> On Tue, 2018-12-11 at 20:12 +0100, Thomas Haller wrote:
> > On Tue, 2018-12-11 at 12:38 +0200, Berend De Schouwer via
> > networkmanager-list wrote:
> > > On Tue, 2018-12-11 at 10:58 +0100, Thomas Haller wrote:
> > > > On Tue, 2018-12-11 at 10:41 +0200, Berend De Schouwer wrote:
> > > > > On Mon, 2018-12-10 at 17:22 +0100, Thomas Haller wrote:
> > > > > > On Mon, 2018-12-10 at 12:15 +0200, Berend De Schouwer via
> > > >
> > > > Hi Berend,
> > > >
> > > >
> > > > : ifindex=3 (wlan0) alg=4
> > > > addr=0xaaaae5906648 key_idx=4 set_tx=1 seq_len=0 key_len=16
> > > > nl80211: set_key failed; err=-22 Invalid argument)
> > > > WPA: group state machine entering state FATAL_FAILURE
> > > >
> > > > Beniamino said, "alg=4 is the IGTK, that should be required by
> > > > PMF."
> > > > Maybe try:
> > > >
> > > > nmcli connection modify "$PROFILE" wifi.pmf disable
> > > >
> > > > and reactivate the profile.
> > >
> > > That fixed it! Thanks Beniamino and Thomas.
> > >
> > > wifi.pmf disable resulted in alg=2:
> > >
> > > Dec 11 12:35:16 morgue.deschouwer.co.za NetworkManager[839]:
> > > <info> [1544524516.5910] device (wlan0): Activation: (wifi) Stage
> > > 2
> > > of 5 (Device Configure) successful. Started Wi-Fi Hotspot
> > > 'HotelGUI'.
> > > Dec 11 12:35:16 morgue.deschouwer.co.za wpa_supplicant[2426]:
> > > wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=2
> > > addr=0xaaaace5e1648 key_idx=1 set_tx=1 seq_len=0 key_len=32
> > > Dec 11 12:35:16 morgue.deschouwer.co.za wpa_supplicant[2426]:
> > > nl80211: KEY_DATA - hexdump(len=32): [REMOVED]
> > > Dec 11 12:35:16 morgue.deschouwer.co.za
> > > wpa_supplicant[2426]: broadcast key
> > > Dec 11 12:35:16 morgue.deschouwer.co.za wpa_supplicant[2426]:
> > > nl80211: Set wlan0 operstate 0->1 (UP)
> > > Dec 11 12:35:16 morgue.deschouwer.co.za wpa_supplicant[2426]:
> > > netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=6
> > > (IF_OPER_UP)
> > > Dec 11 12:35:16 morgue.deschouwer.co.za wpa_supplicant[2426]:
> > > wlan0:
> > > interface state UNINITIALIZED->ENABLED
> > > Dec 11 12:35:16 morgue.deschouwer.co.za wpa_supplicant[2426]:
> > > wlan0:
> > > AP-ENABLED
> > > Dec 11 12:35:16 morgue.deschouwer.co.za wpa_supplicant[2426]:
> > > wlan0:
> > > State: SCANNING -> COMPLETED
> >
> > Hi,
> >
> > good to know. I wonder whether this is a bug in NetworkManager. If
> > you
> > leave pmf at "0 (default)", it seems it should just work.
> >
> >
> > best,
> > Thomas
>
> nmcli describes the default as "optionally enabled", which would
> indicate that this behaviour is a bug.
>
> You could view it as a bug in NetworkManager or wpa_supplicant, or the
> driver. Which layer needs the change?
>
> Also, now that I know what I'm looking for, there's this:
> https://fedoramagazine.org/troubleshoot-pmf-f28/