Re: [Evolution] palm treo 600 sync

[lance raymond <techy darkerforce com>]

Sorry, I am running FC4 and as for evo-pilot, can't seem to find a
version even close.  The only one comes from the old ximian days.

There is a SUSE version which has numerous dependencies, before I
attempt that attack, any other ideas ?

tnx again ...

lr

On Sun, 2005-11-27 at 10:14 +1100, Andrew Greig wrote:
> Hi,
> You haven't told us what distro and version you are using.  Have you
> installed evolution-pilot?  I suspect not, because the conduits which
> you are missing normally only turn up after it's installed.
> 
> To see if the kernel is handling the synch OK you could see how you get
> on with JPilot.
> 
> Andrew Greig
> Melbourne, Australia
> 
> 
> 
> 
> On Fri, 2005-11-25 at 09:23 -0500, Techy wrote:
> > ok, this is the biggie, I have (as you saw from the subject) a palm
> > treo
> > 600 which I want to sync with evo and have had no luck with.  The
> > basics
> > are;
> > 
> > HW: Dell Inspiron 300M
> > Palm connecting via USB.
> > 
> > When I connect the 1st time, I do get a connect on the palm quick
> > sync,
> > clean-up and that's it.  message file shows:
> > --------------------------------------------------------------------------
> > Nov 23 11:01:52 vader kernel: drivers/usb/serial/usb-serial.c: USB
> > Serial suppor t registered for Sony Clie 5.0
> > Nov 23 11:01:52 vader kernel: visor 2-1:1.0: Handspring Visor / Palm
> > OS
> > converte r detected
> > Nov 23 11:01:52 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > converter now attached to ttyUSB0
> > Nov 23 11:01:52 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > converter now attached to ttyUSB1
> > Nov 23 11:01:52 vader kernel: usbcore: registered new driver visor
> > Nov 23 11:01:52 vader kernel: drivers/usb/serial/visor.c: USB
> > HandSpring
> > Visor /  Palm OS driver v2.1
> > Nov 23 11:02:01 vader kernel: usb 2-1: USB disconnect, address 4
> > ---------------------------------------------------------------------------
> > If I try to re-sync I get:
> > Nov 23 11:05:47 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > converter now attached to ttyUSB2
> > Nov 23 11:05:47 vader kernel: usb 2-1: Handspring Visor / Palm OS
> > converter now attached to ttyUSB3
> > Nov 23 11:05:49 vader kernel: visor ttyUSB1: visor_write -
> > usb_submit_urb(write bulk) failed with status = -19
> > Nov 23 11:06:01 vader last message repeated 2 times
> > Nov 23 11:06:02 vader kernel: usb 2-1: USB disconnect, address 5
> > ---------------------------------------------------------------------------
> > 
> > One thing I noticed, in Tools/Pilot/Conduits I only see:
> > Expense
> > MAL
> > MemoFile
> > Sendmail
> > Time
> > (all of which are disabled except Memofile)
> > 
> > I thought a while back this is where I put contacts, calendar, to-do,
> > etc. the things I really want to sync.
> > 
> > Also, if I do a pilot-xfer -L -p /tmp/pilot wait a sec, hit the sync
> > button I get a connect success and it does list all the apps / files.
> > And it currently sync's 100% with JPilot which is okay, but I use evo
> > 100% and to swich apps for things like that are foolish.
> > 
> > Any help / direction is appreciated.
> > 
> > Lance 
> > _______________________________________________
> > Evolution-list mailing list
> > Evolution-list gnome org
> > http://mail.gnome.org/mailman/listinfo/evolution-list
> Andrew Greig
> ABN 52 219 423 734
> 15 Leslie Ave Boronia Vic 3155
> 0418 581 649
> algreig bigpond net au
> 
> 
> 
> 
> Yours faithfully
> 
> Andrew

-- 
lance raymond <techy darkerforce com>