Re: PAP Phase 2 supported ?

[Nicolas Will <nico rdo homelinux org>]

Shall I understand that PAP Pahse 2 auth is not supported at all, abd
that it is, so far, intentional, and not a bug?

Nico



Le jeudi 06 avril 2006 à 10:20 -0500, Nicolas Will a écrit :
> On Wed, 2006-04-05 at 17:46 -0500, Nicolas Will wrote:
> > Hi,
> >
> > I'm new to the list.
> >
> > My company has quite weird requirements for Wi-Fi in the office.
> >
> > It uses WPA EAP-TTLS with PAP phase 2 authentication. It basically
> > changes WEP104 keys regularly.
> > The access points hide their SSID.
> >
> > I used to have a manual wpa_supplicant config that worked quite well.
> >
> > I am now running the following:
> >
> >     * Dell D610 laptop
> >     * Intel 2915abg wireless card
> >     * Ubuntu Dapper
> >     * Linux 2.6.15-20 686 official kernel
> >           o ipw2200 1.1.1
> >           o ieee80211 1.1.7
> >           o ipw firmware 1.3
> >     * NetworkManager 0.6.2
> >     * wpa_supplicant 0.4.8
> >
> >
> > In nm-applet, I do not see any setting for PAP phase 2. Is it supported?
> >
> > Here is a wpasupplicant.conf that worked:
> >
> >     #  Please see /usr/share/doc/wpasupplicant/wpa_supplicant.conf.gz
> >     #  for more complete configuration parameters.
> >
> >     ctrl_interface=/var/run/wpa_supplicant
> >     ctrl_interface_group=0
> >
> >     # This is needed for ipw driver and hidden SSIDs
> >     ap_scan=2
> >
> >     # "Dynamic WEP" EAP-TTLS/PAP configuration with anonymous identity
> >     for the unencrypted
> >     # use. Real identity is sent only within an encrypted TLS tunnel.
> >
> >     network={
> >             ssid="MyHiddenSSID"
> >             scan_ssid=1
> >             mode=0
> >             proto=WPA
> >             key_mgmt=WPA-EAP
> >             auth_alg=OPEN
> >             pairwise=TKIP
> >             group=WEP104
> >             eap=TTLS
> >             anonymous_identity="MyBogusIdentity"
> >             identity="MyRADIUSusername"
> >             ca_cert="PathToMyCAcert"
> >             password="MyRADIUSpassword"
> >             phase2="auth=PAP"
> >     }
> >
> > wpasupplicant was started with the following options:
> >
> >     OPTIONS="-i eth1 -D ipw -c /etc/wpa_supplicant.conf -w"
> >
> >
> > Using NetworkManager 0.6.2, I cannot go through Phase 2 using any Key
> > Type (AES, TKIP, Dynamic WEP).
> > The AP is found, Phase 1 looks OK.
> >
> > Any direction ?
> >   
> 
> 
> OK, for logs lovers, here they are:
> 
> http://rdo.homelinux.org/~will/nm_test/
> <http://rdo.homelinux.org/%7Ewill/nm_test/>
> 
> There are 2 failures using NM with different settings, and one success
> using wpa_supplicant manually.
> 
> I noticed that wpa_supplicant now requires the wext driver and not ipw
> for my card now.
> 
> Thanks for any help in this matter.
> 
> Nico
> 
> _______________________________________________
> NetworkManager-list mailing list
> NetworkManager-list gnome org
> http://mail.gnome.org/mailman/listinfo/networkmanager-list