your application
- you must ensure that all key names are valid.
- </para>
- </section>
-
- <section><title>Data conversion</title>
- <para>
- GConf comes with a GSettings backend that can be used to
- facility the transition to the GSettings API until you are
- ready to make the jump to a different backend (most likely
- dconf). To use it, you need to set the <envar>GSETTINGS_BACKEND</envar>
- to 'gconf', e.g. by using
-<programlisting>
- g_setenv ("GSETTINGS_BACKEND", "gconf", TRUE);
-</programlisting>
- early on in your program. Note that this backend is meant purely
- as a transition tool, and should not be used in production.
- </para>
- <para>
- GConf also comes with a utility called
- <command>gsettings-data-convert</command>, which is designed to help
- with the task of migrating user settings from GConf into another
- GSettings backend. It can be run manually, but it is designed to be
- executed automatically, every time a user logs in. It keeps track of
- the data migrations that it has already done, and it is harmless to
- run it more than once.
- </para>
- <para>
- To make use of this utility, you must install a keyfile in the
- directory <filename>/usr/share/GConf/gsettings</filename> which
- lists the GSettings keys and GConf paths to map to each other, for
- each schema that you want to migrate user data for.
- </para>
- <para>
- Here is an example:
- <programlisting>
-<![CDATA[
-[org.gnome.fonts]
-antialiasing = /desktop/gnome/font_rendering/antialiasing
-dpi = /desktop/gnome/font_rendering/dpi
-hinting = /desktop/gnome/font_rendering/hinting
-rgba-order = /desktop/gnome/font_rendering/rgba_order
-
-[apps.myapp:/path/to/myapps/]
-some-odd-key1 = /apps/myapp/some_ODD-key1
-]]>
- </programlisting>
- The last key demonstrates that it may be necessary to modify the key
- name to comply with stricter GSettings key name rules. Of course,
- that means your application must use the new key names when looking
- up settings in GSettings.
- </para>
- <para>
- The last group in the example also shows how to handle the case
- of 'relocatable' schemas, which don't have a fixed path. You can
- specify the path to use in the group name, separated by a colon.
- </para>
- <para>
- There are some limitations: <command>gsettings-data-convert</command>
- does not do any transformation of the values. And it does not handle
- complex GConf types other than lists of strings or integers.
- </para>
- <para>
- Don't forget to require GConf 2.31.1 or newer in your configure
- script if you are making use of the GConf backend or the conversion
- utility.
- </para>
- </section>
- </chapter>
-
</part>
[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Thread Index]
[
Date Index]
[
Author Index]
